--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/webengine/osswebengine/WebKit/WebView/WebResourceLoadDelegate.h	Mon Mar 30 12:54:55 2009 +0300
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2003, 2004, 2005 Apple Computer, Inc.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1.  Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer. 
+ * 2.  Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution. 
+ * 3.  Neither the name of Apple Computer, Inc. ("Apple") nor the names of
+ *     its contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#if MAC_OS_X_VERSION_MAX_ALLOWED <= MAC_OS_X_VERSION_10_4
+#define WebNSInteger int
+#else
+#define WebNSInteger NSInteger
+#endif
+
+@class WebView;
+@class WebDataSource;
+@class NSURLAuthenticationChallenge;
+@class NSURLResponse;
+@class NSURLRequest;
+
+/*!
+    @category  WebResourceLoadDelegate
+    @discussion Implementors of this protocol will receive messages indicating
+    that a resource is about to be loaded, data has been received for a resource,
+    an error has been received for a resource, and completion of a resource load.
+    Implementors are also given the opportunity to mutate requests before they are sent.
+    The various progress methods of this protocol all receive an identifier as the
+    parameter.  This identifier can be used to track messages associated with a single
+    resource.  For example, a single resource may generate multiple 
+    resource:willSendRequest:redirectResponse:fromDataSource: messages as it's URL is redirected.
+*/
+@interface NSObject (WebResourceLoadDelegate)
+
+/*!
+    @method webView:identifierForInitialRequest:fromDataSource:
+    @param webView The WebView sending the message.
+    @param request The request about to be sent.
+    @param dataSource The datasource that initiated the load.
+    @discussion An implementor of WebResourceLoadDelegate should provide an identifier
+    that can be used to track the load of a single resource.  This identifier will be
+    passed as the first argument for all of the other WebResourceLoadDelegate methods.  The
+    identifier is useful to track changes to a resources request, which will be
+    provided by one or more calls to resource:willSendRequest:redirectResponse:fromDataSource:.
+    @result An identifier that will be passed back to the implementor for each callback.
+    The identifier will be retained.
+*/
+- (id)webView:(WebView *)sender identifierForInitialRequest:(NSURLRequest *)request fromDataSource:(WebDataSource *)dataSource;
+
+/*!
+    @method resource:willSendRequest:redirectResponse:fromDataSource:
+    @discussion This message is sent before a load is initiated.  The request may be modified
+    as necessary by the receiver.
+    @param webView The WebView sending the message.
+    @param identifier An identifier that can be used to track the progress of a resource load across
+    multiple call backs.
+    @param request The request about to be sent.
+    @param redirectResponse If the request is being made in response to a redirect we received,
+    the response that conveyed that redirect.
+    @param dataSource The dataSource that initiated the load.
+    @result Returns the request, which may be mutated by the implementor, although typically
+    will be request.
+*/
+- (NSURLRequest *)webView:(WebView *)sender resource:(id)identifier willSendRequest:(NSURLRequest *)request redirectResponse:(NSURLResponse *)redirectResponse fromDataSource:(WebDataSource *)dataSource;
+
+/*!
+    @method webView:resource:didReceiveAuthenticationChallenge:fromDataSource:
+    @abstract Start authentication for the resource, providing a challenge
+    @discussion Call useCredential::, continueWithoutCredential or
+    cancel on the challenge when done.
+    @param challenge The NSURLAuthenticationChallenge to start authentication for
+    @discussion If you do not implement this delegate method, WebKit will handle authentication
+    automatically by prompting with a sheet on the window that the WebView is associated with.
+*/
+- (void)webView:(WebView *)sender resource:(id)identifier didReceiveAuthenticationChallenge:(NSURLAuthenticationChallenge *)challenge fromDataSource:(WebDataSource *)dataSource;
+
+/*!
+    @method webView:resource:didCancelAuthenticationChallenge:fromDataSource:
+    @abstract Cancel authentication for a given request
+    @param challenge The NSURLAuthenticationChallenge for which to cancel authentication
+*/
+- (void)webView:(WebView *)sender resource:(id)identifier didCancelAuthenticationChallenge:(NSURLAuthenticationChallenge *)challenge fromDataSource:(WebDataSource *)dataSource;
+
+/*!
+    @method webView:resource:didReceiveResponse:fromDataSource:
+    @abstract This message is sent after a response has been received for this load.
+    @param webView The WebView sending the message.
+    @param identifier An identifier that can be used to track the progress of a resource load across
+    multiple call backs.
+    @param response The response for the request.
+    @param dataSource The dataSource that initiated the load.
+    @discussion In some rare cases, multiple responses may be received for a single load.
+    This occurs with multipart/x-mixed-replace, or "server push". In this case, the client
+    should assume that each new response resets progress so far for the resource back to 0,
+    and should check the new response for the expected content length.
+*/
+- (void)webView:(WebView *)sender resource:(id)identifier didReceiveResponse:(NSURLResponse *)response fromDataSource:(WebDataSource *)dataSource;
+
+/*!
+    @method webView:resource:didReceiveContentLength:fromDataSource:
+    @discussion Multiple of these messages may be sent as data arrives.
+    @param webView The WebView sending the message.
+    @param identifier An identifier that can be used to track the progress of a resource load across
+    multiple call backs.
+    @param length The amount of new data received.  This is not the total amount, just the new amount received.
+    @param dataSource The dataSource that initiated the load.
+*/
+- (void)webView:(WebView *)sender resource:(id)identifier didReceiveContentLength:(WebNSInteger)length fromDataSource:(WebDataSource *)dataSource;
+
+/*!
+    @method webView:resource:didFinishLoadingFromDataSource:
+    @discussion This message is sent after a load has successfully completed.
+    @param webView The WebView sending the message.
+    @param identifier An identifier that can be used to track the progress of a resource load across
+    multiple call backs.
+    @param dataSource The dataSource that initiated the load.
+*/
+- (void)webView:(WebView *)sender resource:(id)identifier didFinishLoadingFromDataSource:(WebDataSource *)dataSource;
+
+/*!
+    @method webView:resource:didFailLoadingWithError:fromDataSource:
+    @discussion This message is sent after a load has failed to load due to an error.
+    @param webView The WebView sending the message.
+    @param identifier An identifier that can be used to track the progress of a resource load across
+    multiple call backs.
+    @param error The error associated with this load.
+    @param dataSource The dataSource that initiated the load.
+*/
+- (void)webView:(WebView *)sender resource:(id)identifier didFailLoadingWithError:(NSError *)error fromDataSource:(WebDataSource *)dataSource;
+
+/*!
+    @method webView:plugInFailedWithError:dataSource:
+    @discussion Called when a plug-in is not found, fails to load or is not available for some reason.
+    @param webView The WebView sending the message.
+    @param error The plug-in error. In the userInfo dictionary of the error, the object for the
+    NSErrorFailingURLKey key is a URL string of the SRC attribute, the object for the WebKitErrorPlugInNameKey
+    key is a string of the plug-in's name, the object for the WebKitErrorPlugInPageURLStringKey key is a URL string
+    of the PLUGINSPAGE attribute and the object for the WebKitErrorMIMETypeKey key is a string of the TYPE attribute.
+    Some, none or all of the mentioned attributes can be present in the userInfo. The error returns nil for userInfo
+    when none are present.
+    @param dataSource The dataSource that contains the plug-in.
+*/
+- (void)webView:(WebView *)sender plugInFailedWithError:(NSError *)error dataSource:(WebDataSource *)dataSource;
+
+@end
+
+#undef WebNSInteger