diff -r 000000000000 -r 29b1cd4cb562 bluetoothapitest/bluetoothsvs/T_BTUserAPI/scripts/BT-USER-BTPhysicalLinkAdapter-PublicApi.script --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/bluetoothapitest/bluetoothsvs/T_BTUserAPI/scripts/BT-USER-BTPhysicalLinkAdapter-PublicApi.script Fri Jan 15 08:13:17 2010 +0200 @@ -0,0 +1,336 @@ +// +// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies). +// All rights reserved. +// This component and the accompanying materials are made available +// under the terms of "Eclipse Public License v1.0" +// which accompanies this distribution, and is available +// at the URL "http://www.eclipse.org/legal/epl-v10.html". +// +// Initial Contributors: +// Nokia Corporation - initial contribution. +// +// Contributors: +// +// Description: +// +/////////////////////////////////////////////////////////////////////////////// +//! @file +//! @SYMTestSuiteName T_BTUserAPI +//! @SYMScriptTestEnvironment This test script requires a basic ROM with bluetooth dongle. +//! @SYMScriptDescription Tests all public elements of the RBTPhysicalLinkAdapter classe +//! as a means of confidence that the API works as expected. +//! The purpose is to provide a regression test suite of PublishedAll APIs for +//! BT USER related classes. +//! Negative testing is performed to confirm that correct errors are returned +//! when incorrect parameters are given. The tests are fully automated. +//! @SYMAuthor Zoe Chen +//! @SYMCreationDate 03/04/2007 +/////////////////////////////////////////////////////////////////////////////// + +RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\ +RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\ + +LOAD_SUITE T_BTUserAPI +DELAY 500 + + +// **************************************************************************** +// RBTPhysicalLinkAdapter +// **************************************************************************** + +START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0001 +//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0001 +//! @SYMAPI RBTPhysicalLinkAdapter +//! @SYMTestCaseDesc Create a RBTPhysicalLinkAdapter object +//! Uses API elements: RBTPhysicalLinkAdapter() +//! @SYMTestActions Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults RBTPhysicalLinkAdapter object was created successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini + CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1 + COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter + END_TEST_BLOCK + +END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0001 + + +START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0002 +//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0002 +//! @SYMAPI RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ +//! @SYMTestCaseDesc Open a physical link adapter on an existing physical link +//! Uses API elements: NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks +//! RBTPhysicalLinkAdapter(), Open()2 and Close() from RBTPhysicalLinkAdapter +//! RSocketServ(), Connect() and Close() from RSocketServ +//! @SYMTestActions 1. Create and start a session on the socket server +//! 2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful +//! 3. Bring in a new member to the piconet with a device address(11111111) using +//! CreateConnection() function. Return KErrNone if successful +//! 4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function +//! 5. Open a physical link adapter on an existing physical link with a device address(11111111) +//! using Open()2 function. Return KErrNone if successful +//! 6. Close the physical link adapter using Close() function +//! 7. Delete the socket using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults KErrNone returned +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini + CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1 + CREATE_OBJECT CBluetoothPhysicalLinks CBluetoothPhysicalLinks1 + CREATE_OBJECT RSocketServ RSocketServ1 + COMMAND RSocketServ1 RSocketServ + COMMAND RSocketServ1 Connect + COMMAND CBluetoothPhysicalLinks1 NewL BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command5NewL + COMMAND CBluetoothPhysicalLinks1 CreateConnection BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command6CreateConnection + COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter + COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command9Open + COMMAND RBTPhysicalLinkAdapter1 Close + COMMAND CBluetoothPhysicalLinks1 ~ + COMMAND RSocketServ1 Close + END_TEST_BLOCK + +END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0002 + + +START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0003 +//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0003 +//! @SYMAPI RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ +//! @SYMTestCaseDesc Check whether the physical link adapter is open +//! Uses API elements: NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks +//! RBTPhysicalLinkAdapter(), Open()2 and IsOpen() from RBTPhysicalLinkAdapter +//! RSocketServ(), Connect() and Close() from RSocketServ +//! @SYMTestActions 1. Create and start a session on the socket server +//! 2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful +//! 3. Bring in a new member to the piconet with a device address(11111111) using +//! CreateConnection() function. Return KErrNone if successful +//! 4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function +//! 5. Check whether the physical link adapter is open using IsOpen() function. +//! 6. Verify that the result (False) is as expected (False) +//! 7. Open a physical link adapter on an existing physical link with a device address(11111111) +//! using Open()2 function. Return KErrNone if successful +//! 8. Check whether the physical link adapter is open using IsOpen() function. +//! 9. Verify that the result (True) is as expected (True) +//! 10. Delete the socket using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults True if the physical link adapter is open, otherwise false +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini + CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1 + CREATE_OBJECT CBluetoothPhysicalLinks CBluetoothPhysicalLinks1 + CREATE_OBJECT RSocketServ RSocketServ1 + COMMAND RSocketServ1 RSocketServ + COMMAND RSocketServ1 Connect + COMMAND CBluetoothPhysicalLinks1 NewL BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command5NewL + COMMAND CBluetoothPhysicalLinks1 CreateConnection BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command6CreateConnection + COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter + COMMAND RBTPhysicalLinkAdapter1 IsOpen BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command9IsOpen + COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command10Open + COMMAND RBTPhysicalLinkAdapter1 IsOpen BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command11IsOpen + COMMAND CBluetoothPhysicalLinks1 ~ + COMMAND RSocketServ1 Close + END_TEST_BLOCK + +END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0003 + + +START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0004 +//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0004 +//! @SYMAPI RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ +//! @SYMTestCaseDesc Update the set of baseband packet types that are allowed locally +//! Uses API elements: NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks +//! RBTPhysicalLinkAdapter(), Open()2, RequestChangeSupportedPacketTypes() and Close() from RBTPhysicalLinkAdapter +//! RSocketServ(), Connect() and Close() from RSocketServ +//! @SYMTestActions 1. Create and start a session on the socket server +//! 2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful +//! 3. Bring in a new member to the piconet with a device address(11111111) using +//! CreateConnection() function. Return KErrNone if successful +//! 4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function +//! 5. Open a physical link adapter on an existing physical link with a device address(11111111) +//! using Open()2 function. Return KErrNone if successful +//! 6. Update the set of baseband packet types that are allowed locally using +//! RequestChangeSupportedPacketTypes() function. Return KErrNone if successful +//! 7. Close the physical link adapter using Close() function +//! 8. Delete the socket using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults KErrNone returned +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini + CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1 + CREATE_OBJECT CBluetoothPhysicalLinks CBluetoothPhysicalLinks1 + CREATE_OBJECT RSocketServ RSocketServ1 + COMMAND RSocketServ1 RSocketServ + COMMAND RSocketServ1 Connect + COMMAND CBluetoothPhysicalLinks1 NewL BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command5NewL + COMMAND CBluetoothPhysicalLinks1 CreateConnection BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command6CreateConnection + COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter + COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command9Open + COMMAND RBTPhysicalLinkAdapter1 RequestChangeSupportedPacketTypes BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command10RequestChangeSupportedPacketTypes + COMMAND RBTPhysicalLinkAdapter1 Close + COMMAND CBluetoothPhysicalLinks1 ~ + COMMAND RSocketServ1 Close + END_TEST_BLOCK + +END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0004 + + +// **************************************************************************** +// Negative test cases +// **************************************************************************** + +START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0005 +//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0005 +//! @SYMAPI RBTPhysicalLinkAdapter and RSocketServ +//! @SYMTestCaseDesc Open a physical link adapter on a socket which is not open and connected +//! Uses API elements: RBTPhysicalLinkAdapter(), Open()1 and Close() from RBTPhysicalLinkAdapter +//! RSocketServ(), Connect() and Close() from RSocketServ +//! @SYMTestActions 1. Create and start a session on the socket server +//! 2. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function +//! 3. Open a physical link adapter on an existing physical with a RSocket object link +//! using Open()1 function. Return KErrNone if successful +//! 4. Close the physical link adapter using Close() function +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults KErrNotReady(-18) returned at step 2 +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini + CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1 + CREATE_OBJECT RSocket RSocket1 + CREATE_OBJECT RSocketServ RSocketServ1 + COMMAND RSocketServ1 RSocketServ + COMMAND RSocketServ1 Connect + COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter + COMMAND !Error=-18 RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0005-0001command6Open + COMMAND RBTPhysicalLinkAdapter1 Close + COMMAND RSocketServ1 Close + END_TEST_BLOCK + +END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0005 + + +START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0007 +//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0007 +//! @SYMAPI RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ +//! @SYMTestCaseDesc Block a role switch +//! Uses API elements: NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks +//! RBTPhysicalLinkAdapter(), Open()2, AllowRoleSwitch(), PreventRoleSwitch() and Close() from RBTPhysicalLinkAdapter +//! RSocketServ(), Connect() and Close() from RSocketServ +//! @SYMTestActions 1. Create and start a session on the socket server +//! 2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful +//! 3. Bring in a new member to the piconet with a device address(22222222) using +//! CreateConnection() function. Return KErrNone if successful +//! 4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function +//! 5. Open a physical link adapter on an existing physical link with a device address(22222222) +//! using Open()2 function. Return KErrNone if successful +//! 6. Ensure this object does not block a role switch using AllowRoleSwitch() function. +//! Return KErrNone if successful +//! 7. Block a role switch using PreventRoleSwitch() function. Return KErrNone if successful +//! 8. Close the physical link adapter using Close() function +//! 9. Delete the socket using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults KErrDisconnected(-36) returned at step 6 and 7 +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini + CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1 + CREATE_OBJECT CBluetoothPhysicalLinks CBluetoothPhysicalLinks1 + CREATE_OBJECT RSocketServ RSocketServ1 + COMMAND RSocketServ1 RSocketServ + COMMAND RSocketServ1 Connect + COMMAND CBluetoothPhysicalLinks1 NewL BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command5NewL + COMMAND CBluetoothPhysicalLinks1 CreateConnection BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command6CreateConnection + COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter + COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command9Open + COMMAND !Error=-36 RBTPhysicalLinkAdapter1 AllowRoleSwitch + COMMAND !Error=-36 RBTPhysicalLinkAdapter1 PreventRoleSwitch + COMMAND RBTPhysicalLinkAdapter1 Close + COMMAND CBluetoothPhysicalLinks1 ~ + COMMAND RSocketServ1 Close + END_TEST_BLOCK + +END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0007 + + +START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0008 +//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0008 +//! @SYMAPI RBTPhysicalLinkAdapter +//! @SYMTestCaseDesc Check whether the physical link adapter is open +//! Uses API elements: RBTPhysicalLinkAdapter() and IsOpen() +//! @SYMTestActions 1. Create an empty RBTPhysicalLinkAdapter object +//! 2. Verify that if the physical link adapter is open +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Returned False +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini + CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1 + COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter + COMMAND RBTPhysicalLinkAdapter1 IsOpen BT-USER-BTPhysicalLinkAdapter-PublicApi-0008-0001command2IsOpen + END_TEST_BLOCK + +END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0008 + + +START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0009 +//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0009 +//! @SYMAPI RBTPhysicalLinkAdapter and RSocketServ +//! @SYMTestCaseDesc Open a physical link adapter on a socket which is not open and connected +//! Uses API elements: RBTPhysicalLinkAdapter(), Open()2 and Close() from RBTPhysicalLinkAdapter +//! RSocketServ(), Connect() and Close() from RSocketServ +//! @SYMTestActions 1. Create and start a session on the socket server +//! 2. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function +//! 3. Open a physical link adapter without an existing physical links using Open()2 function. +//! Return KErrNone if successful +//! 4. Close the physical link adapter using Close() function +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults KErrNone returned +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini + CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1 + CREATE_OBJECT RSocketServ RSocketServ1 + COMMAND RSocketServ1 RSocketServ + COMMAND RSocketServ1 Connect + COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter + COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0009-0001command6Open + COMMAND RBTPhysicalLinkAdapter1 Close + COMMAND RSocketServ1 Close + END_TEST_BLOCK + +END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0009 + + +//!START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0006 +//! @SYMTestCaseID BT-USER-BTPhysicalLinkAdapter-PublicApi-0006 +//! @SYMAPI RBTPhysicalLinkAdapter and RSocketServ +//! @SYMTestCaseDesc Open a physical link adapter on a socket which is not open and connected +//! Uses API elements: RBTPhysicalLinkAdapter() and Open()2 +//! @SYMTestActions 1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function +//! 2. Open a physical link adapter without an existing physical links +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Panic at step 2 +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTUserAPI \bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini +//! CREATE_OBJECT RBTPhysicalLinkAdapter RBTPhysicalLinkAdapter1 +//! CREATE_OBJECT RSocketServ RSocketServ1 +//! COMMAND RBTPhysicalLinkAdapter1 RBTPhysicalLinkAdapter +//! COMMAND RBTPhysicalLinkAdapter1 Open BT-USER-BTPhysicalLinkAdapter-PublicApi-0006-0001command2Open +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0006 + + +DELAY 2000