// Copyright (c) 2006-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// This file implements the CIPv6Binder class, which handles the transmission

// of IPv6 data to and from the TCP/IP stack.

// 

//

/**

 @file

*/

#include <etelpckt.h>

#include <in_iface.h>

#include "RawIP2Flow.h"

#include "IPv6Binder.h"

#include <comms-infras/linkprovision.h>

#ifdef WCDMA_STUB

#include <networking/umtsnifcontrolif.h>

#endif

#define LOG_IP_ADDRESS(desc,addr) _LOG_L2C5(_L8("    " desc " = %d:%d:%d:%d from context"), \

			addr.u.iAddr32[3], addr.u.iAddr32[2], addr.u.iAddr32[1], addr.u.iAddr32[0]);

CIPv6Binder::CIPv6Binder(CRawIP2Flow& aFlow, CBttLogger* aTheLogger)

/**

 * Constructor

 */ 

	: CBinderBase(aFlow,aTheLogger),

	  iTheLogger(aTheLogger),

	  iSpeedMetric(KDefaultSpeedMetric)

	{

	}

CIPv6Binder::~CIPv6Binder()

/**

 *	Destructor

 */

	{

	}

ESock::MLowerDataSender* CIPv6Binder::Bind(ESock::MUpperDataReceiver* aUpperReceiver, ESock::MUpperControl* aUpperControl)

/**

 * Binds TCP/IP protocol to Flow

 *

 * @param aUpperReceiver A pointer to Upper layer Receive class

 * @param aUpperControl A pointer to Upper layer control class

 */

	{

	CBinderBase::Bind(aUpperReceiver, aUpperControl); // Call the superclass's method.

	return this;

	}

TInt CIPv6Binder::Control(TUint aLevel, TUint aName, TDes8& /*aOption*/)

/**

 * The main function called by the TCP/IP protocol to control the interface.

 * Can perform a variety of general IP tasks (such as getting IP config)

 * and "3G" specific tasks (such as deleting the context).

 *

 * @param aLevel The level of the interface to control - always KSOLInterface

 * @param aName The command to perform

 * @param aOption Data to be input/output as a result of the command

 * @return Standard error codes

 */

	{

	_LOG_L1C3(_L8("CIPv6Binder::Control [aLevel=%d, aName=%d]"),

		aLevel, aName);

	if (aLevel == KSOLInterface)

		{

		switch (aName)

			{

		case KSoIfHardwareAddr:

			// unsupported because we don't have a h/w address

			break;

		// 3G-specific configuration commands are below this point.

#ifdef WCDMA_STUB

		case KRegisterEventHandler:

			// Raw IP NIF Events are not supported

		case KContextSetEvents:

			// Raw IP NIF Events are not supported

			break;

		case KContextCreate:

			// We don't support creating new secondary contexts.

			break;

		case KContextDelete:

			// Deletes the primary PDP context. This will shut down the Nif.

			return DeleteContext(aOption);

		case KContextActivate:

			// If the IPv6 interface is up, then the context will already have

			// been activated. So this command should fail with 

			// KErrAlreadyExists

			{

			TUint8* ptr = CONST_CAST(TUint8*, aOption.Ptr()); 

			TContextParameters* contextParams =

				REINTERPRET_CAST(TContextParameters*, ptr);

			if (contextParams->iContextInfo.iContextId != 

				STATIC_CAST(TInt8, GetFlow().GetBcaController()->Nsapi()))

				{

				contextParams->iReasonCode = KErrNotFound;

				}

			else

				{

				contextParams->iContextInfo.iStatus =

					GetFlow().GetContextStatus();

				contextParams->iReasonCode = KErrAlreadyExists;

				}

			return KErrNone;

			}

		case KNifSetDefaultQoS:

		case KContextQoSSet:

			// Setting the QoS is meaningless over GPRS, so we just return that

			// we don't support these operations.

			break;

		case KContextTFTModify:

			// As we only have one primary context, we don't support anything

			// to do with traffic flow templates, which are used by secondary

			// contexts.

			break;

		case KContextModifyActive:

			// This command is only valid aftermodifying TFT/QoS parameters. 

			// As we don't support any of these operations,

			// this command is never valid.

			break;

#endif

		default:

			break;

			}

		}

	return KErrNotSupported;

	}

TInt CIPv6Binder::GetConfig(TBinderConfig& aConfig)

	{

    TBinderConfig6* config = TBinderConfig::Cast<TBinderConfig6>(aConfig);

   	if(config == NULL)

   		{

   		return KErrNotSupported;

   		}

	config->iFamily = KAfInet6;		/* KAfInet6 - selects TBinderConfig6 */

	config->iInfo.iFeatures = KIfCanBroadcast | KIfCanMulticast;		/* Feature flags */

	config->iInfo.iMtu = KDefaultMtu;				/* Maximum transmission unit. */

	config->iInfo.iRMtu = KDefaultMtu;				/* Maximum transmission unit for receiving. */

	config->iInfo.iSpeedMetric = iSpeedMetric;		/* approximation of the interface speed in Kbps. */

	TEui64Addr& localId = TEui64Addr::Cast(config->iLocalId);

	localId = iSettings.iLocalIfId;

	config->iNameSer1.SetAddress(iSettings.iPrimaryDns);		/* IP primary name server (if any). */

	config->iNameSer2.SetAddress(iSettings.iSecondaryDns);	/* IP secondary name server (if any). */

	return KErrNone;

	}

#ifdef WCDMA_STUB

TInt CIPv6Binder::DeleteContext(TDes8& aContextParameters)

/**

 * Deletes a context. As the NIF is responsible for one primary context,

 * this is equivalent to closing down the NIF.

 *

 * @param aContextParameters Parameters of the context to delete

 * @return KErrArgument if an incorrect structure is passed, otherwise KErrNone

 */

	{

	_LOG_L1C1(_L8("CIPv6Binder::DeleteContext"));

	if (aContextParameters.Length() != sizeof(TContextParameters))

		{

		return KErrArgument;

		}

	TUint8* ptr = CONST_CAST(TUint8*, aContextParameters.Ptr());

	TContextParameters* params = REINTERPRET_CAST(TContextParameters*, ptr);

	if (params->iContextInfo.iContextId != 

		STATIC_CAST(TInt8, GetFlow().GetBcaController()->Nsapi()))

		{

		params->iReasonCode = KErrBadName;

		}

	else

		{

		params->iReasonCode = KErrNone; 

		GetFlow().Stop(KErrNone, MNifIfNotify::EDisconnect);

		}

	return KErrNone;

	}

#endif

/**

 * Called when the context has been activated to set our IP address and get

 * any other required settings from CommDB.

 *

 * @param aConfig The new context config

 */

 void CIPv6Binder::UpdateContextConfigL(const TPacketDataConfigBase& aConfig)

	{

	_LOG_L1C1(_L8("CIPv6Binder::UpdateContextConfig"));

	// Get our IP address from the GPRS context config.

	TInetAddr address;

	TBuf<RPacketContext::KMaxPDPAddressLength> tempAddr;

	const RPacketContext::TProtocolConfigOptionV2* pco;

	TInt rel = const_cast<TPacketDataConfigBase&>(aConfig).ExtensionId();

	if (rel == TPacketDataConfigBase::KConfigGPRS) 

	    {

	    tempAddr.Copy(static_cast<const RPacketContext::TContextConfigGPRS&>(aConfig).iPdpAddress);

	    pco = &static_cast<const RPacketContext::TContextConfigGPRS&>(aConfig).iProtocolConfigOption;

	    }

    else

        {

        ASSERT(rel == TPacketDataConfigBase::KConfigRel99Rel4 || rel == TPacketDataConfigBase::KConfigRel5);

	    tempAddr.Copy(static_cast<const RPacketContext::TContextConfigR99_R4&>(aConfig).iPdpAddress);

	    pco = &static_cast<const RPacketContext::TContextConfigR99_R4&>(aConfig).iProtocolConfigOption;

        }

	TInt ret = address.Input(tempAddr);

	// We've got our IP address! Let's save it.

	if (ret == KErrNone)

		{

		iSettings.iLocalAddr = address.Ip6Address();

		LOG_IP_ADDRESS("Got local IP address", iSettings.iLocalAddr);

		}

	else

		{

		_LOG_L2C2(_L8("Couldn't get IP address from GPRS config (err: %d)"),

			ret);

		// Don't leave on this error: we may still be OK if we read some

		// settings from CommDB.

		}

	// @todo - is this correct. We can only get the DNS addresses

	// from the TSY using the iProtocolConfigOption data. Yet a client could

	// access those DNS config details without knowing about the state of the

	// iSettings.iGetDnsFromServer flag.

	if ((iSettings.iGetDnsFromServer) ||

		((iSettings.iPrimaryDns.IsUnspecified()) &&

		 (iSettings.iSecondaryDns.IsUnspecified())) ) 

		{

		TBuf<RPacketContext::KMaxPDPAddressLength> tempAddr;

		tempAddr.Copy(pco->iDnsAddresses.iPrimaryDns);

		ret = address.Input(tempAddr);

		if (ret == KErrNone)

			{

			iSettings.iPrimaryDns = address.Ip6Address();

			LOG_IP_ADDRESS("Got primary DNS", iSettings.iPrimaryDns);

			}

		else

			{

			_LOG_L2C2(_L8("Couldn't get primary DNS address from GPRS config (err: %d)"),

				ret);

			// Don't leave on this error: we may still be OK if we read some

			// settings from CommDB.

			}

		tempAddr.Copy(pco->iDnsAddresses.iSecondaryDns);

		ret = address.Input(tempAddr);

		if (ret == KErrNone)

			{

			iSettings.iSecondaryDns = address.Ip6Address();

			LOG_IP_ADDRESS("Got secondary DNS", iSettings.iPrimaryDns);

			}

		else

			{

			_LOG_L2C2(_L8("Couldn't get secondary DNS address from GPRS config (err: %d)"),

				ret);

			// Don't leave on this error: we may still be OK if we read some

			// settings from CommDB.

			}

		}

	else

		{

		LOG_IP_ADDRESS("Using CommDB DNS address - Primary ", iSettings.iPrimaryDns);

		LOG_IP_ADDRESS("                         - Secondary ", iSettings.iSecondaryDns);

		}

	}

void CIPv6Binder::UpdateConnectionSpeed(TUint aConnectionSpeed)

/**

 * Sets the speed metric to return to TCP/IP, based on what the TSY tells us.

 *

 * @param aConnectionSpeed Our connection speed

 */

	{

	_LOG_L1C1(_L8("CIPv6Binder::UpdateConnectionSpeed"));

	iSpeedMetric = aConnectionSpeed;

	}

ESock::MLowerDataSender::TSendResult CIPv6Binder::Send(RMBufChain& aPdu)

	{

	return Send(static_cast<RCommsBufChain&>(aPdu));

	}

ESock::MLowerDataSender::TSendResult CIPv6Binder::Send(RCommsBufChain& aPdu)

/**

 * Called by the protocol to send an outgoing IP packet to the network.

 *

 * @param aPdu The outgoing packet

 * @return Standard error codes

 */

	{

	_LOG_L1C1(_L8("CIPv6Binder::Send"));

#ifdef __BTT_LOGGING__

		LogPacket(static_cast<RMBufChain&>(aPdu));

#endif

		// Return <0: an error occurred

		// Return  0: no error, but don't send any more packets

#ifdef RAWIP_HEADER_APPENDED_TO_PACKETS

		iIPTagHeader->AddHeader(aPdu);

#endif // RAWIP_HEADER_APPENDED_TO_PACKETS

		return ESock::MLowerDataSender::TSendResult(iLowerDataSender->Send(aPdu));

	}

TInt CIPv6Binder::Notification(TAgentToNifEventType /*aEvent*/, 

	void* /*aInfo*/)

/**

 * The Nif will ignore any notification sent

 *

 * @param aEvent Not used

 * @param aInfo Not used 

 */

	{

	_LOG_L1C1(_L8("CIPv6Binder::Notification"));

	return KErrNone;

	}

void CIPv6Binder::StartSending()

/**

 * Indicates to the protocol layer that the NIF is ready to send packets.

 *

 * @param aProtocol A pointer to a protocol

 */

	{

	_LOG_L1C1(_L8("CIPv6Binder::StartSending()"));

	CBinderBase::StartSending();

	}

TBool CIPv6Binder::WantsProtocol(TUint16 aProtocolCode)

/**

 * Indicates the type of protocol implemented by this class.

 *

 * @param aProtocolCode The protocol type

 */

	{

	_LOG_L1C2(_L8("CIPv6Binder::WantsProtocol [aProtocolCode=%X]"),

		aProtocolCode);

#ifdef RAWIP_HEADER_APPENDED_TO_PACKETS

	return ((aProtocolCode & 0x00FF) == KIp6FrameType);

#else

	(void) aProtocolCode;

	return ETrue;

#endif // RAWIP_HEADER_APPENDED_TO_PACKETS

	}

void CIPv6Binder::Process(RMBufChain&  aPdu)

	{	

	Process(static_cast<RCommsBufChain&>(aPdu));

	}

void CIPv6Binder::Process(RCommsBufChain& aPdu)

/**

 * Called when an incoming IP packet has arrived. Send packets up to the

 * TCP/IP stack.

 *

 * @param aPdu The incoming packet

 */

	{

	_LOG_L1C1(_L8("CIPv6Binder::Process"));

#ifdef __BTT_LOGGING__

	LogPacket(static_cast<RMBufChain&>(aPdu));

#endif

#ifdef RAWIP_HEADER_APPENDED_TO_PACKETS

	TUint16 protocolCode = iIPTagHeader->RemoveHeader(aPdu);

#else

	TUint16 protocolCode = 0;

#endif // RAWIP_HEADER_APPENDED_TO_PACKETS

	// Pass incoming packets up to the protocol, unless it hasn't

	// been bound yet.

	if (iUpperReceiver && WantsProtocol(protocolCode))

		{		

		_LOG_L1C1(_L8("CIPv6Binder: Packet Sent to TCP/IP Protocol!!!"));

		iUpperReceiver->Process(static_cast<RMBufChain&>(aPdu));

		}

	else 

		{

		_LOG_L2C1(_L8("WARNING: dumping incoming packet, no protocol bound"));

		aPdu.Free();

		}

	}

//

// MLowerControl methods

//

TInt CIPv6Binder::GetName(TDes& aName)

/**

*/

	{

	WriteIfName(aName);

	return KErrNone;

	}

//

// CBinderBase methods

//

void CIPv6Binder::SetProvision(const CIPConfig& aProvision)

/**

Set provisioning information for IPv6 binder.

Called from RawIP Flow.

@param aProvision Provisioning structure from Control side.

*/

	{

	iSettings.iPrimaryDns = aProvision.GetIp6NameServer1();

	iSettings.iSecondaryDns	= aProvision.GetIp6NameServer2();

	iSettings.iGetDnsFromServer = aProvision.GetIp6DNSAddrFromServer();

	// Read whether to get IPv4 address from the server

	// This is only needed for the integration tests. If it's true then 

	// the IPv4 address will be used to build up the IPv6 address. 

	iSettings.iGetIpFromServer = aProvision.GetIpAddrFromServer();

	if (iSettings.iGetIpFromServer == EFalse)

		{

		// Sets the IPv6 Link-local address from IpAddr.

		// LocalId is derived from IpAddr and it's further used to set the Link-local

		// address elsewhere by adding a prefix (FE80::) in front.

		// For IpAddr: 192.168.1.1, link-local address will be FE80::C0A8:101.		

		TUint32 ipAddr = aProvision.GetIpAddress();

		const TUint8 constantId[8] = { 0, 0, 0, 0, 

									ipAddr >> 24, (ipAddr >> 16) & 0xFF, 

									(ipAddr >> 8) & 0xFF, ipAddr & 0xFF }; 

		iSettings.iLocalIfId.SetAddr(constantId, sizeof (constantId));

		}

	else

		{	

		//

		// Use the 64 bit id of MARM machines as our interface id

		//

		TMachineInfoV1Buf machineInfo;	

		UserHal::MachineInfo(machineInfo);

		iSettings.iLocalIfId.SetAddr(machineInfo().iMachineUniqueId);

		iSettings.iLocalIfId.SetUniversalBit(0);

		//

		// In WINS environment the id is zero which is no-no

		//

		if (iSettings.iLocalIfId.IsZero())

			{

				iSettings.iLocalIfId.SetAddrRandomNZ();

			}		

		}

	}

#ifdef __BTT_LOGGING__

void CIPv6Binder::LogPacket(const RMBufChain& aPacket)

/**

* Logs packet information into log file.

*

* @param aPacket The packet 

*/

	{

	_LOG_L1C1(_L8("CIPv6Binder::LogPacket"));

	TInt mBufLength = aPacket.Length() - aPacket.First()->Length();

	_LOG_L3C2(_L8("Analysis of %d byte packet:"), mBufLength);

	//Note: All the constants used on this method are a pragmatic guess of the

	//IP header fields. The only porpose of this method is logging.

	if (mBufLength < 40)

		{

		_LOG_L3C2(_L8(" -doesn't appear to be a valid IPv6 packet (length=%d)")

			, mBufLength);

		return;

		}