// Copyright (c) 2004-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// Secondary PDP-context UMTS Driver integration tests using PPP as the NIF.

//

//! @file TE_SpudNetworkSide_ppp_9x.script

RUN_UTILS  MkDir c:\simtsy\

RUN_UTILS  MkDir c:\private\

RUN_UTILS  MkDir c:\private\101F7989\

RUN_UTILS  MkDir c:\private\101F7989\esock\

RUN_UTILS  MakeReadWrite c:\simtsy\config.txt

RUN_UTILS  MakeReadWrite c:\config.txt

RUN_UTILS  MakeReadWrite c:\loopback.ini

RUN_UTILS  DeleteFile c:\simtsy\config.txt

RUN_UTILS  DeleteFile c:\config.txt

RUN_UTILS  DeleteFile c:\loopback.ini

LOAD_SUITE TE_SpudNetworkSide

// TestSection suffix numbers correspond to SIM TSY's test section numbers. i.e. PrimaryActivationFails201 uses SIM TSYs test201 

//

// Configure CommDB for the tests using PPP as lower NIF

//

run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script

ced -i z:\TestData\Configs\TE_SpudNetworkSide_ppp.xml

run_script z:\TestData\scripts\te_esock_test_loadesock.script

RUN_UTILS  CopyFile z:\TestData\Configs\TE_SpudNetworkSide_ppp_config.txt c:\simtsy\config.txt

RUN_UTILS  CopyFile z:\TestData\Configs\TE_SpudNetworkSide_ppp_config.txt c:\config.txt

RUN_UTILS  CopyFile z:\TestData\Configs\TE_SpudNetworkSideLoopbackCSY.ini c:\loopback.ini

START_TESTCASE          NET-Spud-NetworkSide-1201

//! @SYMTestCaseID      NET-Spud-NetworkSide-1201

//! @SYMTestCaseDesc Stop the interface when SPUD is starting lower NIF for the primary context.

//! @SYMFssID NETWORKING/Spud/Control Plane/Primary PDP Context Creation

//! @SYMTestActions SPUD starts the lower NIF, which "takes a long time to start", i.e. no LinkLayerUp / Down. Stop SPUD using RConnection::Stop(EStopNormal)

//! @SYMTestExpectedResults KLinkLayerClosed / KErrCancel progress.

//! @SYMTestPriority Critical

//! @SYMTestStatus Implemented

//! @SYMTestType IT 

// Note: this test case uses CSpudSecondaryStartingStop by design, because the sequence of events is identical, the only difference is timing.

RUN_TEST_STEP 120 TE_SpudNetworkSide CSpudSecondaryStartingStop z:\testdata\configs\te_spudNetworkSide_nifman.ini NormalStopPrimaryStartingLowerNif1

DELAY 6000

RUN_TEST_STEP 60 TE_SpudNetworkSide CESockCheck z:\testdata\configs\te_spudNetworkSide.ini ESockCheck

END_TESTCASE            NET-Spud-NetworkSide-1201

// Unload and reload ESock TWICE. Once is not enough to correct the crash of the previous test

// case. Afeter TESTCASE 1 is fixed, this can (and should) be safely removed.

run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script

run_script z:\TestData\scripts\te_esock_test_loadesock.script

run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script

run_script z:\TestData\scripts\te_esock_test_loadesock.script

RUN_UTILS  MakeReadWrite c:\simtsy\config.txt

RUN_UTILS  MakeReadWrite c:\config.txt

RUN_UTILS  DeleteFile c:\simtsy\config.txt

RUN_UTILS  DeleteFile c:\config.txt

RUN_UTILS  CopyFile z:\TestData\Configs\te_spudnetworkside_ppp_config2.txt c:\simtsy\config.txt

RUN_UTILS  CopyFile z:\TestData\Configs\te_spudnetworkside_ppp_config2.txt c:\config.txt

START_TESTCASE          NET-Spud-NetworkSide-1202

//! @SYMTestCaseID      NET-Spud-NetworkSide-1202

//! @SYMTestCaseDesc Error on Start of a lower NIF for primary context.  

//! @SYMFssID NETWORKING/Spud/Control Plane/Primary PDP Context Creation

//! @SYMTestActions Explicitly start Spud. Spud starts a lower NIF for the primary context, which returns an error.

//! @SYMTestExpectedResults starting Spud fails. RConnection::Start returns an error.

//! @SYMTestPriority Critical

//! @SYMTestStatus Implemented

//! @SYMTestType CIT

RUN_TEST_STEP 30 TE_SpudNetworkSide CSpudPrimary z:\testdata\configs\te_spudNetworkSide_platsec.ini PrimaryLowerNifStartError210

DELAY 3000

RUN_TEST_STEP 60 TE_SpudNetworkSide CESockCheck z:\testdata\configs\te_spudNetworkSide.ini ESockCheck

END_TESTCASE            NET-Spud-NetworkSide-1202

run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script

run_script z:\TestData\scripts\te_esock_test_loadesock.script

// Wait for Nifman Idle timeout to kill the interface

DELAY 10000

START_TESTCASE          NET-Spud-NetworkSide-1203

//! @SYMTestCaseID      NET-Spud-NetworkSide-1203

//! @SYMTestCaseDesc Network Deletes primary context when lower NIF was started, and SPUD waits for LinkLayerUp.  

//! @SYMFssID NETWORKING/Spud/Control Plane/Primary PDP Context Creation

//! @SYMTestActions Explicitly start Spud. Spud starts the lower NIF for the primary, which "takes a long time to start, i.e. no LinkLayerUp/Down. SIM TSY deletes the primary context.

//! @SYMTestExpectedResults Start on Spud fails. Nifman progress 2000 with KErrDisconnected is received by the test app.

//! @SYMTestPriority Critical

//! @SYMTestStatus Implemented

//! @SYMTestType CIT

RUN_TEST_STEP 30 TE_SpudNetworkSide CSpudPrimaryEventOnLowerNifStarting z:\testdata\configs\te_spudNetworkSide.ini PrimaryDeleteOnLowerNifStart212

DELAY 3000

RUN_TEST_STEP 60 TE_SpudNetworkSide CESockCheck z:\testdata\configs\te_spudNetworkSide.ini ESockCheck

END_TESTCASE            NET-Spud-NetworkSide-1203

// The following tests use different CommDB entries

run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script

ced -i z:\TestData\Configs\TE_SpudNetworkSide_PppLoopback.xml

run_script z:\TestData\scripts\te_esock_test_loadesock.script

RUN_UTILS  MakeReadWrite c:\loopback.ini

RUN_UTILS  DeleteFile c:\loopback.ini

RUN_UTILS  CopyFile z:\TestData\Configs\TE_SpudNetworkSideLoopbackCSY_serial.ini c:\loopback.ini

START_TESTCASE          NET-Spud-NetworkSide-1204

//! @SYMTestCaseID      NET-Spud-NetworkSide-1204

//! @SYMTestCaseDesc Sanity check: successfully activate Primary context using PPP as a lower NIF

//! @SYMFssID NETWORKING/Spud/Control Plane/Primary PDP Context Creation

//! @SYMTestActions Explicitly start the SPUD interface using PPP. Also start a PPP server connected to the port from the SPUD. SIM TSY, etc successfully activate the primary context.

//! @SYMTestExpectedResults  Primary PDP context is activated, SPUD is started: RConnection::Start on SPUD returns KErrNone.

//! @SYMTestPriority Critical

//! @SYMTestStatus Implemented

//! @SYMTestType CIT

RUN_TEST_STEP 60 TE_SpudNetworkSide CSpudPppPrimary z:\testdata\configs\te_spudNetworkSide.ini PppPrimaryOk

DELAY 3000

RUN_TEST_STEP 60 TE_SpudNetworkSide CESockCheck z:\testdata\configs\te_spudNetworkSide.ini ESockCheck

END_TESTCASE            NET-Spud-NetworkSide-1204

run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script

run_script z:\TestData\scripts\te_esock_test_loadesock.script

START_TESTCASE          NET-Spud-NetworkSide-1205

//! @SYMTestCaseID      NET-Spud-NetworkSide-1205

//! @SYMTestCaseDesc Successfully activate a secondary context and send data using the secondary context, using PPP as the lower NIF

//! @SYMFssID NETWORKING/Spud/Control Plane/Secondary PDP Context Creation

//! @SYMTestActions Open a socket with QoS parameters. Also start 2 PPP server instances on loopback ports opposite the primary and secondary contexts of the SPUD. Send data to and from the secondary context of SPUD.

//! @SYMTestExpectedResults  Primary PDP context is activated, SPUD is started: RConnection::Start on SPUD returns KErrNone. Send as well as RecvFrom complete successfully.

//! @SYMTestPriority Critical

//! @SYMTestStatus Implemented

//! @SYMTestType CIT

RUN_TEST_STEP 600 TE_SpudNetworkSide CSpudPppSecondarySend z:\testdata\configs\te_spudNetworkSide.ini PppSecondarySend

DELAY 3000

RUN_TEST_STEP 60 TE_SpudNetworkSide CESockCheck z:\testdata\configs\te_spudNetworkSide.ini ESockCheck

END_TESTCASE            NET-Spud-NetworkSide-1205

run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script

run_script z:\TestData\scripts\te_esock_test_loadesock.script

RUN_UTILS  MakeReadWrite c:\simtsy\config.txt

RUN_UTILS  MakeReadWrite c:\config.txt

RUN_UTILS  DeleteFile c:\simtsy\config.txt

RUN_UTILS  DeleteFile c:\config.txt

RUN_UTILS  DeleteFile c:\loopback.ini

run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script