// Copyright (c) 2002-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// This file implements the CIPv6ProtocolIf class, which handles the transmission

// of IPv6 data to and from the TCP/IP stack.

// 

//

/**

 @file

*/

#include <e32hal.h>	// UserHal::MachineInfo()

#include <etelpckt.h>

#include <in_iface.h>

#include <in6_if.h>

#include "RawIPNifMain.h"

#include "IPv6ProtocolIf.h"

#ifdef WCDMA_STUB

#include <UMTSNifControlIf.h>

#endif

#define LOG_IP_ADDRESS(desc,addr) _LOG_L2C5(_L8("    " desc " = %d:%d:%d:%d from context"), \

			addr[3], addr[2], addr[1], addr[0]);

CIPv6ProtocolIf::CIPv6ProtocolIf(CRawIPNifMain& aNifMain, CBttLogger* aTheLogger)

/**

 * Constructor

 */ 

	: CProtocolIfBase(aNifMain,aTheLogger),

	  iTheLogger(aTheLogger), 

	  iSpeedMetric(KDefaultSpeedMetric)

	{

	}

CIPv6ProtocolIf::~CIPv6ProtocolIf()

/**

 *	Destructor

 */

	{

	}

void CIPv6ProtocolIf::BindL(TAny* aId)

/**

 *	Binds protocol to the Nif

 *

 *	@param aId A point the the protocol(TCP/IP)

 */

	{

	_LOG_L1C2(_L8("CIPv6ProtocolIf::BindL [aId=%X]"), aId);

	CProtocolIfBase::BindL(aId); // Call the superclass's method.

	iNotify = iNifMain.Notify();

	}

TInt CIPv6ProtocolIf::Control(TUint aLevel, TUint aName, TDes8& aOption,

							TAny* /*aSource*/)

/**

 * The main function called by the TCP/IP protocol to control the interface.

 * Can perform a variety of general IP tasks (such as getting IP config)

 * and "3G" specific tasks (such as deleting the context).

 *

 * @param aLevel The level of the interface to control - always KSOLInterface

 * @param aName The command to perform

 * @param aOption Data to be input/output as a result of the command

 * @param aSource The source of the command (unused)

 * @return Standard error codes

 */

	{

	_LOG_L1C3(_L8("CIPv6ProtocolIf::Control [aLevel=%d, aName=%d]"),

		aLevel, aName);

	if (aLevel == KSOLInterface)

		{

		switch (aName)

			{

		// General IP configuration commands are below this point.

		case KSoIfInfo6:

			// Gets information about the interface, such as name and MTU.

			return WriteIfInfo(aOption);

		case KSoIfConfig:

			// Gets interface configuration, eg. IP address and DNS servers.

			return WriteIfConfig(aOption);

		case KSoIfGetConnectionInfo:

			// Gets IAP and network information.

			return WriteConnectionInfo(aOption);

		case KSoIfHardwareAddr:

			// unsupported because we don't have a h/w address

		case KSoIfCompareAddr:

			// this never actually appears to be called

			break;

		// 3G-specific configuration commands are below this point.

#ifdef WCDMA_STUB

		case KRegisterEventHandler:

			// Raw IP NIF Events are not supported

		case KContextSetEvents:

			// Raw IP NIF Events are not supported

			break;

		case KContextCreate:

			// We don't support creating new secondary contexts.

			break;

		case KContextDelete:

			// Deletes the primary PDP context. This will shut down the Nif.

			return DeleteContext(aOption);

		case KContextActivate:

			// If the IPv6 interface is up, then the context will already have

			// been activated. So this command should fail with 

			// KErrAlreadyExists

			{

			TUint8* ptr = CONST_CAST(TUint8*, aOption.Ptr()); 

			TContextParameters* contextParams =

				REINTERPRET_CAST(TContextParameters*, ptr);

			if (contextParams->iContextInfo.iContextId != 

				STATIC_CAST(TInt8, GetNifMain().GetBcaController()->Nsapi()))

				{

				contextParams->iReasonCode = KErrNotFound;

				}

			else

				{

				contextParams->iContextInfo.iStatus =

					GetNifMain().GetContextStatus();

				contextParams->iReasonCode = KErrAlreadyExists;

				}

			return KErrNone;

			}

		case KNifSetDefaultQoS:

		case KContextQoSSet:

			// Setting the QoS is meaningless over GPRS, so we just return that

			// we don't support these operations.

			break;

		case KContextTFTModify:

			// As we only have one primary context, we don't support anything

			// to do with traffic flow templates, which are used by secondary

			// contexts.

			break;

		case KContextModifyActive:

			// This command is only valid aftermodifying TFT/QoS parameters. 

			// As we don't support any of these operations,

			// this command is never valid.

			break;

#endif

		default:

			break;

			}

		}

	return KErrNotSupported;

	}

TInt CIPv6ProtocolIf::WriteIfConfig(TDes8& aIfConfig)

/**

 * Writes the configuration of the interface (eg. IP address, DNS servers)

 * into the supplied descriptor.

 *

 * @param aIfConfig Will contain the interface configuration

 * @return KErrNotSupported if an incorrect structure is passed, 

 * otherwise KErrNone

 */

	{

	_LOG_L1C1(_L8("CIPv6ProtocolIf::WriteIfConfig"));

	__ASSERT_DEBUG((TUint)aIfConfig.MaxLength() >= sizeof (TSoInet6IfConfig), User::Panic(KIPv6ProtocolIfName, 0));

	if ((TUint)aIfConfig.MaxLength() < sizeof(TSoInet6IfConfig))

		{

		return KErrArgument;

		}

	TUint8* ptr = CONST_CAST(TUint8*, aIfConfig.Ptr());

	TSoInet6IfConfig* config = REINTERPRET_CAST(TSoInet6IfConfig*, ptr);

	TEui64Addr& localId = TEui64Addr::Cast(config->iLocalId);

	localId = iSettings.iLocalIfId;

	// If required, configure static DNS addresses

	if (!iSettings.iPrimaryDns.IsUnspecified())

		{

		config->iNameSer1.SetAddress(iSettings.iPrimaryDns);

		if (!iSettings.iSecondaryDns.IsUnspecified())

			config->iNameSer2.SetAddress(iSettings.iSecondaryDns);

		}

	config->idPaddingBits = 0;

	return KErrNone;

	}

TInt CIPv6ProtocolIf::WriteIfInfo(TDes8& aIfInfo)

/**

 * Writes information about the interface into the supplied descriptor.

 *

 * @param aIfInfo Will contain the interface information

 * @return KErrArgument if an incorrect structure is passed, otherwise KErrNone

 */

	{

	_LOG_L1C1(_L8("CIPv6ProtocolIf::WriteIfInfo"));

	__ASSERT_DEBUG((TUint)aIfInfo.MaxLength() >= sizeof (TSoIfInfo6), User::Panic(KIPv6ProtocolIfName, 0));

	if ((TUint)aIfInfo.MaxLength() < sizeof(TSoIfInfo6))

		{

		return KErrArgument;

		}

	TSoIfInfo6* info = (TSoIfInfo6*) aIfInfo.Ptr();

	info->iFeatures = KIfCanBroadcast | KIfCanMulticast;

	info->iSpeedMetric = iSpeedMetric;

	info->iMtu = KDefaultMtu;

	info->iRMtu = KDefaultMtu;

	WriteIfName(info->iName);

	return KErrNone;

	}

TInt CIPv6ProtocolIf::WriteConnectionInfo(TDes8& aConnectionInfo)

/**

 * Writes information about the IAP and network we're associated with. This

 * is used to route data in a multi-homing environment.

 *

 * @param aConnectionInfo Will contain the connection information

 * @return Standard CommDB error codes

 */

	{

	_LOG_L1C1(_L8("CIPv6ProtocolIf::WriteConnectionInfo"));

	TSoIfConnectionInfo* connectionInfo =

		(TSoIfConnectionInfo*) aConnectionInfo.Ptr();

	TInt err;

	// Append the 2 commdb filed into this descriptor

	TBuf<2*KCommsDbSvrMaxColumnNameLength+1> fieldName;

	fieldName.Copy(TPtrC(IAP));

	fieldName.Append(KSlashChar);

	fieldName.Append(TPtrC(COMMDB_ID));

	err = GetNifMain().GetAgent()->ReadInt(fieldName, connectionInfo->iIAPId);

	if (err != KErrNone)

		{

		return err;

		}

	fieldName.Copy(TPtrC(IAP));

	fieldName.Append(KSlashChar);

	fieldName.Append(TPtrC(IAP_NETWORK));

	err = GetNifMain().GetAgent()->ReadInt(fieldName, connectionInfo->iNetworkId);

	if (err != KErrNone)

		{

		return err;

		}

	return KErrNone;

	}

#ifdef WCDMA_STUB

TInt CIPv6ProtocolIf::DeleteContext(TDes8& aContextParameters)

/**

 * Deletes a context. As the NIF is responsible for one primary context,

 * this is equivalent to closing down the NIF.

 *

 * @param aContextParameters Parameters of the context to delete

 * @return KErrArgument if an incorrect structure is passed, otherwise KErrNone

 */

	{

	_LOG_L1C1(_L8("CIPv6ProtocolIf::DeleteContext"));

	if (aContextParameters.Length() != sizeof(TContextParameters))

		{

		return KErrArgument;

		}

	TUint8* ptr = CONST_CAST(TUint8*, aContextParameters.Ptr());

	TContextParameters* params = REINTERPRET_CAST(TContextParameters*, ptr);

	if (params->iContextInfo.iContextId != 

		STATIC_CAST(TInt8, GetNifMain().GetBcaController()->Nsapi()))

		{

		params->iReasonCode = KErrBadName;

		}

	else

		{

		params->iReasonCode = KErrNone; 

		GetNifMain().Stop(KErrNone, MNifIfNotify::EDisconnect);

		}

	return KErrNone;

	}

#endif

void CIPv6ProtocolIf::ReadCommDbGprsSettingsL()

/**

 * Reads GPRS IP settings from CommDB via the agent.

 */

	{

	_LOG_L1C1(_L8("CIPv6ProtocolIf::ReadCommDbGprsSettings"));

	// Read he DNS addresses..

	ReadIPv6SettingL(TPtrC(GPRS_IP6_NAME_SERVER1), iSettings.iPrimaryDns);

	ReadIPv6SettingL(TPtrC(GPRS_IP6_NAME_SERVER2), iSettings.iSecondaryDns);	

	// Read whether to get the DNS addresses from the server.

	_BTT_LEAVEIFERROR(GetNifMain().GetAgent()->ReadBool(

		TPtrC(GPRS_IP6_DNS_ADDR_FROM_SERVER),

		iSettings.iGetDnsFromServer));

	// Read whether to get IPv4 address from the server

	// This is only needed for the integration tests. If it's true then 

	// the IPv4 address will be used to build up the IPv6 address. 

	_BTT_LEAVEIFERROR(GetNifMain().GetAgent()->ReadBool(

		TPtrC(GPRS_IP_ADDR_FROM_SERVER),

		iSettings.iGetIpFromServer));

	if (iSettings.iGetIpFromServer == EFalse)

		{

		// Sets the IPv6 Link-local address from IpAddr.

		// LocalId is derived from IpAddr and it's further used to set the Link-local

		// address elsewhere by adding a prefix (FE80::) in front.

		// For IpAddr: 192.168.1.1, link-local address will be FE80::C0A8:101.

		TUint32 ipAddr;	

		ReadIPv4SettingL(TPtrC(GPRS_IP_ADDR), ipAddr);

		const TUint8 constantId[8] = { 0, 0, 0, 0, 

									ipAddr >> 24, (ipAddr >> 16) & 0xFF, 

									(ipAddr >> 8) & 0xFF, ipAddr & 0xFF }; 

		iSettings.iLocalIfId.SetAddr(constantId, sizeof (constantId));

		}

	else

		{

		//

		// Use the 64 bit id of MARM machines as our interface id

		//

		TMachineInfoV1Buf machineInfo;	

		UserHal::MachineInfo(machineInfo);

		iSettings.iLocalIfId.SetAddr(machineInfo().iMachineUniqueId);

		iSettings.iLocalIfId.SetUniversalBit(0);

		//

		// In WINS environment the id is zero which is no-no

		//

		if (iSettings.iLocalIfId.IsZero())

			{

			iSettings.iLocalIfId.SetAddrRandomNZ();

			}		

		}

	}

void CIPv6ProtocolIf::UpdateContextConfigL(const

										  RPacketContext::TContextConfigGPRS&

										  aConfig)

/**

 * Called when the context has been activated to set our IP address and get

 * any other required settings from CommDB.

 *

 * @param aConfig The new context config

 */

	{

	_LOG_L1C1(_L8("CIPv6ProtocolIf::UpdateContextConfig"));

	// Get the settings which are stored in CommDB.

	ReadCommDbGprsSettingsL();

	// Get our IP address from the GPRS context config.

	TInetAddr address;

	TBuf<RPacketContext::KMaxPDPAddressLength> tempAddr;

	tempAddr.Copy(aConfig.iPdpAddress);

	TInt ret = address.Input(tempAddr);

	// We've got our IP address! Let's save it.

	if (ret == KErrNone)

		{

		iSettings.iLocalAddr = address.Ip6Address();

		LOG_IP_ADDRESS("Got local IP address", iSettings.iLocalAddr);

		}

	else

		{

		_LOG_L2C2(_L8("Couldn't get IP address from GPRS config (err: %d)"),

			ret);

		// Don't leave on this error: we may still be OK if we read some

		// settings from CommDB.

		}

	// @todo - is this correct. We can only get the DNS addresses

	// from the TSY using the iProtocolConfigOption data. Yet a client could

	// access those DNS config details without knowing about the state of the

	// iSettings.iGetDnsFromServer flag.

	if ((iSettings.iGetDnsFromServer) ||

		((iSettings.iPrimaryDns.IsUnspecified()) &&

		 (iSettings.iSecondaryDns.IsUnspecified())) ) 

		{

		TBuf<RPacketContext::KMaxPDPAddressLength> tempAddr;

		tempAddr.Copy(aConfig.iProtocolConfigOption.iDnsAddresses.iPrimaryDns);

		ret = address.Input(tempAddr);

		if (ret == KErrNone)

			{

			iSettings.iPrimaryDns = address.Ip6Address();

			LOG_IP_ADDRESS("Got primary DNS", iSettings.iPrimaryDns);

			}

		else

			{

			_LOG_L2C2(_L8("Couldn't get primary DNS address from GPRS config (err: %d)"),

				ret);

			// Don't leave on this error: we may still be OK if we read some

			// settings from CommDB.

			}

		tempAddr.Copy(aConfig.iProtocolConfigOption.iDnsAddresses.iSecondaryDns);

		ret = address.Input(tempAddr);

		if (ret == KErrNone)

			{

			iSettings.iSecondaryDns = address.Ip6Address();

			LOG_IP_ADDRESS("Got secondary DNS", iSettings.iPrimaryDns);

			}

		else

			{

			_LOG_L2C2(_L8("Couldn't get secondary DNS address from GPRS config (err: %d)"),

				ret);

			// Don't leave on this error: we may still be OK if we read some

			// settings from CommDB.

			}

		}

	else

		{

		LOG_IP_ADDRESS("Using CommDB DNS address - Primary ", iSettings.iPrimaryDns);

		LOG_IP_ADDRESS("                         - Secondary ", iSettings.iSecondaryDns);

		}

	}

void CIPv6ProtocolIf::UpdateConnectionSpeed(TUint aConnectionSpeed)

/**

 * Sets the speed metric to return to TCP/IP, based on what the TSY tells us.

 *

 * @param aConnectionSpeed Our connection speed

 */

	{

	_LOG_L1C1(_L8("CIPv6ProtocolIf::UpdateConnectionSpeed"));

	iSpeedMetric = aConnectionSpeed;

	}

void CIPv6ProtocolIf::ReadIPv4SettingL(const TDesC& aFieldName,

									   TUint32& aIpAddr)

/**

 * Reads an IPv4 address from CommDB, via the TRP agent. It leaves if an error

 * other than KErrNotFound occurs.

 *

 * @param aFieldName The name of the field to read

 * @param aIpAddr Will contain the IP address

 */

	{

#ifdef __BTT_LOGGING__

	TBuf8<256> debugBuffer;

	debugBuffer.Copy(aFieldName);

	_LOG_L1C2(_L8("CIPv6ProtocolIf::ReadIp4Setting [aFieldName=%S]"),

		&debugBuffer);

#endif

	TBuf<KCommsDbSvrMaxFieldLength> name;

	TInetAddr ip4Addr;

	TInt ret = GetNifMain().GetAgent()->ReadDes(aFieldName, name);

	if (ret == KErrNone)

		{

		// We've successfully read an IP address, so convert it into a number.

		ip4Addr.Input(name);

		aIpAddr = ip4Addr.Address();

		}

	else

		{

		// We couldn't get the IP address, so set it to 0.0.0.0. Note that we