[test1]
# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

# 
# The context configuration items for this test step
# All of the contexts are set-up to have no pauses or errors when activating, deactivating or deleting
R99ContextConfig = PRIMARY1, 0, 0, 0, 0, 0, 0, 0
R99ContextConfig = PRIMARY2, 0, 0, 0, 0, 0, 0, 0
R99ContextConfig = PRIMARY3, 0, 0, 0, 0, 0, 0, 0
R99ContextConfig = SECONDARY1, 0, 0, 0, 0, 0, 0, 0

# 
# The TTFTInfo TFT filters for this test step
# The following entry corresponds to values assigned by the method DefaultPacketFilter1
TFTfilter = 	0, 1, 0.0.0.0.0.0.0.0.0.0.255.255.1.1.1.1, 0.0.0.0.0.0.0.0.0.0.255.255.255.255.255.255, 1, 1, 1, 1, 1, 1, 1, 1
# The following entry corresponds to values assigned by the method DefaultPacketFilter2
TFTfilter = 	1, 2, 0.0.0.0.0.0.0.0.0.0.255.255.1.1.1.1, 0.0.0.0.0.0.0.0.0.0.255.255.255.255.255.255, 2, 2, 2, 2, 2, 2, 2, 2
# The following entry corresponds to values assigned by the method DefaultPacketFilter3
TFTfilter = 	2, 3, 0.0.0.0.0.0.0.0.0.0.255.255.1.1.1.1, 0.0.0.0.0.0.0.0.0.0.255.255.255.255.255.255, 3, 3, 3, 3, 3, 3, 3, 3

# 
# Configure the context's status to be changed using publish and subscribe
NotifyContextStatusChangeType = PublishSubscribe
# NotifyContextStatusChange <iContextName>, <iDuration>, <iStatus>
# When the value 0 is published to KPSSimtsyPacketContextStatusChange the context will be suspended (status = EStatusSuspended = 5)
NotifyContextStatusChange = PRIMARY1, 0, 5
# When the value 1 is published to KPSSimtsyPacketContextStatusChange the context will be resumed (status = EStatusActive = 3)
NotifyContextStatusChange = PRIMARY1, 0, 3

# 
# QoS profiles for this test step
# The following entries are the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested for all 3 contexts
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00

# The following entries correspond to the values assigned by the method SecondQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = PRIMARY3, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1

QosProfileReqR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5 = PRIMARY3, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00

# The following entries are the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated for all 3 contexts
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = PRIMARY3, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2

QosProfileNegR5= PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = PRIMARY3, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
# The following entries correspond to the values assigned by the method SecondQoSR99_R4Negotiated for all 3 contexts
QosProfileNegR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1
QosProfileNegR99 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1
QosProfileNegR99 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1

QosProfileNegR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileNegR5 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileNegR5 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00


# 
# The InitialiseContext parameters for this test step
# The following entries correspond to the values assigned by the method DefaultTestDataChannel
CommSetup= SIMTSYLOOPBACK.CSY, SIMTSYLOOPBACK::0, 18, 0

[test3]
# 
# Set-up calls to SetConfig to fail for the first primary context
# The -1 sets up SetConfig to fail every time, and the -2 causes SetConfig to fail with error KErrGeneral (-2)
SetConfigFail = PRIMARY1, -1, -2

[test6]
# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

# 
# There are no QosProfileReqR99 entries. This will make a call to SetProfileParameters to fail.

[test7]
# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

# 
# QoS profiles for this test step
# The following entries are the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
# The following entries are the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2

QosProfileNegR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00

# 
# Set-up calls to modify the TFT to fail for the first primary context
# The first call to DeleteTFT will fail with error code KErrGeneral (-2) (and subsequent calls will pass)
DeleteTftFail = PRIMARY1, 1, -2
# The first call to CreateNewTFT will fail with error code KErrGeneral (-2) (and subsequent calls will pass)
CreateTftConfig = PRIMARY1, 1, -2
# The first call to AddPacketFilter will fail with error code KErrGeneral (-2) (and subsequent calls will pass)
AddPacketFilter = PRIMARY1, 1, -2

[test8]
# 
# The context configuration items for this test step
# Set-up the first primary context to fail activating with error code KErrGeneral (-2)
R99ContextConfig = PRIMARY1, 0, -2, 0, 0, 0, 0, 0

# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

# 
# QoS profiles for this test step
# The following entries are the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00


# The following entries are the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2

QosProfileNegR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00

[test14]
# 
# The context configuration items for this test step
# Set-up the first primary context to fail activating with error code KErrGeneral (-2)
R99ContextConfig = PRIMARY1, 0, 0, 0, 0, 0, 0, 0

# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

# 
# QoS profiles for this test step
# The following entries are the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00

# The following entries are the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2

QosProfileNegR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00

# 
# The InitialiseContext parameters for this test step
# The first 4 elements correspond to the values assigned by the method DefaultTestDataChannel
# The last two set up the first call to InitialiseContext for the first primary context to fail with error code KErrGeneral (-2)
CommSetup= SIMTSYLOOPBACK.CSY, SIMTSYLOOPBACK::0, 18, 0, PRIMARY1, 0, 1, -2

[test9]
# 
# The context configuration items for this test step
# Set-up the first primary context to fail de-activating with error code KErrGeneral (-2)
R99ContextConfig = PRIMARY1, 0, 0, 0, -2, 0, 0, 0

# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

# The following entry is the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
# The following entry is the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
[test10]
# 
# The context configuration items for this test step
# Set-up the first primary context to fail deleting with error code KErrGeneral (-2)
R99ContextConfig = PRIMARY1, 0, 0, 0, 0, 0, -2, 0

# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

# The following entry is the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
# The following entry is the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR5  = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
[test11]
# 
# The context configuration items for this test step
# All of the contexts are set-up to have no pauses or errors when activating, deactivating or deleting
R99ContextConfig = PRIMARY1, 0, 0, 0, 0, 0, 0, 0
R99ContextConfig = PRIMARY2, 0, 0, 0, 0, 0, 0, 0
R99ContextConfig = SECONDARY1, 0, 0, 0, 0, 0, 0, 0
R99ContextConfig = SECONDARY2, 0, 0, 0, 0, 0, 0, 0

# 
# The TTFTInfo TFT filters for this test step
# The following entry corresponds to values assigned by the method DefaultPacketFilter1
TFTfilter = 0, 1, 0.0.0.0.0.0.0.0.0.0.255.255.1.1.1.1, 0.0.0.0.0.0.0.0.0.0.255.255.255.255.255.255, 1, 1, 1, 1, 1, 1, 1, 1
# The following entry corresponds to values assigned by the method DefaultPacketFilter2
TFTfilter = 1, 2, 0.0.0.0.0.0.0.0.0.0.255.255.1.1.1.1, 0.0.0.0.0.0.0.0.0.0.255.255.255.255.255.255, 2, 2, 2, 2, 2, 2, 2, 2

# 
# QoS profiles for this test step
# The following entries are the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested for all 3 contexts
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = SECONDARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = SECONDARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
# The following entries correspond to the values assigned by the method SecondQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = SECONDARY2, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1


QosProfileReqR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5= SECONDARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5 = SECONDARY2, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00

# The following entries are the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated for all 3 contexts
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = SECONDARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2


QosProfileNegR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = SECONDARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00

# The following entries correspond to the values assigned by the method SecondQoSR99_R4Negotiated for all 3 contexts
QosProfileNegR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1
QosProfileNegR99 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1
QosProfileNegR99 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1
QosProfileNegR99 = SECONDARY2, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1

QosProfileNegR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileNegR5 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileNegR5 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileNegR5 = SECONDARY2, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00

# 
# The InitialiseContext parameters for this test step
# The following entries correspond to the values assigned by the method DefaultTestDataChannel
CommSetup= SIMTSYLOOPBACK.CSY, SIMTSYLOOPBACK::0, 18, 0

# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

[test12]

#
# Set up the second primary to pause during activate and delete so there is a chance to cancel the request. Also, do not connect to NT Ras.
R99ContextConfig = PRIMARY1, 0, 0, 0, 0, 0, 0, 0
R99ContextConfig = PRIMARY2, 10, 0, 0, 0, 10, 0, 0
R99ContextConfig = SECONDARY1, 0, 0, 0, 0, 0, 0, 0

#
# SetConfig delay is set to 1 so there is a chance to cancel setting QOS
SetConfigDelay=1

# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

# 
# QoS profiles for this test step
# The following entries are the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2


QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00

# The following entries are the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2


QosProfileNegR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00

# 
# The TTFTInfo TFT filters for this test step
# The following entry corresponds to values assigned by the method DefaultPacketFilter1
TFTfilter = 0, 1, 0.0.0.0.0.0.0.0.0.0.255.255.1.1.1.1, 0.0.0.0.0.0.0.0.0.0.255.255.255.255.255.255, 1, 1, 1, 1, 1, 1, 1, 1
# The following entry corresponds to values assigned by the method DefaultPacketFilter2
TFTfilter = 1, 2, 0.0.0.0.0.0.0.0.0.0.255.255.1.1.1.1, 0.0.0.0.0.0.0.0.0.0.255.255.255.255.255.255, 2, 2, 2, 2, 2, 2, 2, 2

# 
# The InitialiseContext parameters for this test step
# The first 4 elements (on all 3 entries) correspond to the values assigned by the method DefaultTestDataChannel
CommSetup= SIMTSYLOOPBACK.CSY, SIMTSYLOOPBACK::0, 18, 0, PRIMARY1
# The last element of the next 2 entries mean any calls to InitialiseContext will have a delay of 1 second so there is a chance to cancel creating contexts
CommSetup= SIMTSYLOOPBACK.CSY, SIMTSYLOOPBACK::0, 18, 0, PRIMARY2, 0, 0, 0, 1
CommSetup= SIMTSYLOOPBACK.CSY, SIMTSYLOOPBACK::0, 18, 0, SECONDARY1, 0, 0, 0, 1

# 
# The CreateNewTFT entries for this test step
# The last entry causes a call to CreateNewTFT to have a delay of 1 second so there is a chance to cancel setting TFT
CreateTftConfig = PRIMARY1, 0, 0, 1

[test102]
# 
# Set-up calls to SetConfig to fail for the first primary context
# The -1 sets up SetConfig to fail every time, and the -2 causes SetConfig to fail with error KErrGeneral (-2)
SetConfigFail = PRIMARY1, -1, -2

[test103]
# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

# 
# There are no QosProfileReqR99 entries. This will make a call to SetProfileParameters to fail.

[test104]
# 
# The context configuration items for this test step
# Set-up the first primary context to fail activating with error code KErrGeneral (-2)
R99ContextConfig = PRIMARY1, 0, -2, 0, 0, 0, 0, 0

# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

[test105]
# 
# QoS profiles for this test step
# The following entries are the requested profiles - they correspond to the values assigned by the method DefaultQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00


# The following entries correspond to the values assigned by the method SecondQoSR99_R4Requested
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1

QosProfileNegR5= PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00

# 
# The context configuration items for this test step
# All of the contexts are set-up to have no pauses or errors when activating, deactivating or deleting
R99ContextConfig = PRIMARY1, 0, 0, 0, 0, 0, 0, 0

# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

# 
# The InitialiseContext parameters for this test step
# The first 4 elements (on both entries) correspond to the values assigned by the method DefaultTestDataChannel
CommSetup= SIMTSYLOOPBACK.CSY, SIMTSYLOOPBACK::0, 18, 0, PRIMARY1
# The last two elements set up the first call to InitialiseContext on the first secondary context to fail with error code KErrGeneral (-2)
CommSetup= SIMTSYLOOPBACK.CSY, SIMTSYLOOPBACK::0, 18, 0, SECONDARY1, 0, 1, -2

[test106]
SetProfileFail = SECONDARY1, -1, -2

# 
# Set-up calls to modify the TFT to fail for the first primary context
# The first call to DeleteTFT will fail with error code KErrGeneral (-2) (and subsequent calls will pass)
DeleteTftFail = SECONDARY1, 1, -2
# The first call to CreateNewTFT will fail with error code KErrGeneral (-2) (and subsequent calls will pass)
CreateTftFail = SECONDARY1, 1, -2
# The first call to AddPacketFilter will fail with error code KErrGeneral (-2) (and subsequent calls will pass)
AddPacketFilter = SECONDARY1, 1, -2

# 
# The context configuration items for this test step
# Set-up the first primary context to proceed normally
R99ContextConfig = PRIMARY1, 0, 0, 0, 0, 0, 0, 0
# Set-up the first secondary context to fail activating with error code KErrGeneral (-2)
R99ContextConfig = SECONDARY1, 0, -2, 0, 0, 0, 0, 0

# 
# QoS profiles for this test step
# The following entries are the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested for both contexts
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00

# The following entries correspond to the values assigned by the method SecondQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1

QosProfileReqR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00

# The following entries are the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated for both contexts
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2

QosProfileNegR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00

# The following entries correspond to the values assigned by the method SecondQoSR99_R4Negotiated for all 3 contexts
QosProfileNegR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1
QosProfileNegR99 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1

QosProfileNegR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileNegR5 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00



# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

[test107]
SetProfileFail = SECONDARY1, -1, -2

DeleteTftFail = SECONDARY1, 1, -2
CreateTftFail = SECONDARY1, 1, -2
AddPacketFilter = SECONDARY1, 1, -2

# 
# The context configuration items for this test step
# All of the contexts are set-up to have no pauses or errors when activating, deactivating or deleting
R99ContextConfig = PRIMARY1, 0, 0, 0, 0, 0, 0, 0
R99ContextConfig = SECONDARY1, 0, 0, 0, 0, 0, 0, 0

# 
# The InitialiseContext parameters for this test step
# The following entries correspond to the values assigned by the method DefaultTestDataChannel
CommSetup= SIMTSYLOOPBACK.CSY, SIMTSYLOOPBACK::0, 18, 0

# 
# QoS profiles for this test step
# The following entries are the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested for both contexts
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00

# The following entries correspond to the values assigned by the method SecondQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1


QosProfileReqR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00

# The following entries are the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated for both contexts
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2

QosProfileNegR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00

# The following entries correspond to the values assigned by the method SecondQoSR99_R4Negotiated for all 3 contexts
QosProfileNegR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1
QosProfileNegR99 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1

QosProfileNegR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileNegR5 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00

# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

[test108]
# 
# Configure the context's status to be changed using publish and subscribe
NotifyContextStatusChangeType = PublishSubscribe
# NotifyContextStatusChange <iContextName>, <iDuration>, <iStatus>
# When the value 0 is published to KPSSimtsyPacketContextStatusChange the first primary context will be deleted (status = EStatusDeleted = 6)
NotifyContextStatusChange = PRIMARY1, 0, 6
# When the value 1 is published to KPSSimtsyPacketContextStatusChange the second primary context will be deleted (status = EStatusDeleted = 6)
NotifyContextStatusChange = PRIMARY2, 0, 6

# 
# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigGPRS= 1, ACME INTERNET PROVIDERS LTD, i-MODE GATEWAY, 1, 1, 1, 1, USER1, PASSWORD1, CHALLENGE1, RESPONSE1, PRIMARYSERVER1, SECONDARYSERVER1, 1

# 
# The context configuration items for this test step
# Set-up the first primary context to pause for a long period when activating, so that there is a pause where the simtsy can delete the context
R99ContextConfig = PRIMARY1, 999, 0, 0, 0, 0, 0, 0
# Set-up the second primary context to have no pauses or errors when activating, deactivating or deleting
R99ContextConfig = PRIMARY2, 0, 0, 0, 0, 0, 0, 0

# 
# QoS profiles for this test step
# The following entries are the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested for all 3 contexts
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00

# The following entries correspond to the values assigned by the method SecondQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1

QosProfileReqR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00

# The following entries are the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated for all 3 contexts
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2

QosProfileNegR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00

# The following entries correspond to the values assigned by the method SecondQoSR99_R4Negotiated for all 3 contexts
QosProfileNegR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1
QosProfileNegR99 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1

QosProfileNegR5= PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileNegR5 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00

[test109]

# NOTE - This is the same as test1 but with Rel5 parameters

#DefaultContextParamRel5= <TProtocolType>, <TGSNAddress>, <TProtocolAddress>, <TUseEdge>, <Authentication Protocol>, <Username>, <Password>, <Challenge>,
# <Response>, <PrimaryDNS>, <SecondaryDNS>, <TUint iId>, <THeaderCompression>, <TDataCompression>, <No. Additional Context Config Params>
DefaultContextParamRel5= 0, SYMBIAN INTERNET PROVIDER, PROTOCOL ADDRESS, 0, 2, USER3, PASSWORD3, CHALLENGE3, RESPONSE3, PRIMARYSERVER3, SECONDARYSERVER3, 3, 2, 1, 1
#AdditionalParamItem= <TPcoProtocolId>, <TBuf8 AdditionalParamData>
AdditionalParamItem= 0x04, ADDITIONALPARAM1

# The RPacketContext::TContextConfigGPRS parameters for this test step
# The parameters are identical to those assigned in the method DefaultTestContextConfigGPRS
SetContextConfigR5= 0, SYMBIAN INTERNET PROVIDER, PROTOCOL ADDRESS, 0, 2, USER3, PASSWORD3, CHALLENGE3, RESPONSE3, PRIMARYSERVER3, SECONDARYSERVER3, 3, 2, 1, 1
#AdditionalParamItem= <TPcoProtocolId>, <TBuf8 AdditionalParamData>
AdditionalParamItem= 0x04, ADDITIONALPARAM1



# 
# The context configuration items for this test step
# All of the contexts are set-up to have no pauses or errors when activating, deactivating or deleting
R99ContextConfig = PRIMARY1, 0, 0, 0, 0, 0, 0, 0
R99ContextConfig = PRIMARY2, 0, 0, 0, 0, 0, 0, 0
R99ContextConfig = PRIMARY3, 0, 0, 0, 0, 0, 0, 0
R99ContextConfig = SECONDARY1, 0, 0, 0, 0, 0, 0, 0

# 
# The TTFTInfo TFT filters for this test step
# The following entry corresponds to values assigned by the method DefaultPacketFilter1
TFTfilter = 	0, 1, 0.0.0.0.0.0.0.0.0.0.255.255.1.1.1.1, 0.0.0.0.0.0.0.0.0.0.255.255.255.255.255.255, 1, 1, 1, 1, 1, 1, 1, 1
# The following entry corresponds to values assigned by the method DefaultPacketFilter2
TFTfilter = 	1, 2, 0.0.0.0.0.0.0.0.0.0.255.255.1.1.1.1, 0.0.0.0.0.0.0.0.0.0.255.255.255.255.255.255, 2, 2, 2, 2, 2, 2, 2, 2
# The following entry corresponds to values assigned by the method DefaultPacketFilter3
TFTfilter = 	2, 3, 0.0.0.0.0.0.0.0.0.0.255.255.1.1.1.1, 0.0.0.0.0.0.0.0.0.0.255.255.255.255.255.255, 3, 3, 3, 3, 3, 3, 3, 3

# 
# Configure the context's status to be changed using publish and subscribe
NotifyContextStatusChangeType = PublishSubscribe
# NotifyContextStatusChange <iContextName>, <iDuration>, <iStatus>
# When the value 0 is published to KPSSimtsyPacketContextStatusChange the context will be suspended (status = EStatusSuspended = 5)
NotifyContextStatusChange = PRIMARY1, 0, 5
# When the value 1 is published to KPSSimtsyPacketContextStatusChange the context will be resumed (status = EStatusActive = 3)
NotifyContextStatusChange = PRIMARY1, 0, 3

# 
# QoS profiles for this test step
# The following entries are the requested profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Requested for all 3 contexts
QosProfileReqR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2
QosProfileReqR99 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2

QosProfileReqR5 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileReqR5 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 2, 0x00, 0x00

# The following entries correspond to the values assigned by the method SecondQoSR99_R4Requested
QosProfileReqR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = PRIMARY3, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1
QosProfileReqR99 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1

QosProfileReqR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5 = PRIMARY3, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileReqR5 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 1, 0x00, 0x00

# The following entries are the negotiated profiles - they are identical and correspond to the values assigned by the method DefaultQoSR99_R4Negotiated for all 3 contexts
QosProfileNegR99 = PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = PRIMARY3, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2
QosProfileNegR99 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2

QosProfileNegR5= PRIMARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = PRIMARY2, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = PRIMARY3, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
QosProfileNegR5 = SECONDARY1, 0x02, 0x02, 0x02, 0x02, 2, 0x02, 0x02, 0x02, 2, 2, 2, 2, 2, 0x00, 0x00
# The following entries correspond to the values assigned by the method SecondQoSR99_R4Negotiated for all 3 contexts
QosProfileNegR99 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1
QosProfileNegR99 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1
QosProfileNegR99 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1

QosProfileNegR5 = PRIMARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileNegR5 = PRIMARY2, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00
QosProfileNegR5 = SECONDARY1, 0x01, 0x01, 0x01, 0x01, 1, 0x01, 0x01, 0x01, 1, 1, 1, 1, 1, 0x00, 0x00


# 
# The InitialiseContext parameters for this test step
# The following entries correspond to the values assigned by the method DefaultTestDataChannel
CommSetup= SIMTSYLOOPBACK.CSY, SIMTSYLOOPBACK::0, 18, 0

