1 // Copyright (c) 1997-2009 Nokia Corporation and/or its subsidiary(-ies). |
|
2 // All rights reserved. |
|
3 // This component and the accompanying materials are made available |
|
4 // under the terms of "Eclipse Public License v1.0" |
|
5 // which accompanies this distribution, and is available |
|
6 // at the URL "http://www.eclipse.org/legal/epl-v10.html". |
|
7 // |
|
8 // Initial Contributors: |
|
9 // Nokia Corporation - initial contribution. |
|
10 // |
|
11 // Contributors: |
|
12 // |
|
13 // Description: |
|
14 // The bytes are all inverted as the T.30 spec indicates that all frame |
|
15 // data should be transmitted from MSB -> LSB ( i.e. left to right just |
|
16 // as printed). However, asynchronous data is always send LSB -> MSB |
|
17 // which would be the wrong way round. Note that in the faxparms.bit |
|
18 // structure the fields are declared in MSB -> LSB order, which is OK. |
|
19 // ID strings are an exception : they are always transmitted completely |
|
20 // backwards (LSB of last byte -> MSB of first byte. |
|
21 // Where the MSB is listed as an x this should be set to 1 if we |
|
22 // received KT30_DIS or left at to 0 if we received a response to our KT30_DIS |
|
23 // We have a mask on incoming data to knock this bit off |
|
24 // |
|
25 // |
|
26 |
|
27 /** |
|
28 @file |
|
29 @internalComponent |
|
30 */ |
|
31 |
|
32 #ifndef __FRAMES_H |
|
33 #define __FRAMES_H |
|
34 /** |
|
35 @internalComponent |
|
36 */ |
|
37 const TUint8 KT30_DISMASK (0xfe); |
|
38 |
|
39 const TUint8 KT30_TCF (0x00); |
|
40 const TUint8 KT30_FILL (0x00); |
|
41 |
|
42 const TUint8 KT30_T1 (35); // this is the T1 35 second timeout |
|
43 const TUint8 KT30_T2 (6); // this is the T2 6 second timeout |
|
44 const TUint8 KT30_T4 (3); // this is the T4 3 second timeout (5.2E/T.30) |
|
45 |
|
46 const TUint8 KT30_ADDR (0xff); // HDLC address is palindromic |
|
47 const TUint8 KT30_CTLNXT (0x03); // intermediate frame control field 11000000 |
|
48 const TUint8 KT30_CTLLST (0x13); // final control field 11001000 |
|
49 |
|
50 const TUint8 KT30_DIS (0x80); // answering capability follows 00000001 |
|
51 const TUint8 KT30_CSI (0x40); // answering station identity follows 00000010 |
|
52 const TUint8 KT30_NSF (0x20); // answering nonstandard facilities 00000100 |
|
53 |
|
54 const TUint8 KT30_DTC (0x81); // polling capability follows 10000001 |
|
55 const TUint8 KT30_CIG (0x41); // polling station identity follows 10000010 |
|
56 const TUint8 KT30_NSC (0x21); // polling nonstandard facilities 10000100 |
|
57 |
|
58 const TUint8 KT30_DCS (0x82); // transmitter capability follows x1000001 |
|
59 const TUint8 KT30_TSI (0x42); // transmitter station identity follows x1000010 |
|
60 const TUint8 KT30_NSS (0x22); // transmitter nonstandard facilities x1000100 |
|
61 |
|
62 const TUint8 KT30_CFR (0x84); // confirmation to received x0100001 |
|
63 const TUint8 KT30_FTT (0x44); // failure to train x0100010 |
|
64 |
|
65 const TUint8 KT30_EOM (0x8e); // end of document x1110001 |
|
66 const TUint8 KT30_MPS (0x4e); // end of page x1110010 |
|
67 const TUint8 KT30_EOP (0x2e); // end of transmission x1110100 |
|
68 const TUint8 KT30_PRIEOM (0x9e); // end of document - operator pls x1111001 |
|
69 const TUint8 KT30_PRIMPS (0x5e); // end of page - operator pls x1111010 |
|
70 const TUint8 KT30_PRIEOP (0x3e); // end of transmission - operator pls x1111100 |
|
71 |
|
72 const TUint8 KT30_MCF (0x8c); // message confirmation x0110001 |
|
73 const TUint8 KT30_RTP (0xcc); // message confirmation with retrain x0110011 |
|
74 const TUint8 KT30_PIP (0xac); // message confirmation - operator pls x0110101 |
|
75 const TUint8 KT30_RTN (0x4c); // message not received with retrain x0110010 |
|
76 const TUint8 KT30_PIN (0x2c); // message not received - operator pls x0110100 |
|
77 |
|
78 const TUint8 KT30_DCN (0xfa); // disconnect x1011111 |
|
79 const TUint8 KT30_CRP (0x1a); // command repeat x1011000 |
|
80 /** |
|
81 @internalComponent |
|
82 */ |
|
83 union faxparms |
|
84 { |
|
85 TUint8 byte[5] ; |
|
86 struct |
|
87 { |
|
88 unsigned b01: 1 ; // transmitter T2 |
|
89 unsigned b02: 1 ; // receiver T2 |
|
90 unsigned b03: 1 ; // T2 IOC |
|
91 unsigned b04: 1 ; // transmitter T3 |
|
92 unsigned b05: 1 ; // receiver T3 |
|
93 unsigned b06: 1 ; // reserved |
|
94 unsigned b07: 1 ; // reserved |
|
95 unsigned b08: 1 ; // reserved |
|
96 |
|
97 unsigned b09: 1 ; // transmitter T4 |
|
98 unsigned b10: 1 ; // receiver T4 |
|
99 unsigned b11: 1 ; // data signalling rate b 1 |
|
100 unsigned b12: 1 ; // data signalling rate b 2 |
|
101 unsigned b13: 1 ; // data signalling rate b 3 |
|
102 unsigned b14: 1 ; // data signalling rate b 4 |
|
103 unsigned b15: 1 ; // fine vertical resolution |
|
104 unsigned b16: 1 ; // two dimensional coding |
|
105 |
|
106 unsigned b17: 1 ; // fax width b 1 |
|
107 unsigned b18: 1 ; // fax width b 2 |
|
108 unsigned b19: 1 ; // fax length b 1 |
|
109 unsigned b20: 1 ; // fax length b 2 |
|
110 unsigned b21: 1 ; // minimum scan line line b 1 |
|
111 unsigned b22: 1 ; // minimum scan line line b 2 |
|
112 unsigned b23: 1 ; // minimum scan line line b 3 |
|
113 unsigned b24: 1 ; // extend field |
|
114 |
|
115 unsigned b25: 1 ; // 2400 bps handshake |
|
116 unsigned b26: 1 ; // uncompressed mode |
|
117 unsigned b27: 1 ; // error correction |
|
118 unsigned b28: 1 ; // frame size 64 octets |
|
119 unsigned b29: 1 ; // error limiting mode |
|
120 unsigned b30: 1 ; // G4 |
|
121 unsigned b31: 1 ; // T6 coding |
|
122 unsigned b32: 1 ; // extend field |
|
123 |
|
124 unsigned b33: 1 ; // validity of width bs 17,18 |
|
125 unsigned b34: 1 ; // width 1216 pels/151mm |
|
126 unsigned b35: 1 ; // width 864 pels/107mm |
|
127 unsigned b36: 1 ; // width 1728 pels/151mm |
|
128 unsigned b37: 1 ; // width 1728 pels/107mm |
|
129 unsigned b38: 1 ; // reserved |
|
130 unsigned b39: 1 ; // reserved |
|
131 unsigned b40: 1 ; // extend |
|
132 } bit ; |
|
133 } ; |
|
134 |
|
135 #endif |
|
136 |
|