--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/telephonyprotocols/rawipnif/src/IPv6Binder.cpp	Tue Feb 02 01:41:59 2010 +0200
@@ -0,0 +1,525 @@
+// Copyright (c) 2006-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+// This file implements the CIPv6Binder class, which handles the transmission
+// of IPv6 data to and from the TCP/IP stack.
+// 
+//
+
+/**
+ @file
+*/
+
+#include <etelpckt.h>
+#include <in_iface.h>
+#include "RawIPFlow.h"
+#include "IPv6Binder.h"
+#include <comms-infras/linkprovision.h>
+
+using namespace ESock;
+#ifdef WCDMA_STUB
+#include <networking/umtsnifcontrolif.h>
+#endif
+
+#define LOG_IP_ADDRESS(desc,addr) _LOG_L2C5(_L8("    " desc " = %d:%d:%d:%d from context"), \
+			addr.u.iAddr32[3], addr.u.iAddr32[2], addr.u.iAddr32[1], addr.u.iAddr32[0]);
+
+CIPv6Binder::CIPv6Binder(CRawIPFlow& aFlow, CBttLogger* aTheLogger)
+/**
+ * Constructor
+ */ 
+	: CBinderBase(aFlow,aTheLogger),
+	  iTheLogger(aTheLogger),
+	  iSpeedMetric(KDefaultSpeedMetric)
+	{
+	}
+
+CIPv6Binder::~CIPv6Binder()
+/**
+ *	Destructor
+ */
+	{
+	}
+
+MLowerDataSender* CIPv6Binder::Bind(MUpperDataReceiver* aUpperReceiver, MUpperControl* aUpperControl)
+/**
+ * Binds TCP/IP protocol to Flow
+ *
+ * @param aUpperReceiver A pointer to Upper layer Receive class
+ * @param aUpperControl A pointer to Upper layer control class
+ */
+	{
+	CBinderBase::Bind(aUpperReceiver, aUpperControl); // Call the superclass's method.
+	return this;
+	}
+
+TInt CIPv6Binder::Control(TUint aLevel, TUint aName, TDes8& /*aOption*/)
+/**
+ * The main function called by the TCP/IP protocol to control the interface.
+ * Can perform a variety of general IP tasks (such as getting IP config)
+ * and "3G" specific tasks (such as deleting the context).
+ *
+ * @param aLevel The level of the interface to control - always KSOLInterface
+ * @param aName The command to perform
+ * @param aOption Data to be input/output as a result of the command
+ * @return Standard error codes
+ */
+	{
+	_LOG_L1C3(_L8("CIPv6Binder::Control [aLevel=%d, aName=%d]"),
+		aLevel, aName);
+
+	if (aLevel == KSOLInterface)
+		{
+		switch (aName)
+			{
+		case KSoIfHardwareAddr:
+			// unsupported because we don't have a h/w address
+			break;
+
+		// 3G-specific configuration commands are below this point.
+#ifdef WCDMA_STUB
+		case KRegisterEventHandler:
+			// Raw IP NIF Events are not supported
+		case KContextSetEvents:
+			// Raw IP NIF Events are not supported
+			break;
+
+		case KContextCreate:
+			// We don't support creating new secondary contexts.
+			break;
+
+		case KContextDelete:
+			// Deletes the primary PDP context. This will shut down the Nif.
+			return DeleteContext(aOption);
+
+		case KContextActivate:
+			// If the IPv6 interface is up, then the context will already have
+			// been activated. So this command should fail with 
+			// KErrAlreadyExists
+			{
+			TUint8* ptr = CONST_CAST(TUint8*, aOption.Ptr()); 
+			TContextParameters* contextParams =
+				REINTERPRET_CAST(TContextParameters*, ptr);
+
+			if (contextParams->iContextInfo.iContextId != 
+				STATIC_CAST(TInt8, GetFlow().GetBcaController()->Nsapi()))
+				{
+				contextParams->iReasonCode = KErrNotFound;
+				}
+			else
+				{
+				contextParams->iContextInfo.iStatus =
+					GetFlow().GetContextStatus();
+				contextParams->iReasonCode = KErrAlreadyExists;
+				}
+			return KErrNone;
+			}
+
+		case KNifSetDefaultQoS:
+		case KContextQoSSet:
+			// Setting the QoS is meaningless over GPRS, so we just return that
+			// we don't support these operations.
+			break;
+
+		case KContextTFTModify:
+			// As we only have one primary context, we don't support anything
+			// to do with traffic flow templates, which are used by secondary
+			// contexts.
+			break;
+
+		case KContextModifyActive:
+			// This command is only valid aftermodifying TFT/QoS parameters. 
+			// As we don't support any of these operations,
+			// this command is never valid.
+			break;
+#endif
+		default:
+			break;
+			}
+		}
+	return KErrNotSupported;
+	}
+
+TInt CIPv6Binder::GetConfig(TBinderConfig& aConfig)
+	{
+    TBinderConfig6* config = TBinderConfig::Cast<TBinderConfig6>(aConfig);
+    
+   	if(config == NULL)
+   		{
+   		return KErrNotSupported;
+   		}
+	
+	config->iFamily = KAfInet6;		/* KAfInet6 - selects TBinderConfig6 */
+
+	config->iInfo.iFeatures = KIfCanBroadcast | KIfCanMulticast;		/* Feature flags */
+	config->iInfo.iMtu = KDefaultMtu;				/* Maximum transmission unit. */
+	config->iInfo.iRMtu = KDefaultMtu;				/* Maximum transmission unit for receiving. */
+	config->iInfo.iSpeedMetric = iSpeedMetric;		/* approximation of the interface speed in Kbps. */
+	
+	TEui64Addr& localId = TEui64Addr::Cast(config->iLocalId);
+	localId = iSettings.iLocalIfId;
+	config->iNameSer1.SetAddress(iSettings.iPrimaryDns);		/* IP primary name server (if any). */
+	config->iNameSer2.SetAddress(iSettings.iSecondaryDns);	/* IP secondary name server (if any). */
+
+	return KErrNone;
+	}
+#ifdef WCDMA_STUB
+
+TInt CIPv6Binder::DeleteContext(TDes8& aContextParameters)
+/**
+ * Deletes a context. As the NIF is responsible for one primary context,
+ * this is equivalent to closing down the NIF.
+ *
+ * @param aContextParameters Parameters of the context to delete
+ * @return KErrArgument if an incorrect structure is passed, otherwise KErrNone
+ */
+	{
+	_LOG_L1C1(_L8("CIPv6Binder::DeleteContext"));
+
+	if (aContextParameters.Length() != sizeof(TContextParameters))
+		{
+		return KErrArgument;
+		}
+
+	TUint8* ptr = CONST_CAST(TUint8*, aContextParameters.Ptr());
+	TContextParameters* params = REINTERPRET_CAST(TContextParameters*, ptr);
+
+	if (params->iContextInfo.iContextId != 
+		STATIC_CAST(TInt8, GetFlow().GetBcaController()->Nsapi()))
+		{
+		params->iReasonCode = KErrBadName;
+		}
+	else
+		{
+		params->iReasonCode = KErrNone; 
+		GetFlow().Stop(KErrNone, MNifIfNotify::EDisconnect);
+		}
+
+	return KErrNone;
+	}
+
+#endif
+
+/**
+ * Called when the context has been activated to set our IP address and get
+ * any other required settings from CommDB.
+ *
+ * @param aConfig The new context config
+ */
+ void CIPv6Binder::UpdateContextConfigL(const TPacketDataConfigBase& aConfig)
+	{
+	_LOG_L1C1(_L8("CIPv6Binder::UpdateContextConfig"));
+
+	// Get our IP address from the GPRS context config.
+	TInetAddr address;
+	
+	TBuf<RPacketContext::KMaxPDPAddressLength> tempAddr;
+	
+	const RPacketContext::TProtocolConfigOptionV2* pco;
+	TInt rel = const_cast<TPacketDataConfigBase&>(aConfig).ExtensionId();
+	if (rel == TPacketDataConfigBase::KConfigGPRS) 
+	    {
+	    tempAddr.Copy(static_cast<const RPacketContext::TContextConfigGPRS&>(aConfig).iPdpAddress);
+	    pco = &static_cast<const RPacketContext::TContextConfigGPRS&>(aConfig).iProtocolConfigOption;
+	    }
+    else
+        {
+        ASSERT(rel == TPacketDataConfigBase::KConfigRel99Rel4 || rel == TPacketDataConfigBase::KConfigRel5);
+	    tempAddr.Copy(static_cast<const RPacketContext::TContextConfigR99_R4&>(aConfig).iPdpAddress);
+	    pco = &static_cast<const RPacketContext::TContextConfigR99_R4&>(aConfig).iProtocolConfigOption;
+        }
+	TInt ret = address.Input(tempAddr);
+
+	// We've got our IP address! Let's save it.
+	if (ret == KErrNone)
+		{
+		const TUint8* addrTable = &address.Ip6Address().u.iAddr8[8];
+		
+		iSettings.iLocalIfId.SetAddr(addrTable, 8);		
+		
+		LOG_IP_ADDRESS("Got local IP address", address.Ip6Address());
+		}
+	else
+		{
+		_LOG_L2C2(_L8("Couldn't get IP address from GPRS config (err: %d)"),
+			ret);
+
+		// Don't leave on this error: we may still be OK if we read some
+		// settings from CommDB.
+		}
+
+	// @todo - is this correct. We can only get the DNS addresses
+	// from the TSY using the iProtocolConfigOption data. Yet a client could
+	// access those DNS config details without knowing about the state of the
+	// iSettings.iGetDnsFromServer flag.
+
+	if ((iSettings.iGetDnsFromServer) ||
+		((iSettings.iPrimaryDns.IsUnspecified()) &&
+		 (iSettings.iSecondaryDns.IsUnspecified())) ) 
+		{
+		TBuf<RPacketContext::KMaxPDPAddressLength> tempAddr;
+		tempAddr.Copy(pco->iDnsAddresses.iPrimaryDns);
+		ret = address.Input(tempAddr);
+
+		if (ret == KErrNone)
+			{
+			iSettings.iPrimaryDns = address.Ip6Address();
+			LOG_IP_ADDRESS("Got primary DNS", iSettings.iPrimaryDns);
+			}
+		else
+			{
+			_LOG_L2C2(_L8("Couldn't get primary DNS address from GPRS config (err: %d)"),
+				ret);
+
+			// Don't leave on this error: we may still be OK if we read some
+			// settings from CommDB.
+			}
+
+		tempAddr.Copy(pco->iDnsAddresses.iSecondaryDns);
+		ret = address.Input(tempAddr);
+
+		if (ret == KErrNone)
+			{
+			iSettings.iSecondaryDns = address.Ip6Address();
+			LOG_IP_ADDRESS("Got secondary DNS", iSettings.iPrimaryDns);
+			}
+		else
+			{
+			_LOG_L2C2(_L8("Couldn't get secondary DNS address from GPRS config (err: %d)"),
+				ret);
+
+			// Don't leave on this error: we may still be OK if we read some
+			// settings from CommDB.
+			}
+		}
+	else
+		{
+		LOG_IP_ADDRESS("Using CommDB DNS address - Primary ", iSettings.iPrimaryDns);
+		LOG_IP_ADDRESS("                         - Secondary ", iSettings.iSecondaryDns);
+		}
+	}
+
+void CIPv6Binder::UpdateConnectionSpeed(TUint aConnectionSpeed)
+/**
+ * Sets the speed metric to return to TCP/IP, based on what the TSY tells us.
+ *
+ * @param aConnectionSpeed Our connection speed
+ */
+	{
+	_LOG_L1C1(_L8("CIPv6Binder::UpdateConnectionSpeed"));
+
+	iSpeedMetric = aConnectionSpeed;
+	}
+
+
+MLowerDataSender::TSendResult CIPv6Binder::Send(RMBufChain& aPdu)
+/**
+ * Called by the protocol to send an outgoing IP packet to the network.
+ *
+ * @param aPdu The outgoing packet
+ * @return Standard error codes
+ */
+	{
+	_LOG_L1C1(_L8("CIPv6Binder::Send"));
+
+#ifdef __BTT_LOGGING__
+	LogPacket(aPdu);
+#endif
+
+	// Return <0: an error occurred
+	// Return  0: no error, but don't send any more packets
+
+	return static_cast<MLowerDataSender::TSendResult>(GetFlow().SendPacket(aPdu, NULL, KIp4FrameType));
+	}
+
+TInt CIPv6Binder::Notification(TAgentToNifEventType /*aEvent*/, 
+	void* /*aInfo*/)
+/**
+ * The Nif will ignore any notification sent
+ *
+ * @param aEvent Not used
+ * @param aInfo Not used 
+ */
+	{
+	_LOG_L1C1(_L8("CIPv6Binder::Notification"));
+
+	return KErrNone;
+	}
+
+void CIPv6Binder::StartSending()
+/**
+ * Indicates to the protocol layer that the NIF is ready to send packets.
+ *
+ * @param aProtocol A pointer to a protocol
+ */
+	{
+	_LOG_L1C1(_L8("CIPv6Binder::StartSending()"));
+
+	CBinderBase::StartSending();
+	}
+
+TBool CIPv6Binder::WantsProtocol(TUint16 aProtocolCode)
+/**
+ * Indicates the type of protocol implemented by this class.
+ *
+ * @param aProtocolCode The protocol type
+ */
+	{
+	_LOG_L1C2(_L8("CIPv6Binder::WantsProtocol [aProtocolCode=%X]"),
+		aProtocolCode);
+
+#ifdef RAWIP_HEADER_APPENDED_TO_PACKETS
+	return ((aProtocolCode & 0x00FF) == KIp6FrameType);
+#else
+	(void) aProtocolCode;
+	return ETrue;
+#endif // RAWIP_HEADER_APPENDED_TO_PACKETS
+	}
+
+void CIPv6Binder::Process(RMBufChain& aPdu)
+/**
+ * Called when an incoming IP packet has arrived. Send packets up to the
+ * TCP/IP stack.
+ *
+ * @param aPdu The incoming packet
+ */
+	{
+	_LOG_L1C1(_L8("CIPv6Binder::Process"));
+
+#ifdef __BTT_LOGGING__
+	LogPacket(aPdu);
+#endif
+
+	// Pass incoming packets up to the protocol, unless it hasn't
+	// been bound yet.
+	if (iUpperReceiver)						// ASSERT(iUpperReceiver) ?
+		{
+		_LOG_L1C1(_L8("CIPv6Binder: Packet Sent to TCP/IP Protocol!!!"));
+		iUpperReceiver->Process(aPdu);
+		}
+	else 
+		{
+		_LOG_L2C1(_L8("WARNING: dumping incoming packet, no protocol bound"));
+		aPdu.Free();
+		}
+	}
+
+//
+// MLowerControl methods
+//
+
+TInt CIPv6Binder::GetName(TDes& aName)
+/**
+*/
+	{
+	WriteIfName(aName);
+	return KErrNone;
+	}
+
+//
+// CBinderBase methods
+//
+
+void CIPv6Binder::SetProvision(const CIPConfig& aProvision)
+/**
+Set provisioning information for IPv6 binder.
+
+Called from RawIP Flow.
+
+@param aProvision Provisioning structure from Control side.
+*/
+	{
+	iSettings.iPrimaryDns = aProvision.GetIp6NameServer1();
+	iSettings.iSecondaryDns	= aProvision.GetIp6NameServer2();
+	iSettings.iGetDnsFromServer = aProvision.GetIp6DNSAddrFromServer();
+
+	// Read whether to get IPv4 address from the server
+	// This is only needed for the integration tests. If it's true then 
+	// the IPv4 address will be used to build up the IPv6 address. 
+	iSettings.iGetIpFromServer = aProvision.GetIpAddrFromServer();
+	
+	if (iSettings.iGetIpFromServer == EFalse)
+		{
+		// Sets the IPv6 Link-local address from IpAddr.
+		// LocalId is derived from IpAddr and it's further used to set the Link-local
+		// address elsewhere by adding a prefix (FE80::) in front.
+		// For IpAddr: 192.168.1.1, link-local address will be FE80::C0A8:101.		
+		TUint32 ipAddr = aProvision.GetIpAddress();
+		const TUint8 constantId[8] = { 0, 0, 0, 0, 
+									ipAddr >> 24, (ipAddr >> 16) & 0xFF, 
+									(ipAddr >> 8) & 0xFF, ipAddr & 0xFF }; 
+		iSettings.iLocalIfId.SetAddr(constantId, sizeof (constantId));
+		}
+	else
+		{	
+		//
+		// Use the 64 bit id of MARM machines as our interface id
+		//
+		TMachineInfoV1Buf machineInfo;	
+		UserHal::MachineInfo(machineInfo);
+		iSettings.iLocalIfId.SetAddr(machineInfo().iMachineUniqueId);
+		iSettings.iLocalIfId.SetUniversalBit(0);
+		//
+		// In WINS environment the id is zero which is no-no
+		//
+		if (iSettings.iLocalIfId.IsZero())
+			{
+				iSettings.iLocalIfId.SetAddrRandomNZ();
+			}		
+		}
+	}
+
+#ifdef __BTT_LOGGING__
+void CIPv6Binder::LogPacket(const RMBufChain& aPacket)
+/**
+* Logs packet information into log file.
+*
+* @param aPacket The packet 
+*/
+	{
+	_LOG_L1C1(_L8("CIPv6Binder::LogPacket"));
+
+	TInt mBufLength = aPacket.Length() - aPacket.First()->Length();
+
+	_LOG_L3C2(_L8("Analysis of %d byte packet:"), mBufLength);
+
+	//Note: All the constants used on this method are a pragmatic guess of the
+	//IP header fields. The only porpose of this method is logging.
+
+	if (mBufLength < 40)
+		{
+		_LOG_L3C2(_L8(" -doesn't appear to be a valid IPv6 packet (length=%d)")
+			, mBufLength);
+		return;
+		}
+
+	// Get a pointer to the packet's payload.
+	const TUint8* payloadPtr = aPacket.First()->Next()->Ptr();
+
+	if ((payloadPtr[0] & 0xF0) != 0x60)
+		{
+		_LOG_L3C2(_L8(" - doesn't appear to be an IPv6 packet (version=0x%X)"),
+			(payloadPtr[0] & 0xF0) >> 4);
+		return;
+		}
+
+	_LOG_L3C2(_L8(" - traffic class: 0x%X"), 
+					((payloadPtr[0] & 0xF) << 4) | ((payloadPtr[1] & 0xF0) >> 4));
+	_LOG_L3C2(_L8(" - flow label: 0x%X"), 
+					((payloadPtr[1] & 0x0F) << 16) | (payloadPtr[2] << 8) | payloadPtr[3]);
+	_LOG_L3C2(_L8(" - payload length: 0x%X"), 
+					(payloadPtr[4] << 16) | payloadPtr[5]);
+	_LOG_L3C2(_L8(" - next header: 0x%08X"), payloadPtr[6]);
+	_LOG_L3C2(_L8(" - hop limit: 0x%08X"), payloadPtr[7]);
+	}
+#endif // __BTT_LOGGING__