--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/wapstack/wapmessageapi/inc/wapmessage.h Tue Apr 20 17:00:49 2010 +0100
@@ -0,0 +1,902 @@
+// Copyright (c) 2001-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+//
+
+#ifndef __WAPMESSAGE_H__
+#define __WAPMESSAGE_H__
+
+
+#include <e32base.h>
+#include <e32std.h>
+#include <in_sock.h>
+#include <nifman.h>
+#include <in_iface.h>
+
+/**
+* @file
+*
+* The WAP Messaging API.
+*
+* Four interfaces are defined that provide bound and fully-specified versions of WDP and Connectionless Push.
+* An instantiation of each may be obtained using the CreateImplementationL() function, and must be released
+* using Release() when no longer required. Release() causes the instantiation to be deleted.
+*
+* For error codes returned by methods in this API, see <wapmsgerr.h>. Most methods can return a set of general
+* errors, with some returning additional specific errors.
+*
+* @publishedAll
+* @released since v7.0
+*/
+
+/**
+* Defines WAP-related types and error codes.
+*/
+namespace Wap
+ {
+ // Bearer type definition
+ typedef enum
+ /** Type definition for an enum defining WAP bearer types. */
+ {
+ /** All bearers. */
+ EAll,
+ /** Internet Protocol. */
+ EIP,
+ /** 7-bit SMS. */
+ ESMS7,
+ /** 8-bit SMS. */
+ ESMS,
+ /** 7-bit SMS. The bearers WAPSMS and WAPSMS7 are intended for WAP browsing where
+ delivery reports are not required and the validity period is much shorter (5 minutes). */
+ EWAPSMS7,
+ /** 8-bit SMS. */
+ EWAPSMS
+ } TBearer;
+
+ // Port number definition
+ /** A port number. */
+ typedef TUint16 TPort;
+
+ class TAddressInfo
+ /** Encapsulates an interface name and address. */
+ {
+ public:
+ /** Interface name. */
+ TName iName;
+ /** Interface IP address. */
+ TInetAddr iAddress;
+ };
+ }
+
+
+/**
+* The WSP status type definition.
+* @internalComponent
+*/
+typedef TUint8 TWSPStatus;
+
+/** Bound WDP */
+class CWapBoundDatagramService : public CBase
+/**
+* Sends and receives datagrams over WDP using a specified local port.
+*
+* The class is an ECom plug-in interface. Clients use NewL() to request an implementation
+* of the interface, and then call the interface's virtual functions to access
+* the implementation's services.
+*
+* The use of the plug-in architecture allows different implementations to use
+* different underlying WAP stacks.
+*
+* Functions can return system wide error codes, and also API-specific errors
+* as defined in wapmsgerr.h.
+*
+*/
+ {
+public: // creation/deletion
+ IMPORT_C static CWapBoundDatagramService* NewL();
+ IMPORT_C static CWapBoundDatagramService* NewL(const TUid& aImplementation);
+ IMPORT_C virtual ~CWapBoundDatagramService();
+
+public: // API methods
+
+ /**
+ * Connects to the WAP stack, opening an endpoint that can be used to listen for
+ * subsequent incoming datagrams.
+ *
+ * This overload of Connect() allows an IP address associated with a network
+ * interface to be specified. In multihomed systems, this can be used to specify
+ * the network interface to which the endpoint should be bound.
+ *
+ * All CWapBoundDatagramService implementations must automatically close this
+ * endpoint upon destruction.
+ *
+ * @param aBearer The bearer to listen on. Use EAll to specify all bearers.
+ * @param aPort The port to listen on. If set to 0, a local port will be chosen
+ * for the client's first SendTo()
+ * @param aInetAddr The IP address of the network interface that should be used
+ * in a multihomed system.
+ * @return KErrNone on successful completion, or one of the system error codes
+ * on failure.
+ */
+ virtual TInt Connect(Wap::TBearer aBearer, Wap::TPort aPort,TInetAddr aInetAddr)=0;
+
+ /**
+ * Connects to the WAP stack, opening an endpoint that can be used to listen for
+ * subsequent incoming datagrams.
+ *
+ * All CWapBoundDatagramService implementations must automatically close this
+ * endpoint upon destruction.
+ *
+ * @param aBearer The bearer to listen on. Use EAll to specify all bearers.
+ * @param aPort The port to listen on. If set to 0, a local port will be chosen
+ * for the client's first SendTo()
+ * @return KErrNone on successful completion, or one of the system error codes
+ * on failure.
+ */
+ virtual TInt Connect(Wap::TBearer aBearer,Wap::TPort aPort)=0;
+
+ /** Sends data to a remote endpoint.
+ *
+ * @param aRemoteHost The address of the remote host to which to send the data.
+ * The format of the address is bearer-specific.
+ * @param aRemotePort The port on the remote host to which the data will be sent
+ * @param aBuffer The data buffer to be sent
+ * @param aBearer The bearer to be used, if the bound connection was opened with EAll
+ * @return KErrNone on successful completion, or one of the system error codes
+ * on failure.
+ */
+virtual TInt SendTo(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, const TDesC8& aBuffer, Wap::TBearer aBearer)=0;
+
+ /**
+ * Waits for a datagram to be received, and discovers the size of buffer required
+ * to retrieve it.
+ *
+ * This asynchronous method waits for a datagram to be received and will then
+ * complete allowing the client to discover how large a buffer is needed to retrieve
+ * the entire datagram that has been received. A later call to RecvFrom() with
+ * a buffer of sufficient size will then allow the client to retrieve the datagram
+ * fully.
+ *
+ * @param aDataSizePckg On completion, the size of data received, in bytes
+ * @param aReqStatus Asynchonrous status word, used to signal when a data size is known
+ * @return KErrNone on successful completion, or one of the system error codes
+ * on failure.
+ */
+ virtual TInt AwaitRecvDataSize(TPckg<TUint16>& aDataSizePckg, TRequestStatus& aReqStatus)=0;
+
+ /**
+ * Receives data on a bound port.
+ *
+ * An asynchronous notification is sent to the client when data arrives.
+ *
+ * @param aRemoteHost On completion, the bearer-dependent address of the remote
+ * host from which the data was received
+ * @param aRemotePort On completion, the port on the remote host from which the
+ * data was received
+ * @param aBuffer A client-allocated data buffer that on completion is filled
+ * with data received. Data that overflows the buffer is discarded.
+ * @param aTruncated On completion, indicates whether the received datagram was
+ * truncated to fit in the client's supplied buffer
+ * @param aReqStatus Asynchronous status word, used to notify the client that
+ * a datagram was received
+ * @param aTimeout An optional millisecond time-out which allows a timed read
+ * to be made. If no data is received within the timeout period, the request
+ * completes with KErrTimedOut. If a value of 0 is supplied, the timeout is infinite.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt RecvFrom(TDes8& aRemoteHost, Wap::TPort& aRemotePort, TDes8& aBuffer, TBool& aTruncated,
+ TRequestStatus& aReqStatus, TUint32 aTimeout)=0;
+
+ /**
+ * Cancels a previously asynchronous RecvFrom() or AwaitRecvDataSize() request.
+ *
+ * If a datagram arrives at the local host, it will be discarded.
+ *
+ */
+ virtual void CancelRecv()=0;
+
+ /**
+ * Gets the local port of this endpoint.
+ *
+ * This is useful if the port was chosen automatically.
+ *
+ * @param aPort On return, the port number
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalPort(Wap::TPort& aPort)=0;
+
+ /**
+ * Gets the local address of this endpoint.
+ *
+ * @param aLocalHost On return, the address of the local host. Clients must pass
+ * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
+ * buffer to hold the address, and passes ownership of the buffer to the client.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0;
+
+ /**
+ * Gets the bearer on which a received datagram arrived.
+ *
+ * This is useful when EAll was specified as the bearer in Connect().
+ *
+ * @param aBearer On return, the bearer
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetBearer(Wap::TBearer& aBearer)=0;
+
+ /**
+ * Queries the WDP bearer for its maximum datagram size and its nominal datagram size.
+ *
+ * The nominal size is the size within which a datagram won't have to be split
+ * into smaller individual messages and then re-assembled at the other end.
+ *
+ * The function will fail for a stream connection.
+ *
+ * @param aMaxSize On return, the maximum datagram size
+ * @param aNominalSize On return, the nominal datagram size
+ * @return KErrNone on successful completion, or one of the system error codes
+ * on failure.
+ */
+ virtual TInt GetDatagramSizes(TUint16& aMaxSize, TUint16& aNominalSize)=0;
+
+protected: // methods
+ IMPORT_C CWapBoundDatagramService();
+ IMPORT_C void ConstructL();
+
+private: // attributes
+ // D'tor Key identification required for ECOM
+ TUid iDtor_ID_Key;
+ };
+
+/** Fully-Specified WDP
+*/
+class CWapFullySpecDatagramService : public CBase
+/**
+* Sends and receives datagrams over WDP using a specified local port and a single,
+* named remote host.
+*
+* The class is an ECom plug-in interface. Clients use NewL() to request an implementation
+* of the interface, and then call the interface's virtual functions to access
+* the implementation's services.
+*
+* The use of the plug-in architecture allows different implementations to use
+* different underlying WAP stacks.
+*
+* Functions can return system wide error codes, and also API-specific errors
+* as defined in wapmsgerr.h.
+*/
+ {
+public: // creation/deletion
+ IMPORT_C static CWapFullySpecDatagramService* NewL();
+ IMPORT_C static CWapFullySpecDatagramService* NewL(const TUid& aImplementation);
+ IMPORT_C virtual ~CWapFullySpecDatagramService();
+
+public: // API methods
+
+ // Connect to the wapstack, opening an endpoint which is to be used only with a single, named remote host.
+ /**
+ * Connects to the WAP stack, opening an endpoint that can be used to listen for
+ * subsequent incoming datagrams.
+ *
+ * This overload of Connect() allows an IP address associated with a network
+ * interface to be specified. In multihomed systems, this can be used to specify
+ * the network interface to which the endpoint should be bound.
+ *
+ * All CWapFullySpecDatagramService implementations must automatically close
+ * this endpoint upon destruction.
+ *
+ * @param aRemoteHost The bearer-dependent address of the remote host with which
+ * the data will be exchanged
+ * @param aRemotePort The port on the remote host to which data will be sent
+ * @param aBearer The bearer to use. EAll cannot be used.
+ * @param aInetAddr The IP address of the network interface that should be used
+ * in a multihomed system.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt Connect(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, Wap::TBearer aBearer, TInetAddr aInetAddr)=0;
+
+ // Connect to the wapstack, opening an endpoint which is to be used only with a single, named remote host.
+ /**
+ * Connects to the WAP stack, opening an endpoint that can be used to listen for
+ * subsequent incoming datagrams.
+ *
+ * All CWapFullySpecDatagramService implementations must automatically close
+ * this endpoint upon destruction.
+ *
+ * @param aRemoteHost The bearer-dependent address of the remote host with which
+ * the data will be exchanged
+ * @param aRemotePort The port on the remote host to which data will be sent
+ * @param aBearer The bearer to use. EAll cannot be used.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt Connect(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, Wap::TBearer aBearer)=0;
+
+ /**
+ * Sends data on a fully-specified connection.
+ *
+ * @param aBuffer The data buffer to be written over the connection
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt Send(const TDesC8& aBuffer)=0;
+
+ /**
+ * Waits for a datagram to be received, and discover how large a buffer is required
+ * to retrieve it.
+ *
+ * This asynchronous request waits for a datagram to be received and will then
+ * complete allowing the client to discover how large a buffer is needed to retrieve
+ * the entire datagram that has been received. A later call to Recv() with a
+ * buffer of sufficent size will then allow the client to retrieve the datagram
+ * fully.
+ *
+ * @param aDataSizePckg On completion, the size of data received, in bytes
+ * @param aReqStatus Asynchonrous status word, used to signal when a data size is known
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt AwaitRecvDataSize(TPckg<TUint16>& aDataSizePckg, TRequestStatus& aReqStatus)=0;
+
+ /**
+ * Receives data on a bound port.
+ *
+ * An asynchronous notification is sent to the client when data arrives.
+ *
+ * @param aBuffer A client-allocated data buffer that, on completion, is filled
+ * with data received. Data that overflows the buffer is discarded.
+ * @param aTruncated On completion, indicates whether the received datagram was
+ * truncated to fit in the client's supplied buffer
+ * @param aReqStatus Asynchronous status word, used to notify the client that
+ * a datagram was received
+ * @param aTimeout An optional millisecond time-out which allows a timed read
+ * to be made. If no data is received within the timeout period, the request
+ * completes with KErrTimedOut. If a value of 0 is supplied, the timeout is infinite.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt Recv(TDes8& aBuffer, TBool& aTruncated, TRequestStatus& aReqStatus, TUint32 aTimeout)=0;
+
+ /**
+ * Cancels a previously asynchronous Recv() or AwaitRecvDataSize() request.
+ *
+ * If a datagram arrives at the local host, it will be discarded.
+ *
+ */
+ virtual void CancelRecv()=0;
+
+ /**
+ * Gets the local port of this endpoint.
+ *
+ * This is useful if the port was chosen automatically.
+ *
+ * @param aPort On return, the port number
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalPort(Wap::TPort& aPort)=0;
+
+ /**
+ * Gets the local address of this endpoint.
+ *
+ * @param aLocalHost On return, the address of the local host. Clients must pass
+ * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
+ * buffer to hold the address, and passes ownership of the buffer to the client.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0;
+
+ /**
+ * Queries the WDP bearer for its maximum datagram size and its nominal datagram size.
+ *
+ * The nominal size is the size within which a datagram won't have to be split
+ * into smaller individual messages and then re-assembled at the other end.
+ *
+ * @param aMaxSize On return, the maximum datagram size
+ * @param aNominalSize On return, the nominal datagram size
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetDatagramSizes(TUint16& aMaxSize, TUint16& aNominalSize)=0;
+
+protected: // methods
+ IMPORT_C CWapFullySpecDatagramService();
+ IMPORT_C void ConstructL();
+
+private: // ECOM
+ // D'tor Key identification required for ECOM
+ TUid iDtor_ID_Key;
+ };
+
+/** Bound Connectionless Push
+*/
+class CWapBoundCLPushService : public CBase
+/**
+* Listens for WAP Push messages from any sender.
+*
+* The class is an ECom plug-in interface. Clients use NewL() to request an implementation
+* of the interface, and then call the interface's virtual functions to access
+* the implementation's services.
+*
+* The use of the plug-in architecture allows different implementations to use
+* different underlying WAP stacks.
+*
+* Functions can return system wide error codes, and also API-specific errors
+* as defined in wapmsgerr.h.
+*
+*/
+{
+public: // creation/deletion
+ IMPORT_C static CWapBoundCLPushService* NewL();
+ IMPORT_C static CWapBoundCLPushService* NewL(const TUid& aImplementation);
+ IMPORT_C virtual ~CWapBoundCLPushService();
+
+public: // API methods
+
+
+ // Opens a socket which is to be used to listen for subsequent incoming Push messages from any sender;
+ // i.e. it has only been 'bound' to the local address
+ /**
+ * Connects to the WAP stack, opening an endpoint that can be used to listen for
+ * Push messages from any sender.
+ *
+ * This overload of Connect() allows an IP address associated with a network
+ * interface to be specified. In multihomed systems, this can be used to specify
+ * the network interface to which the endpoint should be bound.
+ *
+ * All CWapBoundCLPushService implementations must automatically close this endpoint
+ * upon destruction.
+ *
+ * @param aBearer The bearer to listen on. Use EAll to specify all bearers.
+ * @param aPort The port to listen on. If set to 0, a local port will be chosen
+ * for the client's first SendTo()
+ * @param aSecure Security flag to indicate whether WTLS should be used or not
+ * @param aInetAddr The address of the adapter to use
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt Connect(Wap::TBearer aBearer, Wap::TPort aPort, TBool aSecure, TInetAddr aInetAddr)=0;
+
+
+ // Opens a socket which is to be used to listen for subsequent incoming Push messages from any sender;
+ // i.e. it has only been 'bound' to the local address
+ /**
+ * Connects to the WAP stack, opening an endpoint that can be used to listen for
+ * Push messages from any sender.
+ *
+ * All CWapBoundCLPushService implementations must automatically close this endpoint
+ * upon destruction.
+ *
+ * @param aBearer The bearer to listen on. Use EAll to specify all bearers.
+ * @param aPort The port to listen on. If set to 0, a local port will be chosen
+ * for the client's first SendTo()
+ * @param aSecure Security flag to indicate whether WTLS should be used or not
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt Connect(Wap::TBearer aBearer, Wap::TPort aPort, TBool aSecure)=0;
+
+ /**
+ * Requests an asynchronous notification upon arrival of the next push message
+ * on the listening connection.
+ *
+ * The request completes upon receipt of the message, filling the buffers with
+ * as much received data as possible. A return code indicates whether further
+ * data remains. The call must be re-issued for subsequent messages or to receive
+ * remaining data from a previous push message.
+ *
+ * @param aPushHeaders A client-allocated buffer that, on completion, is filled
+ * with the push message's header data
+ * @param aPushBody A client-allocated buffer that, on completion, is filled with
+ * the push message's body data
+ * @param aPushIdPckg On completion, an integer ID that uniquely specifies the
+ * push message
+ * @param aReqStatus Asynchonrous status word, used by the service provider to
+ * notify the client when a push message has arrived.
+ * EMoreData is returned if more pushed data is available.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt AwaitPush(TDes8& aPushHeaders, TDes8& aPushBody, TPckgBuf<TUint8>& aPushIdPckg, TRequestStatus& aReqStatus)=0;
+
+ /**
+ * Cancels a previous push message request.
+ *
+ * If a push message arrives, the client will not be notified.
+ *
+ */
+ virtual void CancelAwaitPush()=0;
+
+ /**
+ * Gets the local port of this endpoint.
+ *
+ * This is useful if the port was chosen automatically.
+ *
+ * @param aPort On return, the port number
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalPort(Wap::TPort& aPort)=0;
+
+ /**
+ * Gets the local address of this endpoint.
+ *
+ * @param aLocalHost On return, the address of the local host. Clients must pass
+ * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
+ * buffer to hold the address, and passes ownership of the buffer to the client.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0;
+
+ /**
+ * Gets the bearer on which a received datagram arrived.
+ *
+ * This is useful when EAll was specified as the bearer in Connect().
+ *
+ * @param aBearer On return, the bearer
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetBearer(Wap::TBearer& aBearer)=0;
+
+ /**
+ * Gets the address of the remote server.
+ *
+ * This function cannot be called when there is an outstanding AwaitPush().
+ *
+ * @param aRemoteHost On return, the address of the remote host. Clients must pass
+ * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
+ * buffer to hold the address, and passes ownership of the buffer to the client.
+ * @return KErrNone on successful completion, KErrNotSupported if not implemented,
+ * or one of the system error codes on failure.
+ */
+ virtual TInt GetServerAddress(HBufC8*& aRemoteHost)=0;
+
+protected: // methods
+ IMPORT_C CWapBoundCLPushService();
+ IMPORT_C void ConstructL();
+
+private: // ECOM
+ // D'tor Key identification required for ECOM
+ TUid iDtor_ID_Key;
+};
+
+/** Fully-Specified Connectionless Push
+*/
+class CWapFullySpecCLPushService : public CBase
+/**
+* Listens for WAP Push messages from a single, named remote host.
+*
+* The class is an ECom plug-in interface. Clients use NewL() to request an implementation
+* of the interface, and then call the interface's virtual functions to access
+* the implementation's services.
+*
+* The use of the plug-in architecture allows different implementations to use
+* different underlying WAP stacks.
+*
+* Functions can return system wide error codes, and also API-specific errors
+* as defined in wapmsgerr.h.
+*/
+{
+public: // creation/deletion
+ IMPORT_C static CWapFullySpecCLPushService* NewL();
+ IMPORT_C static CWapFullySpecCLPushService* NewL(const TUid& aImplementation);
+ IMPORT_C virtual ~CWapFullySpecCLPushService();
+
+public: // API methods
+
+ // Opens a socket which is to be used only with a single, named remote host.
+ /**
+ * Connects to the WAP stack, opening an endpoint that can be used to listen for
+ * Push messages from a specified remote host.
+ *
+ * This overload of Connect() allows an IP address associated with a network
+ * interface to be specified. In multihomed systems, this can be used to specify
+ * the network interface to which the endpoint should be bound.
+ *
+ * All CWapFullySpecCLPushService implementations must automatically close this
+ * endpoint upon destruction.
+ *
+ * @param aRemoteHost The bearer-dependent address of the remote host with which
+ * the data will be exchanged
+ * @param aRemotePort The port on the remote host to which data will be sent
+ * @param aBearer The bearer to listen on. You cannot use EAll.
+ * @param aSecure Security flag to indicate whether WTLS should be used or not
+ * @param aInetAddr The address of the adapter to use
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt Connect(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, Wap::TBearer aBearer, TBool aSecure, TInetAddr aInetAddr)=0;
+
+ // Opens a socket which is to be used only with a single, named remote host.
+ /**
+ * Connects to the WAP stack, opening an endpoint that can be used to listen for
+ * Push messages from a specified remote host.
+ *
+ * All CWapFullySpecCLPushService implementations must automatically close this
+ * endpoint upon destruction.
+ *
+ * @param aRemoteHost The bearer-dependent address of the remote host with which
+ * the data will be exchanged
+ * @param aRemotePort The port on the remote host to which data will be sent
+ * @param aBearer The bearer to listen on. You cannot use EAll.
+ * @param aSecure Security flag to indicate whether WTLS should be used or not
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt Connect(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, Wap::TBearer aBearer, TBool aSecure)=0;
+
+ /**
+ * Requests an asynchronous notification upon arrival of the next push message
+ * on the listening connection.
+ *
+ * The request completes upon receipt of the message, filling the buffers with
+ * as much received data as possible. A return code indicates whether further
+ * data remains. The call must be re-issued for subsequent messages or to receive
+ * remaining data from a previous push message.
+ *
+ * @param aPushHeaders A client-allocated buffer that, on completion, is filled
+ * with the push message's header data
+ * @param aPushBody A client-allocated buffer that, on completion, is filled with
+ * the push message's body data
+ * @param aPushIdPckg On completion, an integer ID that uniquely specifies the
+ * push message
+ * @param aReqStatus Asynchronous status word, used by the service provider to
+ * notify the client when a push message has arrived.
+ * EMoreData is returned if more pushed data is available.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt AwaitPush(TDes8& aPushHeaders, TDes8& aPushBody, TPckgBuf<TUint8>& aPushIdPckg, TRequestStatus& aReqStatus)=0;
+
+ /**
+ * Cancels a previous push message request.
+ *
+ * If a push message arrives, the client will not be notified.
+ *
+ */
+ virtual void CancelAwaitPush()=0;
+
+
+ /**
+ * Gets the local port of this endpoint.
+ *
+ * This is useful if the port was chosen automatically.
+ *
+ * @param aPort On return, the port number
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalPort(Wap::TPort& aPort)=0; // // (out) the port number
+
+
+ /**
+ * Gets the local address of this endpoint.
+ *
+ * @param aLocalHost On return, the address of the local host. Clients must pass
+ * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
+ * buffer to hold the address, and passes ownership of the buffer to the client.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0; // // (out) the address of the local host
+
+protected: // methods
+ IMPORT_C CWapFullySpecCLPushService();
+ IMPORT_C void ConstructL();
+
+private: // ECOM
+ // D'tor Key identification required for ECOM
+ TUid iDtor_ID_Key;
+};
+
+/** Bound Connectionless WSP
+* @released since v8.0
+*/
+class CWapBoundCLWSPService : public CBase
+{
+public: // creation/deletion
+ IMPORT_C static CWapBoundCLWSPService* NewL();
+ IMPORT_C static CWapBoundCLWSPService* NewL(const TUid& aImplementation);
+ IMPORT_C virtual ~CWapBoundCLWSPService();
+
+public: // API methods
+
+ /**
+ * Connects to the WAP stack, opening an endpoint that can be used for S-Unit-MethodInvoke and
+ * S-Unit-MethodResult primitives.
+ *
+ * @param aBearer The bearer to listen on (use EAll for all bearers)
+ * @param aPort The port to listen on. If set to 0, a local port will be chosen for the
+ * client's first MethodInvoke()
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt Connect(Wap::TBearer aBearer,Wap::TPort aPort, TBool aSecure)=0;
+
+ /**
+ * Sends a request to a remote endpoint.
+ *
+ * @param aBearer The bearer to be used, if the bound connection was opened with EAll
+ * @param aRemoteHost The address of the remote host to which to send the request.
+ * The format of the address is bearer-specific.
+ * @param aRemotePort The port on the remote host to which the request will be sent
+ * @param aMethod
+ * @param aURI
+ * @param aReqHeaders
+ * @param aReqBody
+ * @param aTransactionId
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt MethodInvoke(Wap::TBearer aBearer, const TDesC8& aRemoteHost, Wap::TPort aRemotePort, TUint aMethod, const TDesC& aURI, const TDesC8& aReqHeaders, const TDesC8& aReqBody, const TUint8 aTransactionId)=0;
+
+ /**
+ * Waits for a datagram to be received.
+ *
+ * @param aReqHeaders
+ * @param aReqBody
+ * @param aTransactionIdPckg
+ * @param aWspStatus
+ * @param aReqStatus Asynchonrous status word, used to signal when a data size is known
+ * @param aTimeout
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt MethodResult(TDes8& aReqHeaders, TDes8& aReqBody, TPckgBuf<TUint8>& aTransactionIdPckg, TWSPStatus& aWspStatus, TRequestStatus& aReqStatus, TUint32 aTimeout)=0;
+
+ /**
+ * Cancels a previously requested asynchronous MethodResult() notification.
+ *
+ * If a datagram arrives at the local host, it will be discarded.
+ *
+ */
+ virtual void CancelReq()=0;
+
+
+ /**
+ * Gets the local port of this endpoint.
+ *
+ * This is useful if the port was chosen automatically.
+ *
+ * @param aPort On return, the port number
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalPort(Wap::TPort& aPort)=0; // // (out) the port number
+
+ /**
+ * Gets the local address of this endpoint.
+ *
+ * @param aLocalHost On return, the address of the local host. Clients must pass
+ * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
+ * buffer to hold the address, and passes ownership of the buffer to the client.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0; // // (out) the address of the local host
+
+ /**
+ * Gets the bearer on which a received datagram arrived.
+ *
+ * Useful when EAll was specified in Connect()
+ *
+ * @param aBearer On return, the bearer
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetBearer(Wap::TBearer& /*aBearer*/)=0;
+
+ /**
+ * Gets the remote server address.
+ *
+ * @param aServerAddress On return, the address of the remote server. Clients must pass
+ * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
+ * buffer to hold the address, and passes ownership of the buffer to the client.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetServerAddress(HBufC8*& aServerAddress)=0; // // (out) the address of the remote server
+
+protected: // methods
+ IMPORT_C CWapBoundCLWSPService();
+ IMPORT_C void ConstructL();
+
+private: // ECOM
+ // D'tor Key identification required for ECOM
+ TUid iDtor_ID_Key;
+};
+
+/**
+* Fully-Specified Connectionless WSP
+* @released since v8.0
+*/
+class CWapFullySpecCLWSPService : public CBase
+{
+public: // creation/deletion
+ IMPORT_C static CWapFullySpecCLWSPService* NewL();
+ IMPORT_C static CWapFullySpecCLWSPService* NewL(const TUid& aImplementation);
+ IMPORT_C virtual ~CWapFullySpecCLWSPService();
+
+public: // API methods
+
+ // Opens a socket which is to be used only with a single, named remote host.
+ /**
+ * Connects to the WAP stack, opening an endpoint that can be used to listen for
+ * Push messages from a specified remote host.
+ *
+ * All CWapFullySpecCLWSPService implementations must automatically close this
+ * endpoint upon destruction.
+ *
+ * @param aRemoteHost The bearer-dependent address of the remote host with which
+ * the data will be exchanged
+ * @param aRemotePort The port on the remote host to which data will be sent
+ * @param aBearer The bearer to listen on. You cannot use EAll.
+ * @param aSecure Security flag to indicate whether WTLS should be used or not
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt Connect(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, Wap::TBearer aBearer, TBool aSecure)=0;
+
+ /**
+ * Sends a request to a remote endpoint.
+ *
+ * @param aMethod
+ * @param aURI
+ * @param aReqHeaders
+ * @param aReqBody
+ * @param aTransactionId
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt MethodInvoke(TUint aMethod, const TDesC& aURI, const TDesC8& aReqHeaders, const TDesC8& aReqBody, TUint8 aTransactionId)=0;
+
+ /**
+ * Waits for a datagram to be received
+ *
+ * @param aReqHeaders
+ * @param aReqBody
+ * @param aTransactionIdPckg
+ * @param aWspStatus
+ * @param aReqStatus Asynchonrous status word, used to signal when a data size is known
+ * @param aTimeout
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt MethodResult(TDes8& aReqHeaders, TDes8& aReqBody, TPckgBuf<TUint8>& aTransactionIdPckg, TWSPStatus& aWspStatus, TRequestStatus& aReqStatus, TUint32 aTimeout)=0;
+
+
+ /**
+ * Cancels a previously-requested MethodResult() notification.
+ *
+ * If a message arrives the client will not be notified.
+ *
+ */
+ virtual void CancelReq()=0;
+
+ /**
+ * Gets the local port of this endpoint.
+ *
+ * This is useful if the port was chosen automatically.
+ *
+ * @param aPort On return, the port number
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalPort(Wap::TPort& aPort)=0; // // (out) the port number
+
+ /**
+ * Gets the local address of this endpoint.
+ *
+ * @param aLocalHost On return, the address of the local host. Clients must pass
+ * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
+ * buffer to hold the address, and passes ownership of the buffer to the client.
+ * @return KErrNone on successful completion, or one of the system error codes on failure.
+ */
+ virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0; // // (out) the address of the local host
+
+protected: // methods
+ IMPORT_C CWapFullySpecCLWSPService();
+ IMPORT_C void ConstructL();
+
+private: // ECOM
+ // D'tor Key identification required for ECOM
+ TUid iDtor_ID_Key;
+};
+
+
+// Utility class for client/implementation use.
+class CWapMessageUtils : public CBase
+/** Utility functions for use with WAP Messaging. */
+ {
+public:
+ // // Return a list of all the addresses that are available
+ IMPORT_C static TInt GetLocalAddressesL(RArray<Wap::TAddressInfo>& aAddressInfo);
+ };
+
+
+#endif // __WAPMESSAGE_H__