telephonyprotocols/gprsumtsqosprt/inc/guqos_err.h
branchopencode
changeset 24 6638e7f4bd8f
parent 0 3553901f7fa8
--- a/telephonyprotocols/gprsumtsqosprt/inc/guqos_err.h	Mon May 03 13:37:20 2010 +0300
+++ b/telephonyprotocols/gprsumtsqosprt/inc/guqos_err.h	Thu May 06 15:10:38 2010 +0100
@@ -1,88 +1,88 @@
-// Copyright (c) 2007-2009 Nokia Corporation and/or its subsidiary(-ies).
-// All rights reserved.
-// This component and the accompanying materials are made available
-// under the terms of "Eclipse Public License v1.0"
-// which accompanies this distribution, and is available
-// at the URL "http://www.eclipse.org/legal/epl-v10.html".
-//
-// Initial Contributors:
-// Nokia Corporation - initial contribution.
-//
-// Contributors:
-//
-// Description:
-//
-
-#ifndef __GUQOS_ERR_H__
-#define __GUQOS_ERR_H__
-
-/*
- *  PCO Error codes:
- *  In all the cases listed below a common GTP cause code, 
- *  "User authentication failed", see 3GPP TS 29 060 [20],
- *  shall be used in the response message.
- */
-enum TGuQoSReasonCode
-{
-    /*
-     *  Error code No. 1 "Authorization failure of the request"
-     *  This error code indicates that the secondary PDP context request is 
-     *  rejected because the authorizing entity is unable to provide an 
-     *  authorization decision for the binding information.
-     */
-    EGuqosSblpAuthorizationFailureOfRequest = -3062,  
-
-    /* 
-     *  Error code No. 2 "Missing binding information"
-     *  This error code indicates that the secondary PDP context activation or PDP
-     *  context modification request is rejected because the binding information 
-     *  was not included in the request although required.
-     */
-    EGuqosSblpMissingBindingInfo            = -3061,
-
-    /* 
-     *  Error code No. 3 "Invalid binding information"
-     *  This error code indicates that the secondary PDP context activation or PDP 
-     *  context modification request is rejected because the authorizing entity 
-     *  could not be resolved from the binding information.
-     */
-    EGuqosSblpInvalidBindingInfo            = -3060,
-
-    /*
-     *  Error code No. 4 "Binding information not allowed"
-     *  This error code indicates that the secondary PDP context activation or PDP 
-     *  context modification request is rejected because the Go interface is 
-     *  disabled or not supported in the GGSN and hence binding information is not 
-     *  allowed. The error code may also indicate that the PDP context modification 
-     *  is rejected because binding information is not allowed for modification of 
-     *  previously non-authorised PDP context or that the binding information is 
-     *  not allowed when the PDP context is indicated to be used for IMS signaling.
-     */
-	EGuqosSblpBindingInfoNotAllowed         = -3059,
-
-    /*
-     *  Error code No.5 "Authorizing entity temporarily unavailable"
-     *  This error code indicates that the secondary PDP context activation or PDP 
-     *  context modification request is rejected because the authorizing entity 
-     *  indicated by the binding information is temporarily unavailable.
-     */
-    EGuqosSblpAuthorizingEntityTemporarilyUnavailable   = -3058,
-
-    /*  
-     *  Error code No. 6 "No corresponding session"
-     *  This error code indicates that the secondary PDP context activation request is rejected because the authorizing entity
-     *  cannot associate the Authorisation token of binding information with any ongoing session or binding information
-     *  contains invalid flow identifier(s).The error code also indicates that the PDP context modification request is rejected by
-     *  the authorizing entity because the authorization token has changed or the binding information contains invalid flow
-     *  identifier(s).
-     */
-	EGuqosSblpNoCorrespondingSession        = -3057,
-
-    /*
-     *  Error code No. 7 "Invalid bundling"
-     *  This error code indicates that the secondary PDP context activation or PDP context modification request is rejected
-     *  because the authorizing entity does not allow the grouping of the flow identifiers in the same PDP Context.
-     */
-	EGuqosSblpInvalidBundling	            = -3056
-};
-#endif // __GUQOS_ERR_H__
+// Copyright (c) 2007-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+//
+
+#ifndef __GUQOS_ERR_H__
+#define __GUQOS_ERR_H__
+
+/*
+ *  PCO Error codes:
+ *  In all the cases listed below a common GTP cause code, 
+ *  "User authentication failed", see 3GPP TS 29 060 [20],
+ *  shall be used in the response message.
+ */
+enum TGuQoSReasonCode
+{
+    /*
+     *  Error code No. 1 "Authorization failure of the request"
+     *  This error code indicates that the secondary PDP context request is 
+     *  rejected because the authorizing entity is unable to provide an 
+     *  authorization decision for the binding information.
+     */
+    EGuqosSblpAuthorizationFailureOfRequest = -3062,  
+
+    /* 
+     *  Error code No. 2 "Missing binding information"
+     *  This error code indicates that the secondary PDP context activation or PDP
+     *  context modification request is rejected because the binding information 
+     *  was not included in the request although required.
+     */
+    EGuqosSblpMissingBindingInfo            = -3061,
+
+    /* 
+     *  Error code No. 3 "Invalid binding information"
+     *  This error code indicates that the secondary PDP context activation or PDP 
+     *  context modification request is rejected because the authorizing entity 
+     *  could not be resolved from the binding information.
+     */
+    EGuqosSblpInvalidBindingInfo            = -3060,
+
+    /*
+     *  Error code No. 4 "Binding information not allowed"
+     *  This error code indicates that the secondary PDP context activation or PDP 
+     *  context modification request is rejected because the Go interface is 
+     *  disabled or not supported in the GGSN and hence binding information is not 
+     *  allowed. The error code may also indicate that the PDP context modification 
+     *  is rejected because binding information is not allowed for modification of 
+     *  previously non-authorised PDP context or that the binding information is 
+     *  not allowed when the PDP context is indicated to be used for IMS signaling.
+     */
+	EGuqosSblpBindingInfoNotAllowed         = -3059,
+
+    /*
+     *  Error code No.5 "Authorizing entity temporarily unavailable"
+     *  This error code indicates that the secondary PDP context activation or PDP 
+     *  context modification request is rejected because the authorizing entity 
+     *  indicated by the binding information is temporarily unavailable.
+     */
+    EGuqosSblpAuthorizingEntityTemporarilyUnavailable   = -3058,
+
+    /*  
+     *  Error code No. 6 "No corresponding session"
+     *  This error code indicates that the secondary PDP context activation request is rejected because the authorizing entity
+     *  cannot associate the Authorisation token of binding information with any ongoing session or binding information
+     *  contains invalid flow identifier(s).The error code also indicates that the PDP context modification request is rejected by
+     *  the authorizing entity because the authorization token has changed or the binding information contains invalid flow
+     *  identifier(s).
+     */
+	EGuqosSblpNoCorrespondingSession        = -3057,
+
+    /*
+     *  Error code No. 7 "Invalid bundling"
+     *  This error code indicates that the secondary PDP context activation or PDP context modification request is rejected
+     *  because the authorizing entity does not allow the grouping of the flow identifiers in the same PDP Context.
+     */
+	EGuqosSblpInvalidBundling	            = -3056
+};
+#endif // __GUQOS_ERR_H__