telephonyprotocols/pdplayer/umts/test/te_spudNetworkSide/scripts/te_pdplayer_ip6.script
// Copyright (c) 2010 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
// IPv6 integration tests of network-initiated conditions.
// NOTE: this test suite is the same as te_spudnetworkside, in that it runs the same tests
// however all tests run with an IPv6 configuration. May seem like overkill however
// as the flow is created before activation, its important to make sure that it
// is cleaned up properly in the event of an error.
//! @file te_pdplayer_ip6.script
RUN_UTILS MkDir c:\simtsy\
RUN_UTILS MkDir c:\private\
RUN_UTILS MkDir c:\private\101F7989\
RUN_UTILS MkDir c:\private\101F7989\esock\
RUN_UTILS MakeReadWrite c:\simtsy\config.txt
RUN_UTILS MakeReadWrite c:\config.txt
RUN_UTILS MakeReadWrite c:\loopback.ini
RUN_UTILS DeleteFile c:\simtsy\config.txt
RUN_UTILS DeleteFile c:\config.txt
RUN_UTILS DeleteFile c:\loopback.ini
RUN_UTILS CopyFile z:\testdata\configs\te_pdplayer_ip6_simtsy_config.txt c:\simtsy\config.txt
RUN_UTILS CopyFile z:\TestData\Configs\te_pdplayer_ip6_simtsy_config.txt c:\config.txt
RUN_UTILS CopyFile z:\TestData\Configs\te_pdplayer_ip6_loopbackcsy.ini c:\loopback.ini
// Configure CommDB for the tests
run_script z:\testdata\scripts\te_esock_test_unloadesockforced.script
ced -i z:\testdata\configs\te_pdplayer_ip6.cfg
run_script z:\testdata\scripts\te_esock_test_loadesock.script
LOAD_SUITE te_spudnetworkside
// TestSection suffix numbers correspond to SIM TSY's test section numbers. i.e. PrimaryActivationFails201 uses SIM TSYs test201
//
// Sanity check tests: before testing the error cases, we test the success cases to make sure the system is OK.
//
START_TESTCASE CBS-PDPLAYER-IP6-0001
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0001
//! @SYMTestCaseDesc Sanity check: successfully activate Primary context.
//! @SYMFssID PDP Layer / Primary PDP Context Creation
//! @SYMTestActions Explicitly Start() a socket. SIM TSY, etc successfully activate the primary context.
//! @SYMTestExpectedResults Primary PDP context is activated: RConnection::Start on SPUD returns KErrNone.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 60 te_spudnetworkside CSpudPrimary z:\testdata\configs\te_pdplayer_ip6.ini PrimaryActivationOk1
DELAY 3000
RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
END_TESTCASE CBS-PDPLAYER-IP6-0001
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0002
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0002
//! @SYMTestCaseDesc Sanity check: successfully activate Secondary context.
//! @SYMFssID PDP Layer / Secondary PDP Context Creation
//! @SYMTestActions Implicitly Start() a socket bound to its secondary context. Set QoS on the socket, prompting GUQoS to activate secondary context.
//! @SYMTestExpectedResults Both the primary & secondary contexts are activated. EQoSEventAddPolicy and EQoSEventConfirm are received by the test app.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
//RUN_TEST_STEP 60 te_spudnetworkside CSpudSecondary z:\testdata\configs\te_pdplayer_ip6.ini SecondaryActivationOk1
//DELAY 3000
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//END_TESTCASE CBS-PDPLAYER-IP6-0002
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
//
// Operation errors: Creation, TFT, QoS, Activation, Deactivation, Deletion errors.
//
START_TESTCASE CBS-PDPLAYER-IP6-0003
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0003
//! @SYMTestCaseDesc Activation of Primary fails.
//! @SYMFssID PDP Layer / Primary PDP Context Creation
//! @SYMTestActions Explicitly start Spud. SIM TSY returns an error on activation of the primary context.
//! @SYMTestExpectedResults Spud cannot be started: RConnection::Start returns an error.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 60 te_spudnetworkside CSpudPrimary z:\testdata\configs\te_pdplayer_ip6.ini PrimaryActivationFails201
DELAY 3000
RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
END_TESTCASE CBS-PDPLAYER-IP6-0003
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0004
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0004
//! @SYMTestCaseDesc Activation of Secondary fails.
//! @SYMFssID PDP Layer / Secondary PDP Context Creation
//! @SYMTestActions Implicitly start SPUD by opening a socket bound to the secondary context. Set QoS on the socket, prompting GUQoS to activate secondary context. SIM TSY errors secondary context activation request.
//! @SYMTestExpectedResults EQoSEventAddPolicy and EQoSEventFailure are received by the test app.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
//RUN_TEST_STEP 60 te_spudnetworkside CSpudSecondary z:\testdata\configs\te_pdplayer_ip6.ini SecondaryActivationFails301
//DELAY 3000
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//END_TESTCASE CBS-PDPLAYER-IP6-0004
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
START_TESTCASE CBS-PDPLAYER-IP6-0005
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0005
//! @SYMTestCaseDesc Network deletes Activated Primary.
//! @SYMFssID PDP Layer / PDP Context Deactivation
//! @SYMTestActions Activate the primary context only by explicitly starting Spud. After a pause, SIM.TSY deletes the primary context.
//! @SYMTestExpectedResults Spud is started successfully - the RConnection is started with KErrNone. KLinkLayerClosed / KErrDisconnected notification is received by the test app.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 100 te_spudnetworkside CSpudPrimaryEvent z:\testdata\configs\te_pdplayer_ip6.ini PrimaryQoSEventDelete1
DELAY 3000
RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
END_TESTCASE CBS-PDPLAYER-IP6-0005
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
START_TESTCASE CBS-PDPLAYER-IP6-0006
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0006
//! @SYMTestCaseDesc The QoS parameter changes on the Primary PDP Context.
//! @SYMFssID PDP Layer / Network initiated PDP Context Modification
//! @SYMTestActions Explicitly start the SPUD interface to activate the primary context, use sim.tsy to trigger the QoS parameter changes on the Primary PDP Context.
//! @SYMTestExpectedResults SPUD starts successfully. SPUD receives the QoS parameter change event successfully. RConnection times out and returns the error code KErrTimedOut.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 60 te_spudnetworkside CSpudPrimaryEvent z:\testdata\configs\te_pdplayer_ip6.ini ENetworkQoSChangePrimary
DELAY 3000
RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
END_TESTCASE CBS-PDPLAYER-IP6-0006
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
START_TESTCASE CBS-PDPLAYER-IP6-0007
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0007
//! @SYMTestCaseDesc Triggers the Primary PDP Context deletion before the lower NIF is up.
//! @SYMFssID PDP Layer / PDP Context Deactivation
//! @SYMTestActions Explicitly start the SPUD interface to activate the primary context, it fails then deletes the Primary Context.
//! @SYMTestExpectedResults Spud start fails. RConnection::Start returns the error.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 60 te_spudnetworkside CSpudPrimary z:\testdata\configs\te_pdplayer_ip6.ini PrimaryDeleteBeforeLowerNif
DELAY 3000
RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
END_TESTCASE CBS-PDPLAYER-IP6-0007
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0008
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0008
//! @SYMTestCaseDesc Triggers the Secondary PDP Context deletion before the lower NIF is up.
//! @SYMFssID PDP Layer / PDP Context Deactivation
//! @SYMTestActions Activate the primary and the secondary contexts by opening a socket & setting QoS on it,fails to creat the secondary context.
//! @SYMTestExpectedResults EQoSEventAddPolicy, EQoSEventFailure are received by the test app.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
//RUN_TEST_STEP 60 te_spudnetworkside CSpudSecondary z:\testdata\configs\te_pdplayer_ip6.ini SecondaryDeleteBeforeLowerNif
//DELAY 3000
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//END_TESTCASE CBS-PDPLAYER-IP6-0008
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
START_TESTCASE CBS-PDPLAYER-IP6-0009
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0009
//! @SYMTestCaseDesc Failure to Start a lower NIF for primary context (LinkLayerDown from lower NIF)
//! @SYMFssID PDP Layer /Primary PDP Context Creation
//! @SYMTestActions Explicitly start SPUD. Spud starts the lower NIF for the primary context. Lower NIF reports LinkLayerDown with an error.
//! @SYMTestExpectedResults Spud start fails. RConnection::Start returns the error.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 120 te_spudnetworkside CSpudPrimary z:\testdata\configs\te_spudnetworkside_platsec.ini PrimaryLowerNifStartFails210
DELAY 3000
RUN_TEST_STEP 30 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
END_TESTCASE CBS-PDPLAYER-IP6-0009
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0010
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0010
//! @SYMTestCaseDesc Failure to Start a lower NIF for secondary context (LinkLayerDown from lower NIF)
//! @SYMFssID PDP Layer /Secondary PDP Context Creation
//! @SYMTestActions Request activation of the secondary PDP context by opening a socket & setting QoS on it. Spud start the lower NIF for the secondary context. Lower NIF reports LinkLayerDown with error.
//! @SYMTestExpectedResults The primary context is activated, secondary is not. EQoSEventAddPolicy and EQoSEventFailure with the error code are received by the test app.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
//RUN_TEST_STEP 60 te_spudnetworkside CSpudSecondary z:\testdata\configs\te_spudnetworkside_platsec.ini SecondaryLowerNifStartFails310
//DELAY 3000
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//END_TESTCASE CBS-PDPLAYER-IP6-0010
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
START_TESTCASE CBS-PDPLAYER-IP6-0011
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0011
//! @SYMTestCaseDesc Test Etel suspension of primary context
//! @SYMFssID PDP Layer /Network initiated PDP Context Modification
//! @SYMTestActions Create/send data on a socket with no QoS parameters (therefore a primary context), and read from the opposite loopback port. Suspend the context. Send more data and attempt to read from the opposite port. Resume the context. Send more data and attempt to read from the opposite port.
//! @SYMTestExpectedResults The read on the loopback comm port should work before the context is suspended, and after it is resumed. It should time-out when the context is suspended.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 120 te_spudnetworkside CSpudSuspendContext z:\testdata\configs\te_pdplayer_ip6.ini PrimaryContextSuspendAndResume
RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
DELAY 3000
END_TESTCASE CBS-PDPLAYER-IP6-0011
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0012
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0012
//! @SYMTestCaseDesc Test Etel suspension of secondary context
//! @SYMFssID PDP Layer /Network initiated PDP Context Modification
//! @SYMTestActions Create/send data on a socket with QoS parameters (therefore a secondary context), and read from the opposite loopback port. Suspend the context. Send more data and attempt to read from the opposite port. Resume the context. Send more data and attempt to read from the opposite port.
//! @SYMTestExpectedResults The read on the loopback comm port should work before the context is suspended, and after it is resumed. It should time-out when the context is suspended.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
//RUN_TEST_STEP 120 te_spudnetworkside CSpudSuspendContext z:\testdata\configs\te_pdplayer_ip6.ini SecondaryContextSuspendAndResume
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//DELAY 3000
//END_TESTCASE CBS-PDPLAYER-IP6-0012
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
START_TESTCASE CBS-PDPLAYER-IP6-0013
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0013
//! @SYMTestCaseDesc Primary PDP context activation fails
//! @SYMFssID PDP Layer /Primary PDP Context Creation
//! @SYMTestActions Primary PDP context activation fails by modifying the TFT values
//! @SYMTestExpectedResults The SpudMan code should respond to this event correctly without Leave and Panic.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 60 te_spudnetworkside CSpudPrimary z:\testdata\configs\te_pdplayer_ip6.ini PrimaryActivationFails18
DELAY 3000
RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
END_TESTCASE CBS-PDPLAYER-IP6-0013
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0014
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0014
//! @SYMTestCaseDesc Secondary PDP context: Setting TFT fails
//! @SYMFssID PDP Layer /Secondary PDP Context Creation
//! @SYMTestActions Setting TFT values on secondary PDP context fails due to using incorrect TFT values
//! @SYMTestExpectedResults The SpudMan code should respond to this event correctly without Leave and Panic.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
//RUN_TEST_STEP 60 te_spudnetworkside CSpudSecondary z:\testdata\configs\te_pdplayer_ip6.ini SecondaryActivationFails19
//DELAY 3000
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//END_TESTCASE CBS-PDPLAYER-IP6-0014
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0015
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0015
//! @SYMTestCaseDesc Secondary PDP context: Setting requested QoS parameters fails
//! @SYMFssID PDP Layer /Secondary PDP Context Creation
//! @SYMTestActions Setting QoS parameters on secondary PDP context fails due to using incorrect QoS parameter values
//! @SYMTestExpectedResults The SpudMan code should respond to this event correctly without Leave and Panic.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
//RUN_TEST_STEP 60 te_spudnetworkside CSpudSecondary z:\testdata\configs\te_pdplayer_ip6.ini SecondaryActivationFails20
//DELAY 3000
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//END_TESTCASE CBS-PDPLAYER-IP6-0015
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
START_TESTCASE CBS-PDPLAYER-IP6-0016
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0016
//! @SYMTestCaseDesc Primary PDP context deletion fails
//! @SYMFssID PDP Layer / PDP Context Deactivation
//! @SYMTestActions Primary PDP context deletion fails by modifying the TFT values
//! @SYMTestExpectedResults The SpudMan code should respond to this event correctly without Leave and Panic.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 60 te_spudnetworkside CSpudPrimary z:\testdata\configs\te_pdplayer_ip6.ini PrimaryDeletionFails21
DELAY 8000
RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
END_TESTCASE CBS-PDPLAYER-IP6-0016
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0017
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0017
//! @SYMTestCaseDesc Secondary PDP context deletion fails
//! @SYMFssID PDP Layer / PDP Context Deactivation
//! @SYMTestActions Secondary PDP context deletion fails by modifying the TFT values
//! @SYMTestExpectedResults The SpudMan code should respond to this event correctly without Leave and Panic.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
//RUN_TEST_STEP 60 te_spudnetworkside CSpudSecondary z:\testdata\configs\te_pdplayer_ip6.ini SecondaryDeletionFails22
//DELAY 8000
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//END_TESTCASE CBS-PDPLAYER-IP6-0017
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0018
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0018
//! @SYMTestCaseDesc Network deletes a primary context
//! @SYMFssID PDP Layer / PDP Context Deactivation
//! @SYMTestActions Starts a secondary context by creating a socket with QoS, starts a rawipnif instance opposite the secondary context, deletes the primary context then sends data on the primary context's socket.
//! @SYMTestExpectedResults Since the primary context is down, the data is sent on the secondary context, and is received by the rawipnif instance opposite the secondary context.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
//RUN_TEST_STEP 600 te_spudnetworkside CSpudDeletePrimary z:\testdata\configs\te_pdplayer_ip6.ini PrimaryQoSEventDeleteWithSecondary
//DELAY 3000
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//END_TESTCASE CBS-PDPLAYER-IP6-0018
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
START_TESTCASE CBS-PDPLAYER-IP6-0019
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0019
//! @SYMTestCaseDesc Call RConnection::Stop while SPUDFSM is initialising the phone
//! @SYMFssId PDP Layer /Secondary PDP Context Creation
//! @SYMTestActions Cause RPhone::Initialise to take a very long time to complete, and call RConnection::Stop while it is running
//! @SYMTestExpectedResults Connection stops successfully.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 120 te_spudnetworkside CSpudPrimayStartingStop z:\testdata\configs\te_pdplayer_ip6.ini PrimarySlowInitialisePhone
DELAY 3000
END_TESTCASE CBS-PDPLAYER-IP6-0019
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
START_TESTCASE CBS-PDPLAYER-IP6-0020
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0020
//! @SYMTestCaseDesc Sanity check: successfully activate many primary contexts.
//! @SYMFssID PDP Layer /Primary PDP Context Creation
//! @SYMTestActions Explicitly start the SPUD interfaces. SIM TSY, etc successfully activate the primary contexts.
//! @SYMTestExpectedResults The Primary PDP contexts are activated, SPUD started: RConnection::Start on the SPUDs returns KErrNone.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 200 te_spudnetworkside CSpudMultiPrimary z:\testdata\configs\te_pdplayer_ip6.ini MultiPrimaryActivationOk1
DELAY 3000
RUN_TEST_STEP 100 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
END_TESTCASE CBS-PDPLAYER-IP6-0020
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0021
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0021
//! @SYMTestCaseDesc Set requested Qos (SSD, IM CN SI) on a Secondary PDP context.
//! @SYMFssID PDP Layer /Secondary PDP Context Creation
//! @SYMTestActions Activate the primary and the secondary contexts by opening a socket & setting requested Qos (SSD = Speech, SI = True, IM CN SI = True) on secondary PDP context
//! @SYMTestExpectedResults Both the primary & secondary contexts are activated. EQoSEventAddPolicy and EQoSEventConfirm are received by the test app.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//RUN_TEST_STEP 60 te_spudnetworkside CSpudQosR5Secondary z:\testdata\configs\te_pdplayer_ip6.ini SecondaryR5ActivationOk1
//DELAY 3000
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//END_TESTCASE CBS-PDPLAYER-IP6-0021
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0022
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0022
//! @SYMTestCaseDesc Secondary PDP context: Setting requested QoS parameters fails
//! @SYMFssID PDP Layer /Secondary PDP Context Creation
//! @SYMTestActions Setting QoS parameters on secondary PDP context fails due to using incorrect QoS parameter values
//! @SYMTestExpectedResults The SpudMan code should respond to this event correctly without Leave and Panic.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//RUN_TEST_STEP 60 te_spudnetworkside CSpudQosR5Secondary z:\testdata\configs\te_pdplayer_ip6.ini SecondaryR5ActivationFails20
//DELAY 3000
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//END_TESTCASE CBS-PDPLAYER-IP6-0022
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
// Uncomment when IPv6 on Secondary PDP contexts is sorted.
//START_TESTCASE CBS-PDPLAYER-IP6-0023
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0023
//! @SYMTestCaseDesc Network deletes a primary context where SI is set on Secondary PDP context.
//! @SYMFssID PDP Layer / PDP Context Deactivation
//! @SYMTestActions Starts a secondary context by creating a socket with QoS, starts a rawipnif instance opposite the secondary context, deletes the primary context then sends data on the primary context's socket.
//! @SYMTestExpectedResults Since the primary context is down, the data is sent on the secondary context, and is received by the rawipnif instance opposite the secondary context.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
//RUN_TEST_STEP 600 te_spudnetworkside CSpudDeletePrimaryR5Qos z:\testdata\configs\te_pdplayer_ip6.ini PrimaryQoSR5EventDeleteWithSecondary
//DELAY 3000
//RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
//END_TESTCASE CBS-PDPLAYER-IP6-0023
//run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
//run_script z:\TestData\scripts\te_esock_test_loadesock.script
START_TESTCASE CBS-PDPLAYER-IP6-0024
//! @SYMTestCaseID CBS-PDPLAYER-IP6-0024
//! @SYMTestCaseDesc Sanity check: Primary context Progress Test
//! @SYMFssID PDP Layer /Primary PDP Context Creation
//! @SYMTestActions Explicitly start the SPUD interface. SIM TSY, etc successfully activate the primary context. Check the Progress.
//! @SYMTestExpectedResults Primary PDP context is activated, SPUD is started: RConnection::Start on SPUD returns KErrNone. Check the Progress of connection.
//! @SYMTestPriority Critical
//! @SYMTestStatus Implemented
//! @SYMTestType CIT
RUN_TEST_STEP 60 te_spudnetworkside CSpudPrimaryContextEventProgress z:\testdata\configs\te_pdplayer_ip6.ini PrimaryActivationOk1
DELAY 3000
RUN_TEST_STEP 60 te_spudnetworkside CESockCheck z:\testdata\configs\te_pdplayer_ip6.ini ESockCheck
END_TESTCASE CBS-PDPLAYER-IP6-0024
run_script z:\TestData\scripts\te_esock_test_unloadesockForced.script
run_script z:\TestData\scripts\te_esock_test_loadesock.script
RUN_UTILS MakeReadWrite c:\simtsy\config.txt
RUN_UTILS MakeReadWrite c:\config.txt
RUN_UTILS DeleteFile c:\simtsy\config.txt
RUN_UTILS DeleteFile c:\config.txt
RUN_UTILS DeleteFile c:\loopback.ini