1 ESOCK E32 Sockets server

     2 

     3 8. Nov 2003.

     4 ============

     5 

     6 ¨ ESock implements the functionality required by a CPM, e.g. meeting rendezvous at 

     7   start-up and supporting the messages required by the framework (see R0). Also

     8   it doesnt shut down automatically but rather on request from the RootServer.

     9 ¨ ESock now supports MBufs for data transfer to protocol SAP implementations 

    10   over the PRT interface (CServProviderBase). The descriptor based Write() and 

    11   GetData() functions are deprecated.

    12 ¨ ESock now understands the BindFrom parameter in .ESK files. Allows a protocol 

    13   configuration to specify its binding below another protocol. This avoids the need 

    14   for it appearing in the upper protocol's configuration file, making such protocols 

    15   more modular. 

    16 ¨ New feature: Datagram Continuation, the ability to read a datagram in parts. With 

    17   PRT v1 when an application reads a datagram using RSocket::recv() ESock calls GetData() 

    18   upon the SAP for the exact amount of data requested by the client. If the datagram is 

    19   bigger than the requested amount the PRT will truncate it and return the  requested amount 

    20   of octets. It is up to the client to know whether the data was truncated. This leads to some 

    21   clients having to maintain absurdly large transfer buffers to cope with out-lier cases. 

    22   With PRTs implementing PRT1.5, ESock calls GetData() with a carefully oversized length 

    23   parameter, with the intent that the SAP delivers the entire datagram RMBufChain. A client 

    24   request to read the datagram which includes a TSockXfrLength parameter, eg  

    25   RSocket::Recv(TDes8& aDesc,TUint flags,TRequestStatus& aStatus,TSockXfrLength& aLen), 

    26   then completes with the remaining unread octets of the datagram in the TSockXfrLength. 

    27   The client can then read the remaining octets by further reads with the  'KSockReadContinuation' 

    28   flag OR'd into the flags field. Remaining octets are discarded upon the next read without the 

    29   KSockReadContinuation flag set.

    30   Notes:

    31     (1) This only works with PRT1.5 protocols.

    32     (2) Clients who do not set the KSockReadContinuation flag experience the original behaviour that overflows are discarded

    33     (3) Clients who need to treat datagrams as a "stream" can always set KSockReadContinuation as in the absence of remaining data a new GetData is performed.

    34 ¨ The MBuf Manager has been moved from ESock/MBufMgr to MBufMgr. All classes previously living 

    35   in the NIFMAN component, implementing extra functionality for MBufs have been moved to the 

    36   new MBufMgr component. Components needing this should link to the mbufmgr.dll library.

    37 ¨ ESock has been split into a client DLL (esock.dll) and a server DLL (esocksvr.dll).

    38 ¨ ESock is now using the Secure IPC framework. E.g. CServer2, RMessage2 and TIpcArgs.

    39 

    40 29. Nov 2001 (alfredh)

    41 ======================

    42 

    43 Defect fixes:

    44 

    45 KUN-54UMKA "CSocket::Ioctl() panics when calling second Ioctl if first one leaves"

    46 

    47 Problem fixed in ssock/ss_sock.cpp - now setting flag 'ioctl block' *after* a

    48 successful memory allocation. This defect was found using SmsStack reg tests.

    49 Verified on WINS and ARM4 (assabet board)

    50 Also increased the stacksize for tcesock.exe to 0x10000 so I could run on assabet.

    51 

    52 

    53 Version 2.1 (651)

    54 ==============

    55 Merged in the changes to the test codes the projects now output logs 

    56 

    57 	- TCESOCK  logs to \epoc32\wins\c\esoctest.txt under wins and on c:\esoctest.txt under thumb

    58 	- TIPC logs to \epoc32\wins\c\ipctest.txt under wins and on c:\ipctest.txt under thumb

    59 	- TSHUT logs to \epoc32\wins\c\tshutest.txt under wins and on c:\tshutest.txt under thumb

    60 

    61 	

    62 

    63 Version 2.0 (650)

    64 =================

    65 

    66 First release onto mainline share. Identical to version 555 on ER5u share.

    67 

    68 Version 1.0 (555)

    69 =================

    70 - Previous fix for (EDNPGAL-4B4GEJ in ER5u) was broken and removed in ESOCK 554. The

    71 correct fix has now been added to this release (ESOCK 555)

    72 

    73 Version 1.0 (554)

    74 =================

    75 

    76 - defect fix for EDNDHAR-4BXLU6 (Web hits a SocketServer USER 47 Panic on receiving data)

    77 in ER5u Defects. Involved removing the so-called defect fix that was put in ESOCK 552, for

    78 "Large TCPIP packets seem to be lost".

    79 

    80 Version 1.0 (553)

    81 =================

    82 

    83 -EPOC Connect was broken by 552 by the omission of the construction of a hard-coded 

    84 ESOCK.INI for the WINC build. This has been rectified.

    85 

    86 

    87 Version 1.0 (552)

    88 =================

    89 

    90 - Minor code changes to eliminate MSVC6 warnings. 

    91 - defect fix for "Large TCPIP packets Seem to be Lost" (EDNPGAL-4B4GEJ in ER5u).

    92 	This fix works for WINS but does not fix the defect on ARM. This is still under

    93 	investigation.

    94 - defect fix for "Need to remove all references to EPOC registry" - (EDNDMAY-49CE4E in ER5u

    95 defects). Removed sections of code which used it (all in WINC build).

    96 - defect fix for "Need to remove calls to deprecated functions" (EDNDMAY-49CDVT in ER5u defects).

    97   Removed two lines which call RThread::SetNotifyIfDie() and RThread::SetMark().

    98 

    99 

   100 

   101 Version 1.0 (550)

   102 =================

   103 

   104 - Split Nifman from Esock.

   105 - Removed all narrow-specific stuff from MNT.CMD and EBLD.BAT.

   106 - Removed narrow def files.

   107 - Did some general tidying up of header files.

   108 

   109 Version 1.0(510)

   110 ================

   111 - Fixed (another) defect in Nifman code for restarting the thread

   112   (ER5 Defect Database EDNKPIA-465MLC)

   113 

   114 Version 1.0(509)

   115 ================

   116 - Changed the Nifman code for restarting the thread

   117 

   118 Version 1.0(508)

   119 ================

   120 - Re systemised the ESock thread

   121 

   122 Version 1.0(507)

   123 ================

   124 - Added EBLD.BAT

   125 - Change in CS_CLI.CPP RSocket::GetOpt

   126 

   127 Version 1.0(506)

   128 ================

   129 - Boilerplated source files

   130 - Changed esock to run as non-system thread

   131 - edit mnt to use evalid.bat for validation

   132 

   133 Version 1.0(505)

   134 ================

   135 -defect fix

   136 Transfer socket failed with an socket openned in passive mode

   137 defect reference: SW1-322

   138 

   139 Version 1.0(504)

   140 ================

   141 - Fixed a defect which meant that debug protocols would not run

   142 with a release ESOCK.

   143 

   144 Version 1.0(503)

   145 ================

   146 - debug/Rel stuff

   147 - Unicode UID, added a ROM directory

   148 

   149 Version 1.0(502)

   150 ================

   151 - VC5

   152 

   153 Version 1.0(501)

   154 ================

   155 - Fixed the handling of UNICODE ini files. 

   156 - This was tested on a RACK.

   157 

   158 Version 1.0(500)

   159 ================

   160 - Finished MAKMAKE stuff including testcode

   161 - Mad proofed the Nif interface

   162 - First release for ER5

   163 

   164 Version 1.0(093)

   165 ================

   166 - Changed ESOCK tom use MAKMAKE

   167 

   168 Version 1.0(92)

   169 ================

   170 - Changed Nifman to depend on the CommDB header file rather than using the

   171   definitions for datbase fields in nifvar.h

   172 - Changed MS CallBack codes to be >1000 rather than -ve as -ve values cannot

   173   be stored in the database

   174 

   175 

   176 Version 1.0(91)

   177 ================

   178 - Fixed a defect in the MBuf code, didn't ulink when removing a buffer

   179   from a chain.

   180 - Changed the Nif Interface for reading descriptors

   181 

   182 

   183 Version 1.0(90)

   184 ================

   185 - Modifications for callback. BC across the ESOCK i/f but not the NifMan

   186   interface, so a new agent is required. I.e. a kipper (Netdial2) which

   187   supports callback.

   188 

   189 

   190 Version 1.0(072)

   191 ================

   192 

   193 - Fixed WINC build because make files did not have the __WINS__ macro in them

   194 

   195 - Added test code for WINC to tcesock.exe

   196 

   197 

   198 Version 1.0(071)

   199 ================

   200 

   201 - MARM debug build is now BC with MARM release as per E32 125.

   202 

   203 - Updated obey files.

   204 

   205 - Incrementeted build number to 071.

   206 

   207 - Made changes to support PLP over TCPIP, i.e. allowing INI file to be 

   208   loaded from the MS Windows in WINC builds.

   209 

   210 - Work around in place of E32 WINC/WINS/WIndows 95 TLS defect by using Windows 

   211   TLS instead of EPOC32 TLS

   212 

   213 Version 1.0 (400)

   214 =================

   215 

   216 - R4 release. Standard set of R4 dependencies.

   217 

   218 - Standardised MNT verbs. Can now build project on a clean drive using 

   219   BLDFROMNOTHING.

   220 

   221 Version 1.0(070)

   222 ================

   223 

   224 ESOCK.DLL is BC with Protea v.100 and beyond (nonunicode)

   225 NIFMAN.DLL is BC with build 066 (nonunicode)

   226 UNICODE ESOCK.DLL and UNICODE NIFMAN.DLL not BC with previous releases

   227 Not SC with previous releases due to changes in TDes8 v.s TDes declarations

   228 

   229 

   230 General changes

   231 - Updated all build scripts to build and get UNICODE components

   232 - Ran all test code in UNICODE on WINS and MARM rom on a rack D

   233 

   234 Changes to NIFMAN.DLL

   235 - Introduced freeze files for UNICODE WINS and MARM

   236 - MNifIfNotify::Authenticate() now takes TDes arguments as oppose to TDes8

   237 - Changed NIFMAN::SetSocketState() to return KErrUnsupported if it is given an 

   238   unrecognised

   239 - CNifAgentBase::Authenticate() now takes TDes arguments as oppose to TDes8

   240 - Changed INI file reading code to interpret ini files with leading FFFE bytes as UNICODE.

   241 

   242 

   243 ESOCK.DLL

   244 - Frozen def file changed for UNICODE WINS and MARM

   245 - RServiceResolver::GetByName() & GetByNumber now take a TDesC argument as oppose to TDes8

   246 - THostName definition changed to TBuf<0x40> rather than TBuf8<0x40>

   247 - TServiceName definition changed to TBuf<0x20> rather than TBuf8<0x20>

   248 - Added wide IPC Read/Write functions to server side

   249 - Changed server side buffer to THostName rather than TBuf8<30> for SetHostName call

   250   There is a potential defect here which limits host name size of only 30 characters

   251 - Changed INI file reading code to interpret ini files with leading FFFE bytes as UNICODE.

   252 - Changed Changed CHostResolvProvdBase and CServiceResolvProvdBase functions to 

   253   use TDes instead of TDes8 declarations

   254 - Had to increase the stack size to pass the nifman tests, so it is now KDefaultStackSize*sizeof(TText)

   255 - Fixed SW1-836 RSocket::Write does not pass flags through on stream sends because of type 'o'

   256 - Fixed SW1-851 Double clean up stack push for protocol family reference

   257 - Added KSocketInternalWriteBit & KSocketInternalReadBit for protected Send/Recv flags

   258 

   259 

   260 Version 1.0(069)

   261 ================

   262 

   263 No source code changes but released with documentation under version control

   264 

   265 

   266 Version 1.0(068)

   267 ================

   268 

   269 ESOCK.DLL is BC with Protea v.100 and beyond

   270 NIFMAN.DLL is BC with build 066

   271 

   272 -Changed version numbers returned by RNif class to be teh same as ESOCK

   273 

   274 -Added functionality to Nif::SetSocketState() to set the ESOCK socket internal

   275 buffer size.  ENifBuffers512 sets the buffers to 512 bytes, ENifBuffers1024 to 1024

   276 and ENifBuffers2048 to 2048.

   277 

   278 -Incremented build number

   279 

   280 Version 1.0(067)

   281 ================

   282 

   283 ESOCK.DLL is BC with Protea v.100 and beyond

   284 NIFMAN.DLL is BC with build 066

   285 

   286 -Fixed SW1-203 'Possible panic if immediate restart after disconnect'

   287 

   288 -Fixed SW1-204 'Stage transition from Uninitialised to Unconnected not picked up by RNifMonitor'

   289 

   290 -Added iState==EDisconnecting __ASSERT_debug to NIFMAN DisconnectComplete() upcall

   291 

   292 

   293 Version 1.0(066)

   294 ================

   295 

   296 ESOCK.DLL is BC with Protea v.100 and beyond

   297 NIFMAN.DLL is BC with build 063 with exception of added functions

   298 

   299 Changes to NIFMAN

   300 

   301 -Added derived class RNifMonitor.  RNifMonitor::Open() opens a session to the NIFMAN

   302 server. It is similar to a RNif session however the corresponding agent is not

   303 loaded nor is it referenced.  The only supported commands for RNifMonitor are:

   304 Progress(), LastProgressError(), ProgressNotification(), CancelProgressNotification().

   305 Other RNif functions will return KErrNotSupported.  These changes are a response

   306 to SW1-195.

   307 

   308 -Changed TPtrC(0,0) default arguments to TPtr() as per SW1-194

   309 

   310 -Changed KNifOptLevel constant declaration from 401 to 0x191 to be consistent with other

   311 hex declarations

   312 

   313 -Added constants KAgentUninitialised=0 and KAgentUnconnected=1 and removed 

   314 KMinAgentProgress=0.  This is all about allowing NIFMAN to give consistant updates

   315 through the RNifMonitor class.  KAgentUninitalised is the default stage whenever

   316 a monitor session connects and there is no agent.  As soon as an agent appears

   317 the stage will change to KAgentUnconnected.  When the agent eventually unloads

   318 the stage will change back to KAgentUinitialised.  These stages are consistient with

   319 NTRAS and NETDIAL agents, plus it means the stage will be updated correctly in the 

   320 final instance.

   321 

   322 -Moved the last progress error variable storage from the agent reference into the

   323 sessions.  This means a session must be active to get a last error.  Calling

   324 LastProgressError() will now clear the last error from the particular session.

   325 

   326 -Made various changes on the NIFMAN server side to support RNifMonitor class.  The

   327 main changes involved ensuring the monitor sessions are updated when agents are born

   328 /killed.

   329 

   330 -Changed RNif client side code to make better code reuse when opening sessions.

   331 

   332 -Added test code for RNifMonitor class and progress update changes.

   333   

   334 

   335 Changes to ESOCK

   336 -Incremented build numbers

   337 

   338 

   339 Version 1.0(065)

   340 ================

   341 

   342 ESOCK.DLL is BC with Protea v.100 and beyond

   343 NIFMAN.DLL is BC with build 063

   344 

   345 Changes to NIFMAN

   346 -A new variable has been added "Timeout\StopIfNoClient".  If this variable is true or

   347 the variable is not found then the interface will be stopped immediately if is is not

   348 yet established and there are no network users, (i.e. internet protocol using socket

   349 server sessions)

   350 

   351 -A new variable has been added "Timeout\\ReconnectIfNoClient".  If this variable is not

   352 found or is false then the reconnect dialog will not be requested if there

   353 are no network users

   354 

   355 Changes to ESOCK

   356 -Incremented build numbers

   357 

   358 

   359 Version 1.0(064)

   360 ================

   361 

   362 ESOCK.DLL is BC with Protea v.100 and beyond

   363 NIFMAN.DLL is BC with build 060 with exception of added functions

   364 

   365 Changes to NIFMAN

   366 -EsWatch thread now creates a reference to the nifman library in its

   367   entry point.  This avoids exceptions because esock dynamically loads nifman

   368 

   369 -EsWatch now looks at the thread exit type in addition to the logon

   370   completion code

   371 

   372 Changes to ESOCK

   373 -Incremented build numbers

   374 

   375 Version 1.0(063)

   376 ================

   377 

   378 ESOCK.DLL is BC with Protea v.100 and beyond

   379 NIFMAN.DLL is BC with build 060 with exception of added functions

   380 

   381 Changes to NIFMAN

   382 -Added following functions to get progress information and to stop network interfaces

   383   Nif::ProgressL(TNifProgress& aProgress, const TDesC& aName)

   384   Nif::Stop(TAny* aId, CNifIfBase* aIf)

   385   Nif::ProgressL(TNifProgress& aProgress, TAny* aId, CNifIfBase* aIf)

   386 -Added constant KNifOptInterfaceProgress=3, for protocols to implement as a GetOpt

   387 -Added test code as appropriate

   388 

   389 

   390 Changes to ESOCK

   391 -Incremented build number

   392 

   393 Version 1.0(062)

   394 ================

   395 

   396 ESOCK.DLL is BC with Protea v.100 and beyond

   397 NIFMAN.DLL is BC with build 060

   398 

   399 Changes to NIFMAN

   400 -Fixed SW1-137 'Network timeouts don't allow zero seconds'

   401  If 0 is returned from the database the timeout is set to the minumum 1

   402  If any negative number is returned by the database the timeout is infinite

   403  If the database does not support the timeout values the timeout is infinite

   404 

   405 -Fixed SW1-81 'PC.PRT can panic the Socket Server'

   406  If the port number is out of range KErrTooBig is returned

   407 

   408 Changes to ESOCK

   409 -Incremented build number

   410 

   411 

   412 Version 1.0(061)

   413 ================

   414 

   415 ESOCK.DLL is BC with Protea v.100 and beyond

   416 NIFMAN.DLL is BC with build 060

   417 

   418 Changes to NIFMAN

   419 -Changed function name CNifFactory::ConstructL to CNifFactory::InitL, which means its

   420  still BC.  In any case the only project using this function is ETHER802

   421 -Added enumeration ENifSocketCreated for Nif::SetSocketState.  This is BC because

   422  the enumeration maps directly onto appropriate ESOCK internal socket state.

   423 -Added StartC32() function into RNif client side if socket server does not exist

   424 -A thread 'EsWatch' is now started by NIFMAN to monitor ths socket server thread

   425  if the thread suffers an abnormal exit then the C32Exe process is restarted.

   426 -Speeded up the operation of Nif::CheckIniConfig() by only searching for ESOCK.INI

   427  once on the server side

   428 -The mbuf reaper started by NIFMAN will no longer remove the first mbuf pool.

   429 

   430 Changes to ESOCK

   431 -Incremented build number

   432 

   433 Version 1.0(060)

   434 ================

   435 

   436 ESOCK.DLL is BC with Protea v.100 and beyond

   437 NIFMAN.DLL is BC with build 059 with exception of added functions

   438 

   439 Changes to NIFMAN

   440 

   441 -Added EXPORT CNifFactory::ConstructL

   442 -Added EXPORT Nif::SetSocketState()

   443 -Incremented build number

   444 -Fixed SW1-97 'Cannot start NetDial twice in quick succession on Series 5'

   445 -Fixed alloc heaven in Nifman::CheckIniConfig function

   446 

   447 Changes to ESOCK

   448 -Moved __UHEAP_MARK & __UHEAP_MARKEND statements in thread creation for debug build

   449 -Now explicitly deleting active scheduler & cleanup trap

   450 -Changed void CResolverProvdBase::SetNotify() to an inline

   451 

   452 Version 1.0(059)

   453 ================

   454 

   455 ESOCK.DLL is BC with Protea v.100 and beyond

   456 NIFMAN.DLL is BC with build 058, but strings requested from agents have changed 

   457 making it incompatible with TCPIP 026.

   458 

   459 

   460 Changes to NIFMAN

   461 

   462 -Added following Functions to NIFMAN

   463     Nifman::CheckIniConfig() - External function will ensure the ESOCK.INI file has been parsed

   464 	Nif::IsProtocolLoaded() - NIFMAN internal function to determine if named protocol is loaded

   465 	Nif::CheckInstalledL() - NIFMAN internal function to check nifman is installed

   466 	Nif::CheckInstallMBufManager() - internal function which also checks in ini file for MBuf max heap size

   467 

   468 -Added CMBufPoolReaper class which goes off every 5 seconds to recover mbuf manager heap

   469 -Standardised all NIFVAR.H variables to have correct prefixes

   470 -Changed 'ShortTimeout' to 'Timeout\\Client'

   471 -Changed 'LongTimeout' to 'Timeout\\Route'

   472  

   473 

   474 

   475 Changes to ESOCK

   476 -Incremented build number

   477 -Added friend class CMBufPoolReaper to RMBufQ

   478 -Added friend class CMBufPoolReaper & Nif to CMBufManager

   479 -Removed inline C'tor from CMBufManager

   480 -Changed CMBufManager data variables from protected back to private

   481 -Added friend class Nif to CProtocolRef

   482 -Changed CESockIniData data members from private to protected

   483 -Fixed SW1-68 'OOM Access violation' as suggested

   484 -Fixed SW1-69 'Unchecked return value' as suggested

   485 -Fixed SW1-42 'Inconsistent asserts' as suggested

   486 -Fixed SW1-43 'ESock Fault after calling connect' as suggested

   487 -Removed bogus assert from CProtocolBase d'tor

   488 

   489 

   490 

   491 Version 1.0(058)

   492 ================

   493 

   494 ESOCK.DLL is BC with Protea V.100 and beyond

   495 

   496 New Component

   497 -Moved NIFMAN.DLL from TCPIP into ESOCK & redesigned NIFMAN.DLL to cope with

   498 multiple agents/nifs

   499 -Added 3 test modules IDUMMY.NIF, ADUMMY.AGT & TNIFMAN.EXE.

   500 -Changed PDUMMY.PRT to include nifman tests

   501 

   502 Note new nifman will only work with TCPIP 026 and beyond

   503 

   504 Changes to ESOCK (i.e. changes affecting Protea ROM)

   505 -Added inline accessor for CProtocolBase::iRefCount - 'CProtocolBase::RefCount() const'

   506 -Added KUidEsockExtension = 0x10000387 to ES_PROT.H

   507 -Incremented build number

   508 -Added inline C'tor for CMBufManager

   509 -Changed data variables access for CMBufManager from private to protected

   510 -Fixed SW3-1616 'RMBufChain::TrimEnd() does not deal with an offset of zero correctly'

   511 -Fixed SW1-183 'Possible orphaning of library handle under OOM when loading extension module'

   512 -Fixed SW1-384 'Possible exception under OOM caused by prematurely unloaded library/partially constructed object'

   513 -Commented out various __ASSERT_debug's SS_SOCK.CPP lines 1332 & 1579 to enable TCPIPs

   514     half close mechanism to work properly

   515 -Added inline accessor to CSocketScheduler::iGlobals - 'CSocketScheduler::Globals()'

   516 -Fixed SW1-383 'Possible OOM exception because 'new' should be 'new (ELeave)'

   517 

   518 Other

   519 -IPC.PRT is now included in the ESOCK releasables.

   520 -Given CIpcProtocolHolder::GetNextFreePort TInt return type to eliminate warning

   521 

   522 

   523 Version 1.0(057)

   524 ================

   525 BC

   526 

   527 -Fixed SW3-1332 'Potential OOM problem with Socket Server exclusive mode'

   528 -Incremented build number to 057

   529 

   530 

   531 Version 1.0(056)

   532 ================

   533 

   534 -Fixed SW3-1281 Infrared printing can easily kill machine and corrupt files

   535     By increasing the socket server active object priority when it is in exclusive mode.

   536 -Incremented build number to 056

   537 

   538 Version 1.0(055)

   539 ================

   540 

   541 -Fixed SW3-819 MARM ESOCK.DLL released without .map file

   542 -Fixed SW3-783 Two functions declared IMPORT_C but not defined EXPORT_C 

   543     MARM build now has two extra exports

   544 -Fixed SW3-432 ESOCK version numbers incorrect.  They are now 1.0.55

   545 -Fixed SW3-355 ESOCK does not check module Uid2s

   546 -Fixed SW-3775 Socket Server panics itself rather than panicking clients

   547 -Added mnt valid verb

   548 -Added lots more test code

   549 -Removed all .mdp files from archive

   550 -Added mnt bldarmrel verb

   551 

   552 Version 1.0(054)

   553 ================

   554 

   555 -Fixed more problems with TSockXfrLength not being filled in for Send()/Recv()

   556 -Changed call to CArrayFixBase::SetReserveL for E32 release 105

   557 -Fixed some problems with RHostResolver::Next()

   558 

   559 Version 1.0(053)

   560 ================

   561 

   562 -Fixed problem with delta timer resolution by compensating for for lack of rounding

   563    up in CDeltaTimer class when granularity in reduced.  This has enabled a 100% performance 

   564    improvement for IrCOMM.

   565 -Fixed a defect in data length parameter for TCPIP half close.

   566 -Completed implementation for RHostResolver::Next()

   567 

   568 Version 1.0(052)

   569 ================

   570 

   571 -Removed pdummy.prt from release

   572 -Stopped releasing ESOCK.INI files because they are incorrect

   573 -Removed starting of ESOCK in DLL entry point for WINS.

   574 -Changed INIFILE.H to ES_INI.H

   575 -Removed ESOCK_INI_FILE_DIR define from ES_INI.H

   576 -Changed name of class CIniFile to CESockIniData ordinals still in same place

   577 -Providing default argument for CESockIniData::NewL()

   578 -Stripped loads of private data out of CSockIniData class

   579 -Changed exported CESockIniData c'tor from private to protected

   580 	No effect on existing use because no component could have been using it

   581 -Now Building WINC esock.dll with WINS def files.

   582 -Moved #define _MBUF_CHECKS into debug builds only

   583 -RMBufQ::Transfer(...) now private

   584 -Fixed defect in CSocket::ConnectL where check for error state was not taking place

   585 -WINC build will now look in MS Windows registry for INI files - a default is provided

   586 	for ESOCK.INI

   587 -Socket server shut down timer started after family close.  This fixes defect with library 

   588     unloading and latency timer for TCPIP.

   589 -Latency timer set to 15 seconds.

   590 -Added RSocket::Name() which allows obtains system global name for a socket

   591 -Added RSocket::Transfer() which allows a socket to be transfered from one session to 

   592     another by using the socket global name as a reference.  The transfer is like a

   593 	socket creation.  If it fails the socket which is being transfer will remain with

   594 	the original socket.  Success/failure at the originating socket can be checked

   595 	by calling RSocket::Info which will return KErrNone if the transfer failed and 

   596 	KErrBadHandle if it succeeded.

   597 -Fixed problem with Shutdown(EStopOutput) by allowing data to be received if the socket

   598 	is in a shutting down state.  Additionally any call to a send function will now 

   599 	complete with KErrEof if output has been stopped.

   600 -If a socket has been shut down with EStopInput any further calls to a receive function

   601 	will complete with KErrEof.

   602 -Moved creation of CSocket::iAcceptQ into CSocket::ListenL() which avoids possible 

   603     exception because return of 'new' was not checked.

   604 -Removed iIoctlBuf from CSocket because it has no requirement to be persistent

   605 -Changed CSocket::iAcceptQ to a CCirBuf which avoids some OOM problems and truely

   606 	implements a fixed size queue.  A panic is generated if a protocol attempts to

   607 	overfill the accept queue.

   608 -Ready to go with uid check but commented out until all protocols implement it.

   609 -Fixed potential OOM defect where library handle could have been orphaned in

   610 	CProtocolFamilyRef::LoadL().

   611 -Implmented a way of passing Connect/Disconnect data OOM errors to the client instead of

   612 	just ignoring them

   613 

   614 Version 1.0(051)

   615 ================

   616 

   617 Not binary compatible with last release by virtue of the following:

   618 

   619 Removed all redundant package buffers from RSocket class and replaced two

   620     which are used with PckgBufC's.  This cuts the size of a RSocket on the

   621     stack by about 52 bytes.

   622 

   623 Other changes:

   624 

   625 Removed names which are not required by clients from ES_SOCK.H

   626 Removed the constant KSockOptionMaxSize because it is now redundant

   627 Removed the double under score from the start of RSocketServ::SetExclusive mode and 

   628     RSocketServ::ClearExclusive mode.

   629 Added following uids to marm builds:

   630     ESOCK.DLL uid2 0x1000008D uid3 0x10000047

   631     *.PRT uid2 0x1000004A

   632 Added a protocol accessible function, SocketServExt::InstallSchedulerHook(), which 

   633     allows a callback to be put in place of the active scheduler WaitForAnyRequest.

   634     This is primarily intended for use with the WINC version of PLP.

   635 Removed WINC specific scheduler overloading for PLP.  It has now moved to PLP.

   636 

   637 Version 1.0(050)

   638 ================

   639 

   640 Binary Compatible with last release

   641 C32 Upgrade release

   642 

   643 Version 1.0(049)

   644 ================

   645 

   646 Binary Compatible with last release

   647 Fixed defect in CHostResolver::SetHostName() where GetHostName was being called instead.

   648 Removed iBusy assertions in query completion becaus the assertion is invalid if the

   649 	request was cancelled

   650 

   651 Version 1.0(048)

   652 ================

   653 

   654 Binary Compatible with last release

   655 Added following options for GetOpt:

   656 	KSOReadBytesPending - Is passed to the protocol to be filled in with number of bytes

   657 						  which will be read in the next read operation

   658 	KSOUrgentDataOffset - For a stream protocol which supports urgent data this get option

   659 						  is passed on to the protocol to retreive the urgent data offset

   660 	KSOSelectLastError -  For use with the select Ioctl KSockSelectExcept this get option 

   661 						  retreives the last error, on a per socket basis.

   662 Moved TESOCKActivePriority from ES_SOCK.H to ES_PROT.H

   663 Added KNewDataEndofData which when passed to MSocketNotify::NewData indicates that socket

   664 	is in a half closed state and will receive no more data	any subsequent reads will

   665 	complete with KErrEof and length 0.

   666 Removed KIOctlNRead and KIOctlCatMark because they have no function in the sockets API.

   667 

   668 

   669 Version 1.0(047)

   670 ================

   671 

   672 Binary Compatible with last release

   673 Fixed defect in RSocket::Recv() where an invalid address is passed.

   674 Fixed defect in RSocket::GetOpt() where SetOpt was being called instead

   675 Added a socket level select ioctl with similar semantics to BSD, i.e.:

   676 

   677    TPckgBuf<TUint> flags;

   678    flags()=KSockSelectRead | KSockSelectWrite | KSockSelectExcept;

   679    socket.Ioctl(KIOctlSelect, status, &flags, KSOLSocket);

   680    

   681    The Ioctl will complete when any of the flaged conditions are

   682    satisfied.

   683    KSockSelectRead means data is pending, for listening sockets a

   684    connect is pending or a disconnect is pending

   685    KSockSelectWrite means a socket is connected and data can be written

   686    KSockSelectExcept means the socket is in an error state.

   687    

   688    

   689 Version 1.0(046)

   690 ================

   691 

   692 Binary Compatible with last release

   693 Fixed memory leak in CSocket::SetSockOptL

   694 Integrated extension loading code for TCPIP.

   695 

   696 

   697 Version 1.0(045)

   698 ================

   699 Changed RSocket::EStopInOut to RSocket::EImmediate and reordered enums

   700 Fixed defect in stream protocol sends

   701 Fixed defect in Shutdown(RSocket::EStopInOut, ) by clearing subsession handle through a null message

   702 Fixed potential defect in accept if socket has been put in an error state by the protocol

   703 Added asynchronous stop protocol call

   704 Added SetExclusiveMode and ClearExclusiveMode calls to RSocketServ session

   705 Added freeze files

   706 Added WINC build

   707 

   708 Version 1.0(044)

   709 ===============

   710 Fixed memory defect when protocols fail to start

   711 Reduced socket server thread minimum heap to 4K

   712 

   713 

   714 Version 1.0(043)

   715 ===============

   716 Fixed B4 SW-93 Set buffer length defect.

   717 

   718 

   719 Version 1.0(040)

   720 ================

   721 

   722 Updated ESOCK Entry point

   723 Set minor version number to 4.

   724 Fixed "ETwoClose fault from RSocket::Close() if a RSocket::ShutDown() is pending"

   725 B4 Release.

   726 

   727 

   728 Version 1.0(040)

   729 ================

   730 

   731 Version 1.0(039)

   732 ================

   733 

   734 Added class TMBufPktQIter for iterating MBuf packet queues.

   735 

   736 Checked and corrected const handling throughout MBuf classes, where required, additional const

   737 versions of inlines have been added.

   738 

   739 Added RMBufChain::AppendL(TInt aLen). This adds space to the end of a chain.

   740 

   741 Version 1.0(038)

   742 ================

   743 

   744 Removed RSocket::RecvOneOrMoreFrom. Recv from operations are only meaningful on non connection oriented

   745 protocols, OneOrMore behaviour is only meaningful on stream protocols which must, by definition be 

   746 connection oriented.

   747 

   748 All read operations on RSocket now use the buffer's descriptor's max length rather than length.

   749 This makes Revcs specifying an explicit length more meaningful and the API generally  more usable.

   750 

   751 Added RHostResolver::GetHostName(TDes &aName,TRequestStatus &aStatus) so that TCP/IP can take it's

   752 own good time about sorting out exactly who it might be.

   753 

   754 Version 1.0(037)

   755 ================

   756 

   757 Added virtual void CServProviderBase::CancelIoctl(TUint aLevel,TUint aName)=0;

   758 This is called when a client cancels a pending Ioctl. Protocols should not call IoctlComplete

   759 in response to (or indeed after) a CancelIoctl.

   760 

   761 Version 0.1(036)

   762 ================

   763 

   764 CProtocolBase now provides default implementations for most of it's virtual

   765 functions (all except Identify() actually)

   766 This is to cut down code size of protocols as they no longer need to provide stub

   767 functionality for services they do not support.

   768 Default behaviour is as follows:

   769 

   770 InitL(TDesC &aTag) - Do Nothing

   771 StartL(void) - Do Nothing

   772 

   773 BindL(CProtocolBase* protocol, TUint id) - Panic EDoesNotBindBelow

   774 BindToL(CProtocolBase* protocol) - Panic EDoesNotBindAbove

   775 Send(...) - Panic ECantSend

   776 Process(...) - Panic ECantProcess

   777 GetOption(...) - return KErrNotSupported

   778 SetOption(...) - return KErrNotSupported

   779 Error() - Panic EDontMessWithMyHeadManImHavingABadDay

   780 

   781 Implemented IPC stream protocol.

   782 This is a client server connection model, stream

   783 based service. I've implemented it mainly for testing purposes but if anyone needs

   784 reliable stream based IPC it is fully tested release quality code.

   785 IPC.PRT, RSocket::Open(_L("IPC Stream"));

   786 

   787 Added RSocket::SetLocalPort(TUint aPort) and RSocket::GetLocalPort() these provide a 

   788 simpler interface than Bind for protocols which do not fully use a TSockAddr for local

   789 addressing.

   790 

   791 TServerProtocolDesc and TProtocolDesc now follow standard EPOC/32

   792 naming conventions. (i.e. all instance variables are iXxxxXxxx)

   793 

   794 KBufSizeUndefined becomes KSocketBufSizeUndefined

   795 KDefaultBufferSize becomes KSocketDefaultBufferSize

   796 KInternalOptionBit becomes KSocketInternalOptionBit

   797 KStream becomes KSocketMessageSizeIsStream

   798 KUndefined becomes KSocketMessageSizeUndefined

   799 KNoLimit becomes KSocketMessageSizeNoLimit

   800 KNoSecurity becomes KSocketNoSecurity

   801 

   802 TServerProtocolDesc::iLayer has been removed.

   803 

   804 ESOCK now (as much as possible) checks TProtocolDescs which protocols supply.

   805 

   806 Version 0.1(035)

   807 ================

   808 

   809 Added RSocket open by name RSocket::Open(RSocketServ &aServer,const TDesC& aName)

   810 aName should be the protocol name as supplied to RSocketServ::FindProtocol unlike

   811 FindProtocol opening a socket by name does not support wildcard matching.

   812 

   813 RSocket::Close now calls CloseSubSession so you don't get paniced for closing a

   814 socket twice. I don't like this but everyone else seems to think it's the bees knees.

   815 

   816 Version 0.1(034)

   817 ================

   818 

   819 Version 0.1(033)

   820 ================

   821 

   822 Fixed destructor defect on creating NetDatabases under OOM conditions.

   823 

   824 Version 0.1(032)

   825 ================

   826 

   827 Released for E32 069

   828 

   829 Version 0.1(031)

   830 ================

   831 

   832 B-2 Candidate.

   833 

   834 The ini file is now opened using a TFindFile. The socket server searches in 

   835 \System\Data on all drives opening the first esock.ini it finds. Search order is 

   836 defined by the file server.

   837 

   838 Version 0.1(030)

   839 ================

   840 

   841 Changed default path for ini file to \System\Data\esock.ini for all builds.

   842 

   843 Reimplemented RSocket::Shutdown(RSocket::ENormal...);

   844 

   845 Added an optional parameter to MSocketNotify::CanClose.

   846 TDelete aDelete can be set to EDetach which will stop ESOCK auto deleting the socket

   847 service provider when it is closed. This should be used by protocols such as TCP which

   848 need the SSP to linger after the client has exited. Deleteing the SSP then becomes the

   849 protocol's responsibility.

   850 

   851 Made CProtocolBase::Tag and CProtocolBase::StartSending public again. Sorry.

   852  

   853 Version 0.1(029)

   854 ================

   855 

   856 Delayed protocol closure.

   857 Protocols may now replace virtual void CProtocolBase::CloseNow(); which is called when

   858 all clients referencing a protocol have disconnected. In response a protocol must (at some

   859 time later call void CProtocolBase::CanClose() to indicate that the protocol can be deleted.

   860 This is to allow reliable protocols (TCP in particular) to ensure that all data has drained

   861 from the stack before it is deleted. Protocols must not sit in CloseNow synchronously waiting

   862 for data to drain.

   863 Note that after all clients have exited the socket server spends a short time mourning it's

   864 losses (currently 5 mins) and then exits. At this time all protocols will be forcibly unloaded

   865 anyway.

   866 

   867 Version 0.1(028)

   868 ================

   869 

   870 New startup code.

   871 ESOCK now starts a new thread in the comms server process (C32EXE).

   872 All test clients should now start the comm server (StartC32()) before connecting 

   873 to the socket server. There is no longer any need to explicitly start esock. 

   874 This code relies on defect HA-205 being fixed. If you take this release for 066 you must

   875 apply the fix described on notes yourself. Due to defect HA-212 you should also set the 

   876 nocallentrypoint flag for esock.dll in your oby file

   877 

   878 Tidied code.

   879 ProtocolManager class split into 2. If you're missing an API try

   880 looking in SocketServer.

   881 

   882 Version 0.1(027)

   883 ================

   884 

   885 Added RNetDatabase::Cancel RHostresolver::Cancel and RServiceResolver::Cancel().

   886 On the protocol, these call a new pure virtual fn CResolverProvdBase::CancelCurrentoperation().

   887 

   888 Added RMbufQ::Assign(RMbufChain &), RMbufQ::Append(RMbufChain &) and RMbufQ::Prepend(RMbufChain &)

   889 To add etc mbuf chains to RMbufQs.

   890 

   891 Removed RMbufQ::CopyIn(TUint8*, TInt len, Tint offset) and RMbufQ::CopyOut(TUint8*, TInt len, TInt offset)

   892 

   893 Version 0.1(026)

   894 ================

   895 

   896 ESOCK E32 Sockets server 

   897 Version 0.1(025)

   898 ================

   899 

   900 Added code to shut the socket server down cleanly under WINS and fixed a couple of memory

   901 leaks this revealed.

   902 

   903 Changed creation interface to resolver classes:

   904 RHostResolver::Open(RSocketServ &aSocketServer,TUint anAddrFamily,TUint aProtocol);

   905 RServiceResolver::Open(RSocketServ& aSocketServer,TUint anAddrFamily,TUint sockType,TUint aProtocol);

   906 RNetDatabase::Open(RSocketServ& aSocketServer,TUint anAddrFamily,TUint aProtocol);

   907 These slight changes better reflect the domain of the resolver in question.

   908 

   909 Fixed busy defect in CNetDatabase.

   910 

   911 Moved the following functions from class ByteOrder to class BigEndian Get32(const TUint8* aPtr),

   912 Get16(const TUint8* aPtr), Put32(TUint8* aPtr, TUint32 aVal) and Put16(TUint8* aPtr, TUint16 aVal).

   913 These functions read and write byteswapped data at (possibly) misaligned addresses

   914 

   915 Added class LittleEndian which also implements Get32(const TUint8* aPtr), Get16(const TUint8* aPtr) and

   916 Put32(TUint8* aPtr, TUint32 aVal), Put16(TUint8* aPtr, TUint16 aVal); These funtions write data in host order 

   917 at (possibly) misaligned addresses.

   918 

   919 CancelAll now calls Shutdown with CServProviderBase::EImmediate rather than CServProviderBase::ENormal

   920 

   921 Added KSockWriteUrgent, KSIPeekData and KSockReadPeek. Protocols which support urgent data (AKA Out of band or unit data) should set 

   922 KSIUrgentData in their protocol info. Protocols which support peeking should set KSIPeekData. If a read request

   923 is issued with the peek bit set and a protocol supports peek it should process the read as normal but retain a 

   924 copy of the data for subsequent reads.

   925 

   926 Version 0.1(024)

   927 ================

   928 

   929 RSocket::GetOpt and RSocket::SetOpt become

   930 TInt RSocket::SetOpt(TUint anOptionName,TUint anOptionLevel,const TDesC8& anOption=TPtrC(NULL,0));

   931 TInt RSocket::GetOpt(TUint anOptionName,TUint anOptionLevel,TDes8& anOption);

   932 

   933 RSocket::Ioctl becomes 

   934 EXPORT_C void RSocket::Ioctl(TUint aCommand,TRequestStatus& aStatus,TDes8& aDesc=TPtr8(NULL,0),TUint aLevel=KLevelUnspecified)

   935 

   936 Added CProtocolBase::Tag() to retrun a TPtrC to the protocol's tag name

   937 

   938 Version 0.1(023)

   939 ================

   940 

   941 added RSocketServ::StartProtocol(TUint anAddrFamily,TUint aSockType,TUint aProtocol,TRequestStatus &aS)

   942 This can be used to asynchronously start a protocol so that a later call to RSocket::Open will

   943 complete immediately

   944 

   945 Asynchronous RSocket::Close has been removed - use asynchronous ShutDown then synchronous close to

   946 allow a protocol to drain.

   947 

   948 RSocket::Listen(), RSocket::Bind(), RSocket::LocalName() and RSocket::RemoteName() all 

   949 become synchronous.

   950 

   951 CProtocolBase::StartSending() becomes CProtocolBase::StartSending(CProtocolBase* aProtocol)

   952 aProtocol should point to the protocol which is raising the flow control on event.

   953 

   954 added client side MBufManager debugging functions:

   955 TInt RSocketServ::__DbgFailNextMbuf(TInt n); // Fail after n allocs on the core Mbuf allocator, 0 to cancel

   956 TInt RSocketServ::__DbgSetMbufPoolLimit(TInt n); // Set the maximum size of the mbuf pool to n bytes

   957 TInt RSocketServ::__DbgCheckMbuf(TInt n); // Check that there are only n bytes allocated from the entire pool

   958 TInt RSocketServ::__DbgMbufFreeSpace();	// return the amount of free space in the mbuf manager pool (bytes)

   959 TInt RSocketServ::__DbgMbufTotalSpace(); // return the total size of the mbuf manager pool (bytes)

   960 

   961 Added net database lookup classes. Unfortunately I have been unable to extract as much generality

   962 as I would have liked and so the net database Base classes provide little more than IPC and 

   963 request routing.

   964 

   965 RNetDatabase client side and CNetDBProvdBase server side - API are similar to other lookup classes and 

   966 should be obvious.

   967 

   968 Version 0.1(022)

   969 ================

   970 

   971 NetServ has been droped from the ESOCK releasables - EIKON ESOCK clients must once again 

   972 call StartESOCK(NULL) just like the rest of us.

   973 

   974 Switched the API to Accept() so that Accept is called on the listening socket and takes

   975 a blank socket as an argument - this is so that CancelAccept() is called on the same socket

   976 as Accept() was called on.

   977 i.e newConnection.Accept(listener,aStatus); becomes listener.Accept(newConnection,aStatus);

   978 

   979 Fixed defect in outgoing connection data copy.

   980 

   981 Version 0.1(021)

   982 ================

   983 

   984 Ini files moved to \e32data (WINS) or \data (EPOC)

   985 

   986 void CServProviderBase::PassiveOpen(...) becomes TInt CServProviderBase::PassiveOpen(...)

   987 this allows protocols to return errors (OOM etc.) on passive opens

   988 

   989 Added an extra parameter (CProtocolBase* aSourceProtocol=NULL) to all inter protocol calls

   990 so that the source of such a call may be identified. Protocols shouls call these functions

   991 with aSourceProtocol=this

   992 

   993 All ESOCK specific error numbers now negative

   994 

   995 Replaced ALIGN macros with templates AlignDown4 and IsAligned4

   996 

   997 Known defects - PDummy's service provider (WINS test code) can leak memory in OOM conditions

   998 

   999 Version 0.1(020)

  1000 ================

  1001 Reduced the memory footprint of ESOCK to about 77k from 0.5 Mb :-(

  1002 Fixed protocol re-start defect in NETSRV

  1003 

  1004 Version 0.1(019)

  1005 ================

  1006 J Day release.

  1007 NETSERV now starts (and links to) IRDA, TCP/IP and NCP32.

  1008 

  1009 WARNING

  1010 MNT command has a defect in GETBLD. After getting E32 v61 INCC WINS WINSDB it then gets 60 of EMARM.

  1011 Reason unknown as yet.)

  1012 

  1013 Version 0.1(018)

  1014 ================

  1015 

  1016 added reliance on C32 for netsrv

  1017 removed dependancies on econs

  1018 

  1019 NOTE COMMS PDD MUST BE CALLED ECDRV1

  1020 

  1021 Version 0.1(017)

  1022 ================

  1023 

  1024 17 was abandoned due to excess grief - it is haunted enter release 17 at your own peril

  1025 

  1026 Version 0.1(016)

  1027 ================

  1028 

  1029 Added the netserv releasable. This is used by the shell to configure

  1030 the network.

  1031 

  1032 Fixed PDUMMY and IPWINS with refeneces to EEmergency.

  1033 

  1034 Version 0.1(015)

  1035 ================

  1036 

  1037 CServProviderBase::EEmergency becomes CServProviderBase::EImmediate this is to make code for the the following defect fix

  1038 read more sensibly

  1039 

  1040 Canceling a pending connect will now shut a socket down EImmediate (was EEmergency) rather than 

  1041 ENormal - this is to stop ESOCK panicing on the call to CanClose()

  1042 

  1043 TActivePriority becomes TESOCKActivePriority to prevent a name clash with EIKON.

  1044 

  1045 fixed typeo KKDletaTimerInterval becomes DeltaTimerIneterval

  1046 

  1047 Version 0.1(014)

  1048 ================

  1049 

  1050 Brought releasble zip filenames into line with other projects

  1051 

  1052 WINS release in 	r:\ESOCK\ZIP\EWINS.nnn

  1053 WINS debug sdbs in 	r:\ESOCK\ZIP\EWINSDB.nnn

  1054 MARM release in 	r:\ESOCK\ZIP\EMARM.nnn

  1055 

  1056 Added RSocket::CancelAll

  1057 

  1058 RSocket::CancelXXXXX() no longer panics the client under any circumstances

  1059 

  1060 RSocket::Accept(RSocket& aListeningSocket,TSockAddr &aRemote TDes8 &aConnectData,TRequestStatus& aStatus)

  1061 becomes RSocket::Accept(RSocket& aListeningSocket,TDes8 &aConnectData,TRequestStatus& aStatus); 

  1062 clients can use RSocket::RemoteName after accepting if they need to know the address of the 

  1063 remote host initiating a conection.

  1064 

  1065 ESOCK's delta timer queue function becomes

  1066 IMPORT_C TTimerHandle CDeltaTimer::Queue(TTimeIntervalShortMicroSeconds aTimeInMicroSeconds,TCallBack& aCallBack);

  1067 to fall in line with E32 timer implementations i.e the "Micro" isn't a misprint anymore. KDletaTimerInterval 

  1068 specifies the granularity of the delta timer.

  1069 

  1070 CServProvider::Write(const TDesC8& aDesc, TUint options)=0; becomes 

  1071 CServProvider::Write(const TDesC8& aDesc, TUint options, TSockAddr* anAddr=NULL)=0;

  1072 SetRemote name is now only called as a result of RSocket::Connect()s - SendTo addresses will be sent through 

  1073 on the new TSockAddr argument. Connection oriented sockets should never have the TSockAddr set on a Write call.

  1074 

  1075 Version 0.1(013)

  1076 ================

  1077 

  1078 Includes ARM Build

  1079 

  1080 WINS release in 	r:\ESOCK\ZIP\ESKWINS.nnn

  1081 WINS debug sdbs in 	r:\ESOCK\ZIP\ESKSDB.nnn

  1082 MAMR release in 	r:\ESOCK\ZIP\ESKMARM.nnn

  1083 

  1084 WINS release includes

  1085 ESOCKxx.DLL	ESOCK dll and exe

  1086 ESOCKxx.LIB	ESOCK link library

  1087 PDUMMYxx.PRT Dummy protocol module

  1088 IPWINSxx.PRT TCP/IP over WinSock protocol module

  1089 

  1090 MARM relase includes

  1091 ESOCKxx.DLL ESOCK dll and exe

  1092 ESOCKxx.lib ESOCK link library

  1093 PDUMMY.PRT dummy protocol modules

  1094 

  1095 Release notes

  1096 =============

  1097 

  1098 AutoBind now called for SendTo on connectionless sockets not previously bound.

  1099 

  1100 Fixed looping defect in Error(MSocketNotify::EErrorConnect)

  1101 

  1102 removed external dependencies on ss_pman.h

  1103 

  1104 fixed SendTo failure on non connections oriented sockets.

  1105 

  1106 Version 0.1(012)

  1107 ================

  1108 

  1109 Added support for writable ini files.

  1110 	TInt CIniFile::WriteVar(const TDesC& aSection,const TDesC& aVarName,TInt aValue);

  1111 	TInt CIniFile::WriteVar(const TDesC& aSection,const TDesC& aVarName,const TDesC& aValue);

  1112 	void CIniFile::CommitL();

  1113 

  1114 

  1115 Version 0.1(011)

  1116 ================

  1117 

  1118 symbolic constant ESOCK_INI_FILE added to specify the path of the ini file.

  1119 

  1120 Added new class RMBufAsyncRequest which provides asyncronous buffer allocation for 

  1121 protocols to help them avoid dealocks.

  1122 

  1123 Added inlines RMBuf::Get() and RMBuf::Put() which safely get and put bytes to/from an

  1124 MBuf. These are not inlines in debug builds.

  1125 

  1126 Added inlines RMBuf::AllocL() and RMBuf::Free() so that there is now no need at all

  1127 for protocols to call CMBufManager functions.

  1128 

  1129 Removed operator->() from all classes and replaced with RMBufXXX::First() which

  1130 returns a pointer to the first MBuf in a buffer queue or chain.

  1131 

  1132 Changed void RMBufChain::Align(Tint aSize) to TInt RMBufChain::Align(Tint aSize).

  1133 The functionality of this has changed slightly also and now allow aSize to be greater