FCL/sf/os/deviceplatformrelease: comparison sf_config/config/inc/bldprivate.hrh

equal deleted inserted replaced

-:6d65d5acee06
+:e7fcfcd96f19
 *
 * Description:
 *
 */
 #ifndef __BLDPRIVATE_HRH
 #define __BLDPRIVATE_HRH
 /** #ENABLE_ABIV2_MODE
 /** #FF_TOUCH_CALL_HANDLING
 Touch: Advanced components for CS Voice Telephony.
 */
 #define FF_TOUCH_CALL_HANDLING
+/** #FF_WDP_EMMC
+Select writable demand paging eMMC flash driver build .
+*/
+#undef FF_WDP_EMMC
+/** #FF_WDP_NAND
+Select writable demand paging NAND flash driver build.
+*/
+#undef FF_WDP_NAND
 /** #FF_WS_NCIM
 This run-time flag is required for enableing NCIM at the run-time.
 NCIM, here onwards called as "Nokia account".
 There is a requirement to be able to remove NCIM feature at run-time.
 /** #HLP_ADDITIONAL_CALENDAR
 USED ONLY FOR HELP CONTENT VARIATION
 */
 #undef HLP_ADDITIONAL_CALENDAR
+/** #HLP_APAC_VARIATION
+Flag to be used for image creation time variation -- need to separate 3G/APAC
+help variants.
+*/
+#undef HLP_APAC_VARIATION
 /** #HLP_CAMERA_KEY
 USED ONLY FOR HELP CONTENT VARIATION
 */
 #undef HLP_CAMERA_KEY
 "Java implementation supports advanced features of Java Mobile Media API
 (JSR135) version 1.1, implemented in release 2.6 onwards. This flag must always
 be enabled when __JAVA_MMAPI11 is enabled."
 */
 #define JSR_135_SUPPORT
+/** #NO_CBCP_PARSER_IN_ROM
+Do not include symbian CBCP parser in rom
+*/
+#define NO_CBCP_PARSER_IN_ROM
+/** #NO_ENP_PARSER_IN_ROM
+This feature flag can be used to not to include symbian ENP Parser into ROM
+image.
+*/
+#define NO_ENP_PARSER_IN_ROM
+/** #NO_GFP_PARSER_IN_ROM
+This feature flag can be used to not to include symbian GFP Parser into ROM
+image.
+*/
+#define NO_GFP_PARSER_IN_ROM
+/** #NO_IACP_PARSER_IN_ROM
+his feature flag can be used to not to include symbian IACP Parser into ROM
+image.
+*/
+#define NO_IACP_PARSER_IN_ROM
+/** #NO_WAPP_PARSER_IN_ROM
+This feature flag can be used to not to include symbian WAPP parser into ROM
+image.
+*/
+#define NO_WAPP_PARSER_IN_ROM
 /** #RD_XML_PARSER_TOOLCHAIN
 "Used to turn on and off the use of the arabica and xercesc components in the
 build system, and code in the layout compiler."
 */
 @see SysUtil::GetSWVersion
 @see SysUtil::DiskSpaceBelowCriticalLevelL
 */
-#undef SYMBIAN_BAFL_SYSUTIL
+#define SYMBIAN_BAFL_SYSUTIL
 /** #SYMBIAN_DOS_SERVER_SERVICES
 Indicate that the DOS Server Services is present. This is needed to turn the RF
 on in an emergency call when the phone is in flight mode. In 9.5 we are using
 the System State Manager.
 /** #SYMBIAN_EXCLUDE_D_EXC
 This flag can be used to exclude Symbian's d_exc.exe from rom image when
 Symbian's base.iby is included
 */
-#undef SYMBIAN_EXCLUDE_D_EXC
+#define SYMBIAN_EXCLUDE_D_EXC
 /** #SYMBIAN_EXCLUDE_ECAM_STUBPLUGIN
 This flag is used to exclude Symbian Camera API stub
 */
 #undef SYMBIAN_EXCLUDE_ECAM_STUBPLUGIN
+/** #SYMBIAN_EXCLUDE_FAX
+Flag to exclude fax related binaries from images. No runtime variation, only
+used at image creation.
+*/
+#undef SYMBIAN_EXCLUDE_FAX
+/** #SYMBIAN_EXCLUDE_INFRARED
+removes symbian infrared components from rom
+*/
+#undef SYMBIAN_EXCLUDE_INFRARED
 /** #SYMBIAN_EXCLUDE_KEYMAP
 This flag can be used to include/exclude Symbian's KEYMAP_FILE (EKData.dll) from
 rom image if base.iby is included
 */
-#undef SYMBIAN_EXCLUDE_KEYMAP
+#define SYMBIAN_EXCLUDE_KEYMAP
+/** #SYMBIAN_EXCLUDE_LIBXML2
+This feature flag removes libxml2.dll from image.
+*/
+#undef SYMBIAN_EXCLUDE_LIBXML2
+/** #SYMBIAN_EXCLUDE_LIBXML2_DOM_XPATH_API
+This feature flag removes libxml2.dll from image.
+*/
+#undef SYMBIAN_EXCLUDE_LIBXML2_DOM_XPATH_API
+/** #SYMBIAN_EXCLUDE_LIBXML2_SAX_CPARSER_PLUGIN
+This feature flag removes libxml2.dll from image.
+*/
+#undef SYMBIAN_EXCLUDE_LIBXML2_SAX_CPARSER_PLUGIN
 /** #SYMBIAN_EXCLUDE_LOCATION_MANAGEMENT
 The macro SYMBIAN_EXCLUDE_LOCATION_MANAGEMENT is used to exclude the location
 management components of the Location Framework from ROM.Default value should be
 "Defined".
 /** #SYMBIAN_EXCLUDE_SCDV
 This flag can be used to exclude Symbian ScDv.dll from rom image when Symbian's
 base.iby is included
 */
-#undef SYMBIAN_EXCLUDE_SCDV
+#define SYMBIAN_EXCLUDE_SCDV
 /** #SYMBIAN_EXCLUDE_SIP
 Excludes Symbian SIP components.
 */
 #undef SYMBIAN_EXCLUDE_SIP
+/** #SYMBIAN_EXCLUDE_WIFI
+Removes Symbian wlan componets
+*/
+#undef SYMBIAN_EXCLUDE_WIFI
 /** #SYMBIAN_GRAPHICS_ADAPTATION
 This flag is used to take right graphics adaptation components to the ROM build
 */
 #define SYMBIAN_GRAPHICS_ADAPTATION                        None
 #undef SYMBIAN_GRAPHICS_USE_GCE
 /** #SYMBIAN_GRAPHICS_USE_WSERV2
 WServ2 binaries are used instead of WSERV1 versions.
 */
-#define SYMBIAN_GRAPHICS_USE_WSERV2
+#undef SYMBIAN_GRAPHICS_USE_WSERV2
+/** #SYMBIAN_HAL_NONSECUREOFFSET_PERSISTENCE_DISABLED
+Non secure offset persistence must be disabled in secure time
+*/
+#define SYMBIAN_HAL_NONSECUREOFFSET_PERSISTENCE_DISABLED   1
 /** #SYMBIAN_HAL_PENSTATE_PERSISTENCE_DISABLED
 Provide an option to allow platform to not save HALData::EPenState attribute.
 */
 #define SYMBIAN_HAL_PENSTATE_PERSISTENCE_DISABLED          1
 /** #SYMBIAN_INCLUDE_USB_RNDIS
 plugin, RNDIS agent and IP stack packet driver in the ROM.
 Introduced by PREQ1872.
 */
-#undef SYMBIAN_INCLUDE_USB_RNDIS
+#define SYMBIAN_INCLUDE_USB_RNDIS
+/** #SYMBIAN_MBUF_POOL_SIZE
+The size of the MBuf pool is adjustable. The MBuf pool is used for creating
+buffers for communication data.
+The MBuf is configurable in c32start.ini :
+\src\common\generic\comms-infras\rootserver\etc\
+It is runtime read configuration file, e.g.:
+[Global]
+MBufPoolSize=<initial size>,<max size> [bytes]
+Default MBufPoolSize=262144,262144.
+If single value => interpreted as max size.
+When an initial size is specified the pool grows when necessary until it reaches
+the maximum size. It does not shrink, however, so the RAM is not released until
+the device is rebooted.
+*/
+#define SYMBIAN_MBUF_POOL_SIZE                             0
 /** #SYMBIAN_MULTIMEDIA_A3FDEVSOUND
 This definition is used in symbian A3F build files.
 If this flag is enabled, A3F is build.
 if this flag is disabled, devsound is build.
 paging. From Symbian 9.4 onwards same pool is used by file system cache and thus
 the amount of pages should be increased in order to preserve good system
 performance and memory consumption balance. Increasing the value increases the
 memory consumption.
 */
-#define SYMBIAN_ODP_NUMBER_OF_MAX_LIVE_PAGES               4096
+#define SYMBIAN_ODP_NUMBER_OF_MAX_LIVE_PAGES               0
 /** #SYMBIAN_ODP_NUMBER_OF_MIN_LIVE_PAGES
 Defines the minimum number of 4k live pages available in the system for code
 paging. From Symbian 9.4 onwards same pool is used by file system cache and thus
 the amount of pages should be increased in order to preserve good system
 the transitioning between them according to licensee-defined
 policies and procedures.
 This define supports PREQ1871.
 */
-#undef SYMBIAN_SYSTEM_STATE_MANAGEMENT
+#define SYMBIAN_SYSTEM_STATE_MANAGEMENT
 /** #SYMBIAN_USE_DOS_SERVER_SERVICES
 The DOS_SERVER_SERVICES should indicate that the DOS Server Services is present.
 This is needed to turn the RF on in an emergency call when the phone is in
 flight mode.
 */
-#define SYMBIAN_USE_DOS_SERVER_SERVICES
+#undef SYMBIAN_USE_DOS_SERVER_SERVICES
 /** #SYMBIAN_USE_HCI_V2
 Defines if HCIv2 (bluetooth v2.0) is used in image or not.
 */
 #define SYMBIAN_USE_HCI_V2
 /** #SYMBIAN_USE_NOKIA_FEATURE_MANAGER
 The macro NOKIA_FEATURE_MANAGER should indicate that the Nokia version of the
 Feature Manager is present. The Feature Manager was part of the CoreOS, and
 there is a Symbian version of it in 9.5.
 */
-#define SYMBIAN_USE_NOKIA_FEATURE_MANAGER
+#undef SYMBIAN_USE_NOKIA_FEATURE_MANAGER
 /** #USE_MSCDB
 Enable usage of mass storage double buffering.
 */
 #define USE_MSCDB
 #define _EXCLUDE_SIP_LAN_SUPPORT_
 /** #__AAC
 Device supports Advanced Audio Coding (AAC) codec.
 */
-#undef __AAC
+#define __AAC
 /** #__ACCESSORY_FW
 Accessory framework is a Series 60 subsystem that enables adding various
 accessory types to the platform by licensees.
 */
 #undef __ALWAYS_ONLINE_PDPCONTEXT2
 /** #__AMR_NB
 Device supports Adaptive Multi-Rate (AMR) narrowband codec.
 */
-#undef __AMR_NB
+#define __AMR_NB
 /** #__AMR_WB
 Device supports Adaptive Multi-Rate (AMR) wideband codec.
 */
-#undef __AMR_WB
+#define __AMR_WB
 /** #__APPLICATION_CONTROLLABLE_AUDIO_ROUTING
 "An application UI can control audio routing in addition to adaption layer. If
 this feature is off, only the adaptation layer controls the audio routing and
 the corresponding DOS Plug-in API has to be implemented."
 /** #__EMAIL_UI
 Device has email UI components.
 */
 #define __EMAIL_UI
+/** #__ENABLE_BACKSTEPPING
+A flag that defines whether Backstepping -service is in use in Music Player.
+With Backstepping, MusicSuite and Music Widget interaction with music player is
+much more fluent. Back takes back to Music Suite, instead of Music Player
+library view. This flag will enable compilation of mpxbacksteppingutility, which
+music player uses to implement Backstepping. Synergy Change: ou1cimx1#122317
+*/
+#undef __ENABLE_BACKSTEPPING
 /** #__EN_POLICY_DOS
 "ENPolicy provides emergency number policy APIs and is used by phoneserver
 component.DOS emergency number policy checks emergency number by using ETel
 custom API.SOS emergency number policy checks emergency number by using ETel
 #define __MOBILE_ACTIVE_SYNC
 /** #__MP3
 Device supports MP3 audio codec.
 */
-#undef __MP3
+#define __MP3
 /** #__MROUTER
 Device uses Symbian MRrouter technology for PC connectivity.  If this feature is
 on the alternative feature __SRCS shall be off.
 */
 proactive commands or envelope command responses."
 */
 #define __SAT_LANGUAGE_NOTIFICATION
 /** #__SAT_LAUNCH_BROWSER
-"If this flag is enabled, upon receiving SAT Launch Browser command, the ME
+When this flag is enabled, upon receiving SAT Launch Browser command, the ME
 shall decide if it is able to execute the command. See details from 3GPP
-specifications."
+specifications.
 */
 #define __SAT_LAUNCH_BROWSER
 /** #__SAT_MO_SM_CONTROL
 "When this flag is enabled, mobile originated short messages are controlled by
 /** #__SERIES60_PHONE_CNAP
 Device supports Calling Name Presentation (CNAP) as defined in GSM 2.96. B
 subscriber is able to see A subscriber's number and name even the caller's ID is
 not stored in the phone. The name of the subscriber comes from network.
 */
-#undef __SERIES60_PHONE_CNAP
+#define __SERIES60_PHONE_CNAP
 /** #__SERIES60_PHONE_NUMBER_GROUPING
 Deprecated flag. Included for compatibility reasons. Value must equal to
 __PHONE_NUMBER_GROUPING
 */
 /** #__UI_TRANSITION_EFFECTS
 Defines whether transition effects are used in UI. Also controls whether the
 effect engine is included in ROM or not.
 */
-#undef __UI_TRANSITION_EFFECTS
+#define __UI_TRANSITION_EFFECTS
 /** #__UI_ZOOM
 This feature activates the zooming support in Series 60 UI.
 */
 #define __UI_ZOOM
 #undef __USB_PICTBRIDGE_UI
 /** #__USB_PTP
 Includes and excludes PTP (Picture Transfer Protocol) components.
 */
-#define __USB_PTP
+#undef __USB_PTP
 /** #__USB_REMOTE_PERSONALITY
 Includes and excludes S60 USB Remote Personality component.
 */
 #define __USB_REMOTE_PERSONALITY
 /** #__WINDOWS_MEDIA
 Device supports Windows Media. In other words it indicates whether WM-related
 components such as ASF-parser and codecs are in place.
 */
-#undef __WINDOWS_MEDIA
+#define __WINDOWS_MEDIA
 /** #__WINDOWS_MEDIA_DRM
 Device supports Windows Media DRM. In other words it indicates whether WMDRM
 related components such as WMDRM MTP plugin and WMDRM PK are in place.
 */
 showing it to user)."
 */
 #define __XSP_EXTENSION_MANAGER
 #endif // __BLDPRIVATE_HRH

changeset 1	e7fcfcd96f19
parent 0	6d65d5acee06
child 18	2ca1b6591d14