--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/libraries/spcre/libpcre/pcre/pcreposix.c Wed Jun 23 15:52:26 2010 +0100
@@ -0,0 +1,356 @@
+/*************************************************
+* Perl-Compatible Regular Expressions *
+*************************************************/
+
+/* PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+ Written by Philip Hazel
+ Copyright (c) 1997-2008 University of Cambridge
+
+-----------------------------------------------------------------------------
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of the University of Cambridge nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+-----------------------------------------------------------------------------
+*/
+
+
+/* This module is a wrapper that provides a POSIX API to the underlying PCRE
+functions. */
+
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+
+/* Ensure that the PCREPOSIX_EXP_xxx macros are set appropriately for
+compiling these functions. This must come before including pcreposix.h, where
+they are set for an application (using these functions) if they have not
+previously been set. */
+
+#if defined(_WIN32) && !defined(PCRE_STATIC)
+# define PCREPOSIX_EXP_DECL extern __declspec(dllexport)
+# define PCREPOSIX_EXP_DEFN __declspec(dllexport)
+#endif
+
+#include "pcre.h"
+#include "pcre_internal.h"
+#include "pcreposix.h"
+
+
+/* Table to translate PCRE compile time error codes into POSIX error codes. */
+
+static const int eint[] = {
+ 0, /* no error */
+ REG_EESCAPE, /* \ at end of pattern */
+ REG_EESCAPE, /* \c at end of pattern */
+ REG_EESCAPE, /* unrecognized character follows \ */
+ REG_BADBR, /* numbers out of order in {} quantifier */
+ REG_BADBR, /* number too big in {} quantifier */
+ REG_EBRACK, /* missing terminating ] for character class */
+ REG_ECTYPE, /* invalid escape sequence in character class */
+ REG_ERANGE, /* range out of order in character class */
+ REG_BADRPT, /* nothing to repeat */
+ REG_BADRPT, /* operand of unlimited repeat could match the empty string */
+ REG_ASSERT, /* internal error: unexpected repeat */
+ REG_BADPAT, /* unrecognized character after (? */
+ REG_BADPAT, /* POSIX named classes are supported only within a class */
+ REG_EPAREN, /* missing ) */
+ REG_ESUBREG, /* reference to non-existent subpattern */
+ REG_INVARG, /* erroffset passed as NULL */
+ REG_INVARG, /* unknown option bit(s) set */
+ REG_EPAREN, /* missing ) after comment */
+ REG_ESIZE, /* parentheses nested too deeply */
+ REG_ESIZE, /* regular expression too large */
+ REG_ESPACE, /* failed to get memory */
+ REG_EPAREN, /* unmatched brackets */
+ REG_ASSERT, /* internal error: code overflow */
+ REG_BADPAT, /* unrecognized character after (?< */
+ REG_BADPAT, /* lookbehind assertion is not fixed length */
+ REG_BADPAT, /* malformed number or name after (?( */
+ REG_BADPAT, /* conditional group contains more than two branches */
+ REG_BADPAT, /* assertion expected after (?( */
+ REG_BADPAT, /* (?R or (?[+-]digits must be followed by ) */
+ REG_ECTYPE, /* unknown POSIX class name */
+ REG_BADPAT, /* POSIX collating elements are not supported */
+ REG_INVARG, /* this version of PCRE is not compiled with PCRE_UTF8 support */
+ REG_BADPAT, /* spare error */
+ REG_BADPAT, /* character value in \x{...} sequence is too large */
+ REG_BADPAT, /* invalid condition (?(0) */
+ REG_BADPAT, /* \C not allowed in lookbehind assertion */
+ REG_EESCAPE, /* PCRE does not support \L, \l, \N, \U, or \u */
+ REG_BADPAT, /* number after (?C is > 255 */
+ REG_BADPAT, /* closing ) for (?C expected */
+ REG_BADPAT, /* recursive call could loop indefinitely */
+ REG_BADPAT, /* unrecognized character after (?P */
+ REG_BADPAT, /* syntax error in subpattern name (missing terminator) */
+ REG_BADPAT, /* two named subpatterns have the same name */
+ REG_BADPAT, /* invalid UTF-8 string */
+ REG_BADPAT, /* support for \P, \p, and \X has not been compiled */
+ REG_BADPAT, /* malformed \P or \p sequence */
+ REG_BADPAT, /* unknown property name after \P or \p */
+ REG_BADPAT, /* subpattern name is too long (maximum 32 characters) */
+ REG_BADPAT, /* too many named subpatterns (maximum 10,000) */
+ REG_BADPAT, /* repeated subpattern is too long */
+ REG_BADPAT, /* octal value is greater than \377 (not in UTF-8 mode) */
+ REG_BADPAT, /* internal error: overran compiling workspace */
+ REG_BADPAT, /* internal error: previously-checked referenced subpattern not found */
+ REG_BADPAT, /* DEFINE group contains more than one branch */
+ REG_BADPAT, /* repeating a DEFINE group is not allowed */
+ REG_INVARG, /* inconsistent NEWLINE options */
+ REG_BADPAT, /* \g is not followed followed by an (optionally braced) non-zero number */
+ REG_BADPAT, /* (?+ or (?- must be followed by a non-zero number */
+ REG_BADPAT, /* number is too big */
+ REG_BADPAT, /* subpattern name expected */
+ REG_BADPAT, /* digit expected after (?+ */
+ REG_BADPAT /* ] is an invalid data character in JavaScript compatibility mode */
+};
+
+/* Table of texts corresponding to POSIX error codes */
+
+static const char *const pstring[] = {
+ "", /* Dummy for value 0 */
+ "internal error", /* REG_ASSERT */
+ "invalid repeat counts in {}", /* BADBR */
+ "pattern error", /* BADPAT */
+ "? * + invalid", /* BADRPT */
+ "unbalanced {}", /* EBRACE */
+ "unbalanced []", /* EBRACK */
+ "collation error - not relevant", /* ECOLLATE */
+ "bad class", /* ECTYPE */
+ "bad escape sequence", /* EESCAPE */
+ "empty expression", /* EMPTY */
+ "unbalanced ()", /* EPAREN */
+ "bad range inside []", /* ERANGE */
+ "expression too big", /* ESIZE */
+ "failed to get memory", /* ESPACE */
+ "bad back reference", /* ESUBREG */
+ "bad argument", /* INVARG */
+ "match failed" /* NOMATCH */
+};
+
+
+
+
+/*************************************************
+* Translate error code to string *
+*************************************************/
+
+PCREPOSIX_EXP_DEFN size_t PCRE_CALL_CONVENTION
+regerror(int errcode, const regex_t *preg, char *errbuf, size_t errbuf_size)
+{
+const char *message, *addmessage;
+size_t length, addlength;
+
+message = (errcode >= (int)(sizeof(pstring)/sizeof(char *)))?
+ "unknown error code" : pstring[errcode];
+length = strlen(message) + 1;
+
+addmessage = " at offset ";
+addlength = (preg != NULL && (int)preg->re_erroffset != -1)?
+ strlen(addmessage) + 6 : 0;
+
+if (errbuf_size > 0)
+ {
+ if (addlength > 0 && errbuf_size >= length + addlength)
+ sprintf(errbuf, "%s%s%-6d", message, addmessage, (int)preg->re_erroffset);
+ else
+ {
+ strncpy(errbuf, message, errbuf_size - 1);
+ errbuf[errbuf_size-1] = 0;
+ }
+ }
+
+return length + addlength;
+}
+
+
+
+
+/*************************************************
+* Free store held by a regex *
+*************************************************/
+
+PCREPOSIX_EXP_DEFN void PCRE_CALL_CONVENTION
+regfree(regex_t *preg)
+{
+(pcre_free)(preg->re_pcre);
+}
+
+
+
+
+/*************************************************
+* Compile a regular expression *
+*************************************************/
+
+/*
+Arguments:
+ preg points to a structure for recording the compiled expression
+ pattern the pattern to compile
+ cflags compilation flags
+
+Returns: 0 on success
+ various non-zero codes on failure
+*/
+
+PCREPOSIX_EXP_DEFN int PCRE_CALL_CONVENTION
+regcomp(regex_t *preg, const char *pattern, int cflags)
+{
+const char *errorptr;
+int erroffset;
+int errorcode;
+int options = 0;
+
+if ((cflags & REG_ICASE) != 0) options |= PCRE_CASELESS;
+if ((cflags & REG_NEWLINE) != 0) options |= PCRE_MULTILINE;
+if ((cflags & REG_DOTALL) != 0) options |= PCRE_DOTALL;
+if ((cflags & REG_NOSUB) != 0) options |= PCRE_NO_AUTO_CAPTURE;
+if ((cflags & REG_UTF8) != 0) options |= PCRE_UTF8;
+
+preg->re_pcre = pcre_compile2(pattern, options, &errorcode, &errorptr,
+ &erroffset, NULL);
+preg->re_erroffset = erroffset;
+
+if (preg->re_pcre == NULL) return eint[errorcode];
+
+preg->re_nsub = pcre_info((const pcre *)preg->re_pcre, NULL, NULL);
+return 0;
+}
+
+
+
+
+/*************************************************
+* Match a regular expression *
+*************************************************/
+
+/* Unfortunately, PCRE requires 3 ints of working space for each captured
+substring, so we have to get and release working store instead of just using
+the POSIX structures as was done in earlier releases when PCRE needed only 2
+ints. However, if the number of possible capturing brackets is small, use a
+block of store on the stack, to reduce the use of malloc/free. The threshold is
+in a macro that can be changed at configure time.
+
+If REG_NOSUB was specified at compile time, the PCRE_NO_AUTO_CAPTURE flag will
+be set. When this is the case, the nmatch and pmatch arguments are ignored, and
+the only result is yes/no/error. */
+
+PCREPOSIX_EXP_DEFN int PCRE_CALL_CONVENTION
+regexec(const regex_t *preg, const char *string, size_t nmatch,
+ regmatch_t pmatch[], int eflags)
+{
+int rc, so, eo;
+int options = 0;
+int *ovector = NULL;
+int small_ovector[POSIX_MALLOC_THRESHOLD * 3];
+BOOL allocated_ovector = FALSE;
+BOOL nosub =
+ (((const pcre *)preg->re_pcre)->options & PCRE_NO_AUTO_CAPTURE) != 0;
+
+if ((eflags & REG_NOTBOL) != 0) options |= PCRE_NOTBOL;
+if ((eflags & REG_NOTEOL) != 0) options |= PCRE_NOTEOL;
+
+((regex_t *)preg)->re_erroffset = (size_t)(-1); /* Only has meaning after compile */
+
+/* When no string data is being returned, ensure that nmatch is zero.
+Otherwise, ensure the vector for holding the return data is large enough. */
+
+if (nosub) nmatch = 0;
+
+else if (nmatch > 0)
+ {
+ if (nmatch <= POSIX_MALLOC_THRESHOLD)
+ {
+ ovector = &(small_ovector[0]);
+ }
+ else
+ {
+ if (nmatch > INT_MAX/(sizeof(int) * 3)) return REG_ESPACE;
+ ovector = (int *)malloc(sizeof(int) * nmatch * 3);
+ if (ovector == NULL) return REG_ESPACE;
+ allocated_ovector = TRUE;
+ }
+ }
+
+/* REG_STARTEND is a BSD extension, to allow for non-NUL-terminated strings.
+The man page from OS X says "REG_STARTEND affects only the location of the
+string, not how it is matched". That is why the "so" value is used to bump the
+start location rather than being passed as a PCRE "starting offset". */
+
+if ((eflags & REG_STARTEND) != 0)
+ {
+ so = pmatch[0].rm_so;
+ eo = pmatch[0].rm_eo;
+ }
+else
+ {
+ so = 0;
+ eo = strlen(string);
+ }
+
+rc = pcre_exec((const pcre *)preg->re_pcre, NULL, string + so, (eo - so),
+ 0, options, ovector, nmatch * 3);
+
+if (rc == 0) rc = nmatch; /* All captured slots were filled in */
+
+if (rc >= 0)
+ {
+ size_t i;
+ if (!nosub)
+ {
+ for (i = 0; i < (size_t)rc; i++)
+ {
+ pmatch[i].rm_so = ovector[i*2];
+ pmatch[i].rm_eo = ovector[i*2+1];
+ }
+ if (allocated_ovector) free(ovector);
+ for (; i < nmatch; i++) pmatch[i].rm_so = pmatch[i].rm_eo = -1;
+ }
+ return 0;
+ }
+
+else
+ {
+ if (allocated_ovector) free(ovector);
+ switch(rc)
+ {
+ case PCRE_ERROR_NOMATCH: return REG_NOMATCH;
+ case PCRE_ERROR_NULL: return REG_INVARG;
+ case PCRE_ERROR_BADOPTION: return REG_INVARG;
+ case PCRE_ERROR_BADMAGIC: return REG_INVARG;
+ case PCRE_ERROR_UNKNOWN_NODE: return REG_ASSERT;
+ case PCRE_ERROR_NOMEMORY: return REG_ESPACE;
+ case PCRE_ERROR_MATCHLIMIT: return REG_ESPACE;
+ case PCRE_ERROR_BADUTF8: return REG_INVARG;
+ case PCRE_ERROR_BADUTF8_OFFSET: return REG_INVARG;
+ default: return REG_ASSERT;
+ }
+ }
+}
+
+/* End of pcreposix.c */