--- a/graphicsapitest/graphicssvs/bitgdi/scripts/GRAPHICS-BITGDI-PolygonFiller-PublicApi.script Fri Jun 11 14:58:47 2010 +0300
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,686 +0,0 @@
-//
-// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).
-// All rights reserved.
-// This component and the accompanying materials are made available
-// under the terms of "Eclipse Public License v1.0"
-// which accompanies this distribution, and is available
-// at the URL "http://www.eclipse.org/legal/epl-v10.html".
-//
-// Initial Contributors:
-// Nokia Corporation - initial contribution.
-//
-// Contributors:
-//
-// Description:
-//
-//! @file
-//! @SYMTestSuiteName GRAPHICS-BITGDI-PolygonFiller-PublicApi
-//! @SYMScriptTestEnvironment
-
-/////////////////////////////////////////////////////////////////////
-// GRAPHICS-BITGDI-PolygonFiller-PublicApi.script
-//
-// Tests all public elements of the CPolygonFiller
-// classes as a means of confidence that the APIs work as expected.
-//
-// The purpose is to provide a regression test suite of PublishedAll APIs for CPolygonFiller
-// The tests are fully automated.
-/////////////////////////////////////////////////////////////////////
-
-LOAD_SUITE T_GraphicsBitgdiApi
-DELAY 1000
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0001
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0001
-//! @SYMAPI CPolygonFiller::Construct(const CArrayFix<TPoint>{ptr},CGraphicsContext::TFillRule,TUsage)
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc Create a CPolygonFiller object with the type: CArrayFix, EAlternate and EGetAllPixelRunsSequentially
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: CArrayFix, EAlternate and EGetAllPixelRunsSequentially
-//! 2. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The CpolygonFiller object should be created without causing panic.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0001-0001-Construct_Command02
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0001
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0002
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0002
-//! @SYMAPI CPolygonFiller::Construct(const CArrayFix<TPoint>{ptr},CGraphicsContext::TFillRule,TUsage)
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc Create a CPolygonFiller object with the type: CArrayFix, EAlternate,EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: CArrayFix, EAlternate,EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The CpolygonFiller object should be created without causing panic.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0002-0001-Construct_Command02
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0002
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0003
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0003
-//! @SYMAPI CPolygonFiller::Construct(const CArrayFix<TPoint>{ptr},CGraphicsContext::TFillRule,TUsage)
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc Create a CPolygonFiller object with the type: CArrayFix, EWinding,EGetAllPixelRunsSequentially
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: CArrayFix, EWinding,EGetAllPixelRunsSequentially
-//! 2. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The CpolygonFiller object should be created without causing panic.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0003-0001-Construct_Command02
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0003
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0004
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0004
-//! @SYMAPI CPolygonFiller::Construct(const CArrayFix<TPoint>{ptr},CGraphicsContext::TFillRule,TUsage)
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc Create a CPolygonFiller object with the type: CArrayFix, EWinding,EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: CArrayFix, EWinding,EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The CpolygonFiller object should be created without causing panic.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0004-0001-Construct_Command02
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0004
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0005
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0005
-//! @SYMAPI CPolygonFiller::Construct(<TPoint>{ptr},TInt,CGraphicsContext::TFillRule,TUsage)
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc Create a CPolygonFiller object with the type: TPoint, EWinding, EGetAllPixelRunsSequentially
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: TPoint, EWinding, EGetAllPixelRunsSequentially
-//! 2. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The CpolygonFiller object should be created without causing panic.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0005-0001-Construct_Command02
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0005
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0006
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0006
-//! @SYMAPI CPolygonFiller::Construct(<TPoint>{ptr},TInt,CGraphicsContext::TFillRule,TUsage)
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc Create a CPolygonFiller object with the type: TPoint, EWinding,EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: TPoint, EWinding,EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The CpolygonFiller object should be created without causing panic.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0006-0001-Construct_Command02
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0006
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0007
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0007
-//! @SYMAPI CPolygonFiller::Construct(<TPoint>{ptr},TInt,CGraphicsContext::TFillRule,TUsage)
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc Create a CPolygonFiller object with the type: TPoint, EAlternate,EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: TPoint, EAlternate,EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The CpolygonFiller object should be created without causing panic.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0007-0001-Construct_Command02
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0007
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0008
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0008
-//! @SYMAPI CPolygonFiller::Construct(<TPoint>{ptr},TInt,CGraphicsContext::TFillRule,TUsage)
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc Create a CPolygonFiller object with the type: TPoint, EAlternate,EGetAllPixelRunsSequentially
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: TPoint, EAlternate,EGetAllPixelRunsSequentially
-//! 2. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The CpolygonFiller object should be created without causing panic.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0008-0001-Construct_Command02
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0008
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0009
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0009
-//! @SYMAPI CPolygonFiller::GetNextPixelRun(TBool{ref},TInt{ref},TInt{ref},TInt{ref})
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRun of the object constructed successfully with the type: CArrayFix, EAlternate,EGetAllPixelRunsSequentially
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: CArrayFix, EAlternate,EGetAllPixelRunsSequentially
-//! 2. GetNextPixelRun of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The return values of GetNextPixelRun are as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0009-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRun GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0009-0001-GetNextPixelRun_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0009
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0010
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0010
-//! @SYMAPI CPolygonFiller::GetNextPixelRun(TBool{ref},TInt{ref},TInt{ref},TInt{ref})
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRun of the object constructed successfully with the type: CArrayFix, EWinding,EGetAllPixelRunsSequentially
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: CArrayFix, EWinding,EGetAllPixelRunsSequentially
-//! 2. GetNextPixelRun of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The return values of GetNextPixelRun are as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0010-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRun GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0010-0001-GetNextPixelRun_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0010
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0011
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0011
-//! @SYMAPI CPolygonFiller::GetNextPixelRun(TBool{ref},TInt{ref},TInt{ref},TInt{ref})
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRun of the object constructed successfully with the type: CArrayFix, EAlternate, EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! @SYMTestActions 1. Createa CPolygonFiller with the type: CArrayFix, EAlternate, EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. GetNextPixelRun of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The return values of GetNextPixelRun are as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0011-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRun GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0011-0001-GetNextPixelRun_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0011
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0012
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0012
-//! @SYMAPI CPolygonFiller::GetNextPixelRun(TBool{ref},TInt{ref},TInt{ref},TInt{ref})
-//! @SYMAuthor DorothyZhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRun of the object constructed successfully with the type: CArrayFix, EWinding, EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: CArrayFix, EWinding,EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. GetNextPixelRun of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The return values of GetNextPixelRun are as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0012-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRun GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0012-0001-GetNextPixelRun_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0012
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0013
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0013
-//! @SYMAPI CPolygonFiller::GetNextPixelRun(TBool{ref},TInt{ref},TInt{ref},TInt{ref})
-//! @SYMAuthor DorothyZhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRun of the CPolygonfiller object constructed with Horizontal line
-//! @SYMTestActions 1. Create a CPolygonFiller object by Construct(<TPoint>*, TInt,EAlternate,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of the points for a Horizontal line: (50,100),(60,100),(70,100),(80,100).
-//! 1.2 Set the fill rule type : EAlternate
-//! 1.3 Set the Usage type: EGetAllPixelRunsSequentially
-//! 2. GetNextPixelRun of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRun call should return the initial scan line correctly as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0013-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRun GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0013-0001-GetNextPixelRun_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0013
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0014
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0014
-//! @SYMAPI CPolygonFiller::GetNextPixelRun(TBool{ref},TInt{ref},TInt{ref},TInt{ref})
-//! @SYMAuthor DorothyZhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRun of the CPolygonfiller object constructed with vertical line
-//! @SYMTestActions 1. Create a CPolygonFiller object by Construct(<TPoint>*, TInt, EAlternate,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points of the new polygon, a vertical line: (50,50),(50,60),(50,80),(50,120).
-//! 1.2 Set the fill rule : EAlternate
-//! 1.3 Set the polygon algorithm: EGetAllPixelRunsSequentially
-//! 2. GetNextPixelRun of the object.
-//! 3. Destoy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRun call should return the initial scan line, the start and end position on the scan line correctly as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0014-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRun GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0014-0001-GetNextPixelRun_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0014
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0015
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0015
-//! @SYMAPI CPolygonFiller::GetNextPixelRun(TBool{ref},TInt{ref},TInt{ref},TInt{ref})
-//! @SYMAuthor DorothyZhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRun of the CPolygonFiller object constructed with a point
-//! @SYMTestActions 1. Create a CPolygonFiller object by Construct(<TPoint>*, TInt, EAlternate,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points of the new polygon:(0,0),(0,0),(0,0),(0,0).
-//! 1.2 Set the fill rule: EAlternate
-//! 1.3 Set the polygon algorithm: EGetAllPixelRunsSequentially
-//! 2. GetNextPixelRun
-//! 3. Destroy the object
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRun call should return the initial scan line correctly as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0015-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRun GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0015-0001-GetNextPixelRun_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0015
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0016
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0016
-//! @SYMAPI CPolygonFiller::GetNextPixelRun(TBool{ref},TInt{ref},TInt{ref},TInt{ref})
-//! @SYMAuthor DorothyZhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRun of the CPolygonFiller object constructed with polygon in negative area
-//! @SYMTestActions 1. Create a CPolygonFiller object by Construct(<TPoint>*, TInt, EAlternate, EGetAllPixelRunsSequentially)
-//! 1.1 Set the lisf of points of the new polygon in negative area: (-10,-10),(-20,-20),(-10,-20),(0,0).
-//! 1.2 Set the fill rule: EAlternate
-//! 1.3 Set the polygon algorithm: EGetAllPixelRunsSequentially
-//! 2. GetNextPixelRun of the object
-//! 3. Destroy the object
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRun call should return the initial scan line, the start and end position on the scan line correctly as expected
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0016-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRun GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0016-0001-GetNextPixelRun_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0016
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0017
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0017
-//! @SYMAPI CPolygonFiller::GetNextPixelRun(TBool{ref},TInt{ref},TInt{ref},TInt{ref})
-//! @SYMAuthor DorothyZhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRun of the object constructed with 13 sides polygon
-//! @SYMTestActions 1. Create a CPolygonFiller object with the type: TPoint, EAlternate,EGetAllPixelRunsSequentially
-//! 1.1 Set the lisf of points of the 13 sides polygon: (30,100),(30,60),(60,30),(90,60),(120,30),(150,60),(180,30),(210,60),(240,30),(270,60),(300,30),(330,60),(330,100)
-//! 1.2 Set the fill rule: EAlternate
-//! 1.3 Set the polygon algorithm: EGetAllPixelRunsSequentially
-//! 2. GetNextPixelRun of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The return values of GetNextPixelRun are as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0017-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRun GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0017-0001-GetNextPixelRun_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0017
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0020
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0020
-//! @SYMAPI CPolygonFiller::GetNextPixelRunOnSpecifiedScanLine(TBool{ref},TInt,TInt{ref},TInt{ref})
-//! @SYMAuthor DorothyZhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRunOnSpecifiedScanLine of the CPolygonFiller object constructed with polygon in square shape using EAlternate fill rule
-//! @SYMTestActions 1. Create a CPolygonFiller object by Construct(<TPoint>*, TInt, EAlternate,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points of the new polygon:(50,50),(100,50),(100,100),(50,100)
-//! 1.2 Set the fill rule of the polygon: EAlternate
-//! 1.3 Set the polygon algorithm: EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 2.1 Specifiy the scan line: 60.
-//! 2.2 GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRunOnSpecifiedScanLine call should return the start and end position on the scan line correctly as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0020-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRunOnSpecifiedScanLine GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0020-0001-GetNextPixelRunOnSpecifiedScanLine_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0020
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0021
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0021
-//! @SYMAPI CPolygonFiller::GetNextPixelRunOnSpecifiedScanLine(TBool{ref},TInt,TInt{ref},TInt{ref})
-//! @SYMAuthor DorothyZhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRunOnSpecifiedScanLine of the CPolygonFiller object constructed with polygon in square shape using EWinding fill rule
-//! @SYMTestActions 1. Create a CPolygonFiller object by Construct(<TPoint>*,TInt,EAlternate,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points of the new polygon:(50,50),(100,50),(100,100),(50,100)
-//! 1.2 Set the fill rule of the polygon: EWinding
-//! 1.3 Set the polygon algorithm: EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 2.1 Specifiy the scan line: 60.
-//! 2.2 GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRunOnSpecifiedScanLine call should return the start and end position on the scan line correctly as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0021-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRunOnSpecifiedScanLine GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0021-0001-GetNextPixelRunOnSpecifiedScanLine_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0021
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0022
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0022
-//! @SYMAPI CPolygonFiller::GetNextPixelRunOnSpecifiedScanLine(TBool{ref},TInt,TInt{ref},TInt{ref})
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRunOnSpecifiedScanLine of the CPolygonFiller object constructed with polygon in Horizontal shape
-//! @SYMTestActions 1. Create a CPolygonFiller object by Construct(<TPoint>*, TInt, EAlternate,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points of the new polygon, a horizontal line:{(50,100),(60,100),(70,100),(80,100)}
-//! 1.2 Set the fill rule of the polygon: EAlternate
-//! 1.3 Set the polygon algorithm: EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. GetNextPixelRunOnSpecifiedScanLine
-//! 2.1 Specifiy the scan line: 100.
-//! 2.2 GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRunOnSpecifiedScanLine call should return the start and end position on the specified scan line correctly as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0022-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRunOnSpecifiedScanLine GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0022-0001-GetNextPixelRunOnSpecifiedScanLine_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0022
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0023
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0023
-//! @SYMAPI CPolygonFiller::GetNextPixelRunOnSpecifiedScanLine(TBool{ref},TInt,TInt{ref},TInt{ref})
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRunOnSpecifiedScanLine of the CPolygonFiller constructed with polygon in Vertical shape
-//! @SYMTestActions 1. Create a CPolygonFiller with polygon a vertical line by Construct(<TPoint>*, TInt, EAlternate,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points of the new polygon, a vertical line: (50,50),(50,60),(50,80),(50,120).
-//! 1.2 Set the fill rule of the polygon: EWinding
-//! 1.3 Set the polygon algorithm: EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 2.1 Specifiy the scan line: 60.
-//! 2.2 GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRunOnSpecifiedScanLine call should return the start and end position on the specified scan line correctly as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0023-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRunOnSpecifiedScanLine GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0023-0001-GetNextPixelRunOnSpecifiedScanLine_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0023
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0024
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0024
-//! @SYMAPI CPolygonFiller::GetNextPixelRunOnSpecifiedScanLine(TBool{ref},TInt,TInt{ref},TInt{ref})
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRunOnSpecifiedScanLine of the CPolygonFiller object constructed with a single point
-//! @SYMTestActions 1. Create a CPolygonFiller with polygon by Construct(<TPoint>*, TInt, EWinding,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points of the new polygon: (0,0),(0,0),(0,0),(0,0).
-//! 1.2 Set the fill rule of the polygon: EWinding
-//! 1.3 Set the polygon algorithm: EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 2.1 Specifiy the scan line: 0.
-//! 2.2 GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRunOnSpecifiedScanLine call should return the start and end position on the specified scan line correctly as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0024-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRunOnSpecifiedScanLine GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0024-0001-GetNextPixelRunOnSpecifiedScanLine_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0024
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0025
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0025
-//! @SYMAPI CPolygonFiller::GetNextPixelRunOnSpecifiedScanLine(TBool{ref},TInt,TInt{ref},TInt{ref})
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRunOnSpecifiedScanLine of the CPolygonFiller object constructed with polygon in negative area
-//! @SYMTestActions 1. Create a CPolygonFiller with polygon by Construct(<TPoint>*, TInt, EWinding,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points of the new polygon: (-10,-10),(-20,-20),(-10,-20),(0,0).
-//! 1.2 Set the fill rule of the polygon: EWinding
-//! 1.3 Set the polygon algorithm: EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 2.1 Specifiy the scan line: -15.
-//! 2.2 GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRunOnSpecifiedScanLine call should return the start and end position on the specified scan line correctly as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0025-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRunOnSpecifiedScanLine GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0025-0001-GetNextPixelRunOnSpecifiedScanLine_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0025
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0026
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0026
-//! @SYMAPI CPolygonFiller::GetNextPixelRunOnSpecifiedScanLine(TBool{ref},TInt,TInt{ref},TInt{ref})
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRunOnSpecifiedScanLine of the CPolygonFiller object with the specified scan line out of the polygon range
-//! @SYMTestActions 1. Create a CPolygonFiller with polygon by Construct(<TPoint>*, TInt, EWinding,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points of the new polygon in square shape: (50,50),(100,50),(100,100),(50,100)
-//! 1.2 Set the fill rule of the polygon: EWinding
-//! 1.3 Set the polygon algorithm: EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. GetNextPixelRunOnSpecifiedScanLine: scanline out of the range
-//! 2.1 Specify the scan line out of the polygon range: 110
-//! 2.2 GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRunOnSpecifiedScanLine call should return EFalse as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0026-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRunOnSpecifiedScanLine GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0026-0001-GetNextPixelRunOnSpecifiedScanLine_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0026
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0027
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0027
-//! @SYMAPI CPolygonFiller::GetNextPixelRunOnSpecifiedScanLine(TBool{ref},TInt,TInt{ref},TInt{ref})
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc GetNextPixelRunOnSpecifiedScanLine of the CPolygonFiller object constructed with 11 sides polygon
-//! @SYMTestActions 1. Create a CPolygonFiller with polygon by Construct(<TPoint>*, TInt, EWinding,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points for the new 11 sides polygon: (0,0),(60,60),(90,30),(120,60),(150,30),(180,60),(210,30),(240,60),(270,30),(300,60),(330,30)
-//! 1.2 Set the fill rule of the polygon: EWinding
-//! 1.3 Set the polygon algorithm: EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 2.1 Specifiy the scan line: 40.
-//! 2.2 GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 3. Destroy the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults The GetNextPixelRunOnSpecifiedScanLine call should return the start and end position on the specified scan line correctly.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0027-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRunOnSpecifiedScanLine GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0027-0001-GetNextPixelRunOnSpecifiedScanLine_Command03
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0027
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0028
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0028
-//! @SYMAPI CPolygonFiller::Reset()
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc Rest the CPolygonFiller object constructed using EGetAllPixelRunsSequentially
-//! @SYMTestActions 1. Create a CPolygonFiller with polygon by Construct(<TPoint>*, TInt, EWinding,EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points of the new polygon in square shape: (50,50),(100,50),(100,100),(50,100)
-//! 1.2 Set the fill rule of the polygon: EWinding
-//! 1.3 Set the polygon algorithm: EGetAllPixelRunsSequentially
-//! 2. GetNextPixelRun of the object
-//! 3. Reset
-//! 4. GetNextPixelRun of the object
-//! 5. Destroy the object
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults 1. The Reset() call should not cause any panic.
-//! 2. The second GetNextPixelRun call should return the initial scan line and the start and end position on the scan line as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0028-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRun GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0028-0001-GetNextPixelRun_Command03
- COMMAND polygonfiller Reset
- COMMAND polygonfiller GetNextPixelRun GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0028-0001-GetNextPixelRun_Command05
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0028
-
-START_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0029
-//! @SYMTestCaseID GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0029
-//! @SYMAPI CPolygonFiller::Reset()
-//! @SYMAuthor Dorothy Zhang
-//! @SYMCreationDate 04/12/2008
-//! @SYMTestCaseDesc Reset the CPolygonFiller object constructed using EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! @SYMTestActions 1. Create a CPolygonFiller object by Construct(<TPoint>*, TInt, EAlternate, EGetAllPixelRunsSequentially)
-//! 1.1 Set the list of points of the new polygon in square shape: (50,50),(100,50),(100,100),(50,100)
-//! 1.2 Set the fill rule of the polygon: EWinding
-//! 1.3 Set the polygon algorithm: EGetPixelRunsSequentiallyForSpecifiedScanLines
-//! 2. GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 2.1 Specify the scan line: 50
-//! 2.2 GetNextPixelRunOnSpecifiedScanLine.
-//! 3. Reset
-//! 4. GetNextPixelRunOnSpecifiedScanLine of the object.
-//! 4.1 Specify the scan line: 50
-//! 4.2 GetNextPixelRunOnSpecifiedScanLine
-//! 5. Destory the object.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults 1. The Reset() Call should not cause any panic.
-//! 2. The second GetNextPixelRunOnSpecifiedScanLine() call should return EFalse as expected.
-//! @SYMTestType CIT
- START_TEST_BLOCK 10 T_GraphicsBitgdiApi c:\graphics\GRAPHICS-BITGDI-PolygonFiller-PublicAPI.ini
- CREATE_OBJECT CPolygonFiller polygonfiller
- COMMAND polygonfiller new
- COMMAND polygonfiller Construct GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0029-0001-Construct_Command02
- COMMAND polygonfiller GetNextPixelRunOnSpecifiedScanLine GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0029-0001-GetNextPixelRunOnSpecifiedScanLine_Command03
- COMMAND polygonfiller Reset
- COMMAND polygonfiller GetNextPixelRunOnSpecifiedScanLine GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0029-0001-GetNextPixelRunOnSpecifiedScanLine_Command05
- COMMAND polygonfiller ~
- END_TEST_BLOCK
-END_TESTCASE GRAPHICS-BITGDI-PolygonFiller-PublicAPI-0029
-
-