--- a/graphics_plat/guestvideodriver_api/inc/guestvideodriverinterfaceconstants.h Thu Sep 02 16:04:46 2010 +0100
+++ b/graphics_plat/guestvideodriver_api/inc/guestvideodriverinterfaceconstants.h Fri Sep 03 12:59:30 2010 +0300
@@ -20,42 +20,52 @@
// pvbus.pvbus_m_range[0x60000000..0x62ffffff] => graphicsvirtualhw.mbus; //=>Reserve own memory area later
// pvbus.pvbus_m_range[0x63000000..0x63000fff] => graphicsvirtualhw.pbus; //=>Reserve own memory area later
-#define VVI_REGISTERS_BASE 0x00000000
+#ifdef PLATSIM_CONFIG
+#define VVI_BASE 0x60000000
+#else
+#define VVI_BASE 0x00000000
+#endif // PLATSIM_CONFIG
+
// base address
-#define VVI_REGISTERS_BASE_ADDRESS 0xC6000000 + 0x10*0x1000
+#define VVI_REGISTERS_BASE_ADDRESS VVI_BASE + 0x03000000
#define VVI_REGISTERS_MEMORY_SIZE 0x1000
#define VVI_REGISTERS_MASK 0x0FFF
-#define VVI_PARAMETERS_INPUT_BASE_ADDRESS VVI_REGISTERS_BASE + 0x00000000
+#define VVI_PARAMETERS_INPUT_BASE_ADDRESS VVI_BASE + 0x00000000
#define VVI_PARAMETERS_INPUT_MEMORY_SIZE 0x01000000
-#define VVI_PARAMETERS_OUTPUT_BASE_ADDRESS VVI_REGISTERS_BASE + 0x01000000
+#define VVI_PARAMETERS_OUTPUT_BASE_ADDRESS VVI_BASE + 0x01000000
#define VVI_PARAMETERS_OUTPUT_MEMORY_SIZE 0x01000000
-#define VVI_FRAMEBUFFER_BASE_ADDRESS VVI_REGISTERS_BASE + 0x02000000
+#define VVI_FRAMEBUFFER_BASE_ADDRESS VVI_BASE + 0x02000000
#define VVI_FRAMEBUFFER_MEMORY_SIZE 0x01000000
// register indices, TODO: cleanup needed, some are not used
-#define VVI_R_ID 0x0000
-#define VVI_R_IRQ_ENABLE 0x0004
-#define VVI_R_IRQ_STATUS 0x0008
-#define VVI_R_COMMAND 0x000c
-#define VVI_R_PARAMETER_LOAD 0x0010
-#define VVI_R_ERROR 0x0014
-#define VVI_R_INPUT_BUFFER_TAIL 0x0018
-#define VVI_R_INPUT_BUFFER_HEAD 0x001c
-#define VVI_R_INPUT_BUFFER_READ_COUNT 0x0020
-#define VVI_R_INPUT_BUFFER_WRITE_COUNT 0x0024
-#define VVI_R_INPUT_BUFFER_MAX_TAIL 0x0028
-#define VVI_R_REQUEST_ID 0x002c
-#define VVI_R_SHARED_CMD_MEMORY_BASE 0x0030
-#define VVI_R_SHARED_FRAMEBUFFER_MEMORY_BASE 0x0034
-#define VVI_R_LASTREG 0x0038 // not a register, address of last register
+#define VVI_R_ID 0x0000
+#define VVI_R_IRQ_ENABLE 0x0004
+#define VVI_R_IRQ_STATUS 0x0008
+#define VVI_R_COMMAND 0x000c
+#define VVI_R_PARAMETER_LOAD 0x0010
+#define VVI_R_ERROR 0x0014
+#define VVI_R_INPUT_BUFFER_TAIL 0x0018
+#define VVI_R_INPUT_BUFFER_HEAD 0x001c
+#define VVI_R_INPUT_BUFFER_READ_COUNT 0x0020
+#define VVI_R_INPUT_BUFFER_WRITE_COUNT 0x0024
+#define VVI_R_INPUT_BUFFER_MAX_TAIL 0x0028
+#define VVI_R_REQUEST_ID 0x002c
+#define VVI_R_SHARED_CMD_MEMORY_BASE 0x0030
+#define VVI_R_SHARED_FRAMEBUFFER_MEMORY_BASE 0x0034
+#define VVI_R_LASTREG 0x0038 // not a register, address of last register
// COMMAND register values
#define VVI_EXECUTE 0
//IRQ number
-#define VVI_IRQ 11
+#ifdef PLATSIM_CONFIG
+#define VVI_IRQ 391
+#else
+// Jani - This is defined in syborg.h "EIntGraphics" - should we get it from there?
+#define VVI_IRQ 13
+#endif // PLATSIM_CONFIG
#endif