// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// e32test\misc\t_cputime.cpp

// Tests User::FastCounter() and RThread::GetCpuTime()

// Note: This test only works on the emulator when run in textshell mode.  The

// reason for this is that is assumes that it will be able to use 100% of CPU

// time, but when techview is starting up there are many other threads consuming

// CPU time.

// 

//

#include <e32test.h>

#include <e32svr.h>

#include <u32hal.h>

#include <hal.h>

#ifdef __WINS__

#include <e32wins.h>

#endif

RTest test(_L("T_CPUTIME"));

_LIT(KUp, "up");

_LIT(KDown, "down");

const TInt KLongWait  = 3000000;  // 3 seconds

const TInt KShortWait =  100000;  // 0.1 seconds

const TInt KTolerance =     500;  // 0.5 ms

const TInt numCpus = UserSvr::HalFunction(EHalGroupKernel, EKernelHalNumLogicalCpus, 0, 0);

#define FailIfError(EXPR) \

	{ \

	TInt aErr = (EXPR); \

	if (aErr != KErrNone) \

		{ \

		test.Printf(_L("Return code == %d\n"), aErr); \

		test(EFalse); \

		} \

	}

class TThreadParam

	{

public:

	TInt iCpu;

	RSemaphore iSem;

	};

TBool GetCpuTimeIsSupported()

	{

	RThread thread;

	TTimeIntervalMicroSeconds time;

	TInt err = thread.GetCpuTime(time);

	test(err == KErrNone || err == KErrNotSupported);

	return err == KErrNone;

	}

TInt SetCpuAffinity(TInt aCore)

    {

    TInt r = UserSvr::HalFunction(EHalGroupKernel, EKernelHalLockThreadToCpu, (TAny *)aCore, 0);

    test(r==KErrNone);  

    return r;

    }

//! @SYMTestCaseID t_cputime_0

//! @SYMTestType CT

//! @SYMTestCaseDesc Fast counter tests

//! @SYMREQ CR RFID-66JJKX

//! @SYMTestActions Compares the high res timer against the nanokernel microsecond tick

//! @SYMTestExpectedResults The differnce measured should be < 1%

//! @SYMTestPriority High

//! @SYMTestStatus Defined

void TestFastCounter()

	{

	test.Start(_L("Comparing NTickCount with FastCounter"));

	TInt tickPeriod = 0;

	FailIfError(HAL::Get(HAL::ENanoTickPeriod, tickPeriod));

	test.Printf(_L("  tick period == %d\n"), tickPeriod);

	TInt countFreq = 0;

	FailIfError(HAL::Get(HAL::EFastCounterFrequency, countFreq));

	test.Printf(_L("  count freq == %d\n"), countFreq);

	TBool fcCountsUp = 0;

	FailIfError(HAL::Get(HAL::EFastCounterCountsUp, fcCountsUp));

	test.Printf(_L("  count dir == %S\n"), fcCountsUp ? &KUp : &KDown);

	TUint startTick = User::NTickCount();

	TUint startCount = User::FastCounter();

	User::After(KLongWait);

	TUint endTick = User::NTickCount();

	TUint endCount = User::FastCounter();

	TInt tickDiff = endTick - startTick;

	TInt countDiff = fcCountsUp ? (endCount - startCount) : (startCount - endCount);

	test.Printf(_L("  tick difference == %d\n"), tickDiff);

	test.Printf(_L("  fast count difference == %d\n"), countDiff);

	TInt elapsedTickUs = tickDiff * tickPeriod;

	TInt elapsedCountUs = (TInt)(((TInt64)1000000 * countDiff) / countFreq);

	test.Printf(_L("  tick time == %d\n"), elapsedTickUs);

	test.Printf(_L("  count time == %d\n"), elapsedCountUs);

	TReal diff = (100.0 * Abs(elapsedCountUs - elapsedTickUs)) / elapsedTickUs;

	test.Printf(_L("  %% difference == %f\n"), diff);

	test(diff < 1.0);	

	test.End();

	}

TInt ThreadFunction(TAny* aParam)

	{

	if (numCpus > 1)

		{

		TInt& core = (static_cast<TThreadParam*>(aParam))->iCpu;

		FailIfError(SetCpuAffinity(core));

		}

	RSemaphore& semaphore = (static_cast<TThreadParam*>(aParam))->iSem;

	semaphore.Wait();

	for (;;)

		{

		// Spin

		}

	}

void EnsureSystemIdle()

	{

	// This test assumes 100% cpu resource is available, so it can fail on

	// windows builds if something else is running in the background.  This

	// function attempts to wait for the system to become idle.

#ifdef __WINS__

	const TInt KMaxWait = 60 * 1000000;

	const TInt KSampleTime = 1 * 1000000;

	const TInt KWaitTime = 5 * 1000000;

	test.Start(_L("Waiting for system to become idle"));

	TInt totalTime = 0;

	TBool idle;

	do

		{

		test(totalTime < KMaxWait);

		TThreadParam threadParam;

		FailIfError((threadParam.iSem).CreateLocal(0));

		threadParam.iCpu = 1;

		RThread thread;

		FailIfError(thread.Create(_L("Thread"), ThreadFunction, 1024, NULL, &threadParam));		

		thread.SetPriority(EPriorityLess);

		thread.Resume();

		User::After(KShortWait); // Pause to allow thread setup

		(threadParam.iSem).Signal();		

		User::After(KSampleTime);

		thread.Suspend();

		TTimeIntervalMicroSeconds time;

		FailIfError(thread.GetCpuTime(time));

		TReal error = (100.0 * Abs(time.Int64() - KSampleTime)) / KSampleTime;

		test.Printf(_L("    time == %ld, error == %f%%\n"), time, error);

		idle = error < 2.0;		

		thread.Kill(KErrNone);

		TRequestStatus status;

		thread.Logon(status);

		User::WaitForRequest(status);

		test(status == KErrNone);

		CLOSE_AND_WAIT(thread);

		(threadParam.iSem).Close();

		if (!idle)

			User::After(KWaitTime);		// Allow system to finish whatever it's doing

		totalTime += KShortWait + KSampleTime + KWaitTime;

		}

	while(!idle);

	test.End();

#endif

	}

//! @SYMTestCaseID t_cputime_1

//! @SYMTestType CT

//! @SYMTestCaseDesc Thread CPU time tests

//! @SYMREQ CR RFID-66JJKX

//! @SYMTestActions Tests cpu time when a thread is put through the various states

//! @SYMTestExpectedResults Reported cpu time increses only when the thread is running

//! @SYMTestPriority High

//! @SYMTestStatus Defined

void TestThreadCpuTime()

	{

	test.Start(_L("CPU thread time unit tests"));

	TThreadParam threadParam;

	FailIfError((threadParam.iSem).CreateLocal(0));

	threadParam.iCpu = 1;

	RThread thread;

	RUndertaker u;

	TInt h;

	TRequestStatus s;

	FailIfError(thread.Create(_L("Thread"), ThreadFunction, 1024, NULL, &threadParam));

	thread.SetPriority(EPriorityLess);

	FailIfError(u.Create());

	FailIfError(u.Logon(s,h));

	test(s==KRequestPending);

	TTimeIntervalMicroSeconds time, time2;

	// Test time is initially zero

	FailIfError(thread.GetCpuTime(time));

	test(time == 0);

	// Test not increased while waiting on semaphore

	thread.Resume();

	User::After(KShortWait);

	FailIfError(thread.GetCpuTime(time));

	test(time < KTolerance); // wait happens in less than 0.5ms

	// Test increases when thread allowed to run

	(threadParam.iSem).Signal();

	User::After(KShortWait);

	FailIfError(thread.GetCpuTime(time));

	test(time > (KShortWait - 2 * KTolerance));

	// Test not increased while suspended

	thread.Suspend();

	FailIfError(thread.GetCpuTime(time));

	User::After(KShortWait);

	FailIfError(thread.GetCpuTime(time2));

	test(time == time2);

	thread.Resume();

	// Test not increased while dead

	thread.Kill(KErrNone);

	User::WaitForRequest(s);	// wait on undertaker since that completes in supervisor thread

	FailIfError(thread.GetCpuTime(time));

	User::After(KShortWait);

	FailIfError(thread.GetCpuTime(time2));

	test(time == time2);

	RThread t;

	t.SetHandle(h);

	test(t.Id()==thread.Id());

	t.Close();

	u.Close();

	thread.Close();

	(threadParam.iSem).Close();

	test.End();

	}

//! @SYMTestCaseID t_cputime_2

//! @SYMTestType CT

//! @SYMTestCaseDesc Thread CPU time tests

//! @SYMREQ CR RFID-66JJKX

//! @SYMTestActions Tests cpu time when multiple threads are running

//! @SYMTestExpectedResults Total time is divided evenly among running threads

//! @SYMTestPriority High

//! @SYMTestStatus Defined

TBool DoTestThreadCpuTime2()  // Returns ETrue if test passed

	{

	test.Start(_L("Testing time shared between threads"));

	if (numCpus > 1)

		{

		test.Printf(_L("** SMP system detected - not testing time shared between threads until load balancing optimized **\n"));

		return ETrue;

		}

	const TInt KMaxThreads = 4;

	TThreadParam threadParam;

	RThread* threads = NULL;

	threads = new(ELeave) RThread[numCpus*KMaxThreads];

	FailIfError((threadParam.iSem).CreateLocal(0));

	TBool pass = ETrue;

	for (TInt numThreads = 1 ; pass && numThreads <= KMaxThreads ; ++numThreads)

		{

		test.Printf(_L("  testing with %d threads on each of %d CPUs:\n"), numThreads, numCpus);

		TInt i, j, k;

		for (i = 0 ; i < numThreads ; ++i)

			{

			for (j = 0 ; j < numCpus ; ++j)

				{

				TBuf<16> name;

				name.AppendFormat(_L("Thread%d%d"), i, j);

				threadParam.iCpu = j;

				k = i+j*KMaxThreads;

				FailIfError(threads[k].Create(name, ThreadFunction, 1024, NULL, &threadParam));

				threads[k].SetPriority(EPriorityLess);

				threads[k].Resume();

				}

			}

		User::After(KShortWait); // Pause to allow thread setup

		(threadParam.iSem).Signal(numThreads*numCpus);		

		User::After(KLongWait);

		for (i = 0 ; i < numThreads ; ++i)

			for (j = 0 ; j < numCpus ; ++j)

				threads[i+j*KMaxThreads].Suspend();

		TInt expected = KLongWait / numThreads;

		for (i = 0 ; i < numThreads ; ++i)

			{

			for (j = 0 ; j < numCpus ; ++j)

				{

				k = i+j*KMaxThreads;

				TTimeIntervalMicroSeconds time;

				FailIfError(threads[k].GetCpuTime(time));

				TReal error = (100.0 * Abs(time.Int64() - expected)) / expected;

				test.Printf(_L("    %d%d: time == %ld, error == %d%%\n"), i, j, time.Int64(), TInt(error));

				if (error >= 5.0)

					pass = EFalse;

				threads[k].Kill(KErrNone);

				TRequestStatus status;

				threads[k].Logon(status);

				User::WaitForRequest(status);

				test(status == KErrNone);

				CLOSE_AND_WAIT(threads[k]);

				}

			}

		}

	(threadParam.iSem).Close();

	test.End();

	return pass;

	}

void TestThreadCpuTime2()

	{

#ifdef __WINS__

	TBool pass = EFalse;

	for (TInt retry = 0 ; !pass && retry < 5 ; ++retry)

		{

		if (retry > 0)

			{

			test.Printf(_L("Test failed, retrying...\n"));

			EnsureSystemIdle();

			}

		pass = DoTestThreadCpuTime2();

		}

	test(pass);

#else

	test(DoTestThreadCpuTime2());

#endif

	}

TInt ThreadFunction2(TAny* aParam)

	{

	TTimeIntervalMicroSeconds& time = *(TTimeIntervalMicroSeconds*)aParam;	

	RThread thread;

	return thread.GetCpuTime(time);

	}

#ifdef __MARM__

void DoTestThreadCpuTime3(TAny* aParam, TExitType aExpectedExitType, TInt aExpectedExitReason)

	{

	RThread thread;

	FailIfError(thread.Create(_L("TestThread"), ThreadFunction2, 1024, NULL, aParam));

	thread.Resume();

	TRequestStatus status;

	thread.Logon(status);

	User::WaitForRequest(status);

	TExitCategoryName exitCat = thread.ExitCategory();

	test.Printf(_L("Thread exit with type == %d, reason == %d, cat == %S\n"),

				thread.ExitType(), thread.ExitReason(), &exitCat);

	test(thread.ExitType() == aExpectedExitType);

	test(thread.ExitReason() == aExpectedExitReason);

	CLOSE_AND_WAIT(thread);

	}

void TestThreadCpuTime3()

	{

	// Test kernel writes the return value back to user-space with the correct permissions

	TTimeIntervalMicroSeconds time;

	DoTestThreadCpuTime3(&time, 			EExitKill, 0);	// ok

	DoTestThreadCpuTime3((TAny*)0, 			EExitPanic, 3);	// null pointer

	DoTestThreadCpuTime3((TAny*)0x64000000, EExitPanic, 3);	// start of kernel data on moving memory model

	DoTestThreadCpuTime3((TAny*)0xc8000000, EExitPanic, 3);	// start of kernel data on moving multiple model

	}

#endif

GLDEF_C TInt E32Main()

	{

	test.Title();

	test.Start(_L("T_CPUTIME"));

	if (numCpus > 1)

		FailIfError(SetCpuAffinity(0));

	TestFastCounter();

	if (GetCpuTimeIsSupported())

		{

		EnsureSystemIdle();

		TestThreadCpuTime();

		TestThreadCpuTime2();

#ifdef __MARM__

		TestThreadCpuTime3();

#endif

		}

	test.End();

	return 0;

	}