/*

* Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).

* All rights reserved.

* This component and the accompanying materials are made available

* under the terms of the License "Eclipse Public License v1.0"

* which accompanies this distribution, and is available

* at the URL "http://www.eclipse.org/legal/epl-v10.html".

*

* Initial Contributors:

* Nokia Corporation - initial contribution.

*

* Contributors:

*

* Description:

*

*/

#include <kernel/kern_priv.h>

#include <template_assp.h>

#include <drivers/gpio.h>

const TInt32		KHwGpioPinMax		= 0;	// TO DO: max pin number this GPIO chip supports

const TInt32		KIntIdGpio		= 0;	// TO DO: need to define which interrupt the GPIO chip is attached to

//

// TO DO: if the GPIO chip doesn't support specific features

// such as debouncing or pin modes, then it may be

// necessary to store them ourselves in an array of GpioPins

// other features such as pin bias or idle configurations

// may be left as KErrNotSupported

//

class GpioPin

	{

public:

   	TGpioIsr		iIsr;	// e.g. we may want to remeber the isr attached to a pin

	TAny *			iPtr;	// argument to pass to isr

	};

static GpioPin	GpioPins[KHwGpioPinMax+1];

static TInt32	GpioInterruptId; // place to store interrupt handle returned from Interrupt::Bind()

/**

GPIO interrupt handler

generic argument (TAny*) is a pointer to the GpioPins array

*/

void GpioIsrDispatch(TAny *aPtr)

	{

	// TO DO: work out which pins have interrupts pending

	// and dispatch the appropriate ISR

	GpioPin	*pins = (GpioPin *)aPtr;

	TUint32 interrupt = 0xff; // TO DO: read gpio pending interupts

	TUint32 enabled = 0x00; // TO DO: read gpio enabled interupts

	TUint32	masked = interrupt & enabled; // TO DO: read masked interrupts

	// check each pin and dispatch ISR if necessary

	for (TInt i = 0; i <= KHwGpioPinMax; i++)

		{

		if ((masked & 0x1) && (pins[i].iIsr != NULL))

			{

			// we have a pending interrupt and a registered ISR

			(*pins[i].iIsr)(pins[i].iPtr); // dispatch this pin's ISR

			}

		masked >>= 1;

		}

	Interrupt::Clear(GpioInterruptId);

	}

EXPORT_C TInt GPIO::SetPinMode

	(

	TInt      aId,

   	TGpioMode aMode

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: store pin mode and return

	return KErrNone;

	}

EXPORT_C TInt GPIO::GetPinMode

	(

	TInt        aId,

   	TGpioMode & aMode

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: set aMode = pin mode

	return KErrNone;

	}

EXPORT_C TInt GPIO::SetPinDirection

	(

	TInt           aId,

   	TGpioDirection aDirection

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax || aDirection == ETriStated)

		{

		return KErrArgument;

		}

	// TO DO: if we support setting the pin direction then do it here

	return KErrNone;

	}

EXPORT_C TInt GPIO::GetPinDirection

	(

	TInt             aId,

   	TGpioDirection & aDirection

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: if we support getting the pin direction then do it here

	return KErrNone;

	}

EXPORT_C TInt GPIO::SetPinBias

	(

	TInt      aId,

   	TGpioBias aBias

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: if we support setting the pin bias then do it here

	return KErrNone;

	}

EXPORT_C TInt GPIO::GetPinBias

	(

	TInt        aId,

   	TGpioBias & aBias

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: if we support getting the pin bias then do it here

	return KErrNone;

	}

EXPORT_C TInt GPIO::SetPinIdleConfigurationAndState

	(

	TInt        aId,

   	TInt		/*aConf*/

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: if we support setting the pin idle config then do it here

	return KErrNone;

	}

EXPORT_C TInt GPIO::GetPinIdleConfigurationAndState

	(

	TInt        aId,

   	TInt	  & aBias

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: if we support getting the pin idle config then do it here

	return KErrNone;

	}

EXPORT_C TInt GPIO::BindInterrupt

	(

	TInt     aId,

   	TGpioIsr aIsr,

   	TAny *   aPtr

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax || aIsr == NULL)

		{

		return KErrArgument;

		}

	if (GpioPins[aId].iIsr != NULL)

		{

		// already bound

		return KErrInUse;

		}

	// record isr and arg bound to this pin

	GpioPins[aId].iIsr = aIsr;

	GpioPins[aId].iPtr = aPtr;

	return KErrNone;

	}

EXPORT_C TInt GPIO::UnbindInterrupt

	(

	TInt aId

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	if (GpioPins[aId].iIsr == NULL)

		{

		// nothing bound

		return KErrGeneral;

		}

	// NULL isr bound to this pin

	GpioPins[aId].iIsr = NULL;

	GpioPins[aId].iPtr = NULL;

	return KErrNone;

	}

EXPORT_C TInt GPIO::EnableInterrupt

	(

	TInt aId

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	if (GpioPins[aId].iIsr == NULL)

		{

		// nothing bound

		return KErrGeneral;

		}

	// TODO: enable interrupts on this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::DisableInterrupt

	(

	TInt aId

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	if (GpioPins[aId].iIsr == NULL)

		{

		// nothing bound

		return KErrGeneral;

		}

	// TODO: disable interrupts on this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::IsInterruptEnabled

	(

	TInt    aId,

   	TBool & aEnable

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	if (GpioPins[aId].iIsr == NULL)

		{

		// nothing bound

		return KErrGeneral;

		}

	// TO DO: are interrupts enabled on this pin ?

	return KErrNone;

	}

EXPORT_C TInt GPIO::ClearInterrupt

	(

	TInt aId

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	if (GpioPins[aId].iIsr == NULL)

		{

		// nothing bound

		return KErrGeneral;

		}

	// TO DO: clear pin interrupt status

	return KErrNone;

	}

EXPORT_C TInt GPIO::GetMaskedInterruptState

	(

	TInt    aId,

   	TBool & aActive

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: set aActive to masked interrupt state

	return KErrNone;

	}

EXPORT_C TInt GPIO::GetRawInterruptState

	(

	TInt    aId,

   	TBool & aActive

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: set aActive to raw (unmasked) interrupt state

	return KErrNone;

	}

EXPORT_C TInt GPIO::SetInterruptTrigger

	(

	TInt                  aId,

   	TGpioDetectionTrigger aTrigger

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: set interrupt trigger on this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::EnableWakeup

	(

	TInt aId

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: enable wakeup on this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::DisableWakeup

	(

	TInt aId

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: disable wakeup on this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::IsWakeupEnabled

	(

	TInt    aId,

   	TBool & aEnable

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: set aEnable wakeup state for this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::SetWakeupTrigger

	(

	TInt                  aId,

   	TGpioDetectionTrigger aTrigger

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: set wakeup trigger on this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::SetDebounceTime

	(

	TInt aId,

   	TInt aTime

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: set debounce time for this pin

	// it may be necessary to emulate debouncing ourselves

	return KErrNone;

	}

EXPORT_C TInt GPIO::GetDebounceTime

	(

	TInt   aId,

   	TInt & aTime

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: get debounce time for this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::GetInputState

	(

	TInt         aId,

   	TGpioState & aState

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: read the input state of this pin

	// if debouncing is handled by the driver here

	// is where we will need to work out what the

	// debounced state is

	return KErrNone;

	}

EXPORT_C TInt GPIO::SetOutputState

	(

	TInt       aId,

   	TGpioState aState

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: set the output state of this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::GetOutputState

	(

	TInt         aId,

   	TGpioState & aState

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: get the output state of this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::GetInputState

	(

	TInt                  aId,

   	TGpioCallback		* aCb

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: get the input state of this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::SetOutputState

	(

	TInt                  aId,

	TGpioState			  aState,

   	TGpioCallback		* aCb

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: set the ouput state of this pin

	return KErrNone;

	}

EXPORT_C TInt GPIO::StaticExtension

	(

	TInt	  aId,

	TInt	  aCmd,

	TAny	* aArg1,

	TAny	* aArg2

	)

	{

	if (aId < 0 || aId > KHwGpioPinMax)

		{

		return KErrArgument;

		}

	// TO DO: call the appropriate static extension if supported

	return KErrNotSupported;

	}

//

// entry point for GPIO setup

//

DECLARE_STANDARD_EXTENSION()

	{

	// initialise GPIO pins array (if necessary)

	for (TInt32 i = 0; i <= KHwGpioPinMax; i++)

		{

		GpioPins[i].iIsr = NULL;

		GpioPins[i].iPtr = NULL;

		}

	// bind and enable GPIO Isr

	// NB Interrupt::Bind() now returns a handle (-ve value means an error)

	TInt r = Interrupt::Bind(KIntIdGpio, GpioIsrDispatch, &GpioPins[0]);

	if (r < 0)