// Copyright (c) 2004-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// template\template_variant\inc\lffsdev.h

// Header file for a Logging Flash file system (LFFS) physical device driver 

// for a standard Common Flash Interface (CFI) based NOR flash chip.

// This file is part of the Template Base port

// 

//

#ifndef __LFFSDEV_H__

#define __LFFSDEV_H__

#include <drivers/flash_media.h>

#include <template_assp.h>

#define FLASH_FAULT()	Kern::Fault("LFFSDEV",__LINE__)

//

// TO DO: (mandatory)

//

// Define the bus width (typically this will be 16 or 32)

// and the number of devices spanning the bus (typically 1, 2 or 4).

//

// Possible value are :	FLASH_BUS_WIDTH	FLASH_BUS_DEVICES

//						32				1					1 x 32 bit device

//						32				2					2 x 16 bit devices

//						32				4					4 x 8  bit devices

//						16				1					1 x 16 bit device

//						16				2					2 x 8  bit devices

//

//

#define FLASH_BUS_WIDTH 32		// EXAMPLE_ONLY

#define FLASH_BUS_DEVICES 2		// EXAMPLE_ONLY

#if FLASH_BUS_WIDTH == 32

	#define TFLASHWORD TUint32

	#define FLASH_BYTES_TO_WORDS(aNumBytes) ((aNumBytes) >> 2)

	#define FLASH_ADDRESS_IN_BYTES(aWordAddr) ((aWordAddr) << 2)

	#define FLASH_ERASE_WORD_VALUE 0xFFFFFFFF

#elif FLASH_BUS_WIDTH == 16

	#define TFLASHWORD TUint16

	#define FLASH_BYTES_TO_WORDS(aNumBytes) ((aNumBytes) >> 1)

	#define FLASH_ADDRESS_IN_BYTES(aWordAddr) ((aWordAddr) << 1)

	#define FLASH_ERASE_WORD_VALUE 0xFFFF

#else	// FLASH_BUS_WIDTH == 8

	#define TFLASHWORD TUint8

	#define FLASH_BYTES_TO_WORDS(aNumBytes) (aNumBytes)

	#define FLASH_ADDRESS_IN_BYTES(aWordAddr) (aWordAddr)

	#define FLASH_ERASE_WORD_VALUE 0xFF

#endif

#define BUS_WIDTH_PER_DEVICE (FLASH_BUS_WIDTH / FLASH_BUS_DEVICES)

/********************************************

Common Flash Interface (CFI) definitions for various

combinations of FLASH_BUS_WIDTH and FLASH_BUS_DEVICES

 ********************************************/

//

// TO DO: (optional)

// Delete the definitions that are not applicable to your device

//

#if FLASH_BUS_WIDTH == 32 && FLASH_BUS_DEVICES == 1			// 1x32bit devices on 32bit bus

const TFLASHWORD KCmdReadArray				= 0x000000FF;	// Set read array command

const TFLASHWORD KCmdReadStatusRegister		= 0x00000070;	// Read status register command

const TFLASHWORD KCmdClearStatusRegister	= 0x00000050;	// Clear status register error bits command

const TFLASHWORD KCmdWriteToBuffer			= 0x000000E8;	// Write to buffer setup command

const TFLASHWORD KCmdBlockErase				= 0x00000020;	// Block erase command

const TFLASHWORD KCmdEraseSuspend			= 0x000000B0;	// Erase suspend command

const TFLASHWORD KCmdEraseResume			= 0x000000D0;	// Erase resume command (actually a confirm)

const TFLASHWORD KCmdConfirm				= 0x000000D0;	// Confirm command

const TFLASHWORD KCmdReadIdentifiers		= 0x00000090;	// Read Flash identifiers command

const TFLASHWORD KCmdReadQuery				= 0x00000098;	// Read Flash Query info command

const TFLASHWORD KStsReady					= 0x00000080;	// Ready bit

const TFLASHWORD KStsSuspended				= 0x00000040;	// Suspend bit

const TFLASHWORD KStsEraseError				= 0x00000020;	// Erase error bit

const TFLASHWORD KStsWriteError				= 0x00000010;	// Write error bit

const TFLASHWORD KStsVppLow					= 0x00000008;	// Vpp low bit

const TFLASHWORD KStsReserved				= 0x00000004;	// Reserved bit (not used)

const TFLASHWORD KStsLocked					= 0x00000002;	// Locked bit

const TFLASHWORD KStsReserved2				= 0x00000001;	// Reserved bit

#elif FLASH_BUS_WIDTH == 32 && FLASH_BUS_DEVICES == 2		// 2x16bit devices on 32bit bus

const TFLASHWORD KCmdReadArray				= 0x00FF00FF;	// Set read array command

const TFLASHWORD KCmdReadStatusRegister		= 0x00700070;	// Read status register command

const TFLASHWORD KCmdClearStatusRegister	= 0x00500050;	// Clear status register error bits command

const TFLASHWORD KCmdWriteToBuffer			= 0x00E800E8;	// Write to buffer setup command

const TFLASHWORD KCmdBlockErase				= 0x00200020;	// Block erase command

const TFLASHWORD KCmdEraseSuspend			= 0x00B000B0;	// Erase suspend command

const TFLASHWORD KCmdEraseResume			= 0x00D000D0;	// Erase resume command (actually a confirm)

const TFLASHWORD KCmdConfirm				= 0x00D000D0;	// Confirm command

const TFLASHWORD KCmdReadIdentifiers		= 0x00900090;	// Read Flash identifiers command

const TFLASHWORD KCmdReadQuery				= 0x00980098;	// Read Flash Query info command

const TFLASHWORD KStsReady					= 0x00800080;	// Ready bit

const TFLASHWORD KStsSuspended				= 0x00400040;	// Suspend bit

const TFLASHWORD KStsEraseError				= 0x00200020;	// Erase error bit

const TFLASHWORD KStsWriteError				= 0x00100010;	// Write error bit

const TFLASHWORD KStsVppLow					= 0x00080008;	// Vpp low bit

const TFLASHWORD KStsReserved				= 0x00040004;	// Reserved bit (not used)

const TFLASHWORD KStsLocked					= 0x00020002;	// Locked bit

const TFLASHWORD KStsReserved2				= 0x00010001;	// Reserved bit

#elif FLASH_BUS_WIDTH == 32 && FLASH_BUS_DEVICES == 4		// 4x8bit devices on 32bit bus

const TFLASHWORD KCmdReadArray				= 0xFFFFFFFF;	// Set read array command

const TFLASHWORD KCmdReadStatusRegister		= 0x70707070;	// Read status register command

const TFLASHWORD KCmdClearStatusRegister	= 0x50505050;	// Clear status register error bits command

const TFLASHWORD KCmdWriteToBuffer			= 0xE8E8E8E8;	// Write to buffer setup command

const TFLASHWORD KCmdBlockErase				= 0x20202020;	// Block erase command

const TFLASHWORD KCmdEraseSuspend			= 0xB0B0B0B0;	// Erase suspend command

const TFLASHWORD KCmdEraseResume			= 0xD0D0D0D0;	// Erase resume command (actually a confirm)

const TFLASHWORD KCmdConfirm				= 0xD0D0D0D0;	// Confirm command

const TFLASHWORD KCmdReadIdentifiers		= 0x90909090;	// Read Flash identifiers command

const TFLASHWORD KCmdReadQuery				= 0x98989898;	// Read Flash Query info command

const TFLASHWORD KStsReady					= 0x80808080;	// Ready bit

const TFLASHWORD KStsSuspended				= 0x40404040;	// Suspend bit

const TFLASHWORD KStsEraseError				= 0x20202020;	// Erase error bit

const TFLASHWORD KStsWriteError				= 0x10101010;	// Write error bit

const TFLASHWORD KStsVppLow					= 0x08080808;	// Vpp low bit

const TFLASHWORD KStsReserved				= 0x04040404;	// Reserved bit (not used)

const TFLASHWORD KStsLocked					= 0x02020202;	// Locked bit

const TFLASHWORD KStsReserved2				= 0x01010101;	// Reserved bit

#elif FLASH_BUS_WIDTH == 16 && FLASH_BUS_DEVICES == 1	// 1x16bit devices on 16bit bus

const TFLASHWORD KCmdReadArray				= 0x00FF;	// Set read array command

const TFLASHWORD KCmdReadStatusRegister		= 0x0070;	// Read status register command

const TFLASHWORD KCmdClearStatusRegister	= 0x0050;	// Clear status register error bits command

const TFLASHWORD KCmdWriteToBuffer			= 0x00E8;	// Write to buffer setup command

const TFLASHWORD KCmdBlockErase				= 0x0020;	// Block erase command

const TFLASHWORD KCmdEraseSuspend			= 0x00B0;	// Erase suspend command

const TFLASHWORD KCmdEraseResume			= 0x00D0;	// Erase resume command (actually a confirm)

const TFLASHWORD KCmdConfirm				= 0x00D0;	// Confirm command

const TFLASHWORD KCmdReadIdentifiers		= 0x0090;	// Read Flash identifiers command

const TFLASHWORD KCmdReadQuery				= 0x0098;	// Read Flash Query info command

const TFLASHWORD KStsReady					= 0x0080;	// Ready bit

const TFLASHWORD KStsSuspended				= 0x0040;	// Suspend bit

const TFLASHWORD KStsEraseError				= 0x0020;	// Erase error bit

const TFLASHWORD KStsWriteError				= 0x0010;	// Write error bit

const TFLASHWORD KStsVppLow					= 0x0008;	// Vpp low bit

const TFLASHWORD KStsReserved				= 0x0004;	// Reserved bit (not used)

const TFLASHWORD KStsLocked					= 0x0002;	// Locked bit

const TFLASHWORD KStsReserved2				= 0x0001;	// Reserved bit

#elif FLASH_BUS_WIDTH == 16 && FLASH_BUS_DEVICES == 2	// 2x8bit devices on 16bit bus

const TFLASHWORD KCmdReadArray				= 0xFFFF;	// Set read array command

const TFLASHWORD KCmdReadStatusRegister		= 0x7070;	// Read status register command

const TFLASHWORD KCmdClearStatusRegister	= 0x5050;	// Clear status register error bits command

const TFLASHWORD KCmdWriteToBuffer			= 0xE8E8;	// Write to buffer setup command

const TFLASHWORD KCmdBlockErase				= 0x2020;	// Block erase command

const TFLASHWORD KCmdEraseSuspend			= 0xB0B0;	// Erase suspend command

const TFLASHWORD KCmdEraseResume			= 0xD0D0;	// Erase resume command (actually a confirm)

const TFLASHWORD KCmdConfirm				= 0xD0D0;	// Confirm command

const TFLASHWORD KCmdReadIdentifiers		= 0x9090;	// Read Flash identifiers command

const TFLASHWORD KCmdReadQuery				= 0x9898;	// Read Flash Query info command

const TFLASHWORD KStsReady					= 0x8080;	// Ready bit

const TFLASHWORD KStsSuspended				= 0x4040;	// Suspend bit

const TFLASHWORD KStsEraseError				= 0x2020;	// Erase error bit

const TFLASHWORD KStsWriteError				= 0x1010;	// Write error bit

const TFLASHWORD KStsVppLow					= 0x0808;	// Vpp low bit

const TFLASHWORD KStsReserved				= 0x0404;	// Reserved bit (not used)

const TFLASHWORD KStsLocked					= 0x0202;	// Locked bit

const TFLASHWORD KStsReserved2				= 0x0101;	// Reserved bit

#endif

// address at which to issue the Query command

const TUint32 KCmdReadQueryOffset				= 0x55;	

const TUint32 KQueryOffsetQRY					= 0x10;

const TUint32 KQueryOffsetSizePower				= 0x27;

const TUint32 KQueryOffsetWriteBufferSizePower	= 0x2A;

const TUint32 KQueryOffsetErasePartitions		= 0x2C;

const TUint32 KQueryOffsetEraseBlockCount		= 0x2D;

const TUint32 KQueryOffsetEraseBlockSize		= 0x2F;

/********************************************

 * Driver definitions

 ********************************************/

const TInt KMaxWriteSetupAttempts		= 8;

const TInt KMaxEraseResumeAttempts		= 32;

const TInt KDataBufSize=1024;

// TO DO: (mandatory)

// Define the following timeouts in terms of timer ticks

// This is only example code... you may need to modify it for your hardware

// The examples given here assume a timer clock frequency of 3.6864MHz

const TUint32 KFlashWriteTimerPeriod =		1500;	// 1500 ticks @ 3.6864MHz = 406us

const TUint32 KFlashWriteTimerRetries =		3;		// total 1.2ms

const TUint32 KFlashSuspendTimerPeriod =	1500;	// 1500 ticks @ 3.6864MHz = 406us

const TUint32 KFlashSuspendTimerRetries =	3;		// total 1.2ms

const TUint32 KFlashEraseTimerPeriod =		100000;	// 100000 ticks @ 3.6864MHz = 27ms

const TUint32 KFlashEraseTimerRetries =		100;	// total 2.7sec

const TInt	  KEraseSuspendHoldOffTime =	130;	// 130ms

/********************************************

 * Media driver class

 ********************************************/

//

// TO DO: (optional)

//

// Add any private functions and data you require

//

class DMediaDriverFlashTemplate : public DMediaDriverFlash

	{

public:

	enum TWriteState {EWriteIdle=0,EWriting=1};

	enum TEraseState {EEraseIdle=0,EErase=1,EEraseNoSuspend=2,ESuspendPending=3,ESuspending=4,ESuspended=5};

	enum TEvent {EPollTimer=1,ETimeout=2,EHoldOffEnd=4};

	DMediaDriverFlashTemplate(TInt aMediaId);

	// replacing pure virtual - FLASH device specific stuff

	virtual TInt Initialise();

	virtual TUint32 EraseBlockSize();

	virtual TUint32 TotalSize();

	virtual TInt DoRead();

	virtual TInt DoWrite();

	virtual TInt DoErase();

private:

	void IPostEvents(TUint32 aEvents);

	void HandleEvents(TUint32 aEvents);

	void ClearEvents(TUint32 aEvents);

	void StartPollTimer(TUint32 aPeriod, TUint32 aRetries);

	void StartPollTimer();

	void StartHoldOffTimer();

	void CancelHoldOffTimer();

	void StartErase();

	void SuspendErase();

	void WriteStep();

	void DoFlashReady(TUint32 aStatus);

	void DoFlashTimeout();

	void StartPendingRW();

	TUint32 ReadQueryData8(TUint32 aOffset);

	TUint32 ReadQueryData16(TUint32 aOffset);

	void ReadFlashParameters();

	static void Isr(TAny* aPtr);

	static void HoldOffTimerFn(TAny* aPtr);

	static void EventDfc(TAny* aPtr);

private:

	TWriteState iWriteState;

	TEraseState iEraseState;

	TLinAddr iBase;

	TUint32 iEraseBlockSize;

	TUint32 iTotalSize;

	TUint32 iWriteBufferSize;

	TUint32 iWritePos;

	TInt iDataBufPos;

	TInt iDataBufRemain;

	TUint8* iData;		// data being written

	TUint32 iErasePos;

	NTimer iHoldOffTimer;

	TUint32 iEvents;

	TDfc iEventDfc;

	TUint32 iPollPeriod;

	TUint32 iPollRetries;

	TUint32 iEraseError;

	TInt iWriteError;

	TInt iEraseAttempt;

	DPlatChunkHw* iFlashChunk;

	};

#endif