1 //

     2 // Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

     3 // All rights reserved.

     4 // This component and the accompanying materials are made available

     5 // under the terms of "Eclipse Public License v1.0"

     6 // which accompanies this distribution, and is available

     7 // at the URL "http://www.eclipse.org/legal/epl-v10.html".

     8 //

     9 // Initial Contributors:

    10 // Nokia Corporation - initial contribution.

    11 //

    12 // Contributors:

    13 //

    14 // Description: 

    15 //

    16 //! @file

    17 //! @SYMTestSuiteName		PBASE-F32-RFS-Mounts-PublicApi-RAM

    18 //! @SYMScriptTestEnvironment	This test script requires a basic ROM.

    19 //! @SYMScriptAuthor 		Oleg Kuznetsov

    20 //! @SYMScriptDescription	The test script contains API mounting related tests for RFs functions that perform operations on a RAM drive.

    21 

    22 LOAD_SUITE	T_Sfsrv

    23 

    24 

    25 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0002

    26 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0002

    27 //! @SYMAPI			RFs

    28 //! @SYMTestCaseDesc		Functions MountFileSystem() (MountFileSystem(const TDesC& aFileSystemName,TInt aDrive) 

    29 //!				and MountFileSystem(const TDesC& aFileSystemName,TInt aDrive, TBool aIsSync) versions) and DismountFileSystem() test.

    30 //!				The test assumes that the tested file system is already mounted onto the tested drive.

    31 //!				Uses API elements:  MountFileSystem(), DismountFileSystem(), FileSystemName().

    32 //! @SYMTestActions		1. Call Connect() method.

    33 //!				2. Call FileSystemName() for a drive where a file system was mounted.

    34 //!				3. Call DismountFileSystem() providing the file system name and the drive number.

    35 //!				4. Call MountFileSystem() passing the file system name, an enabled free drive number.

    36 //!				5. Call DismountFileSystem() providing the name of the file system and the drive number.

    37 //!				6. Call MountFileSystem() passing the file system name, an enabled free drive number and ETrue as a synchronization parameter.

    38 //!				7. Call DismountFileSystem() providing the name of the file system and the drive number.

    39 //!				8. Call MountFileSystem() passing the file system name, an enabled free drive number and EFalse as a synchronization parameter.

    40 //!				9. Call Close() method.

    41 //! @SYMTestStatus		Implemented

    42 //! @SYMTestPriority		Critical

    43 //! @SYMTestExpectedResults	All MountFileSystem() and DismountFileSystem() calls return KErrNone.

    44 //! @SYMTestType		CIT

    45 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

    46 		CREATE_OBJECT	RFs	RFs1

    47 		COMMAND		RFs1	new

    48 		COMMAND		RFs1	Connect

    49 		COMMAND		RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0002-001-FileSystemName_command03

    50 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0002-001-DismountFileSystem_command04

    51 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0002-001-MountFileSystem_command05

    52 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0002-001-DismountFileSystem_command06

    53 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0002-001-MountFileSystem_command07

    54 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0002-001-DismountFileSystem_command08

    55 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0002-001-MountFileSystem_command09

    56 		COMMAND		RFs1	Close

    57 		COMMAND		RFs1	~		

    58 	END_TEST_BLOCK	

    59 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0002

    60 

    61 

    62 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0004

    63 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0004

    64 //! @SYMAPI			RFs

    65 //! @SYMTestCaseDesc		Functions MountFileSystem() (MountFileSystem(const TDesC& aFileSystemName,const TDesC& aExtensionName,TInt aDrive)

    66 //!				and MountFileSystem(const TDesC& aFileSystemName,const TDesC& aExtensionName,TInt aDrive, TBool aIsSync) versions) test. 

    67 //!				The test assumes that the tested file system is already mounted onto the tested drive.

    68 //!				The test requires a file system extension plug-in.

    69 //!				Uses API elements:  AddExtension(), MountFileSystem(), DismountFileSystem(), RemoveExtension(), FileSystemName().

    70 //! @SYMTestActions		1. Call Connect() method.

    71 //!				2. Call FileSystemName() for a drive where a file system was mounted.

    72 //!				3. Call DismountFileSystem() providing the file system name and the drive number.

    73 //!				4. Call AddExtension() providing the file name of a file system extension plug-in as an argument.

    74 //!				5. Call MountFileSystem() passing the file system name, plug-in extension name and an enabled free drive number.

    75 //!				6. Call DismountFileSystem() providing the file system name and the drive number.

    76 //!				7. Call MountFileSystem() passing the file system name, plug-in extension name, an enabled free drive number and ETrue as a 

    77 //!					synchronization parameter.

    78 //!				8. Call DismountFileSystem() providing the file system name and the drive number.

    79 //!				9. Call MountFileSystem() passing the file system name, plug-in extension name, an enabled free drive number and EFalse 

    80 //!					as a synchronization parameter.

    81 //!				10. Call DismountFileSystem() providing the file system name and the drive number.

    82 //!				11. Call RemoveExtension() providing the name of the plug-in file system extension as an argument.

    83 //!				12. Call MountFileSystem() passing the file system name, the drive number and EFalse as a synchronization parameter.

    84 //!				13. Call Close() method.

    85 //! @SYMTestStatus		Implemented

    86 //! @SYMTestPriority		Critical

    87 //! @SYMTestExpectedResults	All MountFileSystem() and DismountFileSystem() calls return KErrNone.

    88 //! @SYMTestType		CIT

    89 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

    90 		CREATE_OBJECT	RFs	RFs1

    91 		COMMAND		RFs1	new

    92 		COMMAND		RFs1	Connect

    93 		COMMAND		RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0004-001-FileSystemName_command03

    94 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0004-001-DismountFileSystem_command04

    95 		COMMAND		RFs1	AddExtension		PBASE-F32-RFS-PublicApi-0004-001-AddExtension_command05

    96 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0004-001-MountFileSystem_command06

    97 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0004-001-DismountFileSystem_command07

    98 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0004-001-MountFileSystem_command08

    99 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0004-001-DismountFileSystem_command09

   100 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0004-001-MountFileSystem_command10

   101 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0004-001-DismountFileSystem_command11

   102 		COMMAND		RFs1	RemoveExtension		PBASE-F32-RFS-PublicApi-0004-001-RemoveExtension_command12

   103 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0004-001-MountFileSystem_command13

   104 		COMMAND		RFs1	Close

   105 		COMMAND		RFs1	~		

   106 	END_TEST_BLOCK	

   107 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0004

   108 

   109 

   110 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0005

   111 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0005

   112 //! @SYMAPI			RFs

   113 //! @SYMTestCaseDesc		Functions MountExtension() and DismountExtension() test. The test requires a file system extension plug-in.

   114 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   115 //!				Uses API elements:  AddExtension(), MountExtension(), DismountExtension(), RemoveExtension().

   116 //! @SYMTestActions		1. Call Connect() method.

   117 //!				2. Call AddExtension() providing the file name of a file system extension plug-in as an argument.

   118 //!				3. Call MountExtension() passing the plug-in extension name and an enabled free drive number with mounted file system.

   119 //!				4. Call DismountExtension() providing the name of the plug-in extension and the drive number.

   120 //!				5. Call RemoveExtension() providing the name of the plug-in file system extension as an argument.

   121 //!				6. Call Close() method.

   122 //! @SYMTestStatus		Implemented

   123 //! @SYMTestPriority		Critical

   124 //! @SYMTestExpectedResults	Both MountExtension() and DismountExtension() return KErrNone.

   125 //! @SYMTestType		CIT

   126 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   127 		CREATE_OBJECT	RFs	RFs1

   128 		COMMAND		RFs1	new

   129 		COMMAND		RFs1	Connect

   130 		COMMAND		RFs1	AddExtension		PBASE-F32-RFS-PublicApi-0005-001-AddExtension_command03

   131 		COMMAND		RFs1	MountExtension		PBASE-F32-RFS-PublicApi-0005-001-MountExtension_command04

   132 		COMMAND		RFs1	DismountExtension	PBASE-F32-RFS-PublicApi-0005-001-DismountExtension_command05

   133 		COMMAND		RFs1	RemoveExtension		PBASE-F32-RFS-PublicApi-0005-001-RemoveExtension_command06

   134 		COMMAND		RFs1	Close

   135 		COMMAND		RFs1	~		

   136 	END_TEST_BLOCK	

   137 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0005

   138 

   139 

   140 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0006

   141 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0006

   142 //! @SYMAPI			RFs

   143 //! @SYMTestCaseDesc		Function MountFileSystemAndScan() test. 

   144 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   145 //!				The test requires a file system extension plug-in.

   146 //!				Uses API elements:  AddExtension(), RemoveExtension(), MountFileSystemAndScan(), DismountFileSystem(), FileSystemName().

   147 //! @SYMTestActions		1. Call Connect() method.

   148 //!				2. Call FileSystemName() for a drive where a file system was mounted.

   149 //!				3. Call DismountFileSystem() providing the file system name and the drive number.

   150 //!				4. Call AddExtension() providing the file name of a file system extension plug-in as an argument.

   151 //!				5. Call MountFileSystemAndScan() passing the file system name and drive number. 

   152 //!					Check that on return aIsMountSuccess parameter is set to ETrue.

   153 //!				6. Call DismountFileSystem() providing the name of the file system and the drive number.

   154 //!				7. Call MountFileSystemAndScan() passing the file system name , plug-in extension name and drive number.

   155 //!					Check that on return aIsMountSuccess parameter is set to ETrue.

   156 //!				8. Call DismountFileSystem() providing the name of the file system and the drive number.

   157 //!				9. Call RemoveExtension() providing the name of the file system extension as an argument.

   158 //!				10. Call MountFileSystem() passing the file system name and the drive number.

   159 //!				11. Call Close() method.

   160 //! @SYMTestStatus		Implemented

   161 //! @SYMTestPriority		Critical

   162 //! @SYMTestExpectedResults	All MountFileSystemAndScan() calls return KErrNone and set output argument aIsMountSuccess to ETrue on return.

   163 //! @SYMTestType		CIT

   164 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   165 		CREATE_OBJECT	RFs	RFs1

   166 		COMMAND		RFs1	new

   167 		COMMAND		RFs1	Connect

   168 		COMMAND		RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0006-001-FileSystemName_command03

   169 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0006-001-DismountFileSystem_command04

   170 		COMMAND		RFs1	AddExtension		PBASE-F32-RFS-PublicApi-0006-001-AddExtension_command05

   171 		COMMAND		RFs1	MountFileSystemAndScan	PBASE-F32-RFS-PublicApi-0006-001-MountFileSystemAndScan_command06

   172 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0006-001-DismountFileSystem_command07

   173 		COMMAND		RFs1	MountFileSystemAndScan	PBASE-F32-RFS-PublicApi-0006-001-MountFileSystemAndScan_command08

   174 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0006-001-DismountFileSystem_command09

   175 		COMMAND		RFs1	RemoveExtension		PBASE-F32-RFS-PublicApi-0006-001-RemoveExtension_command10

   176 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0006-001-MountFileSystem_command11

   177 		COMMAND		RFs1	Close

   178 		COMMAND		RFs1	~		

   179 	END_TEST_BLOCK	

   180 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0006

   181 

   182 

   183 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0008

   184 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0008

   185 //! @SYMAPI			RFs

   186 //! @SYMTestCaseDesc		Function ExtensionName() test. The test requires a file system extension plug-in.

   187 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   188 //!				Uses API elements:  AddExtension(), MountExtension(), ExtensionName(), RemoveExtension().

   189 //! @SYMTestActions		1. Call Connect() method.

   190 //!				2. Call AddExtension() providing the file name of a file system extension plug-in as an argument.

   191 //!				3. Call MountExtension() passing the plug-in extension name and an enabled free drive number.

   192 //!				4. Call ExtensionName() passing the drive number as argument and position 0. Check that aExtensionName parameter 

   193 //!					is set to the same as a real name of the plug-in extension on return.

   194 //!				5. Call RemoveExtension() providing the name of the plug-in file system extension as an argument.

   195 //!				6. Call Close() method.

   196 //! @SYMTestStatus		Implemented

   197 //! @SYMTestPriority		Critical

   198 //! @SYMTestExpectedResults	ExtensionName() returns KErrNone and the real name of the extension through the aExtensionName output argument.

   199 //! @SYMTestType		CIT

   200 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   201 		CREATE_OBJECT	RFs	RFs1

   202 		COMMAND		RFs1	new

   203 		COMMAND		RFs1	Connect

   204 		COMMAND		RFs1	AddExtension		PBASE-F32-RFS-PublicApi-0008-001-AddExtension_command03

   205 		COMMAND		RFs1	MountExtension		PBASE-F32-RFS-PublicApi-0008-001-MountExtension_command04

   206 		COMMAND		RFs1	ExtensionName		PBASE-F32-RFS-PublicApi-0008-001-ExtensionName_command05

   207 		COMMAND		RFs1	DismountExtension	PBASE-F32-RFS-PublicApi-0008-001-DismountExtension_command06

   208 		COMMAND		RFs1	RemoveExtension		PBASE-F32-RFS-PublicApi-0008-001-RemoveExtension_command07

   209 		COMMAND		RFs1	Close

   210 		COMMAND		RFs1	~		

   211 	END_TEST_BLOCK	

   212 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0008

   213 

   214 

   215 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0009

   216 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0009

   217 //! @SYMAPI			RFs

   218 //! @SYMTestCaseDesc		Function RemountDrive() test.

   219 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   220 //!				Uses API elements:  RemountDrive().

   221 //! @SYMTestActions		1. Call Connect() method.

   222 //!				2. Call RemountDrive() passing the drive (with a file system on) and flags 0 as arguments. 

   223 //!				3. Call Close() method.

   224 //! @SYMTestStatus		Implemented

   225 //! @SYMTestPriority		Critical

   226 //! @SYMTestExpectedResults	RemountDrive() returns KErrNone.

   227 //! @SYMTestType		CIT

   228 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   229 		CREATE_OBJECT	RFs	RFs1

   230 		COMMAND		RFs1	new

   231 		COMMAND		RFs1	Connect

   232 		COMMAND		RFs1	RemountDrive		PBASE-F32-RFS-PublicApi-0009-001-RemountDrive_command03

   233 		COMMAND		RFs1	Close

   234 		COMMAND		RFs1	~		

   235 	END_TEST_BLOCK	

   236 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0009

   237 

   238 

   239 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0010

   240 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0010

   241 //! @SYMAPI			RFs

   242 //! @SYMTestCaseDesc		Function NotifyDismount() test.

   243 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   244 //!				Uses API elements:  NotifyDismount(), MountFileSystem(), DismountFileSystem(), FileSystemName().

   245 //! @SYMTestActions		1. Create a RFs session and call it's Connect() function.

   246 //!				2. Create another RFs session and call it's Connect() function.

   247 //!				3. Call first session's FileSystemName() for a drive where a file system was mounted.

   248 //!				4. Call second session's NotifyDismount() providing the drive number and mode value EFsDismountRegisterClient and starts waiting for a notification on the background.

   249 //!				5. Call first session's NotifyDismount() providing the drive number and mode value EFsDismountNotifyClients and starts waiting for a notification on the background.

   250 //!				6. Call second session's AllowDismount() providing the drive number.

   251 //!				7. Call first session's MountFileSystem() passing the file system name and the drive number to restore the file system on the drive.

   252 //!				8. Call Close() of both sessions.

   253 //! @SYMTestStatus		Implemented

   254 //! @SYMTestPriority		Critical

   255 //! @SYMTestExpectedResults	See actions.

   256 //! @SYMTestType		CIT

   257 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   258 		CREATE_OBJECT	RFs	RFs1

   259 		CREATE_OBJECT	RFs	RFs2

   260 		COMMAND		RFs1	new

   261 		COMMAND		RFs1	Connect

   262 		COMMAND		RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0010-001-FileSystemName_command03

   263 		COMMAND		RFs2	new

   264 		COMMAND		RFs2	Connect

   265 		COMMAND		RFs2	NotifyDismount		PBASE-F32-RFS-PublicApi-0010-001-NotifyDismount_command07

   266 		COMMAND		RFs1	NotifyDismount		PBASE-F32-RFS-PublicApi-0010-001-NotifyDismount_command09

   267 		COMMAND		RFs2	AllowDismount		PBASE-F32-RFS-PublicApi-0010-001-AllowDismount_command12

   268 			OUTSTANDING

   269 				OUTSTANDING

   270 		COMMAND		RFs2	Close

   271 		COMMAND		RFs2	~

   272 			OUTSTANDING	

   273 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0010-001-MountFileSystem_command17

   274 		COMMAND		RFs1	Close

   275 		COMMAND		RFs1	~

   276 	END_TEST_BLOCK	

   277 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0010

   278 

   279 

   280 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0011

   281 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0011

   282 //! @SYMAPI			RFs

   283 //! @SYMTestCaseDesc		Function NotifyDismountCancel(TRequestStatus& aStat) test.

   284 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   285 //!				Uses API elements:  NotifyDismountCancel(), NotifyDismount(), MountFileSystem(), FileSystemName().

   286 //! @SYMTestActions		1. Call Connect() method.

   287 //!				2. Call FileSystemName() for a drive where a file system was mounted.

   288 //!				3. Call NotifyDismount() providing the drive number and mode value EFsDismountRegisterClient and starts waiting for a notification on the background.

   289 //!				4. Call NotifyDismountCancel() providing the same TRequestStatus as in previous call.

   290 //!				5. Call NotifyDismount() providing the drive number and mode value EFsDismountNotifyClients and starts waiting for a notification on the background.

   291 //!				6. Call MountFileSystem() passing the file system name and the drive number.

   292 //!				7. Call Close() of both sessions.

   293 //! @SYMTestStatus		Implemented

   294 //! @SYMTestPriority		Critical

   295 //! @SYMTestExpectedResults	KErrCancel(-3)

   296 //! @SYMTestType		CIT

   297 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   298 		CREATE_OBJECT	RFs	RFs1

   299 		COMMAND			RFs1	new

   300 		COMMAND			RFs1	Connect

   301 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0011-001-FileSystemName_command03

   302 		COMMAND	!AsyncError=-3	RFs1	NotifyDismount		PBASE-F32-RFS-PublicApi-0011-001-NotifyDismount_command04

   303 		COMMAND			RFs1	NotifyDismountCancel	PBASE-F32-RFS-PublicApi-0011-001-NotifyDismountCancel_command05

   304 		OUTSTANDING	

   305 		COMMAND			RFs1	NotifyDismount		PBASE-F32-RFS-PublicApi-0011-001-NotifyDismount_command07

   306 		OUTSTANDING	

   307 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0011-001-MountFileSystem_command09

   308 		COMMAND			RFs1	Close

   309 		COMMAND			RFs1	~

   310 	END_TEST_BLOCK	

   311 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0011

   312 

   313 

   314 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0017

   315 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0017

   316 //! @SYMAPI			RFs

   317 //! @SYMTestCaseDesc		Function SwapFileSystem() test.

   318 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   319 //!				Uses API elements:  SwapFileSystem()

   320 //! @SYMTestActions		1. Call Connect() method.

   321 //!				2. Call FileSystemName() for a drive where a file system was mounted.

   322 //!				3. Call DismountFileSystem() providing the file system name and the drive number.

   323 //!				4. Call MountFileSystem() passing the file system name, an enabled free drive number and ETrue as a synchronization parameter.

   324 //!				5. Call SwapFileSystem() passing file system name, the same file system name again and the drive number.

   325 //!				6. Call Close() method.

   326 //! @SYMTestStatus		Implemented

   327 //! @SYMTestPriority		Critical

   328 //! @SYMTestExpectedResults	SwapFileSystem() returns KErrNone. 

   329 //! @SYMTestType		CIT

   330 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   331 		CREATE_OBJECT	RFs	RFs1

   332 		COMMAND		RFs1	new

   333 		COMMAND		RFs1	Connect

   334 		COMMAND		RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0017-001-FileSystemName_command03

   335 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0017-001-DismountFileSystem_command04

   336 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0017-001-MountFileSystem_command05

   337 		COMMAND		RFs1	SwapFileSystem		PBASE-F32-RFS-PublicApi-0017-001-SwapFileSystem_command06

   338 		COMMAND		RFs1	Close

   339 		COMMAND		RFs1	~

   340 	END_TEST_BLOCK	

   341 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0017

   342 

   343 

   344 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0018

   345 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0018

   346 //! @SYMAPI			RFs

   347 //! @SYMTestCaseDesc		Function NotifyDismountCancel() test.

   348 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   349 //!				Uses API elements:  NotifyDismountCancel(), NotifyDismount(), MountFileSystem(), DismountFileSystem()

   350 //! @SYMTestActions		1. Create a RFs session and call it's Connect() function.

   351 //!				2. Call NotifyDismount() providing the drive number and mode value EFsDismountRegisterClient and starts waiting for a notification on the background.

   352 //!				3. Call NotifyDismount() providing the drive number and mode value EFsDismountNotifyClients and starts waiting for a notification on the background.

   353 //!				4. Call NotifyDismountCancel() without arguments(for all requests) .

   354 //!				5. Call Close() method.

   355 //! @SYMTestStatus		Implemented

   356 //! @SYMTestPriority		Critical

   357 //! @SYMTestExpectedResults	KErrCancel(-3)

   358 //! @SYMTestType		CIT

   359 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   360 		CREATE_OBJECT	RFs	RFs1

   361 		COMMAND			RFs1	new

   362 		COMMAND			RFs1	Connect

   363 		COMMAND			RFs1	NotifyDismount		PBASE-F32-RFS-PublicApi-0018-001-NotifyDismount_command03

   364 		COMMAND	!AsyncError=-3	RFs1	NotifyDismount		PBASE-F32-RFS-PublicApi-0018-001-NotifyDismount_command04

   365 		COMMAND			RFs1	NotifyDismountCancel	PBASE-F32-RFS-PublicApi-0018-001-NotifyDismountCancel_command05

   366 		OUTSTANDING	

   367 		COMMAND			RFs1	Close

   368 		COMMAND			RFs1	~

   369 	END_TEST_BLOCK	

   370 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0018

   371 

   372 

   373 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0025

   374 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0025

   375 //! @SYMAPI			RFs

   376 //! @SYMTestCaseDesc		Functions MountFileSystem(const TDesC &aFileSystemName, TInt aDrive) test with incorrect file system name.

   377 //!				Uses API elements: MountFileSystem().

   378 //! @SYMTestActions		1. Call Connect() method.

   379 //!				2. Call MountFileSystem() providing the incorrect file system name and drive for mounts where nothing mounted.

   380 //!				3. Call Close() method.

   381 //! @SYMTestStatus		Implemented

   382 //! @SYMTestPriority		High

   383 //! @SYMTestExpectedResults	KErrNotFound.

   384 //! @SYMTestType		CIT

   385 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   386 		CREATE_OBJECT	RFs	RFs1

   387 		COMMAND			RFs1	new

   388 		COMMAND			RFs1	Connect

   389 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0025-001-FileSystemName_command03

   390 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0025-001-DismountFileSystem_command04

   391 		COMMAND	!Error=-1	RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0025-001-MountFileSystem_command05

   392 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0025-001-MountFileSystem_command06

   393 		COMMAND			RFs1	Close

   394 		COMMAND			RFs1	~

   395 	END_TEST_BLOCK	

   396 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0025

   397 

   398 

   399 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0026

   400 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0026

   401 //! @SYMAPI			RFs

   402 //! @SYMTestCaseDesc		Functions MountFileSystem(const TDesC &aFileSystemName, TInt aDrive) test, mount file system where already mounted one.

   403 //!				Uses API elements: MountFileSystem().

   404 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   405 //! @SYMTestActions		1. Call Connect() method.

   406 //!				2. Call MountFileSystem() providing the file system name and drive for mounts.

   407 //!				3. Call Close() method.

   408 //! @SYMTestStatus		Implemented

   409 //! @SYMTestPriority		High

   410 //! @SYMTestExpectedResults	KErrAccessDenied.

   411 //! @SYMTestType		CIT

   412 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   413 		CREATE_OBJECT	RFs	RFs1

   414 		COMMAND			RFs1	new

   415 		COMMAND			RFs1	Connect

   416 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0026-001-FileSystemName_command03

   417 		COMMAND	!Error=-21	RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0026-001-MountFileSystem_command04

   418 		COMMAND			RFs1	Close

   419 		COMMAND			RFs1	~

   420 	END_TEST_BLOCK	

   421 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0026

   422 

   423 

   424 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0028

   425 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0028

   426 //! @SYMAPI			RFs

   427 //! @SYMTestCaseDesc		Functions MountFileSystem(const TDesC &aFileSystemName, TInt aDrive, TBool aIsSync) test with incorrect file system name.

   428 //!				Uses API elements: MountFileSystem().

   429 //! @SYMTestActions		1. Call Connect() method.

   430 //!				2. Call MountFileSystem() providing the incorrect file system name and drive for mounts where nothing mounted, and ETrue as a synchronization parameter.

   431 //!				3. Call Close() method.

   432 //! @SYMTestStatus		Implemented

   433 //! @SYMTestPriority		High

   434 //! @SYMTestExpectedResults	KErrNotFound.

   435 //! @SYMTestType		CIT

   436 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   437 		CREATE_OBJECT	RFs	RFs1

   438 		COMMAND			RFs1	new

   439 		COMMAND			RFs1	Connect

   440 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0028-001-FileSystemName_command03

   441 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0028-001-DismountFileSystem_command04

   442 		COMMAND	!Error=-1	RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0028-001-MountFileSystem_command05

   443 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0028-001-MountFileSystem_command06

   444 		COMMAND			RFs1	Close

   445 		COMMAND			RFs1	~

   446 	END_TEST_BLOCK	

   447 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0028

   448 

   449 

   450 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0029

   451 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0029

   452 //! @SYMAPI			RFs

   453 //! @SYMTestCaseDesc		Functions MountFileSystem(const TDesC &aFileSystemName, TInt aDrive, TBool aIsSync) test, mount file system where already mounted one.

   454 //!				Uses API elements: MountFileSystem().

   455 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   456 //! @SYMTestActions		1. Call Connect() method.

   457 //!				2. Call MountFileSystem() providing the file system name and drive for mounts, and ETrue as a synchronization parameter.

   458 //!				3. Call Close() method.

   459 //! @SYMTestStatus		Implemented

   460 //! @SYMTestPriority		High

   461 //! @SYMTestExpectedResults	KErrAccessDenied.

   462 //! @SYMTestType		CIT

   463 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   464 		CREATE_OBJECT	RFs	RFs1

   465 		COMMAND			RFs1	new

   466 		COMMAND			RFs1	Connect

   467 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0029-001-FileSystemName_command03

   468 		COMMAND	!Error=-21	RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0029-001-MountFileSystem_command04

   469 		COMMAND			RFs1	Close

   470 		COMMAND			RFs1	~

   471 	END_TEST_BLOCK	

   472 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0029

   473 

   474 

   475 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0031

   476 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0031

   477 //! @SYMAPI			RFs

   478 //! @SYMTestCaseDesc		Functions MountFileSystem(const TDesC &aFileSystemName, TInt aDrive, TBool aIsSync) test with incorrect file system name.

   479 //!				Uses API elements: MountFileSystem().

   480 //! @SYMTestActions		1. Call Connect() method.

   481 //!				2. Call MountFileSystem() providing the bad file system name and drive for mounts where nothing mounted, and EFalse as a synchronization parameter.

   482 //!				3. Call Close() method.

   483 //! @SYMTestStatus		Implemented

   484 //! @SYMTestPriority		High

   485 //! @SYMTestExpectedResults	KErrNotFound.

   486 //! @SYMTestType		CIT

   487 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   488 		CREATE_OBJECT	RFs	RFs1

   489 		COMMAND			RFs1	new

   490 		COMMAND			RFs1	Connect

   491 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0031-001-FileSystemName_command03

   492 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0031-001-DismountFileSystem_command04

   493 		COMMAND	!Error=-1	RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0031-001-MountFileSystem_command05

   494 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0031-001-MountFileSystem_command06

   495 		COMMAND			RFs1	Close

   496 		COMMAND			RFs1	~

   497 	END_TEST_BLOCK	

   498 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0031

   499 

   500 

   501 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0032

   502 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0032

   503 //! @SYMAPI			RFs

   504 //! @SYMTestCaseDesc		Functions MountFileSystem(const TDesC &aFileSystemName, TInt aDrive, TBool aIsSync) test, mount file system where already mounted one.

   505 //!				Uses API elements: MountFileSystem().

   506 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   507 //! @SYMTestActions		1. Call Connect() method.

   508 //!				2. Call MountFileSystem() providing the file system name and drive for mounts, and EFalse as a synchronization parameter.

   509 //!				3. Call Close() method.

   510 //! @SYMTestStatus		Implemented

   511 //! @SYMTestPriority		High

   512 //! @SYMTestExpectedResults	KErrAccessDenied.

   513 //! @SYMTestType		CIT

   514 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   515 		CREATE_OBJECT	RFs	RFs1

   516 		COMMAND			RFs1	new

   517 		COMMAND			RFs1	Connect

   518 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0032-001-FileSystemName_command03

   519 		COMMAND	!Error=-21	RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0032-001-MountFileSystem_command04

   520 		COMMAND			RFs1	Close

   521 		COMMAND			RFs1	~

   522 	END_TEST_BLOCK	

   523 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0032

   524 

   525 

   526 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0034

   527 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0034

   528 //! @SYMAPI			RFs

   529 //! @SYMTestCaseDesc		Functions MountFileSystemAndScan(const TDesC &aFileSystemName, TInt aDrive, TBool &aIsMountSuccess) test with bad file system name.

   530 //!				Uses API elements: MountFileSystemAndScan().

   531 //! @SYMTestActions		1. Call Connect() method.

   532 //!				2. Call MountFileSystemAndScan() providing the bad file system name and drive for mounts (not drive for MMC card).

   533 //!				3. Call Close() method.

   534 //! @SYMTestStatus		Implemented

   535 //! @SYMTestPriority		High

   536 //! @SYMTestExpectedResults	KErrNotFound, Filesystem not found

   537 //! @SYMTestType		CIT

   538 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   539 		CREATE_OBJECT	RFs	RFs1

   540 		COMMAND			RFs1	new

   541 		COMMAND			RFs1	Connect

   542 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0034-001-FileSystemName_command03

   543 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0034-001-DismountFileSystem_command04

   544 		COMMAND	!Error=-1	RFs1	MountFileSystemAndScan	PBASE-F32-RFS-PublicApi-0034-001-MountFileSystemAndScan_command05

   545 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0034-001-MountFileSystem_command06

   546 		COMMAND			RFs1	Close

   547 		COMMAND			RFs1	~

   548 	END_TEST_BLOCK	

   549 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0034

   550 

   551 

   552 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0035

   553 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0035

   554 //! @SYMAPI			RFs

   555 //! @SYMTestCaseDesc		Functions MountFileSystemAndScan(const TDesC &aFileSystemName, TInt aDrive, TBool &aIsMountSuccess) test with mounting file system that not support scanning.

   556 //!				Uses API elements: MountFileSystemAndScan(), DismountFileSystem().

   557 //! @SYMTestActions		1. Call Connect() method.

   558 //!				2. Call MountFileSystemAndScan() providing the file system name and the drive number.

   559 //!				3. Call DismountFileSystem() providing the file system name and the drive number.

   560 //!				4. Call Close() method.

   561 //! @SYMTestStatus		Implemented

   562 //! @SYMTestPriority		High

   563 //! @SYMTestExpectedResults	KErrNone.

   564 //! @SYMTestType		CIT

   565 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   566 		CREATE_OBJECT	RFs	RFs1

   567 		COMMAND		RFs1	new

   568 		COMMAND		RFs1	Connect

   569 		COMMAND		RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0035-001-FileSystemName_command03

   570 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0035-001-DismountFileSystem_command04

   571 		COMMAND		RFs1	MountFileSystemAndScan	PBASE-F32-RFS-PublicApi-0035-001-MountFileSystemAndScan_command05

   572 		COMMAND		RFs1	Close

   573 		COMMAND		RFs1	~

   574 	END_TEST_BLOCK	

   575 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0035

   576 

   577 

   578 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0037

   579 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0037

   580 //! @SYMAPI			RFs

   581 //! @SYMTestCaseDesc		Functions MountFileSystem(const TDesC &aFileSystemName, const TDesC &aExtensionName, TInt aDrive, TBool aIsSync) test with incorrect file system extension name.

   582 //!				Uses API elements: MountFileSystem(), DismountFileSystem().

   583 //! @SYMTestActions		1. Call Connect() method.

   584 //!				2. Call MountFileSystem() providing the file system name, drive for mounts, bad name of extension and EFalse as a synchronization parameter.

   585 //!				3. Call Close() method.

   586 //! @SYMTestStatus		Implemented

   587 //! @SYMTestPriority		High

   588 //! @SYMTestExpectedResults	KErrNotFound, extension not found

   589 //! @SYMTestType		CIT

   590 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   591 		CREATE_OBJECT	RFs	RFs1

   592 		COMMAND			RFs1	new

   593 		COMMAND			RFs1	Connect

   594 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0037-001-FileSystemName_command03

   595 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0037-001-DismountFileSystem_command04

   596 		COMMAND	!Error=-1	RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0037-001-MountFileSystem_command05

   597 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0037-001-MountFileSystem_command06

   598 		COMMAND			RFs1	Close

   599 		COMMAND			RFs1	~

   600 	END_TEST_BLOCK	

   601 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0037

   602 

   603 

   604 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0038

   605 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0038

   606 //! @SYMAPI			RFs

   607 //! @SYMTestCaseDesc		Functions MountFileSystem(const TDesC &aFileSystemName, const TDesC &aExtensionName, TInt aDrive, TBool aIsSync) test with incorrect file system extension name.

   608 //!				Uses API elements: MountFileSystem(), DismountFileSystem().

   609 //! @SYMTestActions		1. Call Connect() method.

   610 //!				2. Call MountFileSystem() providing the file system name, drive for mounts, bad name of extension and ETrue as a synchronization parameter.

   611 //!				3. Call DismountFileSystem() providing the file system name and the drive for mounts.

   612 //!				4. Call Close() method.

   613 //! @SYMTestStatus		Implemented

   614 //! @SYMTestPriority		High

   615 //! @SYMTestExpectedResults	KErrNotFound, extension not found

   616 //! @SYMTestType		CIT

   617 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   618 		CREATE_OBJECT	RFs	RFs1

   619 		COMMAND			RFs1	new

   620 		COMMAND			RFs1	Connect

   621 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0038-001-FileSystemName_command03

   622 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0038-001-DismountFileSystem_command04

   623 		COMMAND	!Error=-1	RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0038-001-MountFileSystem_command05

   624 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0038-001-DismountFileSystem_command06

   625 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0038-001-MountFileSystem_command07

   626 		COMMAND			RFs1	Close

   627 		COMMAND			RFs1	~

   628 	END_TEST_BLOCK	

   629 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0038

   630 

   631 

   632 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0040

   633 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0040

   634 //! @SYMAPI			RFs

   635 //! @SYMTestCaseDesc		Functions DismountFileSystem() test with incorrect file system name.

   636 //!				Uses API elements: DismountFileSystem().

   637 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   638 //! @SYMTestActions		1. Call Connect() method.

   639 //!				2. Call DismountFileSystem() providing the bad file system name and drive for mounts.

   640 //!				3. Call Close() method.

   641 //! @SYMTestStatus		Implemented

   642 //! @SYMTestPriority		High

   643 //! @SYMTestExpectedResults	KErrNotFound, file system not found.

   644 //! @SYMTestType		CIT

   645 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   646 		CREATE_OBJECT	RFs	RFs1

   647 		COMMAND			RFs1	new

   648 		COMMAND			RFs1	Connect

   649 		COMMAND	!Error=-1	RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0040-001-DismountFileSystem_command03

   650 		COMMAND			RFs1	Close

   651 		COMMAND			RFs1	~

   652 	END_TEST_BLOCK	

   653 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0040

   654 

   655 

   656 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0041

   657 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0041

   658 //! @SYMAPI			RFs

   659 //! @SYMTestCaseDesc		Functions DismountFileSystem() test, dismount file system from drive, where not mounted one.

   660 //!				Uses API elements: DismountFileSystem().

   661 //! @SYMTestActions		1. Call Connect() method.

   662 //!				2. Call DismountFileSystem() providing the file system name and drive for mounts where no file system mounted.

   663 //!				3. Call Close() method.

   664 //! @SYMTestStatus		Implemented

   665 //! @SYMTestPriority		High

   666 //! @SYMTestExpectedResults	KErrNotReady

   667 //! @SYMTestType		CIT

   668 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   669 		CREATE_OBJECT	RFs	RFs1

   670 		COMMAND			RFs1	new

   671 		COMMAND			RFs1	Connect

   672 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0041-001-FileSystemName_command03

   673 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0041-001-DismountFileSystem_command04

   674 		COMMAND	!Error=-18	RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0041-001-DismountFileSystem_command05

   675 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0041-001-MountFileSystem_command06

   676 		COMMAND			RFs1	Close

   677 		COMMAND			RFs1	~

   678 	END_TEST_BLOCK	

   679 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0041

   680 

   681 

   682 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0046

   683 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0046

   684 //! @SYMAPI			RFs

   685 //! @SYMTestCaseDesc		Functions MountExtension() test, mount file system extension on drive, where no mounted file system.

   686 //!				Uses API elements: MountExtension(), AddExtension(), RemoveExtension().

   687 //!				The test requires a file system extension plug-in.

   688 //! @SYMTestActions		1. Call Connect() method.

   689 //!				2. Call AddExtension() providing plug-in extension name.

   690 //!				3. Call MountExtension() providing plug-in extension name and drive where not mounted file system. 

   691 //!				4. Call RemoveExtension() providing plug-in extension name.

   692 //!				5. Call Close() method.

   693 //! @SYMTestStatus		Implemented

   694 //! @SYMTestPriority		High

   695 //! @SYMTestExpectedResults	KErrNone

   696 //! @SYMTestType		CIT

   697 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   698 		CREATE_OBJECT	RFs	RFs1

   699 		COMMAND		RFs1	new

   700 		COMMAND		RFs1	Connect

   701 		COMMAND		RFs1	AddExtension		PBASE-F32-RFS-PublicApi-0046-001-AddExtension_command03

   702 		COMMAND		RFs1	MountExtension		PBASE-F32-RFS-PublicApi-0046-001-MountExtension_command04

   703 		COMMAND		RFs1	DismountExtension	PBASE-F32-RFS-PublicApi-0046-001-DismountExtension_command05

   704 		COMMAND		RFs1	RemoveExtension		PBASE-F32-RFS-PublicApi-0046-001-RemoveExtension_command06

   705 		COMMAND		RFs1	Close

   706 		COMMAND		RFs1	~

   707 	END_TEST_BLOCK	

   708 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0046

   709 

   710 

   711 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0048

   712 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0048

   713 //! @SYMAPI			RFs

   714 //! @SYMTestCaseDesc		Functions MountExtension() test with incorrect file system extension name.

   715 //!				Uses API elements: MountExtension().

   716 //! @SYMTestActions		1. Call Connect() method.

   717 //!				2. Call MountExtension() providing bad extension name and drive for mounts where is a mounted file system on.

   718 //!				3. Call Close() method.

   719 //! @SYMTestStatus		Implemented

   720 //! @SYMTestPriority		High

   721 //! @SYMTestExpectedResults	KErrNotFound

   722 //! @SYMTestType		CIT

   723 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   724 		CREATE_OBJECT	RFs	RFs1

   725 		COMMAND			RFs1	new

   726 		COMMAND			RFs1	Connect

   727 		COMMAND	!Error=-1	RFs1	MountExtension		PBASE-F32-RFS-PublicApi-0048-001-MountExtension_command03

   728 		COMMAND			RFs1	Close

   729 		COMMAND			RFs1	~

   730 	END_TEST_BLOCK	

   731 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0048

   732 

   733 

   734 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0050

   735 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0050

   736 //! @SYMAPI			RFs

   737 //! @SYMTestCaseDesc		Functions DismountExtension() test with incorrect file system extension name.

   738 //!				Uses API elements: DismountExtension().

   739 //! @SYMTestActions		1. Call Connect() method.

   740 //!				2. Call DismountExtension() providing bad extension name and drive number where is no mounted file system. 

   741 //!				3. Call Close() method.

   742 //! @SYMTestStatus		Implemented

   743 //! @SYMTestPriority		High

   744 //! @SYMTestExpectedResults	KErrNotFound

   745 //! @SYMTestType		CIT

   746 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   747 		CREATE_OBJECT	RFs	RFs1

   748 		COMMAND			RFs1	new

   749 		COMMAND			RFs1	Connect

   750 		COMMAND	!Error=-1	RFs1	DismountExtension	PBASE-F32-RFS-PublicApi-0050-001-DismountExtension_command03

   751 		COMMAND			RFs1	Close

   752 		COMMAND			RFs1	~

   753 	END_TEST_BLOCK	

   754 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0050

   755 

   756 

   757 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0054

   758 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0054

   759 //! @SYMAPI			RFs

   760 //! @SYMTestCaseDesc		Functions ExtensionName() test with large number of position as argument.

   761 //!				Uses API elements: ExtensionName().

   762 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   763 //! @SYMTestActions		1. Call Connect() method.

   764 //!				2. Call ExtensionName() providing drive number and large number as position.

   765 //!				3. Call Close() method.

   766 //! @SYMTestStatus		Implemented

   767 //! @SYMTestPriority		High

   768 //! @SYMTestExpectedResults	KErrNotFound

   769 //! @SYMTestType		CIT

   770 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   771 		CREATE_OBJECT	RFs	RFs1

   772 		COMMAND			RFs1	new

   773 		COMMAND			RFs1	Connect

   774 		COMMAND	!Error=-1	RFs1	ExtensionName		PBASE-F32-RFS-PublicApi-0054-001-ExtensionName_command03

   775 		COMMAND			RFs1	Close

   776 		COMMAND			RFs1	~

   777 	END_TEST_BLOCK	

   778 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0054

   779 

   780 

   781 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0059

   782 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0059

   783 //! @SYMAPI			RFs

   784 //! @SYMTestCaseDesc		Functions NotifyDismount() test with drive where no mounted file system.

   785 //!				Uses API elements: NotifyDismount().

   786 //! @SYMTestActions		1. Call Connect() method.

   787 //!				2. Call NotifyDismount() providing drive number where is no mounted file system and mode EFsDismountForceDismount and starts waiting for a notification on the background.

   788 //!				3. Call Close() method.

   789 //! @SYMTestStatus		Implemented

   790 //! @SYMTestPriority		High

   791 //! @SYMTestExpectedResults	KErrNone

   792 //! @SYMTestType		CIT

   793 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   794 		CREATE_OBJECT	RFs	RFs1

   795 		COMMAND		RFs1	new

   796 		COMMAND		RFs1	Connect

   797 		COMMAND		RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0059-001-FileSystemName_command03

   798 		COMMAND		RFs1	NotifyDismount		PBASE-F32-RFS-PublicApi-0059-001-NotifyDismount_command04

   799 		OUTSTANDING	

   800 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0059-001-MountFileSystem_command06

   801 		COMMAND		RFs1	Close

   802 		COMMAND		RFs1	~

   803 	END_TEST_BLOCK	

   804 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0059

   805 

   806 

   807 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0060

   808 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0060

   809 //! @SYMAPI			RFs

   810 //! @SYMTestCaseDesc		Functions AllowDismount() test with drive where no mounted file system.

   811 //!				Uses API elements: AllowDismount().

   812 //! @SYMTestActions		1. Call Connect() method.

   813 //!				2. Call AllowDismount() providing drive number where no mounted file system.

   814 //!				3. Call Close() method.

   815 //! @SYMTestStatus		Implemented

   816 //! @SYMTestPriority		High

   817 //! @SYMTestExpectedResults	KErrNotFound as nothing has requested to notify the dismount

   818 //! @SYMTestType		CIT

   819 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   820 		CREATE_OBJECT	RFs	RFs1

   821 		COMMAND			RFs1	new

   822 		COMMAND			RFs1	Connect

   823 		COMMAND	!Error=-1	RFs1	AllowDismount		PBASE-F32-RFS-PublicApi-0060-001-AllowDismount_command03

   824 		COMMAND			RFs1	Close

   825 		COMMAND			RFs1	~

   826 	END_TEST_BLOCK	

   827 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0060

   828 

   829 

   830 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0069

   831 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0069

   832 //! @SYMAPI			RFs

   833 //! @SYMTestCaseDesc		Functions SwapFileSystem() test with incorrect file system name as old file system argument.

   834 //!				Uses API elements: SwapFileSystem().

   835 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   836 //! @SYMTestActions		1. Call Connect() method.

   837 //!				2. Call SwapFileSystem() providing enabled drive, bad name of old file system name and FAT as new file system name.

   838 //!				3. Call Close() method.

   839 //! @SYMTestStatus		Implemented

   840 //! @SYMTestPriority		High

   841 //! @SYMTestExpectedResults	KErrNotFound

   842 //! @SYMTestType		CIT

   843 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   844 		CREATE_OBJECT	RFs	RFs1

   845 		COMMAND			RFs1	new

   846 		COMMAND			RFs1	Connect

   847 		COMMAND	!Error=-1	RFs1	SwapFileSystem		PBASE-F32-RFS-PublicApi-0069-001-SwapFileSystem_command03

   848 		COMMAND			RFs1	Close

   849 		COMMAND			RFs1	~

   850 	END_TEST_BLOCK	

   851 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0069

   852 

   853 

   854 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0070

   855 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0070

   856 //! @SYMAPI			RFs

   857 //! @SYMTestCaseDesc		Functions SwapFileSystem() test with incorrect file system name as new file system argument.

   858 //!				Uses API elements: SwapFileSystem().

   859 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   860 //! @SYMTestActions		1. Call Connect() method.

   861 //!				2. Call SwapFileSystem() providing enabled drive, FAT as old file system name and bad name of new file system name.

   862 //!				3. Call Close() method.

   863 //! @SYMTestStatus		Implemented

   864 //! @SYMTestPriority		High

   865 //! @SYMTestExpectedResults	KErrNotFound

   866 //! @SYMTestType		CIT

   867 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   868 		CREATE_OBJECT	RFs	RFs1

   869 		COMMAND			RFs1	new

   870 		COMMAND			RFs1	Connect

   871 		COMMAND	!Error=-1	RFs1	SwapFileSystem		PBASE-F32-RFS-PublicApi-0070-001-SwapFileSystem_command03

   872 		COMMAND			RFs1	Close

   873 		COMMAND			RFs1	~

   874 	END_TEST_BLOCK	

   875 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0070

   876 

   877 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0072

   878 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0072

   879 //! @SYMAPI			RFs

   880 //! @SYMTestCaseDesc		Function NotifyDismountCancel(TRequestStatus& aStat) test that tryes to cancel same request twice.

   881 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   882 //!				Uses API elements:  NotifyDismountCancel(), NotifyDismount(), MountFileSystem(), FileSystemName().

   883 //! @SYMTestActions		1. Call Connect() method.

   884 //!				2. Call FileSystemName() for a drive where a file system was mounted.

   885 //!				3. Call NotifyDismount() providing the drive number and mode value EFsDismountRegisterClient and starts waiting for a notification on the background.

   886 //!				4. Call NotifyDismountCancel() providing the same TRequestStatus as in previous call.

   887 //!				5. Call NotifyDismountCancel() providing the same TRequestStatus as in previous call.

   888 //!				6. Call Close() of both sessions.

   889 //! @SYMTestStatus		Implemented

   890 //! @SYMTestPriority		Critical

   891 //! @SYMTestExpectedResults	Request status is set to KErrCancel(-3) and second NotifyDismountCancel() doesn't cause panic.

   892 //! @SYMTestType		CIT

   893 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   894 		CREATE_OBJECT	RFs	RFs1

   895 		COMMAND			RFs1	new

   896 		COMMAND			RFs1	Connect

   897 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0072-001-FileSystemName_command03

   898 		COMMAND	!AsyncError=-3	RFs1	NotifyDismount		PBASE-F32-RFS-PublicApi-0072-001-NotifyDismount_command04

   899 		COMMAND			RFs1	NotifyDismountCancel	PBASE-F32-RFS-PublicApi-0072-001-NotifyDismountCancel_command05

   900 		COMMAND			RFs1	NotifyDismountCancel	PBASE-F32-RFS-PublicApi-0072-001-NotifyDismountCancel_command06

   901 		OUTSTANDING	

   902 		COMMAND			RFs1	Close

   903 		COMMAND			RFs1	~

   904 	END_TEST_BLOCK	

   905 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0072

   906 

   907 

   908 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0075

   909 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0075

   910 //! @SYMAPI			RFs

   911 //! @SYMTestCaseDesc		Function NotifyChange(TNotifyType aType, TRequestStatus &aStat, const TDesC &aPathName) test with notify types ENotifyAll.

   912 //!				Uses API elements:  NotifyChange(), FileSystemName(), DismountFileSystem(), MountFileSystem().

   913 //!				The test assumes that the tested file system is already mounted onto the tested drive.

   914 //! @SYMTestActions		1. Call Connect().

   915 //!				2. Call FileSystemName() passing the drive number as argument.

   916 //!				3. Call NotifyChange() passing ENotifyAll as parameter and starts waiting for a notification on the background.

   917 //!				4. Call DismountFileSystem() passing the drive number as argument.

   918 //!				5. Call NotifyChange() passing ENotifyAll as parameter and starts waiting for a notification on the background.

   919 //!				6. Call MountFileSystem() passing the drive number as argument.

   920 //!				7. Call Close().

   921 //! @SYMTestStatus		Implemented

   922 //! @SYMTestPriority		High

   923 //! @SYMTestExpectedResults	Doesn't cause panic.

   924 //! @SYMTestType		CIT

   925 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   926 		CREATE_OBJECT	RFs	RFs1

   927 		COMMAND		RFs1	new

   928 		COMMAND		RFs1	Connect

   929 		COMMAND		RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0075-001-FileSystemName_command03

   930 		COMMAND		RFs1	NotifyChange		PBASE-F32-RFS-PublicApi-0075-001-NotifyChange_command04

   931 		COMMAND		RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0075-001-DismountFileSystem_command05

   932 		OUTSTANDING	

   933 		COMMAND		RFs1	NotifyChange		PBASE-F32-RFS-PublicApi-0075-001-NotifyChange_command07

   934 		COMMAND		RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0075-001-MountFileSystem_command08

   935 		OUTSTANDING	

   936 		COMMAND		RFs1	Close

   937 		COMMAND		RFs1	~

   938 	END_TEST_BLOCK	

   939 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0075

   940 

   941 

   942 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0014

   943 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0014

   944 //! @SYMAPI			RFs

   945 //! @SYMTestCaseDesc		Function AddCompositeMount() test.

   946 //!				Uses API elements:  AddCompositeMount()

   947 //! @SYMTestActions		1. Call Connect().

   948 //!				2. Call AddCompositeMount() providing a file system name, c-drive as a local drive, and an empty drive as a composite drive and EFalse as a synchronization parameter.

   949 //!				3. Call Close().

   950 //! @SYMTestStatus		Implemented

   951 //! @SYMTestPriority		High

   952 //! @SYMTestExpectedResults	Check that AddCompositeMount() returns KErrNotSupported (-5).

   953 //! @SYMTestType		CIT

   954 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   955 		CREATE_OBJECT	RFs	RFs1

   956 		COMMAND			RFs1	new

   957 		COMMAND			RFs1	Connect

   958 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0014-001-FileSystemName_command03

   959 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0014-001-DismountFileSystem_command04

   960 		COMMAND	!Error=-5	RFs1	AddCompositeMount	PBASE-F32-RFS-PublicApi-0014-001-AddCompositeMount_command05

   961 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0014-001-MountFileSystem_command06

   962 		COMMAND			RFs1	Close

   963 		COMMAND			RFs1	~		

   964 	END_TEST_BLOCK	

   965 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0014

   966 

   967 

   968 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0036

   969 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0036

   970 //! @SYMAPI			RFs

   971 //! @SYMTestCaseDesc		Functions MountFileSystemAndScan(const TDesC &aFileSystemName, const TDesC &aExtensionName, TInt aDrive, TBool &aIsMountSuccess) test with incorrect file system extension name.

   972 //!				Uses API elements: MountFileSystemAndScan(), DismountFileSystem().

   973 //! @SYMTestActions		1. Call Connect() method.

   974 //!				2. Call MountFileSystemAndScan() providing the file system name (Fat) and drive for mounts, and bad name of extension.

   975 //!				3. Call DismountFileSystem() providing the file system name and the drive for mounts.

   976 //!				4. Call Close() method.

   977 //! @SYMTestStatus		Implemented

   978 //! @SYMTestPriority		High

   979 //! @SYMTestExpectedResults	KErrNotFound, extension not found

   980 //! @SYMTestType		CIT

   981 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

   982 		CREATE_OBJECT	RFs	RFs1

   983 		COMMAND			RFs1	new

   984 		COMMAND			RFs1	Connect

   985 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0036-001-FileSystemName_command03

   986 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0036-001-DismountFileSystem_command04

   987 		COMMAND	!Error=-1	RFs1	MountFileSystemAndScan	PBASE-F32-RFS-PublicApi-0036-001-MountFileSystemAndScan_command05

   988 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0036-001-DismountFileSystem_command06

   989 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0036-001-MountFileSystem_command07

   990 		COMMAND			RFs1	Close

   991 		COMMAND			RFs1	~		

   992 	END_TEST_BLOCK	

   993 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0036

   994 

   995 

   996 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0043

   997 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0043

   998 //! @SYMAPI			RFs

   999 //! @SYMTestCaseDesc		Functions FileSystemName() test, get file system name from drive where no mounted file system.

  1000 //!				Uses API elements: FileSystemName().

  1001 //! @SYMTestActions		1. Call Connect() method.

  1002 //!				2. Call FileSystemName() providing a drive number where is no mounted file system.

  1003 //!				3. Call Close() method.

  1004 //! @SYMTestStatus		Implemented

  1005 //! @SYMTestPriority		High

  1006 //! @SYMTestExpectedResults	KErrNotFound

  1007 //! @SYMTestType		CIT

  1008 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

  1009 		CREATE_OBJECT	RFs	RFs1

  1010 		COMMAND			RFs1	new

  1011 		COMMAND			RFs1	Connect

  1012 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0043-001-FileSystemName_command03

  1013 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0043-001-DismountFileSystem_command04

  1014 		COMMAND	!Error=-1	RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0043-001-FileSystemName_command05

  1015 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0043-001-MountFileSystem_command06

  1016 		COMMAND			RFs1	Close

  1017 		COMMAND			RFs1	~		

  1018 	END_TEST_BLOCK	

  1019 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0043

  1020 

  1021 

  1022 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0063

  1023 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0063

  1024 //! @SYMAPI			RFs

  1025 //! @SYMTestCaseDesc		Functions AddCompositeMount() test with incorrect file system name in asynchronous mode.

  1026 //!				Uses API elements: AddCompositeMount().

  1027 //! @SYMTestActions		1. Call Connect() method.

  1028 //!				2. Call AddCompositeMount() providing C-drive as local drive, an empty drive as a composite drive argument, bad filesystem name and false as synchronous as a parameters.

  1029 //!				3. Call Close() method.

  1030 //! @SYMTestStatus		Implemented

  1031 //! @SYMTestPriority		High

  1032 //! @SYMTestExpectedResults	KErrNotFound

  1033 //! @SYMTestType		CIT

  1034 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

  1035 		CREATE_OBJECT	RFs	RFs1

  1036 		COMMAND			RFs1	new

  1037 		COMMAND			RFs1	Connect

  1038 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0063-001-FileSystemName_command03

  1039 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0063-001-DismountFileSystem_command04

  1040 		COMMAND	!Error=-1	RFs1	AddCompositeMount	PBASE-F32-RFS-PublicApi-0063-001-AddCompositeMount_command05

  1041 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0063-001-MountFileSystem_command06

  1042 		COMMAND			RFs1	Close

  1043 		COMMAND			RFs1	~		

  1044 	END_TEST_BLOCK	

  1045 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0063

  1046 

  1047 

  1048 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0064

  1049 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0064

  1050 //! @SYMAPI			RFs

  1051 //! @SYMTestCaseDesc		Functions AddCompositeMount() test with incorrect file system name in synchronous mode.

  1052 //!				Uses API elements: AddCompositeMount().

  1053 //! @SYMTestActions		1. Call Connect() method.

  1054 //!				2. Call AddCompositeMount() providing drive number as local drive, drive for mount, bad filesystem name and true as synchronous as a parameters.

  1055 //!				3. Call Close() method.

  1056 //! @SYMTestStatus		Implemented

  1057 //! @SYMTestPriority		High

  1058 //! @SYMTestExpectedResults	KErrNotFound

  1059 //! @SYMTestType		CIT

  1060 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

  1061 		CREATE_OBJECT	RFs	RFs1

  1062 		COMMAND			RFs1	new

  1063 		COMMAND			RFs1	Connect

  1064 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0064-001-FileSystemName_command03

  1065 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0064-001-DismountFileSystem_command04

  1066 		COMMAND	!Error=-1	RFs1	AddCompositeMount	PBASE-F32-RFS-PublicApi-0064-001-AddCompositeMount_command05

  1067 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0064-001-MountFileSystem_command06

  1068 		COMMAND			RFs1	Close

  1069 		COMMAND			RFs1	~		

  1070 	END_TEST_BLOCK	

  1071 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0064

  1072 

  1073 

  1074 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0065

  1075 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0065

  1076 //! @SYMAPI			RFs

  1077 //! @SYMTestCaseDesc		Functions AddCompositeMount() test with negative drive number for local drive argument in asynchronous mode.

  1078 //!				Uses API elements: AddCompositeMount().

  1079 //! @SYMTestActions		1. Call Connect() method.

  1080 //!				2. Call AddCompositeMount() providing negative drive number as local drive, drive for mounts, "FAT" filesystem name and FALSE as synchronous as a parameters.

  1081 //!				3. Call Close() method.

  1082 //! @SYMTestStatus		Implemented

  1083 //! @SYMTestPriority		High

  1084 //! @SYMTestExpectedResults	KErrNotSupported

  1085 //! @SYMTestType		CIT

  1086 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

  1087 		CREATE_OBJECT	RFs	RFs1

  1088 		COMMAND			RFs1	new

  1089 		COMMAND			RFs1	Connect

  1090 		COMMAND			RFs1	FileSystemName		PBASE-F32-RFS-PublicApi-0065-001-FileSystemName_command03

  1091 		COMMAND			RFs1	DismountFileSystem	PBASE-F32-RFS-PublicApi-0065-001-DismountFileSystem_command04

  1092 		COMMAND	!Error=-5	RFs1	AddCompositeMount	PBASE-F32-RFS-PublicApi-0065-001-AddCompositeMount_command05

  1093 		COMMAND			RFs1	MountFileSystem		PBASE-F32-RFS-PublicApi-0065-001-MountFileSystem_command06

  1094 		COMMAND			RFs1	Close

  1095 		COMMAND			RFs1	~		

  1096 	END_TEST_BLOCK	

  1097 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0065

  1098 

  1099 

  1100 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0066

  1101 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0066

  1102 //! @SYMAPI			RFs

  1103 //! @SYMTestCaseDesc		Functions AddCompositeMount() test with negative drive number for composite drive argument in asynchronous mode.

  1104 //!				Uses API elements: AddCompositeMount().

  1105 //! @SYMTestActions		1. Call Connect() method.

  1106 //!				2. Call AddCompositeMount() providing C-drive as a local drive, negative drive number as composite drive, "FAT" filesystem name and FALSE as synchronous as a parameters.

  1107 //!				3. Call Close() method.

  1108 //! @SYMTestStatus		Implemented

  1109 //! @SYMTestPriority		High

  1110 //! @SYMTestExpectedResults	KErrNotSupported

  1111 //! @SYMTestType		CIT

  1112 	START_TEST_BLOCK	100	T_Sfsrv	\base\PBASE-F32-RFS-Mounts-PublicApi-RAM.ini 

  1113 		CREATE_OBJECT	RFs	RFs1

  1114 		COMMAND			RFs1	new

  1115 		COMMAND			RFs1	Connect

  1116 		COMMAND	!Error=-5	RFs1	AddCompositeMount	PBASE-F32-RFS-PublicApi-0066-001-AddCompositeMount_command03

  1117 		COMMAND			RFs1	Close

  1118 		COMMAND			RFs1	~		

  1119 	END_TEST_BLOCK	

  1120 END_TESTCASE 			PBASE-F32-RFS-PublicApi-0066

  1121 

  1122 

  1123 START_TESTCASE 			PBASE-F32-RFS-PublicApi-0067

  1124 //! @SYMTestCaseID		PBASE-F32-RFS-PublicApi-0067

  1125 //! @SYMAPI			RFs

  1126 //! @SYMTestCaseDesc		Functions AddCompositeMount() test with negative drive number for local drive argument in synchronous mode.

  1127 //!				Uses API elements: AddCompositeMount().

  1128 //! @SYMTestActions		1. Call Connect() method.

  1129 //!				2. Call AddCompositeMount() providing negative drive number as local drive, drive for mounts, "FAT" filesystem name and TRUE as synchronous as a parameters.

  1130 //!				3. Call Close() method.

  1131 //! @SYMTestStatus		Implemented

  1132 //! @SYMTestPriority		High

  1133 //! @SYMTestExpectedResults	KErrNotSupported

  1134 //! @SYMTestType		CIT