baseapitest/basesvs/validation/f32/sfsrv/scripts/PBASE-F32-DUAL-DRIVE-Publicapi-RAM.script
--- a/baseapitest/basesvs/validation/f32/sfsrv/scripts/PBASE-F32-DUAL-DRIVE-Publicapi-RAM.script Mon Oct 18 15:31:10 2010 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,1134 +0,0 @@
-//
-// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).
-// All rights reserved.
-// This component and the accompanying materials are made available
-// under the terms of "Eclipse Public License v1.0"
-// which accompanies this distribution, and is available
-// at the URL "http://www.eclipse.org/legal/epl-v10.html".
-//
-// Initial Contributors:
-// Nokia Corporation - initial contribution.
-//
-// Contributors:
-//
-// Description:
-//
-//! @file
-//! @SYMTestSuiteName PBASE-F32-DUAL-DRIVE-Publicapi-RAM.script
-//! @SYMScriptTestEnvironment This test script requires a base ROM.
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-//The device has to support Dual drive feature for single interface. The drive info has to be changed
-//in dual_drive_env.ini before running the tests on the device which supports DUAL Drive with same interface.
-//Example two MMC drives or two NAND drives etc.
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-LOAD_SUITE T_Sfsrv
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0001
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0001
-//! @SYMAPI RFs::MkDirAll();TEntry::IsDir();RFs::RmDir()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 30/05/2008
-//! @SYMTestCaseDesc Try creating directory on both the drives and also check whether it has been created or not.
-//! And finally remove the directory created.
-//!
-//! @SYMTestActions 1. Create RFs instance.
-//! 2. Call RFs::MkDirAll() to create the directories.
-//! 3. Check the directory created using TEntry()
-//! 4. Remove the directory created.
-//! 5. Perform the above operation on both the drives concurrently
-//!
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Creates the directories on to both the drives concurrently.
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT TEntry tEntry1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll_drive1
- COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll2_drive1
- COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll3_drive1
- COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll4_drive1
- COMMAND tEntry1 new
- COMMAND rfs1 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry_drive1
- COMMAND tEntry1 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive1
- COMMAND rfs1 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry2_drive1
- COMMAND tEntry1 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive1
- COMMAND rfs1 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry3_drive1
- COMMAND tEntry1 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive1
- COMMAND rfs1 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry4_drive1
- COMMAND tEntry1 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive1
- COMMAND tEntry1 ~
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir_drive1
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir2_drive1
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir3_drive1
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir4_drive1
- COMMAND rfs1 Close
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT TEntry tEntry2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll_drive2
- COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll2_drive2
- COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll3_drive2
- COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll4_drive2
- COMMAND tEntry2 new
- COMMAND rfs2 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry_drive2
- COMMAND tEntry2 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive2
- COMMAND rfs2 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry2_drive2
- COMMAND tEntry2 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive2
- COMMAND rfs2 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry3_drive2
- COMMAND tEntry2 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive2
- COMMAND rfs2 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry4_drive2
- COMMAND tEntry2 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive2
- COMMAND tEntry2 ~
- COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir_drive2
- COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir2_drive2
- COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir3_drive2
- COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir4_drive2
- COMMAND rfs2 Close
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0001
-
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0002
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0002
-//! @SYMAPI CFileMan::Attribs();CFileMan::Copy();Rfs::Att()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 30/05/2008
-//! @SYMTestCaseDesc Copy files on to both the drives from system drive concurrenlty
-//!
-//! @SYMTestActions 1. Call Copy() to copy files on to the mmc drives.
-//! 2. Set and Get the attribute of the file.
-//! 3. Delete the file copied on to the drive.
-//! 4. Perform above operation on both the drive concurrently.
-//!
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults copying files on to both drives concurrently works successfully.
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT RFile file1
- CREATE_OBJECT CFileMan fileMan1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND file1 new
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0005_Open_drive1
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0005_NewL_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0005_Copy_drive1
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0005_Open2_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0005_Copy2_drive1
- COMMAND rfs1 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att1_drive1
- COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0005_Attribs1_drive1
- COMMAND rfs1 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att2_drive1
- COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0005_Attribs2_drive1
- COMMAND rfs1 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att1_drive1
- COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0005_Delete_drive1
- COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0005_Delete2_drive1
- COMMAND fileMan1 ~
- COMMAND file1 Close
- COMMAND file1 ~
- COMMAND rfs1 Close
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT RFile file2
- CREATE_OBJECT CFileMan fileMan2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND file2 new
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0005_Open_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0005_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0005_Copy_drive2
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0005_Open2_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0005_Copy2_drive2
- COMMAND rfs2 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att1_drive2
- COMMAND fileMan2 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0005_Attribs1_drive2
- COMMAND rfs2 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att2_drive2
- COMMAND fileMan2 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0005_Attribs2_drive2
- COMMAND rfs2 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att1_drive2
- COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0005_Delete_drive2
- COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0005_Delete2_drive2
- COMMAND fileMan2 ~
- COMMAND file2 Close
- COMMAND file2 ~
- COMMAND rfs2 Close
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0002
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0003
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0003
-//! @SYMAPI RFile::Replace();RFile::Read();RFile::Write()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 30/05/2008
-//! @SYMTestCaseDesc create a file on to the both the drive, write and read the content of file and delete the file after the operation.
-//! Uses API elements: Open().
-//! @SYMTestActions 1. Create RFs session
-//! 2. Open the files
-//! 3. Write the contents on to the file.
-//! 4. Close files.
-//! 5. Open file the files.
-//! 6. Read the content of the filess.
-//! 7. Close file.
-//! 8. Delete files.
-//! 9. Perform the above operation on both the drives concurrently
-//!
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Can perform both read and write opearation on both the drives concurrently
-//!
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT RFile file1
- CREATE_OBJECT CFileMan fileMan1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND file1 new
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive1
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive1
- COMMAND file1 Close
- COMMAND file1 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive1
- COMMAND file1 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive1
- COMMAND file1 Close
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive1
- COMMAND file1 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive1
- COMMAND file1 Close
- COMMAND file1 ~
- COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive1
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT RFile file2
- CREATE_OBJECT CFileMan fileMan2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND file2 new
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive2
- COMMAND file2 Close
- COMMAND file2 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive2
- COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive2
- COMMAND file2 Close
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive2
- COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive2
- COMMAND file2 Close
- COMMAND file2 ~
- COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive2
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0003
-
-
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0004
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0004
-//! @SYMAPI CFileMan::Rename()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 30/05/2008
-//! @SYMTestCaseDesc Rename the files on the mmc drives.
-//! @SYMTestActions 1.Create a RFs session and call it's Connect() function.
-//! 2.Call CFileMan::NewL(RFs &aFs) and connected file server session as parameter.
-//! 3.Call CFileMan::Rename() to rename the file in one drive with different name.
-//! 4.Call CFileMan::Rename() to rename the file in second drive with different name.
-//! 5.Delete the renamed file.
-//! 6.Close the Rfs session.
-//! 7.Perform the above operation on both the drives concurrently
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Files get renamed on both the drives.
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT RFile file1
- CREATE_OBJECT CFileMan fileMan1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND file1 new
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0009_Open_drive1
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0009_NewL_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0009_Copy_drive1
- COMMAND fileMan1 Rename PBASE-F32-DualDrive-Publicapi-RAM-0009_Rename_drive1
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0009_Open_drive1
- COMMAND file1 Close
- COMMAND fileMan1 ~
- COMMAND file1 ~
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT RFile file2
- CREATE_OBJECT CFileMan fileMan2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND file2 new
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0009_Open_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0009_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0009_Copy_drive2
- COMMAND fileMan2 Rename PBASE-F32-DualDrive-Publicapi-RAM-0009_Rename_drive2
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0009_Open_drive2
- COMMAND file2 Close
- COMMAND fileMan2 ~
- COMMAND file2 ~
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0004
-
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0005
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0005
-//! @SYMAPI CFileMan:Move()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 30/05/2008
-//! @SYMTestCaseDesc Move the files between the two drives
-//!
-//! @SYMTestActions 1.Create a RFs session and call it's Connect() function.
-//! 2.Call CFileMan::NewL(RFs &aFs) and connected file server session as parameter.
-//! 3.Call CFileMan::Move() to move the file from drive1 to drive2.
-//! 4.Call CFileMan::Move(), to move the file from drive2 to drive2.
-//! 5.Delete the moved files.
-//! 6 Delete the directory in which the file is moved.
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Files are moved across the drives..
-//! @SYMTestType CIT
-START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT RFile file1
- CREATE_OBJECT CFileMan fileMan1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND rfs1 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0010_MkDir_drive1
- COMMAND rfs1 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0010_MkDir_drive2
- COMMAND file1 new
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0010_NewL_drive1
- COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0010_Move_drive1
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0010_Open_drive1
- COMMAND file1 Close
- COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0010_Move_drive2
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0010_Open_drive2
- COMMAND file1 Close
- COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0010_Attribs_drive1
- COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0010_Attribs_drive2
- COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0010_Delete_drive1
- COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0010_Delete_drive2
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0010_RmDir_drive1
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0010_RmDir_drive2
- COMMAND fileMan1 ~
- COMMAND file1 ~
- COMMAND rfs1 ~
-END_TEST_BLOCK
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0005
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0006
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0006
-//! @SYMAPI CFileMan:Move()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 02/07/2008
-//! @SYMTestCaseDesc Move the files from system drive to dual drive and back in to systemdrive CONCURRENTly.
-//!
-//! @SYMTestActions 1.Create a RFs session and call it's Connect() function.
-//! 2.Call CFileMan::NewL(RFs &aFs) and connected file server session as parameter.
-//! 3.Call CFileMan::Move() to move the file from system drive to the one of the dual drive drive.
-//! 4.Call CFileMan::Move(), to move the file from dual drive to the systemdrive .
-//! 5.Delete the directory in which the file is moved.
-//! 6.Perform the above operation concurrently on both the dual drives
-//!
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Files are moved from systemdrive to dual drives concurrantly.
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT RFile file1
- CREATE_OBJECT CFileMan fileMan1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND rfs1 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0011_MkDir_drive1
- COMMAND file1 new
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0011_NewL_drive1
- COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move_drive1
- COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move2_drive1
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0011_Open2_drive1
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0011_RmDir_drive1
- COMMAND file1 Close
- COMMAND fileMan1 ~
- COMMAND file1 ~
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT RFile file2
- CREATE_OBJECT CFileMan fileMan2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND rfs2 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0011_MkDir_drive2
- COMMAND file2 new
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0011_NewL_drive2
- COMMAND fileMan2 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move_drive2
- COMMAND fileMan2 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move2_drive2
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0011_Open2_drive2
- COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0011_RmDir_drive2
- COMMAND file2 Close
- COMMAND fileMan2 ~
- COMMAND file2 ~
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0006
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0007
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0007
-//! @SYMAPI RFs::Volume();RFs::SetVolumeLabel()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 02/07/2008
-//! @SYMTestCaseDesc Get the Volume information for drives concurrently
-//! @SYMTestActions 1. Call Connect().
-//! 2. Saving volume label.
-//! 3. Call SetVolumeLabel() passing "Test" as first parameter and the drive number as a second parameter.
-//! 4. Call Volume() passing TVolumeInfo reference as first parameter and the drive number as a second parameter.
-//! 5. Restoring volume label.
-//! 6. Perform above operation concurrantly on both the drives.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Set and get the volume information of both the drives concurrently.
-//! @SYMTestType CIT
-
-CONCURRENT
- START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND rfs1 Volume PBASE-F32-DualDrive-Publicapi-RAM-0012_Volume_drive1
- COMMAND rfs1 SetVolumeLabel PBASE-F32-DualDrive-Publicapi-RAM-0012_SetVolumeLabel_drive1
- COMMAND rfs1 Volume PBASE-F32-DualDrive-Publicapi-RAM-0012_Volume_drive1
- COMMAND rfs1 SetVolumeLabel PBASE-F32-DualDrive-Publicapi-RAM-0012_SetVolumeLabel_drive1
- COMMAND rfs1 Close
- COMMAND rfs1 ~
- END_TEST_BLOCK
- START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND rfs2 Volume PBASE-F32-DualDrive-Publicapi-RAM-0012_Volume_drive2
- COMMAND rfs2 SetVolumeLabel PBASE-F32-DualDrive-Publicapi-RAM-0012_SetVolumeLabel_drive2
- COMMAND rfs2 Volume PBASE-F32-DualDrive-Publicapi-RAM-0012_Volume_drive2
- COMMAND rfs2 SetVolumeLabel PBASE-F32-DualDrive-Publicapi-RAM-0012_SetVolumeLabel_drive2
- COMMAND rfs2 Close
- COMMAND rfs2 ~
- END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0007
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0008
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0008
-//! @SYMAPI CFileMan:Move();RFile::Read();RFile::Write()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 02/07/2008
-//! @SYMTestCaseDesc Move the file from system drive to one of the dual drive concurrenlty with the read/write operation on another dual drive
-//!
-//! @SYMTestActions 1.Move the file from systemdrive to dual drive and back from dual drive to system drive.
-//! 2.Write and read the content of the file from other drive in concurrent with above action on another drive
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults File is moved in concurrent with read/write operation on another drive.
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT RFile file1
- CREATE_OBJECT CFileMan fileMan1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND rfs1 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0011_MkDir_drive1
- COMMAND file1 new
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0011_NewL_drive1
- COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move_drive1
- COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move2_drive1
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0011_Open2_drive1
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0011_RmDir_drive1
- COMMAND file1 Close
- COMMAND fileMan1 ~
- COMMAND file1 ~
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT RFile file2
- CREATE_OBJECT CFileMan fileMan2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND file2 new
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive2
- COMMAND file2 Close
- COMMAND file2 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive2
- COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive2
- COMMAND file2 Close
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive2
- COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive2
- COMMAND file2 Close
- COMMAND file2 ~
- COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive2
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0008
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0009
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0009
-//! @SYMAPI RFs::MkDirAll();TEntry::IsDir();RFs::RmDir()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 30/05/2008
-//! @SYMTestCaseDesc Try creating directory and removing directory with read and write operation concurrantly on dual drives.
-//!
-//! @SYMTestActions 1. Create RFs instance.
-//! 2. Call RFs::MkDirAll() to create the directories.
-//! 3. Check the directory created using TEntry()
-//! 4. Remove the directory.
-//! 5. Perform Read/Write operation on a file on different drive in concurrent with the above operation
-//!
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Creates the directories on to both the drives in concurrent with the read/write operation on the other drive.
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT TEntry tEntry1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll_drive1
- COMMAND tEntry1 new
- COMMAND rfs1 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry_drive1
- COMMAND tEntry1 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive1
- COMMAND tEntry1 ~
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir_drive1
- COMMAND rfs1 Close
- COMMAND rfs1 ~
- END_TEST_BLOCK
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT RFile file2
- CREATE_OBJECT CFileMan fileMan2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND file2 new
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive2
- COMMAND file2 Close
- COMMAND file2 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive2
- COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive2
- COMMAND file2 Close
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive2
- COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive2
- COMMAND file2 Close
- COMMAND file2 ~
- COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive2
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0009
-
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0010
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0010
-//! @SYMAPI CDirScan::SetScanDataL();CDirScan::NextL()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 02/07/2008
-//! @SYMTestCaseDesc Testcase to get the filtered list of filess from both the drives CONCURRENTly
-
-//! @SYMTestActions 1.Call Create a RFs session and call it's Connect() function.
-//! 2.Call RFs::MkDirAll() and <Drive>\dirscan\TempDir\ as parameter
-//! 3.Call CDirScan::NewL() and connected file server session as parameter.
-//! 4.Call CDirScan::SetScanDataL() and <Drive>\dirscan\ as first parameter, KEntryAttNormal as second
-//! parameter, ESortByName as third parameter and EScanDownTree as fourth parameter
-//! 5.Call CDirScan::NextL() and CDir object as parameter.
-//! 6.Call CDirScan::FullPath() to verify the expected directory path.
-//! 7.Call CDir::Count() to verify the number of entries returned.
-//! 8.Call CDir::operator[] to verify the entries returned.
-//! 9.Call RFs::RmDir() and <Drive>\dirscan\TempDir\ as parameter
-//! 10. Perform above operation on other drive concurrently
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Filters the file set with KEntryAttNormal as attribute mask on both the drives
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT CFileMan fileMan1
- CREATE_OBJECT TEntry tEntry1
- CREATE_OBJECT CDirScan cdirScan1
- CREATE_OBJECT CDir cdir1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll_drive1
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_NewL_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy1_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy2_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy3_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy4_drive1
- COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll2_drive1
- COMMAND tEntry1 new
- COMMAND cdirScan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_CDirScan_NewL_drive1
- COMMAND cdirScan1 SetScanDataL PBASE-F32-DualDrive-Publicapi-RAM-0015_SetScanDataL_drive1
- COMMAND cdirScan1 NextL PBASE-F32-DualDrive-Publicapi-RAM-0015_NextL_drive1
- COMMAND cdirScan1 FullPath PBASE-F32-DualDrive-Publicapi-RAM-0015_FullPath_drive1
- COMMAND cdir1 Count PBASE-F32-DualDrive-Publicapi-RAM-0015_Count_drive1
- COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index1_drive1
- COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index2_drive1
- COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index3_drive1
- COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index4_drive1
- COMMAND cdir1 ~
- COMMAND cdirScan1 ~
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir1_drive1
- COMMAND tEntry1 ~
- COMMAND fileMan1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0015_Delete_drive1
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir2_drive1
- COMMAND fileMan1 ~
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT CFileMan fileMan2
- CREATE_OBJECT TEntry tEntry2
- CREATE_OBJECT CDirScan cdirScan2
- CREATE_OBJECT CDir cdir2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy1_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy2_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy3_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy4_drive2
- COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll2_drive2
- COMMAND tEntry2 new
- COMMAND cdirScan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_CDirScan_NewL_drive2
- COMMAND cdirScan2 SetScanDataL PBASE-F32-DualDrive-Publicapi-RAM-0015_SetScanDataL_drive2
- COMMAND cdirScan2 NextL PBASE-F32-DualDrive-Publicapi-RAM-0015_NextL_drive2
- COMMAND cdirScan2 FullPath PBASE-F32-DualDrive-Publicapi-RAM-0015_FullPath_drive2
- COMMAND cdir2 Count PBASE-F32-DualDrive-Publicapi-RAM-0015_Count_drive2
- COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index1_drive2
- COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index2_drive2
- COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index3_drive2
- COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index4_drive2
- COMMAND cdir2 ~
- COMMAND cdirScan2 ~
- COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir1_drive2
- COMMAND tEntry2 ~
- COMMAND fileMan2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0015_Delete_drive2
- COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir2_drive2
- COMMAND fileMan2 ~
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0010
-
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0011
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0011
-//! @SYMAPI CDirScan::SetScanDataL();RFile::Read();RFile::Write()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 02/07/2008
-//! @SYMTestCaseDesc Testcase to get the filtered list of files in concurrant with read/write operation
-//! @SYMTestActions 1. Filter the files with attribute normal.
-//! 2. Perform write/ read operation in concurrant.
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Filters the file set with KEntryAttNormal as attribute mask in concurrant with read/write operation on another drive
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT CFileMan fileMan1
- CREATE_OBJECT TEntry tEntry1
- CREATE_OBJECT CDirScan cdirScan1
- CREATE_OBJECT CDir cdir1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll_drive1
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_NewL_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy1_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy2_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy3_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy4_drive1
- COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll2_drive1
- COMMAND tEntry1 new
- COMMAND cdirScan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_CDirScan_NewL_drive1
- COMMAND cdirScan1 SetScanDataL PBASE-F32-DualDrive-Publicapi-RAM-0015_SetScanDataL_drive1
- COMMAND cdirScan1 NextL PBASE-F32-DualDrive-Publicapi-RAM-0015_NextL_drive1
- COMMAND cdirScan1 FullPath PBASE-F32-DualDrive-Publicapi-RAM-0015_FullPath_drive1
- COMMAND cdir1 Count PBASE-F32-DualDrive-Publicapi-RAM-0015_Count_drive1
- COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index1_drive1
- COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index2_drive1
- COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index3_drive1
- COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index4_drive1
- COMMAND cdir1 ~
- COMMAND cdirScan1 ~
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir1_drive1
- COMMAND tEntry1 ~
- COMMAND fileMan1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0015_Delete_drive1
- COMMAND fileMan1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir2_drive1
- COMMAND fileMan1 ~
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT RFile file2
- CREATE_OBJECT CFileMan fileMan2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND file2 new
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive2
- COMMAND file2 Close
- COMMAND file2 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive2
- COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive2
- COMMAND file2 Close
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive2
- COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive2
- COMMAND file2 Close
- COMMAND file2 ~
- COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive2
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0011
-
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0012
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0012
-//! @SYMAPI CFileMan::Attribs();CFileMan::Copy();RFile::Read();RFile::Write()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 30/05/2008
-//! @SYMTestCaseDesc Copy files on to the drive in concurrent with read/write operation on the other drive.
-//!
-//! @SYMTestActions 1. Call Connect().
-//! 2. Call Copy() to copy files on to the mmc drives.
-//! 3. Perform read/write operation on the other drive concurrenlty
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Copying of file will be done concurranlty with the read/write operation
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT RFile file1
- CREATE_OBJECT CFileMan fileMan1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND file1 new
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0005_Open_drive1
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0005_NewL_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0005_Copy_drive1
- COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0005_Attribs_drive1
- COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0005_Delete_drive1
- COMMAND fileMan1 ~
- COMMAND file1 Close
- COMMAND file1 ~
- COMMAND rfs1 Close
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT RFile file2
- CREATE_OBJECT CFileMan fileMan2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND file2 new
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive2
- COMMAND file2 Close
- COMMAND file2 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive2
- COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive2
- COMMAND file2 Close
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive2
- COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive2
- COMMAND file2 Close
- COMMAND file2 ~
- COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive2
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0012
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0013
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0013
-//! @SYMAPI CFileMan::Attribs();CFileMan::Copy()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 30/05/2008
-//! @SYMTestCaseDesc Copies large file on to the drive in cuncurrent with read/write operation on the large file on the other drive.
-//!
-//! @SYMTestActions
-//! 1. Call Copy() to copy files on to the mmc drives.
-//! 2. Perform read/write operation on the other drive concurrenlty
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Copying of file will be done concurranlty with the read/write operation
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT RFile file1
- CREATE_OBJECT CFileMan fileMan1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND file1 new
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0020_Open_drive1
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0020_NewL_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0020_Copy_drive1
- COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0020_Attribs_drive1
- COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0020_Delete_drive1
- COMMAND fileMan1 ~
- COMMAND file1 Close
- COMMAND file1 ~
- COMMAND rfs1 Close
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT RFile file2
- CREATE_OBJECT CFileMan fileMan2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND file2 new
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0018_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0018_Copy_drive2
- COMMAND file2 Close
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
- COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0018_Write_drive2
- COMMAND file2 Close
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
- COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0018_Read_drive2
- COMMAND file2 Close
- COMMAND file2 ~
- COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0018_Delete_drive2
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0013
-
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0014
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0014
-//! @SYMAPI CFileMan:Move();RFile::Read();RFile::Write()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 03/07/2008
-//! @SYMTestCaseDesc Move the much large file in concurrant with the read/write operation on the file on another drive concurrenlty
-//!
-//! @SYMTestActions 1.Create a RFs session and call it's Connect() function.
-//! 2.Call CFileMan::NewL(RFs &aFs) and connected file server session as parameter.
-//! 3.Call CFileMan::Move() to move the file from system drive to one of the dual drive.
-//! 4.Perform Read/write operation on the other drive
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults File moving and read/write operation on diff drives performed successfully
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT RFile file1
- CREATE_OBJECT CFileMan fileMan1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND rfs1 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0021_MkDir_drive1
- COMMAND file1 new
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0021_NewL_drive1
- COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0021_Move_drive1
- COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0021_Move2_drive1
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0021_Open2_drive1
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0021_RmDir_drive1
- COMMAND file1 Close
- COMMAND fileMan1 ~
- COMMAND file1 ~
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT RFile file2
- CREATE_OBJECT CFileMan fileMan2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND file2 new
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0018_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0018_Copy_drive2
- COMMAND file2 Close
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
- COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0018_Write_drive2
- COMMAND file2 Close
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
- COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0018_Read_drive2
- COMMAND file2 Close
- COMMAND file2 ~
- COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0018_Delete_drive2
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0014
-
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0015
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0015
-//! @SYMAPI CDirScan::SetScanDataL;CDirScan::NextL()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 02/07/2008
-//! @SYMTestCaseDesc Testcase to get the filtered list of filess from both the drives concurrently
-
-//! @SYMTestActions 1.Call Create a RFs session and call it's Connect() function.
-//! 2.Call RFs::MkDirAll() and <Drive>\dirscan\TempDir\ as parameter
-//! 3.Call CDirScan::NewL() and connected file server session as parameter.
-//! 4.Call CDirScan::SetScanDataL() and <Drive>\dirscan\ as first parameter, KEntryAttReadOnly as second
-//! parameter, ESortByName as third parameter and EScanDownTree as fourth parameter
-//! 5.Call CDirScan::NextL() and CDir object as parameter.
-//! 6.Call CDirScan::FullPath() to verify the expected directory path.
-//! 7.Call CDir::Count() to verify the number of entries returned.
-//! 8.Call CDir::operator[] to verify the entries returned.
-//! 9.Call RFs::RmDir() and <Drive>\dirscan\TempDir\ as parameter
-//! 10. Perform above operation on both the drives concurrently
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Filters the file set with KEntryAttReadOnly as attribute mask on one drive and KEntryAttrNormal on other drives
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT CFileMan fileMan1
- CREATE_OBJECT TEntry tEntry1
- CREATE_OBJECT CDirScan cdirScan1
- CREATE_OBJECT CDir cdir1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0023_MkDirAll_drive1
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0023_NewL_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0023_Copy1_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0023_Copy2_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0023_Copy3_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0023_Copy4_drive1
- COMMAND rfs1 SetAtt PBASE-F32-DualDrive-Publicapi-RAM-0023_SetAtt1_drive1
- COMMAND rfs1 SetAtt PBASE-F32-DualDrive-Publicapi-RAM-0023_SetAtt2_drive1
- COMMAND tEntry1 new
- COMMAND cdirScan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0023_CDirScan_NewL_drive1
- COMMAND cdirScan1 SetScanDataL PBASE-F32-DualDrive-Publicapi-RAM-0023_SetScanDataL_drive1
- COMMAND cdirScan1 NextL PBASE-F32-DualDrive-Publicapi-RAM-0023_NextL_drive1
- COMMAND cdirScan1 FullPath PBASE-F32-DualDrive-Publicapi-RAM-0023_FullPath_drive1
- COMMAND cdir1 Count PBASE-F32-DualDrive-Publicapi-RAM-0023_Count_drive1
- COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0023_index1_drive1
- COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0023_index2_drive1
- COMMAND rfs1 SetAtt PBASE-F32-DualDrive-Publicapi-RAM-0023_SetAtt4_drive1
- COMMAND rfs1 SetAtt PBASE-F32-DualDrive-Publicapi-RAM-0023_SetAtt5_drive1
- COMMAND cdir1 ~
- COMMAND cdirScan1 ~
- COMMAND tEntry1 ~
- COMMAND fileMan1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0023_Delete_drive1
- COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0023_RmDir2_drive1
- COMMAND fileMan1 ~
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT CFileMan fileMan2
- CREATE_OBJECT TEntry tEntry2
- CREATE_OBJECT CDirScan cdirScan2
- CREATE_OBJECT CDir cdir2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy1_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy2_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy3_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy4_drive2
- COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll2_drive2
- COMMAND tEntry2 new
- COMMAND cdirScan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_CDirScan_NewL_drive2
- COMMAND cdirScan2 SetScanDataL PBASE-F32-DualDrive-Publicapi-RAM-0015_SetScanDataL_drive2
- COMMAND cdirScan2 NextL PBASE-F32-DualDrive-Publicapi-RAM-0015_NextL_drive2
- COMMAND cdirScan2 FullPath PBASE-F32-DualDrive-Publicapi-RAM-0015_FullPath_drive2
- COMMAND cdir2 Count PBASE-F32-DualDrive-Publicapi-RAM-0015_Count_drive2
- COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index1_drive2
- COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index2_drive2
- COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index3_drive2
- COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index4_drive2
- COMMAND cdir2 ~
- COMMAND cdirScan2 ~
- COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir1_drive2
- COMMAND tEntry2 ~
- COMMAND fileMan2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0015_Delete_drive2
- COMMAND fileMan2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir2_drive2
- COMMAND fileMan2 ~
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0015
-
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0017
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0017
-//! @SYMAPI RFormat::Open();RFormat::Next();RFile::Copy()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 03/07/2008
-//! @SYMTestCaseDesc Format the one drive concurrenlty with Copy operation on other drive.
-//! Uses API elements: Format()
-//! @SYMTestActions 1. Call Format() on the drive.
-//! 2. Try Copying files on to the other drive concurrantly with above operation
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults formats the one drive with the read/write operation on another drive concurrently.
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs1
- CREATE_OBJECT RFile file1
- CREATE_OBJECT CFileMan fileMan1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND file1 new
- COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0020_Open_drive1
- COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0020_NewL_drive1
- COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0020_Copy_drive1
- COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0020_Attribs_drive1
- COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0020_Delete_drive1
- COMMAND fileMan1 ~
- COMMAND file1 Close
- COMMAND file1 ~
- COMMAND rfs1 Close
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFormat format2
- CREATE_OBJECT RFs rfs2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND format2 new
- COMMAND format2 Open PBASE-F32-DualDrive-Publicapi-RAM-0004_Open_drive2
- COMMAND format2 Next
- COMMAND format2 Close
- COMMAND format2 ~
- COMMAND rfs2 Close
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0017
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0018
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0018
-//! @SYMAPI RFormat::Open();RFormat::Next();RFile::Read();RFile::Write()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 03/07/2008
-//! @SYMTestCaseDesc Format the one drive concurrenlty with read/write operation on large file on another drive.
-//! Uses API elements: Format()
-//! @SYMTestActions 1. Call Format() on the drive.
-//! 2. Try Writing and reading operation on the drive concurrantly with above operation
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults formats the one drive with the read/write operation on another drive concurrently.
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFormat format1
- CREATE_OBJECT RFs rfs1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND format1 new
- COMMAND format1 Open PBASE-F32-DualDrive-Publicapi-RAM-0004_Open_drive1
- COMMAND format1 Next
- COMMAND format1 Close
- COMMAND format1 ~
- COMMAND rfs1 Close
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFs rfs2
- CREATE_OBJECT RFile file2
- CREATE_OBJECT CFileMan fileMan2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND file2 new
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open_drive2
- COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0018_NewL_drive2
- COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0018_Copy_drive2
- COMMAND file2 Close
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
- COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0018_Write_drive2
- COMMAND file2 Close
- COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
- COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0018_Read_drive2
- COMMAND file2 Close
- COMMAND file2 ~
- COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0018_Delete_drive2
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0018
-
-START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0016
-//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0016
-//! @SYMAPI RFormat::Open();RFormat::Next()
-//! @SYMAuthor Nirmala Bailur
-//! @SYMCreationDate 30/05/2008
-//! @SYMTestCaseDesc Try to format both the drives.
-//! Uses API elements: Format()
-//! @SYMTestActions
-//! 1. Call Format() on both the drives.
-//! 2. Call Close().
-//! @SYMTestStatus Implemented
-//! @SYMTestPriority High
-//! @SYMTestExpectedResults Function Format() returns KErrNone and formats both the drives.
-//! @SYMTestType CIT
-CONCURRENT
-START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFormat format1
- CREATE_OBJECT RFs rfs1
- COMMAND rfs1 new
- COMMAND rfs1 Connect
- COMMAND format1 new
- COMMAND format1 Open PBASE-F32-DualDrive-Publicapi-RAM-0004_Open_drive1
- COMMAND format1 Next
- COMMAND format1 Close
- COMMAND format1 ~
- COMMAND rfs1 Close
- COMMAND rfs1 ~
-END_TEST_BLOCK
-START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
- CREATE_OBJECT RFormat format2
- CREATE_OBJECT RFs rfs2
- COMMAND rfs2 new
- COMMAND rfs2 Connect
- COMMAND format2 new
- COMMAND format2 Open PBASE-F32-DualDrive-Publicapi-RAM-0004_Open_drive2
- COMMAND format2 Next
- COMMAND format2 Close
- COMMAND format2 ~
- COMMAND rfs2 Close
- COMMAND rfs2 ~
-END_TEST_BLOCK
-CONSECUTIVE
-END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0016
-
-
-
-
-