--- a/baseintegtests/baseintegrationtest/testsuites/fat32/scripts/btfat32.script Tue Dec 08 08:11:42 2009 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,738 +0,0 @@
-//@file btfat32.script
-//! @SYMTestSuiteName PBASE-FAT32
-//! @SYMScriptTestEnvironment base
-
-LOAD_SUITE basetestfat32server
-
-START_TESTCASE PBASE-BPB-FATSz32-0278
-//! @SYMTestCaseID PBASE-BPB-FATSz32-0278
-//! @SYMTestCaseDesc Verify that the field containing the FAT32 32-bit count of sectors occupied by one FAT is zero.
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Calculate the 32-bit count of sectors occupied by one FAT
-//! 2. Read the field containing the FAT32 32-bit count of sectors occupied by one FAT
-//! 3. Compare the value calculated and the value obtained
-//! @SYMTestExpectedResults The calclulated value and the obtained value are equal
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_FATSz32
-RUN_TEST_STEP -1 basetestfat32server Calculate \basetest\basetestfat32config.ini BPB_FATSz32
-END_TESTCASE PBASE-BPB-FATSz32-0278
-
-
-START_TESTCASE PBASE-BPB-ExtFlags-0279
-//! @SYMTestCaseID PBASE-BPB-ExtFlags-0279
-//! @SYMTestCaseDesc Verify that the extension flags contain the correct values
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Format the drive and read the BPB_ExtFlags field
-//! 2. Read Bits 4-6
-//! 3. Read Bits 8-15
-//! @SYMTestExpectedResults These are as follows:
-//! 1. If bit 7 is zero, then bits 0-3 are zero. If bit 7 is 1,
-//! then bits 0-3 contain a zerobased number of the active FAT
-//! 2. Bits 4-6 are reserved and are therefore zero
-//! 3. Bits 8-15 are reserved and are therefore zero
-//! @SYMTestType CIT
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_ExtFlags_1
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini BPB_ExtFlags_1
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini BPB_ExtFlags_4
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini BPB_ExtFlags_6
-END_TESTCASE PBASE-BPB-ExtFlags-0279
-
-
-START_TESTCASE PBASE-Bit-CInShutBitMask-0280
-//! @SYMTestCaseID PBASE-Bit-CInShutBitMask-0280
-//! @SYMTestCaseDesc Verify the bits of the first reserved cluster FAT[0]
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions Dismount the files system correctly and read the first reserved cluster bit.
-//! @SYMTestExpectedResults 1. The first reserved cluster bit, FAT[0], is 1
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini Bit_CInShutBitMask
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini Bit_CInShutBitMask
-END_TESTCASE PBASE-Bit-CInShutBitMask-0280
-
-
-START_TESTCASE PBASE-Bit-CHrdErrBitMask-0281
-//! @SYMTestCaseID PBASE-Bit-CHrdErrBitMask-0281
-//! @SYMTestCaseDesc Verify the bits of the second reserved cluster FAT[0]
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions Read the second reserved cluster, FAT[1], in the FAT table
-//! @SYMTestExpectedResults FAT table cluster contains the EOF mark.
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini Bit_CHrdErrBitMask
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini Bit_CHrdErrBitMask
-END_TESTCASE PBASE-Bit-CHrdErrBitMask-0281
-
-
-START_TESTCASE PBASE-BPB-FSVer-0282
-//! @SYMTestCaseID PBASE-BPB-FSVer-0282
-//! @SYMTestCaseDesc Verifying that disk utilities respect the version number
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Read the version number.
-//! 2. Set the major version number to a value higher that already set only in the boot sector and
-//! then attempt to mount the volume
-//! 3. Set the major version number to a value higher that already set in both the boot sector and
-//! the backup boot sector and then attempt to mount the volume
-//! 4. Set the minor version number to a value higher that already set only in the boot sector and
-//! then attempt to operate on volumes
-//! 5. Set the minor version number to a value higher that already set in both the boot sector and
-//! the backup boot sector and then attempt to operate on volumes
-//! with a higher minor version number
-//! 6. Attempt to mount volume when it contains a version number that was defined at the time that the driver
-//! was written.
-//! @SYMTestExpectedResults With respect to the actions, they are as follows:
-//! 1. The version number is 0.0
-//! 2. The mount is successful as the backup boot sector is used
-//! 3. The mount is unsuccessful
-//! 4. The mount is successful as the backup boot sector is used
-//! 5. The mount is unsuccessful
-//! 6. The mount is successful
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_FSVer
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini BPB_FSVer
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BPB_FSVer
-RUN_TEST_STEP -1 basetestfat32server Mount \basetest\basetestfat32config.ini BPB_FSVer
-
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_FSVer
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BPB_FSVer
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BPB_FSVer_2b
-RUN_TEST_STEP -1 basetestfat32server Mount \basetest\basetestfat32config.ini BPB_FSVer_2b
-
-
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_FSVer_3
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BPB_FSVer_3
-RUN_TEST_STEP -1 basetestfat32server Mount \basetest\basetestfat32config.ini BPB_FSVer_3
-
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_FSVer_3b
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BPB_FSVer_3
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BPB_FSVer_3b
-RUN_TEST_STEP -1 basetestfat32server Mount \basetest\basetestfat32config.ini BPB_FSVer_3b
-
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_FSVer_4
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BPB_FSVer_4
-RUN_TEST_STEP -1 basetestfat32server Mount \basetest\basetestfat32config.ini BPB_FSVer_4
-END_TESTCASE PBASE-BPB-FSVer-0282
-
-
-START_TESTCASE PBASE-BPB-RootClus-0283
-//! @SYMTestCaseID PBASE-BPB-RootClus-0283
-//! @SYMTestCaseDesc Verify that disk repair utilities can easily find the root directory if the root cluster field gets zeroed
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Read the cluster number of the first cluster
-//! 2. Format the volume and mark cluster 2 asbad. Perform a quick format so that the bad cluster chains are kept and read the cluster number of the forst cluster.
-//! 3. Read the value of the cluster following the cluster ,marked as bad in the FAT table.
-//! @SYMTestExpectedResults These are as follows:
-//! 1. The cluster number of the first cluster is 2
-//! 2. Cluster number of the first cluster is 3.
-//! 3. Cluster contains the EOF mark (0x0FFFFFFF)
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_RootClus_1
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini BPB_RootClus_1
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BPB_RootClus_2
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_RootClus_2
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini BPB_RootClus_2
-END_TESTCASE PBASE-BPB-RootClus-0283
-
-
-START_TESTCASE PBASE-BPB-FSInfo-0284
-//! @SYMTestCaseID PBASE-BPB-FSInfo-0284
-//! @SYMTestCaseDesc Verify that the sector number of the FSINFO structure in the reserved area of the FAT32 volume is 1
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions Read the sector number of the FSINFO structure in the reserved area of the FAT32 volume
-//! @SYMTestExpectedResults Sector number is 1
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_FSInfo
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini BPB_FSInfo
-END_TESTCASE PBASE-BPB-FSInfo-0284
-
-
-START_TESTCASE PBASE-BPB_BkBootSec-0285
-//! @SYMTestCaseID PBASE-BPB_BkBootSec-0285
-//! @SYMTestCaseDesc Verify that the field points to the correct sector if a back-up boot sector exists.
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Read the field that indicates the sector number in the reserved area of the volume of a copy of the boot record.
-//! 2. Check to see if there is a copy of the boot record
-//! @SYMTestExpectedResults If the value obtained in action 1 is zero then there is no copy of the boot record
-//! and sector 6 is zero. If the value obtained in action 1 is not zero then it is 6 and there is a copy of the boot
-//! record in sector 6.
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_BkBootSec
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini BPB_BkBootSec
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini BPB_BkBootSec_i
-END_TESTCASE PBASE-BPB_BkBootSec-0285
-
-
-START_TESTCASE PBASE-BPB-Reserved-0286
-//! @SYMTestCaseID PBASE-BPB-Reserved-0286
-//! @SYMTestCaseDesc Verify that the formatting of a FAT32 volumes sets the field that is reserved for future expansion to zero.
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Perform a format of a FAT32 volume and read the field that is reserved for future expansion.
-//! 2. Perform a format of a FAT32 volume and, using raw disk access, set the field that is reserved for
-//! future expansion at offset 52 of the boot sector to 1. Following this check the integrity of the disk by
-//! calling RFs::CheckDisk().
-//! @SYMTestExpectedResults These are as follows
-//! 1. Field that is reserved for future expansion to is set to zero.
-//! 2. KErrCorrupt is returned
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_Reserved
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini BPB_Reserved
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BPB_Reserved_2
-RUN_TEST_STEP -1 basetestfat32server CheckDisk \basetest\basetestfat32config.ini BPB_Reserved_2
-END_TESTCASE PBASE-BPB-Reserved-0286
-
-
-START_TESTCASE PBASE-BPB-RootEntCnt-0287
-//! @SYMTestCaseID PBASE-BPB-RootEntCnt-0287
-//! @SYMTestCaseDesc Verify general characteristics of a FAT data structure.
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Read the first data cluster and note the cluster number by formatting the disk and creating a file
-//! 2. Read the BPB_RootEntCnt field at offset 17 of the boot sector and
-//! 3. Set the field BPB_RootEntCnt to a value other than zero and determine the integrity of the disk by calling RFs::CheckDisk().
-//! @SYMTestExpectedResults These are as follows
-//! 1. Cluster number is cluster 2
-//! 2. Value is 0
-//! 3. KErrUnknown
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BPB_RootEntCnt_2
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini BPB_RootEntCnt_2
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BPB_RootEntCnt_3
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BPB_RootEntCnt_3i
-RUN_TEST_STEP -1 basetestfat32server CheckDisk \basetest\basetestfat32config.ini BPB_RootEntCnt_3
-END_TESTCASE PBASE-BPB-RootEntCnt-0287
-
-
-START_TESTCASE PBASE-FAT32Cluster-0288
-//! @SYMTestCaseID PBASE-FAT32Cluster-0288
-//! @SYMTestCaseDesc Verify general cluster characteristics of a FAT32 file system
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Calculate the number of clusters that the FAT32 volume has
-//! 2. On a formatted volume, mark cluster 4 as bad. Following this create a file that is three clusters long.
-//! Using raw disk access, read the values of clusters 3 till 6 in the FAT table.
-//! @SYMTestExpectedResults These are as follows
-//! 1. Cluster number is cluster 2
-//! 2. Value is 0
-//! 3. KErrUnknown
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini FAT32Cluster_1
-RUN_TEST_STEP -1 basetestfat32server Calculate \basetest\basetestfat32config.ini FAT32Cluster_1
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini FAT32Cluster_2a
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini FAT32Cluster_2a
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini FAT32Cluster_2a
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini FAT32Cluster_2a
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini FAT32Cluster_2b
-END_TESTCASE PBASE-FAT32Cluster-0288
-
-
-START_TESTCASE PBASE-FSINFOSTRUC-1-0289
-//! @SYMTestCaseID PBASE-FSINFOSTRUC-1-0289
-//! @SYMTestCaseDesc Validate FAT32 FSInfo Sector Structure and Backup Boot Sector Parameters
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Read the lead signature, FSI_LeadSig at offset 0 of the FSInfo sector
-//! 2. Read the tail signature, FSI_LeadSig at offset 0 of the FSInfo sector
-//! 3. Read the FSI_StrucSig field at offset 484 of the FSInfo Sector,
-//! 4. Perform the following for the field that contains the last known cluster count on the volume
-//! a. Read the FSI_Free_Count field at offset 488 of the FSInfo sector
-//! b. Write a file of 3 clusters long. Following this use raw disk access to read the FSI_Free_Count field.
-//! c. Set the FSI_Free_count field to 0xFFFFFFFF and check the integrity of the disk.
-//! d. Set the field to a value greater than the cluster count and check the integrity of the disk by calling RFs::CheckDisk();
-//! 5. Perform the following for the field that indicates the cluster number at which the driver should start looking for a free cluster
-//! a. Read the FSI_Nxt_Free field at offset 492 of the FSInfo sector.
-//! b. Mark cluster 3 as bad with the value 0x0FFFFFF7. Perform a quick format and read the FSI_Nxt_Free field.
-//! c. Write a file that is 3 clusters long. Following this read the FSI_Nxt_Free field.
-//! @SYMTestExpectedResults These are as follows
-//! 1. Lead signature is 0x41615252
-//! 2. Tail signature is 0xAA550000
-//! 3. Field contains the value 0x61417272
-//! 4. The expected results from these actions are
-//! a. Either contains the cluster count or the value 0xFFFFFFFF
-//! b. Contains the cluster count minus 3
-//! c. Disk is not reported as corrupt
-//! d. Disk is reported as corrupt
-//! 5. The expected results for these actions are
-//! a. Driver starts looking at cluster 2
-//! b. Driver starts looking at cluster 4
-//! c. Driver starts looking at cluster 6
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini FSINFOSTRUC_1
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini FSINFOSTRUC_1
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini FSINFOSTRUC_2
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini FSINFOSTRUC_3
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini FSINFOSTRUC_4b
-RUN_TEST_STEP -1 basetestfat32server Calculate \basetest\basetestfat32config.ini FSINFOSTRUC_4b
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini FSINFOSTRUC_4c
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini FSINFOSTRUC_4c
-RUN_TEST_STEP -1 basetestfat32server CheckDisk \basetest\basetestfat32config.ini FSINFOSTRUC_4c
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini FSINFOSTRUC_4d
-RUN_TEST_STEP -1 basetestfat32server Calculate \basetest\basetestfat32config.ini FSINFOSTRUC_4d
-RUN_TEST_STEP -1 basetestfat32server CheckDisk \basetest\basetestfat32config.ini FSINFOSTRUC_4d
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini FSINFOSTRUC_5b
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini FSINFOSTRUC_5b
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini FSINFOSTRUC_5b
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini FSINFOSTRUC_5c
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini FSINFOSTRUC_5c
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini FSINFOSTRUC_5c
-END_TESTCASE PBASE-FSINFOSTRUC-1-0289
-
-
-START_TESTCASE PBASE-DIR-Name-0290
-//! @SYMTestCaseID PBASE-DIR-Name-0290
-//! @SYMTestCaseDesc Validate the values for the first byte of the short name field
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Write a file. Delete the file created and read the first byte of the sort name field.
-//! 2. Read the first byte of the short name field of an emty entry.
-//! 3. Write a file. Set the first byte of the short name field to a value less than 0x20 and attempt to open the file.
-//! 4. Write a file. Set the first byte of the short name field to 0x05 and attempt to open the file.
-//! 5. Write a file. Set the first byte of the shorname field to the values stated below and following this attempt to open the file.
-//! 0x22, 0x2A, 0x2B, 0x2C, 0x2E, 0x2F, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F, 0x5B, 0x5C, 0x5D, 0x7C.
-//! @SYMTestExpectedResults These are as follows
-//! 1. The first byte of the short name field is set to 0xE5
-//! 2. The first byte of the short name field is set to 0x00
-//! 3. File is reported as corrupt
-//! 4. File is opened
-//! 5. File is reported as corrupt in all cases
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Name_1
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Name_1
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini DIR_Name_1
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini DIR_Name_2
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Name_3
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Name_3
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Name_3
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Name_3
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Name_5i
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Name_5i
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Name_5i
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Name_5i
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Name_5ii
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Name_5ii
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Name_5ii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Name_5ii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Name_5iii
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Name_5iii
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Name_5iii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Name_5iii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Name_5iv
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Name_5iv
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Name_5iv
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Name_5iv
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Name_5v
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Name_5v
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Name_5v
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Name_5v
-END_TESTCASE PBASE-DIR-Name-0290
-
-
-START_TESTCASE PBASE-DIR-Attr-0291
-//! @SYMTestCaseID PBASE-DIR-Attr-0291
-//! @SYMTestCaseDesc Verify the parameters for the field that specifies the attributes of the file
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Create a test file, set the KEntryAttReadOnly attribute to the file and attempt to write to the file.
-//! 2. Create a test file, set the attribute KEntryAttHidden and perform a CDir listing excluding the KEntryAttHidden mask.
-//! 3. Create a test file, set the attribute KEntryAttSyste and check that the attributes have been changed
-//! 4. Create a test file, set the attribute KEntryAttDir and check that the attributes have been changed.
-//! 5. Create a test directory and check the attributes of the entry.
-//! 6. Set a file system label "X:TestLabel". Following this perform a raw read to look for the entry and read the attribute.
-//! 7. Attempt to create another entry with ATTR_VOLUME_ID set
-//! @SYMTestExpectedResults These are as follows
-//! 1. Write access is denied
-//! 2. The file does not appear in the listing
-//! 3. Attributes of the test file have been changed
-//! 4. Attributes of the test file are not changed
-//! 5. The attribute is specified as ATTR_DIRECTORY.
-//! 6. The attribute is specified as ATTR_VOLUME_ID.
-//! 7. Permission is denied to have more than one file specified with the attribute ATTR_VOLUME_ID.
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Attr_1
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Attr_1
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Attr_2
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Attr_2
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Attr_3
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Attr_3
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Attr_4
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Attr_4
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Attr_5
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Attr_5
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Attr_6
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Attr_6
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Attr_7
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Attr_7
-END_TESTCASE PBASE-DIR-Attr-0291
-
-
-START_TESTCASE PBASE-DIRSPECIALENT-0292
-//! @SYMTestCaseID PBASE-DIRSPECIALENT-0292
-//! @SYMTestCaseDesc Verify that if the directory is not in the root directory, 2 special entries are created in the first two
-//! 32-byte directory entries of the directory
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Perform a full format and create a directory. Using raw disk access read
-//! a. the first byte of the entry
-//! b. the 32nd byte of the entry
-//! 2. Attempt to create a file, using RFile::Write() with the following names
-//! a. "."
-//! b. ".."
-//! @SYMTestExpectedResults These are as follows
-//! 1. Two special entries are created in the first two 32-byte directory entries of the directory
-//! a. First directory has the name set to "."
-//! b. Second directory has the name set to ".."
-//! 2.
-//! a. File cannot be created, KErrBadName is returned
-//! b. File cannot be created, KErrBadName is returned
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIRSPECIALENT_1
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIRSPECIALENT_1
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini DIRSPECIALENT_1a
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini DIRSPECIALENT_1b
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIRSPECIALENT_2a
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIRSPECIALENT_2b
-END_TESTCASE PBASE-DIRSPECIALENT-0292
-
-
-START_TESTCASE PBASE-DIR-Date-0293
-//! @SYMTestCaseID PBASE-DIR-Date-0293
-//! @SYMTestCaseDesc Validating the date format
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions Create a file and using raw disk access, change the created date field and the modified date
-//! field in the entry various correct and incorrectvalues. Following this call the function RFs::Modified().
-//! @SYMTestExpectedResults These are as follows
-//! a. All correct values return the date written to the disk
-//! b. All incorrect values return the default vlaue 01/01/0000
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_1ai
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_1aii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Date_1aii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_1bi
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_1bii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Date_1bii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_1ci
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_1cii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Date_1cii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_2ai
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_2aii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Date_2aii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_2bi
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_2bii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Date_2bii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_2ci
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_2cii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Date_2cii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_2di
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_2dii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Date_2dii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_3ai
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_3aii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Date_3aii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Date
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_3bi
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Date_3bii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Date_3bii
-END_TESTCASE PBASE-DIR-Date-0293
-
-
-START_TESTCASE PBASE-DIR-Time-0294
-//! @SYMTestCaseID PBASE-DIR-Time-0294
-//! @SYMTestCaseDesc Validating the time format
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions Create a file and using raw disk access, change the created time field and the modified time
-//! field in the entry various correct and incorrectvalues. Following this call the function RFs::Modified().
-//! @SYMTestExpectedResults These are as follows
-//! a. All correct values return the time written to the disk
-//! b. All incorrect values return the default vlaue 00:00:00
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_1ai
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_1aii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Time_1aii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_1bi
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_1bii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Time_1bii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_1ci
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_1cii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Time_1cii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_2ai
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_2aii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Time_2aii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_2bi
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_2bii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Time_2bii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_2ci
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_2cii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Time_2cii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_3ai
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_3aii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Time_3aii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_3bi
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_3bii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Time_3bii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini DIR_Time
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_3bi
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini DIR_Time_3bii
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini DIR_Time_3bii
-END_TESTCASE PBASE-DIR-Time-0294
-
-
-START_TESTCASE PBASE-LDIR-0295
-//! @SYMTestCaseID PBASE-LDIR-0295
-//! @SYMTestCaseDesc Validate values for the long name field.
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Create a file that takes up 3 long directory entries. Read the first byte of the last long directory name.
-//! 2. Create a file that taked up 2 long directory entries. Delete the file and Read the fist byte of each long entry
-//! 3. Create a file that takes up 6long directory entries. Read the first byte of the last long entry and the first byte of the first
-//! long entry to check the range.
-//! 4. Create a file and read the attributes of the long directory entry at position 11 of the entry
-//! 5. Create a file and perform the following
-//! a) Read the field LDIR_FstClusLO at position 26 of the long directory entry
-//! b) Use raw disk access to write a value other than zero to the LDIR_FstClusLO field and
-//! following this check the integrity of the disk by calling RFs::CheckDisk().
-//! @SYMTestExpectedResults These are as follows
-//! 1. The value is masked witih 0x40 and is therefore 0x43
-//! 2. The first byte of each long entry is set to 0xE5
-//! 3. The first byte of the last long entry is 0x46 and the first byte of the first long entry is 0x01, indicating that the range is 1-6
-//! 4. The attribute is set to ATTR_LONG_NAME (0x0F)
-//! 5. The following is expected form the actions
-//! a. Value is 0x00
-//! b. Disk errors are reported
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini LDIR_1
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini LDIR_1
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini LDIR_1
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini LDIR_2a
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini LDIR_2a
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini LDIR_2a
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini LDIR_2ai
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini LDIR_2b
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini LDIR_2b
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini LDIR_2b
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini LDIR_2bi
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini LDIR_3
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini LDIR_3
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini LDIR_3
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini LDIR_3i
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini LDIR_4
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini LDIR_4
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini LDIR_4
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini LDIR_5
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini LDIR_5
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini LDIR_5
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini LDIR_5i
-RUN_TEST_STEP -1 basetestfat32server ReadFile \basetest\basetestfat32config.ini LDIR_5i
-END_TESTCASE PBASE-LDIR-0295
-
-
-START_TESTCASE PBASE-HighFourRes-0296
-//! @SYMTestCaseID PBASE-HighFourRes-0296
-//! @SYMTestCaseDesc Ensuring that the first 4 bytes from offset 36 cannot be any value other than zero
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions Format the volume and using raw disk access change the third cluster value in the FAT table to 0xFFFFFFFF.
-//! Following this perform a quick format and using raw disk access, read the third cluster value.
-//! @SYMTestExpectedResults Third cluster contains the value 0x0FFFFFFF
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini HighFourRes_a
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini HighFourRes_a
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini HighFourRes_a
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini HighFourRes_b
-RUN_TEST_STEP -1 basetestfat32server ReadRaw \basetest\basetestfat32config.ini HighFourRes_b
-END_TESTCASE PBASE-HighFourRes-0296
-
-
-START_TESTCASE PBASE-CorruptFatTable-0297
-//! @SYMTestCaseID PBASE-CorruptFatTable-0297
-//! @SYMTestCaseDesc Purposely corrupting file systems to ensure they are handled gracefully
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions These are as follows:
-//! 1. Purposely producing an incomplete FAT table and determine the integrity of the disk
-//! 2. Introducing 'garbage' material into the fat table and calling RFs::Checkdisk to determine the integrity of the disk
-//! 3. Purposely allowing the FAT table to point to positions that do not exist and determine the integrity of the disk
-//! 4. Marking blocks that are bad as good without performing a full low-level scan of the media and determine the integrity of the disk
-//! @SYMTestExpectedResults The disk is reported as corrupt in all cases
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini CorruptFatTable_1i
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini CorruptFatTable_1i
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini CorruptFatTable_1ii
-RUN_TEST_STEP -1 basetestfat32server CheckDisk \basetest\basetestfat32config.ini CorruptFatTable_1ii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini CorruptFatTable_2i
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini CorruptFatTable_2i
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini CorruptFatTable_2ii
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini CorruptFatTable_2iii
-RUN_TEST_STEP -1 basetestfat32server CheckDisk \basetest\basetestfat32config.ini CorruptFatTable_2iii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini CorruptFatTable_3i
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini CorruptFatTable_3i
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini CorruptFatTable_3ii
-RUN_TEST_STEP -1 basetestfat32server CheckDisk \basetest\basetestfat32config.ini CorruptFatTable_3ii
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini CorruptFatTable_4i
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini CorruptFatTable_4i
-RUN_TEST_STEP -1 basetestfat32server WriteFile \basetest\basetestfat32config.ini CorruptFatTable_4ii
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini CorruptFatTable_4ii
-RUN_TEST_STEP -1 basetestfat32server CheckDisk \basetest\basetestfat32config.ini CorruptFatTable_4iii
-END_TESTCASE PBASE-CorruptFatTable-0297
-
-START_TESTCASE PBASE-BadMedia-0298
-//! @SYMTestCaseID PBASE-BadMedia-0298
-//! @SYMTestCaseDesc Using unreadable or unusable media to ensure they are handled gracefully
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions Attempting to mount a file system on unreadable media
-//! @SYMTestExpectedResults The media is reported as unkown
-//! @SYMTestType CIT
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini BadMedia
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BadMedia
-RUN_TEST_STEP -1 basetestfat32server WriteRaw \basetest\basetestfat32config.ini BadMedia_i
-RUN_TEST_STEP -1 basetestfat32server CheckDisk \basetest\basetestfat32config.ini BadMedia
-RUN_TEST_STEP -1 basetestfat32server Mount \basetest\basetestfat32config.ini BadMedia
-END_TESTCASE PBASE-BadMedia-0298
-
-
-START_TESTCASE PBASE-Larger512-0299
-//! @SYMTestCaseID PBASE-Larger512-0299
-//! @SYMTestCaseDesc Ensuring FAT32 is only used when necessary
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions Mounting the file system on various size media
-//! @SYMTestExpectedResults The media is reported as unkown
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini Larger512
-RUN_TEST_STEP -1 basetestfat32server Larger512 \basetest\basetestfat32config.ini Larger512
-END_TESTCASE PBASE-Larger512-0299
-
-
-START_TESTCASE PBASE-FillDisk-0300
-//! @SYMTestCaseID PBASE-FillDisk-0300
-//! @SYMTestCaseDesc Ensuring that the disk can be filled to its maximum capacity
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions Perform the following actions on FAT32 media
-//! a. Filling the drive with one big file
-//! b. Check the size of the file
-//! @SYMTestExpectedResults These are as follows:
-//! a. The disk is full
-//! b. Size of the file is equal to the free space available on the disk before it has been filled
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini FillDisk
-RUN_TEST_STEP -1 basetestfat32server FillDisk \basetest\basetestfat32config.ini FillDisk
-RUN_TEST_STEP -1 basetestfat32server ClusterBound \basetest\basetestfat32config.ini ClusterBound_1
-END_TESTCASE PBASE-FillDisk-0300
-
-
-START_TESTCASE PBASE-ClusterBound-0301
-//! @SYMTestCaseID PBASE-ClusterBound-0301
-//! @SYMTestCaseDesc Testing the cluster boundary values
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions Perform the following actions on FAT32 media
-//! 1. Create one big file to fill the disk. Following this, create another file and attempt to write to this new file.
-//! 2. Create one big file to fill the disk then fill the root directory by creating many empty files. Following this attempt to create another file.
-//! @SYMTestExpectedResults The disk is full
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini FillDisk
-RUN_TEST_STEP -1 basetestfat32server FillDisk \basetest\basetestfat32config.ini FillDisk
-RUN_TEST_STEP -1 basetestfat32server ClusterBound \basetest\basetestfat32config.ini ClusterBound_1
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini FillDisk
-RUN_TEST_STEP -1 basetestfat32server FillDisk \basetest\basetestfat32config.ini FillDisk
-RUN_TEST_STEP -1 basetestfat32server ClusterBound \basetest\basetestfat32config.ini ClusterBound_2
-END_TESTCASE PBASE-ClusterBound-0301
-
-
-START_TESTCASE PBASE-RemoveMedia-0302
-//! @SYMTestCaseID PBASE-RemoveMedia-0302
-//! @SYMTestCaseDesc Sudden removal of removable media cards
-//! @SYMREQ REQ0000
-//! @SYMTestPriority High
-//! @SYMTestActions Perform the following actions on FAT32 media
-//! 1. Simulating the removal of a media card whilst operations are taking place
-//! @SYMTestExpectedResults The disk should not be corrupt
-//! @SYMTestType CIT
-//! @SYMTestStatus Implemented
-RUN_TEST_STEP -1 basetestfat32server Format \basetest\basetestfat32config.ini RemoveMedia
-Print DURING THIS TEST PLEASE REMOVE THE CARD
-RUN_TEST_STEP -1 basetestfat32server ReadWrite \basetest\basetestfat32config.ini RemoveMedia
-Print PLEASE INSERT THE CARD
-DELAY 3000
-RUN_TEST_STEP -1 basetestfat32server CheckDisk \basetest\basetestfat32config.ini RemoveMedia
-END_TESTCASE PBASE-RemoveMedia-0302
-
-