// Copyright (c) 2007-2010 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of the License "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
// @internalComponent
//
//
#include <e32std.h>
#include <e32std_private.h>
#include <u32std.h> // unicode builds
#include <e32base.h>
#include <e32base_private.h>
#include <e32Test.h> // RTest headder
#include "testcaseroot.h"
#include "testcasewd.h"
#include "testcase0466.h"
#include "OstTraceDefinitions.h"
#ifdef OST_TRACE_COMPILER_IN_USE
#include "testcase0466Traces.h"
#endif
// the name below is used to add a pointer to our construction method to a pointer MAP in
// the class factory
_LIT(KTestCaseId,"PBASE-USB_OTGDI-0466");
const TTestCaseFactoryReceipt<CTestCase0466> CTestCase0466::iFactoryReceipt(KTestCaseId);
CTestCase0466* CTestCase0466::NewL(TBool aHost)
{
if(gVerboseOutput)
{
OstTraceFunctionEntry0(CTESTCASE0466_NEWL);
}
CTestCase0466* self = new (ELeave) CTestCase0466(aHost);
CleanupStack::PushL(self);
self->ConstructL();
CleanupStack::Pop(self);
return self;
}
CTestCase0466::CTestCase0466(TBool aHost)
: CTestCaseRoot(KTestCaseId, aHost)
{
if(gVerboseOutput)
{
OstTraceFunctionEntry0(CTESTCASE0466_CTESTCASE0466);
}
}
/**
ConstructL
*/
void CTestCase0466::ConstructL()
{
if(gVerboseOutput)
{
OstTraceFunctionEntry0(CTESTCASE0466_CONSTRUCTL);
}
iWDTimer = CTestCaseWatchdog::NewL();
BaseConstructL();
}
CTestCase0466::~CTestCase0466()
{
if(gVerboseOutput)
{
OstTraceFunctionEntry0(CTESTCASE0466_DCTESTCASE0466);
}
Cancel();
delete iWDTimer;
}
void CTestCase0466::ExecuteTestCaseL()
{
if(gVerboseOutput)
{
OstTraceFunctionEntry0(CTESTCASE0466_EXECUTETESTCASEL);
}
iCaseStep = EPreconditions;
iRepeats = KOperationRetriesMax;
CActiveScheduler::Add(this);
SelfComplete();
}
void CTestCase0466::DescribePreconditions()
{
test.Printf(_L("BEFORE running this test\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS, "BEFORE running this test\n");
test.Printf(_L("\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS_DUP01, "\n");
test.Printf(_L("Insert the connector\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS_DUP02, "Insert the connector\n");
test.Printf(_L("from the OET with SW9\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS_DUP03, "from the OET with SW9\n");
test.Printf(_L("set to 'A-DEVICE' and\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS_DUP04, "set to 'A-DEVICE' and\n");
test.Printf(_L("all other switches OFF\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS_DUP05, "all other switches OFF\n");
test.Printf(_L("\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS_DUP06, "\n");
test.Printf(_L("Confirm passing tests\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS_DUP07, "Confirm passing tests\n");
test.Printf(_L("\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS_DUP08, "\n");
test.Printf(_L("ID_PIN detection\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS_DUP09, "ID_PIN detection\n");
test.Printf(_L("VBus Driving\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS_DUP10, "VBus Driving\n");
test.Printf(_L("\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_DESCRIBEPRECONDITIONS_DUP11, "\n");
}
void CTestCase0466::DoCancel()
{
if(gVerboseOutput)
{
OstTraceFunctionEntry0(CTESTCASE0466_DOCANCEL);
}
// cancel our timer
iTimer.Cancel();
}
// static cb helper
void CTestCase0466::CancelDrive(CTestCaseRoot *pThis)
{
CTestCase0466 * p = REINTERPRET_CAST(CTestCase0466 *,pThis);
// cancel any pending call, and then complete our active obj with a timeout value
p->SelfComplete(KTestCaseWatchdogTO);
}
// handle event completion
void CTestCase0466::RunStepL()
{
if(gVerboseOutput)
{
OstTraceFunctionEntry0(CTESTCASE0466_RUNSTEPL);
}
// Obtain the completion code for this CActive obj.
TInt completionCode(iStatus.Int());
TBuf<MAX_DSTRLEN> aDescription;
TInt err(0);
switch(iCaseStep)
{
case EPreconditions:
iCaseStep = ELoadLdd;
if (iAutomated)
{
iCaseStep = ELoadLdd;
SelfComplete();
break;
}
// prompt to insert connector
test.Printf(_L("\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP01, "\n");
test.Printf(KInsertAConnectorPrompt);
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP02, KInsertAConnectorPrompt);
test.Printf(_L("\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP03, "\n");
test.Printf(KPressAnyKeyToContinue);
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP04, KPressAnyKeyToContinue);
test.Printf(_L("\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP05, "\n");
RequestCharacter();
break;
case ELoadLdd:
if (!StepLoadLDD())
{
break;
}
iCaseStep = EDriveBus;
SelfComplete();
break;
// wait on
case EDriveBus:
// wait for 100 ms to allow the stack time to settle
User::After(100000);
// drive VBus
// NOTE: A-Plug must be inserted because it is illegal to power VBus unless
// A-Plug is detected (ID pin is low). The Thunk checks this.
err = otgBusRequest();
if (KErrNone != err)
{
return TestFailed(KErrAbort, _L("Raise VBus - RUsbOtgDriver::BusRequest() FAILED!"));
}
// wait for 1 second as described in the test document
User::After(1000000);
// subscribe to error events...
otgQueueOtgMessageRequest(iOTGMessage, iStatus);
SetActive();
// ...and tell user to apply load
test.Printf(_L("\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP06, "\n");
test.Printf(_L("************************\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP07, "************************\n");
test.Printf(_L("* Using SW4 on the OET *\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP08, "* Using SW4 on the OET *\n");
test.Printf(_L("* Apply 100mA LOAD now *\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP09, "* Apply 100mA LOAD now *\n");
test.Printf(_L("************************\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP10, "************************\n");
test.Printf(_L("\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP11, "\n");
iCaseStep = EVerifyBusFail;
break;
case EVerifyBusFail:
OtgMessageString(iOTGMessage, aDescription);
test.Printf(_L("Received message %d '%S' status(%d)\n"), iOTGMessage, &aDescription, completionCode);
OstTraceExt3(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP12, "Received message %d '%S' status(%d)\n", iOTGMessage, aDescription, completionCode);
if (RUsbOtgDriver::EMessageVbusError == iOTGMessage)
{
err = otgBusClearError();
if ( err )
{
return TestFailed(KErrAbort, _L("VBUS Error Clear - FAILED!"));
}
iCaseStep = EUnloadLdd;
SelfComplete();
}
else
{
iRepeats--;
if (iRepeats <0)
{
return TestFailed(KErrAbort, _L("VBUS Fall FAILED!"));
}
otgQueueOtgMessageRequest(iOTGMessage, iStatus);
SetActive();
iCaseStep = EVerifyBusFail;
}
break;
case EUnloadLdd:
if (EFalse == StepUnloadLDD())
{
return TestFailed(KErrAbort,_L("unload Ldd failure"));
}
// remove 100ma Load - this reminds the user
test.Printf(_L("\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP13, "\n");
test.Printf(_L("************************\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP14, "************************\n");
test.Printf(_L("* Using SW4 on the OET *\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP15, "* Using SW4 on the OET *\n");
test.Printf(_L("* Remove 100mA LOAD! *\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP16, "* Remove 100mA LOAD! *\n");
test.Printf(_L("************************\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP17, "************************\n");
test.Printf(_L("\n"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP18, "\n");
iCaseStep = ELastStep;
// press any key
test.Printf(KPressAnyKeyToContinue);
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP19, KPressAnyKeyToContinue);
RequestCharacter();
break;
case ELastStep:
return TestPassed();
default:
test.Printf(_L("<Error> unknown test step"));
OstTrace0(TRACE_NORMAL, CTESTCASE0466_RUNSTEPL_DUP20, "<Error> unknown test step");
Cancel();
return (TestFailed(KErrCorrupt, _L("<Error> unknown test step")));
}
}