diff -r 000000000000 -r a41df078684a kerneltest/e32test/usbho/t_otgdi/src/testcase0466.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/kerneltest/e32test/usbho/t_otgdi/src/testcase0466.cpp	Mon Oct 19 15:55:17 2009 +0100
@@ -0,0 +1,261 @@
+// Copyright (c) 2007-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of the License "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+// @internalComponent
+// 
+//
+
+#include <e32std.h>
+#include <e32std_private.h>
+#include <u32std.h> 	// unicode builds
+#include <e32base.h>
+#include <e32base_private.h>
+#include <e32Test.h>	// RTest headder
+#include "testcaseroot.h"
+#include "testcasewd.h"
+#include "testcase0466.h"
+
+
+
+// the name below is used to add a pointer to our construction method to a pointer MAP in 
+// the class factory
+_LIT(KTestCaseId,"PBASE-USB_OTGDI-0466");
+const TTestCaseFactoryReceipt<CTestCase0466> CTestCase0466::iFactoryReceipt(KTestCaseId);	
+
+CTestCase0466* CTestCase0466::NewL(TBool aHost)
+	{
+	LOG_FUNC
+	CTestCase0466* self = new (ELeave) CTestCase0466(aHost);
+	CleanupStack::PushL(self);
+	self->ConstructL();
+	CleanupStack::Pop(self);
+	return self;
+	}
+	
+
+CTestCase0466::CTestCase0466(TBool aHost)
+:	CTestCaseRoot(KTestCaseId, aHost)
+	{
+	LOG_FUNC
+		
+	} 
+
+
+/**
+ ConstructL
+*/
+void CTestCase0466::ConstructL()
+	{
+	LOG_FUNC
+	iWDTimer = CTestCaseWatchdog::NewL();
+	
+	BaseConstructL();
+	}
+
+
+CTestCase0466::~CTestCase0466()
+	{
+	LOG_FUNC
+
+	Cancel();
+	delete iWDTimer;
+	}
+
+
+void CTestCase0466::ExecuteTestCaseL()
+	{
+	LOG_FUNC
+	iCaseStep = EPreconditions;
+	
+	iRepeats = KOperationRetriesMax;
+	
+	CActiveScheduler::Add(this);
+	SelfComplete();
+
+	}
+
+
+void CTestCase0466::DescribePreconditions()
+	{
+	test.Printf(_L("BEFORE running this test\n"));
+	test.Printf(_L("\n"));
+	test.Printf(_L("Insert the connector\n"));
+	test.Printf(_L("from the OET with SW9\n"));
+	test.Printf(_L("set to 'A-DEVICE' and\n"));
+	test.Printf(_L("all other switches OFF\n"));
+	test.Printf(_L("\n"));
+	test.Printf(_L("Confirm passing tests\n"));
+	test.Printf(_L("\n"));
+	test.Printf(_L("ID_PIN detection\n"));
+	test.Printf(_L("VBus Driving\n"));
+	test.Printf(_L("\n"));
+	}
+
+	
+void CTestCase0466::DoCancel()
+	{
+	LOG_FUNC
+
+	// cancel our timer
+	iTimer.Cancel();
+	}
+	
+	// static cb helper
+void CTestCase0466::CancelDrive(CTestCaseRoot *pThis)
+	{
+	CTestCase0466 * p = REINTERPRET_CAST(CTestCase0466 *,pThis);
+	// cancel any pending call, and then complete our active obj with a timeout value
+	p->SelfComplete(KTestCaseWatchdogTO);
+	
+	}
+
+
+// handle event completion	
+void CTestCase0466::RunStepL()
+	{
+	LOG_FUNC
+	// Obtain the completion code for this CActive obj.
+	TInt completionCode(iStatus.Int()); 
+	TBuf<MAX_DSTRLEN> aDescription;
+	TInt err(0);
+			
+	switch(iCaseStep)
+		{
+		case EPreconditions:
+			iCaseStep = ELoadLdd;
+			if (iAutomated)
+				{
+				iCaseStep = ELoadLdd;
+				SelfComplete();
+				break;
+				}
+			// prompt to insert connector
+			test.Printf(_L("\n"));
+			test.Printf(KInsertAConnectorPrompt);
+			test.Printf(_L("\n"));
+			test.Printf(KPressAnyKeyToContinue);
+			test.Printf(_L("\n"));
+			RequestCharacter();			
+			break;
+			
+		case ELoadLdd:
+			if (!StepLoadLDD())
+				{
+				break;
+				}
+
+			iCaseStep = EDriveBus;
+			SelfComplete();
+			break;
+			
+			// wait on 
+		case EDriveBus:
+			// wait for 100 ms to allow the stack time to settle
+			User::After(100000);
+			
+			// drive VBus
+			// NOTE: A-Plug must be inserted because it is illegal to power VBus unless 
+			// A-Plug is detected (ID pin is low). The Thunk checks this.
+			err = otgBusRequest();
+			
+			if (KErrNone != err)
+				{
+				return TestFailed(KErrAbort, _L("Raise VBus - RUsbOtgDriver::BusRequest() FAILED!"));
+				}
+
+			// wait for 1 second as described in the test document
+			User::After(1000000);
+
+			// subscribe to error events...
+			otgQueueOtgMessageRequest(iOTGMessage, iStatus);
+			SetActive();
+
+			// ...and tell user to apply load	
+			test.Printf(_L("\n"));
+			test.Printf(_L("************************\n"));
+			test.Printf(_L("* Using SW4 on the OET *\n"));
+			test.Printf(_L("* Apply 100mA LOAD now *\n"));
+			test.Printf(_L("************************\n"));
+			test.Printf(_L("\n"));
+			
+			iCaseStep = EVerifyBusFail;
+			
+			break;
+			
+		case EVerifyBusFail:
+		
+			OtgMessageString(iOTGMessage, aDescription);
+			test.Printf(_L("Received message %d '%S' status(%d)\n"), iOTGMessage, &aDescription, completionCode);
+
+			if (RUsbOtgDriver::EMessageVbusError == iOTGMessage)
+				{
+				err = otgBusClearError();
+				
+				if ( err )
+					{
+					return TestFailed(KErrAbort, _L("VBUS Error Clear - FAILED!"));
+					}
+
+				iCaseStep = EUnloadLdd;
+				SelfComplete();
+				}
+			else
+				{
+				iRepeats--;
+				if (iRepeats <0)
+					{
+					return TestFailed(KErrAbort, _L("VBUS Fall FAILED!"));
+					}
+
+				otgQueueOtgMessageRequest(iOTGMessage, iStatus);
+				SetActive();
+
+				iCaseStep = EVerifyBusFail;
+				}
+
+			break;
+			
+		case EUnloadLdd:
+			
+			if (EFalse == StepUnloadLDD())
+				{
+				return TestFailed(KErrAbort,_L("unload Ldd failure"));
+				}
+
+			// remove 100ma Load - this reminds the user
+			test.Printf(_L("\n"));
+			test.Printf(_L("************************\n"));
+			test.Printf(_L("* Using SW4 on the OET *\n"));
+			test.Printf(_L("* Remove 100mA LOAD!   *\n"));
+			test.Printf(_L("************************\n"));
+			test.Printf(_L("\n"));
+			
+			iCaseStep = ELastStep;
+			// press any key
+			test.Printf(KPressAnyKeyToContinue);
+			RequestCharacter();			
+			break;
+			
+		case ELastStep:
+			return TestPassed();
+			
+		default:
+			test.Printf(_L("<Error> unknown test step"));
+			Cancel();
+			return (TestFailed(KErrCorrupt, _L("<Error> unknown test step")));
+
+		}
+
+	}
+
+