// Copyright (c) 2006-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

LOAD_SUITE LbsAssDataTestServer -SharedData

PRINT Run LbsAssDataTestServer

PRINT

//Before we start LBS, select the test A-GPS integration module and network reg status txt file to use.

PREFIX RUN_UTILS

	MkDir c:\private\10282253\

	MkDir c:\private\10282253\lbs\

	MkDir c:\private\10282253\lbs\locmods\

	CopyFile c:\testdata\configs\xtestmodule.ini c:\private\10282253\lbs\locmods\agpsintegmodule.ini

    CopyFile c:\testdata\configs\lbstestconfig.txt c:\config.txt 

	DeleteFile c:\private\10282253\lbs\lbsprofile.ini

REMOVE_PREFIX

// Reset admin then select the privacy controller (reset will give us the EGpsPreferTerminalBased).

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_ResetDefaultAdmin

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_SetPrivacyHandler c:\testdata\configs\lbsassdata.ini LBS-Ass-Data

RUN_TEST_STEP 030 LbsAssDataTestServer LbsStep_StartLbs

START_TESTCASE LBS-AssistanceData-0101

//!@SYMTestCaseID			LBS-AssistanceData-0101

//!@SYMTestCaseDesc			Empty GPS assistance data cache test

//!

//!@SYMTestActions			1. Connect to the location server.

//!					2. Invoke a MO-LR using the self locate API. This will cause the A-GPS test module to

//!					   receive a position update request.

//!					3. Within the A-GPS test module attempt to read some assistance data, and verify result

//!					   as below.

//!					   Note: call GetAssistanceDataItem(), from within RequestLocationUpdate().

//!					4. Close the server connection.

//!

//!@SYMTestExpectedResults	Verify the correct not found error (KErrNotFound) is returned for step 3.

//!@SYMPREQ					PREQ928

//!@SYMREQ					REQ928.06

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			2

//!@SYMTestStatus			Implemented.

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsassdata.ini LBS-Ass-Data

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0040

RUN_TEST_STEP 020 LbsAssDataTestServer LbsAssDataStep_Main c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0040

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyPosInfos

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-AssistanceData-0101

//START_TESTCASE LBS-AssistanceData-0002

//!@SYMTestCaseID			LBS-AssistanceData-0002

//!@SYMTestCaseDesc			A-GPS module creation and destruction

//!

//!@SYMTestActions			1. Start LBS sub-system, verify the creation of the test module.

//!							2. Shutdown the LBS sub-system, verify the destruction of the test module.

//!

//!@SYMTestExpectedResults	Ensure the correct creation and destruction of the test module as per steps 1 and 2.

//!@SYMPREQ					PREQ928

//!@SYMREQ					REQ928.03

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			2

//!@SYMTestStatus			Not Implemented. Note: start and shutdown of LBS sub-system may not be enough to

//!							create and destroy the module. For example MLbsLocationSourceGpsObserver::Shutdown()

//!							may have to called by the module.

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_InstallScheduler

//RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsassdata.ini LBS-Ass-Data

//RUN_TEST_STEP 020 LbsAssDataTestServer LbsAssDataStep_Main c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0001

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyLogInfo

//END_TESTCASE LBS-AssistanceData-0002

START_TESTCASE LBS-AssistanceData-0102

//!@SYMTestCaseID			LBS-AssistanceData-0102

//!@SYMTestCaseDesc			Verify a single batch of GPS assistance data

//!

//!@SYMTestActions			1. Configure the network simulator to deliver a single subset of assistance data. The

//!					   subset data should be chosen to ensure only one batch is delivered to the A-GPS

//!					   test module.

//!					2. Connect to the location server.

//!					3. Invoke a MO-LR using the self locate API. This will cause the A-GPS test module to

//!					   request assistance data as a result of the position update request.

//!					   Note: use RequestAssistanceData().

//!					4. Wait for the "assistance data arrived" event within the A-GPS test module, then read

//!					   and verify the assistance data.

//!					   Note: implement AssistanceDataEvent() and call GetAssistanceDataItem().

//!					5. Process the position update produced as a result of the MO-LR, close the server

//!					   connection.

//!

//!@SYMTestExpectedResults	Verify the assistance data in step 4 against the configured network simulator data.

//!							Also ensure the correct assistance data information is logged. Note: use the RDataReader

//!							class; the TEF test step will need to verify the data via the A-GPS test module in some

//!							manner

//!@SYMPREQ					PREQ928

//!@SYMREQ					REQ928.03

//!@SYMREQ					REQ928.05

//!@SYMREQ					REQ928.06

//!@SYMREQ					REQ928.10

//!@SYMPREQ					PREQ89

//!@SYMREQ					REQ89.06

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus			Implemented.

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsassdata.ini LBS-Ass-Data

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0010

RUN_TEST_STEP 020 LbsAssDataTestServer LbsAssDataStep_Main c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0010

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyPosInfos

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-AssistanceData-0102

//START_TESTCASE LBS-AssistanceData-0004

//!@SYMTestCaseID			LBS-AssistanceData-0004

//!@SYMTestCaseDesc			Verify multiple batches of GPS assistance data

//!

//!@SYMTestActions			1. Configure the network simulator to deliver a single subset of assistance data. The

//!								subset data should be chosen to ensure multiple batches are delivered to the A-GPS

//!								test module.

//!							2. Connect to the location server.

//!							3. Invoke a MO-LR using the self locate API. This will cause the A-GPS test module to

//!								request assistance data as a result of the position update request.

//!								Note: use RequestAssistanceData().

//!							4. Wait for the "assistance data arrived" event within the A-GPS test module, then read

//!								and verify the assistance data.

//!								Note: implement AssistanceDataEvent() and call GetAssistanceDataItem().

//!							5. Repeat step 4 until all assistance data as been processed.

//!							6. Process the position update produced as a result of the MO-LR, close the server

//!								connection.

//!

//!@SYMTestExpectedResults	Verify the assistance data in steps 4 and 5 against the configured network simulator data.

//!							Also ensure the correct assistance data information is logged.

//!@SYMPREQ					PREQ928

//!@SYMREQ					REQ928.03

//!@SYMREQ					REQ928.05

//!@SYMREQ					REQ928.06

//!@SYMREQ					REQ928.10

//!@SYMPREQ					PREQ89

//!@SYMREQ					REQ89.06

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus			Not Implemented.

// may not be possible to test, we may not have this level of control when using the netsim

//END_TESTCASE LBS-AssistanceData-0004

//START_TESTCASE LBS-AssistanceData-0005

//!@SYMTestCaseID			LBS-AssistanceData-0005

//!@SYMTestCaseDesc			Cancel assistance data request test	PREQ 928

//!

//!@SYMTestActions			1. Connect to the location server.

//!					2. Invoke a MO-LR using the self locate API. This will cause the A-GPS test module to

//!					   request assistance data as a result of the position update request.

//!					   Note: use RequestAssistanceData().

//!					3. Invoke the cancel by passing 0 for the aDataItemMask parameter to the

//!					   RequestAssistanceData() function.

//!

//!@SYMTestExpectedResults	Verify no assistance data was not received, AssistanceDataEvent() was not called.

//!				Note: Cancel may result in a AssistanceDataEvent() being called, if so verify by looking

//!				for a MO-LR release from the network simulator.

//!@SYMREQ				REQ928.04

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			2

//!@SYMTestStatus			Removed - because of new behaviour as a result of CR946.

//

//							In the past assistance data could be cancel by cancelling the current MOLR being processed by the 

//							protocol module, assistance data can now be cancelled without cancelling the MOLR, however this test

//							case and the test module does not support this. 

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_InstallScheduler

//RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsassdata.ini LBS-Ass-Data

//RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0012

//RUN_TEST_STEP 020 LbsAssDataTestServer LbsAssDataStep_Main c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0012

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyPosInfos

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyLogInfo

//END_TESTCASE LBS-AssistanceData-0005

START_TESTCASE LBS-AssistanceData-0103

//!@SYMTestCaseID			LBS-AssistanceData-0103

//!@SYMTestCaseDesc			Verify unsolicited GPS assistance data

//!

//!@SYMTestActions			1. Configure the network simulator to deliver a single subset of assistance data. The

//!								subset data should be chosen to ensure only one batch is delivered to the A-GPS

//!								test module.

//!							2. Invoke a MT-LR using the network simulator. This will cause the A-GPS test module to receive an unsolicited batch of GPS assistance data.

//!							3. Wait for the "assistance data arrived" event within the A-GPS test module, then read and verify the assistance data.

//!								Note: implement AssistanceDataEvent() and call GetAssistanceDataItem().

//!							4. Process the position update produced as a result of the MT-LR, using the network simulator.

//!								Note: may have to process the privacy and MT-LR position up via the network/privacy API.

//!

//!@SYMTestExpectedResults	Verify the assistance data in step 3 against the configured network simulator data.

//!							Note the unsolicited data may result in a log entry as per REQ928.10 - check.

//!@SYMPREQ					PREQ928

//!@SYMREQ					REQ928.05

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus			Implemented.

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsassdata.ini LBS-Ass-Data

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0020

RUN_TEST_STEP 020 LbsAssDataTestServer LbsAssDataStep_Main c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0020

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-AssistanceData-0103

START_TESTCASE LBS-AssistanceData-0104

//!@SYMTestCaseID			LBS-AssistanceData-0104

//!@SYMTestCaseDesc			Verify the GPS assistance data time stamp

//!

//!@SYMTestActions			1. Configure the network simulator to deliver a single subset of assistance data. The

//!								subset data should be chosen to ensure only one batch is delivered to the A-GPS

//!								test module.

//!							2. Connect to the location server.

//!							3. Invoke a MO-LR using the self locate API. This will cause the A-GPS test module to

//!								request assistance data as a result of the position update request.

//!								Note: use RequestAssistanceData().

//!							4. Wait for the "assistance data arrived" event within the A-GPS test module, then read

//!								and verify the assistance data time stamp.

//!								Note: implement AssistanceDataEvent() and call GetAssistanceDataItemTimeStamp().

//!							5. Process the position update produced as a result of the MO-LR, close the server

//!								connection.

//!

//!@SYMTestExpectedResults	Verify the assistance data time stamp in step 4 falls between request time and current time.

//!@SYMPREQ					PREQ928

//!@SYMREQ					REQ928.03

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			2

//!@SYMTestStatus			Implemented.

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsassdata.ini LBS-Ass-Data

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0030

RUN_TEST_STEP 020 LbsAssDataTestServer LbsAssDataStep_Main c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0030

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyPosInfos

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-AssistanceData-0104

START_TESTCASE LBS-AssistanceData-0105

//!@SYMTestCaseID			LBS-AssistanceData-0105

//!@SYMTestCaseDesc			Request GPS assistance data when no network available

//!

//!@SYMTestActions			1. Configure network simulation to ensure it does not deliver assistance data.

//!							2. Connect to the location server.

//!							3. Invoke a MO-LR using the self locate API. This will cause the A-GPS test module to

//!								receive a position update request.

//!							4. Within the A-GPS test module attempt to read some assistance data, and verify result

//!								as below.

//!								Note: call GetAssistanceDataItem(), from within RequestLocationUpdate().

//!							5. Close the server connection.

//!

//!@SYMTestExpectedResults	Verify the correct data not available error is returned for step 3.

//!@SYMPREQ					PREQ928

//!@SYMREQ					REQ928.03

//!@SYMREQ					REQ928.05

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			2

//!@SYMTestStatus			Not Implemented.

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsassdata.ini LBS-Ass-Data

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0041

RUN_TEST_STEP 020 LbsAssDataTestServer LbsAssDataStep_Main c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0041

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyPosInfos

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-AssistanceData-0105

START_TESTCASE LBS-AssistanceData-0106

//!@SYMTestCaseID			LBS-AssistanceData-0106

//!@SYMTestCaseDesc			Request multiple items of GPS assistance data when not all of the itmes are available.

//!

//!@SYMTestActions			1. Configure the network simulator to deliver 2 items of assistance data.

//!							2. Connect to the location server.

//!							3. Invoke a MO-LR using the self locate API. This will cause the A-GPS test module to

//!								request assistance data as a result of the position update request. Request 3 items

//!								of assistance data.

//!								Note: use RequestAssistanceData() with a suitable mask value.

//!							4. Wait for the "assistance data arrived" event within the A-GPS test module, then read

//!								and verify the assistance data.

//!								Note: implement AssistanceDataEvent() and call GetAssistanceDataItem().

//!							5. Process the position update produced as a result of the MO-LR, close the server

//!								connection.

//!

//!@SYMTestExpectedResults	Verify the assistance data in steps 4. Ensure only 2 items of assistance data are given,

//! 						and a error is reported for the 3rd requested item. Also ensure the correct assistance data

//!							information is logged.

//!

//!@SYMPREQ					PREQ928

//!@SYMREQ					REQ928.03

//!@SYMREQ					REQ928.05

//!@SYMREQ					REQ928.10

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			2

//!@SYMTestStatus			Implemented.

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsassdata.ini LBS-Ass-Data

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0042

RUN_TEST_STEP 020 LbsAssDataTestServer LbsAssDataStep_Main c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0042

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyPosInfos

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-AssistanceData-0106

START_TESTCASE LBS-AssistanceData-0107

//!@SYMTestCaseID			LBS-AssistanceData-0107

//!@SYMTestCaseDesc			Request assistance data, upper boundary test

//!

//!@SYMTestActions			1. Connect to the location server.

//!					2. Invoke a MO-LR using the self locate API. This will cause the A-GPS test module to

//!					   receive a position update request.

//!					3. Pass the EAssistanceDataPositionGpsUtcModel + 0x200 (to ensure an unknown bit is set)

//!					   for the aDataItemMask parameter to the RequestAssistanceData() function.

//!					   Note: call from RequestLocationUpdate().

//!

//!@SYMTestExpectedResults	Verify the bad request results in the correct assistance data event call with

//!							a KErrNotFound err given. 

//!@SYMPREQ					PREQ928

//!@SYMREQ					REQ928.03

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			2

//!@SYMTestStatus			Implemented

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_StopLbs

RUN_TEST_STEP 030 LbsAssDataTestServer LbsStep_StartLbs

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsassdata.ini LBS-Ass-Data

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0050

RUN_TEST_STEP 020 LbsAssDataTestServer LbsAssDataStep_Main c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0050

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyPosInfos

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-AssistanceData-0107

START_TESTCASE LBS-AssistanceData-0108

//!@SYMTestCaseID			LBS-AssistanceData-0108

//!@SYMTestCaseDesc			Get assistance data item, upper boundary test

//!

//!@SYMTestActions			1. Connect to the location server.

//!					2. Invoke a MO-LR using the self locate API. This will cause the A-GPS test module to

//!					   request assistance data as a result of the position update request.

//!					   Note: use RequestAssistanceData().

//!					3. Wait for the "assistance data arrived" event within the A-GPS test module,

//!					   from here attempt to get assistance using a invalid item flag.

//!					   Note: implement AssistanceDataEvent() and call GetAssistanceDataItem().

//!

//!@SYMTestExpectedResults	Verify the call fails in step 3.

//!@SYMPREQ					PREQ928

//!@SYMREQ					REQ928.03

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			2

//!@SYMTestStatus			Implemented

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_InstallScheduler

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsassdata.ini LBS-Ass-Data

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0051

RUN_TEST_STEP 020 LbsAssDataTestServer LbsAssDataStep_Main c:\testdata\configs\lbsassdata.ini LBS-Ass-Data-0051

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyPosInfos

//RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_VerifyLogInfo

END_TESTCASE LBS-AssistanceData-0108

START_TESTCASE LBS-AssistanceData-0109

//!@SYMTestCaseID			LBS-AssistanceData-0109

//!@SYMTestCaseDesc			Place holder for Assistance Data Reuse test

//!@SYMTestActions			1. ---.

//!

//!@SYMTestExpectedResults	

//!@SYMPREQ					PREQ 928

//!@SYMREQ					REQ 928.08

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus			Not Implemented - need to determine how this maybe tested from an integration test case.

END_TESTCASE LBS-AssistanceData-0109

START_TESTCASE LBS-AssistanceData-0110

//!@SYMTestCaseID			LBS-AssistanceData-0110

//!@SYMTestCaseDesc			Place holder for Assistance Data Security test

//!@SYMTestActions			1. ---.

//!

//!@SYMTestExpectedResults	

//!@SYMPREQ					PREQ 928

//!@SYMREQ					REQ 928.09

//!

//!@SYMTestType				CIT

//!@SYMTestPriority			1

//!@SYMTestStatus			Not Implemented - need to determine how this maybe tested, it's a mmp file build time issue, runtime dll loading issue.

END_TESTCASE LBS-AssistanceData-0110

RUN_TEST_STEP 010 LbsAssDataTestServer LbsStep_ResetDefaultAdmin

PRINT Stop LBS

RUN_TEST_STEP 020 LbsAssDataTestServer LbsStep_StopLbs

// Re-select the real A-GPS integration module.

RUN_UTILS DeleteFile c:\private\10282253\lbs\locmods\agpsintegmodule.ini

// Delete network registration status text file

RUN_UTILS DeleteFile c:\config.txt