// Copyright (c) 2006-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// @file ctlbsconflictstepx3pushpush.cpp

// This is the class implementation for the Module Information Tests

// EPOC includes.

// 

//

// LBS includes. 

#include <lbs.h>

#include <lbs/lbsnetcommon.h>

#include <lbssatellite.h>

#include <lbs/lbsnetprotocolbase.h>

#include <lbs/lbsassistancedatabuilderset.h>

#include <e32math.h>

// LBS test includes.

#include "ctlbsconflictstepx3ppushpush.h"

#include <lbs/test/tlbsutils.h>

/**	Test case development notes

	===========================

	It was decided to aid readablity each test class shall only support a single test case.

	This example has been produced to show how a typical conflict test case should be coded.

	Net Sim and Sequence Events

	---------------------------

	Every test case implementation will use the ctlbsconflictstep class which supports Net Sim

	interactions and a way to ensure Net Sim events and client completion events have a occured

	in the correct order. An array is used to hold the expected sequence event values, and a second

	array contains the actual events produced during the test. Once the test moves into the EWaiting

	state typically after all the client requests have been made, the event arrays are compared to

	ensure the correct events were given.

	To set the expected sequence events populate the array in the SetExpectedSeq() function.

	Async wappers

	-------------

	Each Lbs client async request is wappared in a active object class, to allow a number of

	outstanding async requests during the test. Any async calls you wish to make should also

	be wrapped in the same way, see CT_LbsDoX3P and CT_LbsDoPosUpdate for examples.

	These classes are constructed in the test class ConstructL, and maybe started or cancelled

	during the test at any point.

	Verify Position Information

	---------------------------

	A test should verify each client call which expected a location to be returned. The

	location data should be validation to ensure it's correct. See VerifyPosInfos.

*/

/**

Static Constructor

*/

CT_LbsConflictStep_X3PPushPush* CT_LbsConflictStep_X3PPushPush::New(CT_LbsConflictServer& aParent)

	{

	// Note the lack of ELeave.

	// This means that having insufficient memory will return NULL;

	CT_LbsConflictStep_X3PPushPush* testStep = new CT_LbsConflictStep_X3PPushPush(aParent);

	if (testStep)

		{

		TInt err = KErrNone;

		TRAP(err, testStep->ConstructL());

		if (err)

			{

			delete testStep;

			testStep = NULL;

			}

		}

	return testStep;

	}

/**

 * Constructor

 */

CT_LbsConflictStep_X3PPushPush::CT_LbsConflictStep_X3PPushPush(CT_LbsConflictServer& aParent) : CT_LbsConflictStep(aParent)

	{

	SetTestStepName(KLbsConflictStep_X3PPushPush);

	}

void CT_LbsConflictStep_X3PPushPush::ConstructL()

	{

	// Create the base class objects.

	CT_LbsConflictStep::ConstructL();

	// X3P async wrappers.

	iDoX3PPush = CT_LbsDoX3P::NewL(this, KLbsConflictX3PPushId);	

	iDoX3PPush2 = CT_LbsDoX3P::NewL(this, KLbsConflictX3PPush2Id);

	}

/**

 * Destructor

 */

CT_LbsConflictStep_X3PPushPush::~CT_LbsConflictStep_X3PPushPush()

	{

	iDoX3PPush->Cancel();

	delete iDoX3PPush;

	iDoX3PPush2->Cancel();

	delete iDoX3PPush2;

	}

/** Expected sequence events.

*/

void CT_LbsConflictStep_X3PPushPush::SetExpectedSeq()

	{

	// X3P Push (iState = EReqX3PPush)

	SetVerifySeqEvent(EX3P_PUSH_MOLR_NetSim_Got_NotifyRegisterLcsMoLr);				// --> To Net

	SetVerifySeqEvent(EX3P_PUSH_MOLR_NetSim_Got_NotifyMeasurementControlLocation);	// <-- From Net

	SetVerifySeqEvent(EX3P_PUSH_MOLR_NetSim_Got_NotifyMeasurementReportLocation);	// --> To Net

	SetVerifySeqEvent(EX3P_PUSH_MOLR_NetSim_Got_NotifyFacilityLcsMoLrResult);

	SetVerifySeqEvent(EX3P_PUSH_MOLR_NetSim_Got_NotifyReleaseLcsMoLr);				// --> To Net

	// followed by a X3P Push2 (after X3P Push register iState = ERegX3PPush),

	// X3P(Push2) should be queued and handled after the X3P(Push)

	SetVerifySeqEvent(EX3P_PUSH2_MOLR_NetSim_Got_NotifyRegisterLcsMoLr);				// --> To Net	

	SetVerifySeqEvent(EX3P_PUSH2_MOLR_NetSim_Got_NotifyMeasurementControlLocation);	// <-- From Net

	SetVerifySeqEvent(EX3P_PUSH2_MOLR_NetSim_Got_NotifyMeasurementReportLocation);	// --> To Net

	SetVerifySeqEvent(EX3P_PUSH2_MOLR_NetSim_Got_NotifyFacilityLcsMoLrResult);

	SetVerifySeqEvent(EX3P_PUSH2_MOLR_NetSim_Got_NotifyReleaseLcsMoLr);				// --> To Net

	SetVerifyAdhocEvent(EClient_Got_X3P_Complete);

	SetVerifyAdhocEvent(EClient_Got_X3P_Complete);

	}

/** Called at the end of the test to verify the correct position data has been returned to the

	client.

	Each test case SHOULD implement a version of this.

*/

void CT_LbsConflictStep_X3PPushPush::VerifyPosInfos()

	{

	T_LbsUtils utils;

    RPointerArray<TAny>& verifyPosInfoArr = iParent.iSharedData->iVerifyPosInfoArr;

	RPointerArray<TAny>& currPosInfoArr = iParent.iSharedData->iCurrentPosInfoArr;

	TPositionInfo* currPosInfo;

	// Verify entry 0 for the X3P(PUSH). 

	// We expect a real location value, compare using the data

	// sent to the test APGS module.

	TPositionInfo* verifyPosInfo = reinterpret_cast<TPositionInfo*>(verifyPosInfoArr[0]);

	currPosInfo = reinterpret_cast<TPositionInfo*>(currPosInfoArr[0]);

	if (!utils.Compare_PosInfo(*verifyPosInfo, *currPosInfo))

		{

		INFO_PRINTF1(_L("Failed test, X3P position incorrect."));

		SetTestStepResult(EFail);

		}

	// Verify entry 1 for the X3P(PUSH2). 

	// We expect a real location value, compare using the data

	// sent to the test APGS module.

	currPosInfo = reinterpret_cast<TPositionInfo*>(currPosInfoArr[1]);

	if (!utils.Compare_PosInfo(*verifyPosInfo, *currPosInfo))

		{

		INFO_PRINTF1(_L("Failed test, X3P position incorrect."));

		SetTestStepResult(EFail);

		}

	}

/** Helper function to start X3Ps.

*/

void CT_LbsConflictStep_X3PPushPush::StartX3PL(TInt aTransmitId)

	{

	INFO_PRINTF1(_L(">>CT_LbsConflictStep_X3PPushPush::StartX3PL()"));

	// Create a posinfo and store in our shared array for later verification.

	RPointerArray<TAny>& posInfoArr = iParent.iSharedData->iCurrentPosInfoArr;

	TPositionInfo* posInfo = new(ELeave) TPositionInfo();

	posInfoArr.Append(posInfo);

	// Start X3P,

	TLbsTransmitPositionOptions transOpts;	// Set timeout value to 0 (done by the default constructor), to disable the timeout.

	// Push.	

	if (aTransmitId == KLbsConflictX3PPushId)

		{	

		INFO_PRINTF1(_L("Starting X3P(PUSH2)"));

		iDoX3PPush->SetOptions(transOpts);

		iDoX3PPush->StartL(KTransmitPushDestination, KTransmitPushPriority, *posInfo);

		}

	// Push.

	else if (aTransmitId == KLbsConflictX3PPush2Id)

		{

		INFO_PRINTF1(_L("Starting X3P(PUSH)"));

		iDoX3PPush2->SetOptions(transOpts);

		iDoX3PPush2->StartL(KTransmitPush2Destination, KTransmitPush2Priority, *posInfo);

		}

	else

		{

		User::LeaveIfError(KErrNotSupported);

		}

	INFO_PRINTF1(_L("<<CT_LbsConflictStep_X3PPushPush::StartX3PL()"));

	}

/** Run the test.

 */

TVerdict CT_LbsConflictStep_X3PPushPush::doTestStepL()

	{

	INFO_PRINTF1(_L(">>CT_LbsConflictStep_X3PPushPush::doTestStepL()"));

	if (TestStepResult() == EPass)

		{		

		// Setup the expected sequence events for the test.

		SetExpectedSeq();

		// Open and setup net sim.

		OpenNetSim(this);

		// Kick off the test abort and keep alive timers.

		TTimeIntervalMicroSeconds32 abortInterval(KLbsAbortPeriod);

		TTimeIntervalMicroSeconds32 keepAliveInterval(KLbsKeepAlivePeriod);

		iAbortTimer->SetTimer(abortInterval);

		iKeepAliveTimer->SetTimer(keepAliveInterval);

		// Kick off test.

		CActiveScheduler::Start();

		// Verify location data.

		VerifyPosInfos();

		// Clean up.

		CloseNetSim();

		}

	INFO_PRINTF1(_L("<<CT_LbsConflictStep_X3PPushPush::doTestStepL()"));

	return TestStepResult();

	}

/** NetSim callbacks given for a MoLr, which we invoke as a result of the notify position update.

*/

void CT_LbsConflictStep_X3PPushPush::Connected()

	{

	// Call base implementation.

	CT_LbsConflictStep::Connected();

	RPointerArray<TAny>& posInfoArr = iParent.iSharedData->iCurrentPosInfoArr;

	T_LbsUtils utils;

	utils.ResetAndDestroy_PosInfoArr(posInfoArr);	// Clear previous entries before new entry is appended.

	// Kick off first X3P.

	StartX3PL(KLbsConflictX3PPushId);

	iState = EReqX3PPush;

	}

void CT_LbsConflictStep_X3PPushPush::Disconnected()

	{

	// Call base implementation.

	CT_LbsConflictStep::Disconnected();

	}

void CT_LbsConflictStep_X3PPushPush::NotifyRegisterLcsMoLr(const TDesC& aData)

	{

	// Determine and record the sequence event. A blank aData indicates a self locate

	// un-expected MOLR, otherwise we have a X3P MOLR.

	if (aData != KNullDesC)

		{

		// Process X3P Push register.

		if (iState == EReqX3PPush)

			{

			INFO_PRINTF1(_L("Got - X3P(PUSH) MOLR - NetSim Notify Register Lcs MoLr - Event."));

			SetCurrentSeqEvent(EX3P_PUSH_MOLR_NetSim_Got_NotifyRegisterLcsMoLr);

			// Verify telephone number.

			if (aData.Compare(KTransmitPushDestination))

				{

				INFO_PRINTF1(_L("Failed test, bad X3P Push register data."));

				SetTestStepResult(EFail);

				}

			// Start X3P Push2 (second X3P).

			StartX3PL(KLbsConflictX3PPush2Id);

			}

		// Process X3P Push register.			

		else

			{

			INFO_PRINTF1(_L("Got - X3P(PUSH2) MOLR - NetSim Notify Register Lcs MoLr - Event."));

			SetCurrentSeqEvent(EX3P_PUSH2_MOLR_NetSim_Got_NotifyRegisterLcsMoLr);

			// Verify telephone number.

			if (aData.Compare(KTransmitPush2Destination))

				{

				INFO_PRINTF1(_L("Failed test, bad X3P Push register data."));

				SetTestStepResult(EFail);

				}

			}		

		}

	else

		{

		INFO_PRINTF1(_L("Got unexpected - Self MOLR - NetSim Notify Register Lcs MoLr - Event."));

		SetCurrentSeqEvent(ESelf_MOLR_NetSim_Got_NotifyRegisterLcsMoLr);

		}

	}

void CT_LbsConflictStep_X3PPushPush::NotifyReleaseLcsMoLr(TInt aReason)

	{

	TInt expectedErr = KErrNone;

	// Determine and set sequence event.

	if (iState == EReqX3PPush2)

		{

		INFO_PRINTF1(_L("Got - X3P(PUSH2) MOLR - NetSim Notify Release Lcs MoLr - Event."));

		SetCurrentSeqEvent(EX3P_PUSH2_MOLR_NetSim_Got_NotifyReleaseLcsMoLr);

//		expectedErr = KErrPositionHighPriorityReceive;

		iState = EWaiting; // End of test.

		}

	else if(iState == EReqX3PPush)

		{

		INFO_PRINTF1(_L("Got - X3P(PUSH) MOLR - NetSim Notify Release Lcs MoLr - Event."));

		SetCurrentSeqEvent(EX3P_PUSH_MOLR_NetSim_Got_NotifyReleaseLcsMoLr);

		// Indicate we have really started the second X3P.

		iState = EReqX3PPush2;			

		}

	// Verify reason code.

	if (aReason != expectedErr)

		{	

		INFO_PRINTF2(_L("Failed test, bad release reason %d."), aReason);

		SetTestStepResult(EFail);

		}

	}

void CT_LbsConflictStep_X3PPushPush::NotifyMeasurementControlLocation(const TPositionInfo& aPosition, 

															  const RLbsAssistanceDataBuilderSet& aData, 

															  const TLbsNetPosRequestQuality& aQuality)

	{

	T_LbsUtils utils;	

	TInt err;

	// Determine and record sequence event.

	if (iState == EReqX3PPush)

		{

		INFO_PRINTF1(_L("Got - X3P(PUSH) MOLR - NetSim Notify Measurement Control Location - Event."));

		SetCurrentSeqEvent(EX3P_PUSH_MOLR_NetSim_Got_NotifyMeasurementControlLocation);

		}

	else if(iState == EReqX3PPush2)

		{

		INFO_PRINTF1(_L("Got - X3P(PUSH2) MOLR - NetSim Notify Measurement Control Location - Event."));

		SetCurrentSeqEvent(EX3P_PUSH2_MOLR_NetSim_Got_NotifyMeasurementControlLocation);

		}

	// Verify the reference position.

	TPositionInfo verifyRefPosInfo;

	verifyRefPosInfo.SetPosition(iRefPos);

	if (!utils.Compare_PosInfo(verifyRefPosInfo, aPosition))

		{

		INFO_PRINTF1(_L("Failed test, position incorrect."));

		SetTestStepResult(EFail);

		}

    // Verify the assistance data.	

	RLbsAssistanceDataBuilderSet& data = const_cast<RLbsAssistanceDataBuilderSet&>(aData);

	RUEPositioningGpsReferenceTimeBuilder* refTimeBuilder = NULL;

	data.GetDataBuilder(refTimeBuilder);

	// Create a reader from the builder's data to allow us to verify the actual

	// assistance data.

	RUEPositioningGpsReferenceTimeReader refTimeReader;

	TRAP(err, refTimeReader.OpenL());

	if (err == KErrNone)

		{

		refTimeReader.DataBuffer() = refTimeBuilder->DataBuffer();

		if (!utils.VerifySimpleAssistanceData(refTimeReader))

			{

			INFO_PRINTF1(_L("Failed test, assistance data incorrect."));