// Copyright (c) 2006-2009 Nokia Corporation and/or its subsidiary(-ies).+
−
// All rights reserved.+
−
// This component and the accompanying materials are made available+
−
// under the terms of "Eclipse Public License v1.0"+
−
// which accompanies this distribution, and is available+
−
// at the URL "http://www.eclipse.org/legal/epl-v10.html".+
−
//+
−
// Initial Contributors:+
−
// Nokia Corporation - initial contribution.+
−
//+
−
// Contributors:+
−
//+
−
// Description:+
−
//+
−
+
−
LOAD_SUITE LbsClockTestServer -SharedData+
−
+
−
PRINT Run LbsClockTestServer+
−
PRINT+
−
+
−
//Before we start LBS, select the test A-GPS integration module and network reg status txt file to use.+
−
PREFIX RUN_UTILS+
−
	MkDir c:\private\10282253\+
−
	MkDir c:\private\10282253\lbs\+
−
	MkDir c:\private\10282253\lbs\locmods\+
−
	CopyFile c:\testdata\configs\xtestmodule.ini c:\private\10282253\lbs\locmods\agpsintegmodule.ini+
−
    CopyFile c:\testdata\configs\lbstestconfig.txt c:\config.txt+
−
 	// Re-select the profile ini+
−
 	DeleteFile c:\private\10282253\lbs\lbsprofile.ini+
−
REMOVE_PREFIX+
−
+
−
// Selecting the default admin values will ensure the AGPS module requests assistance data.+
−
RUN_TEST_STEP 010 LbsClockTestServer LbsStep_ResetDefaultAdmin+
−
+
−
RUN_TEST_STEP 030 LbsClockTestServer LbsStep_StartLbs+
−
RUN_TEST_STEP 010 LbsClockTestServer LbsStep_SetAutonomousMode+
−
+
−
START_TESTCASE LBS-Clock-0018+
−
+
−
//!@SYMTestCaseID			LBS-Clock-0018+
−
//!@SYMTestCaseDesc			Automatic clock adjust with the Auto Clock API switched on.+
−
//!+
−
//!@SYMTestActions			1. Switch on the Auto Clock API from the admin KSettingClockAdjust setting.+
−
//!							2. Request and process a position update.+
−
//!+
−
//!@SYMTestExpectedResults	Verify the time is set correctly in step 3, the following approach is+
−
//!							taken to verify time is updated correctly:+
−
//!								a. Record current time.+
−
//!								b. Put clock forward by 2 hours.+
−
//!								c. Sync the clock back to the actual time by carrying out a position update which+
−
//!									in turn will re-adjust the clock via the location manager and its integration module.+
−
//!									During the sync keep updating the record of current time, by an fixed interval, to allow later verification in step d.+
−
//!								d. Ensure the time before and after adjust is roughly equal by 5 seconds.+
−
//!								e. Repeat steps a - d and ensure time in d are equal by 2 seconds. +
−
//!+
−
//!@SYMPREQ					PREQ 1616+
−
//!@SYMREQ					REQ 1616.04+
−
//!@SYMREQ					REQ 1616.06+
−
//!@SYMREQ					REQ 1616.07+
−
//!@SYMREQ					REQ 1616.10+
−
//!@SYMREQ					REQ 1616.11+
−
//!+
−
//!@SYMTestType				CIT+
−
//!@SYMTestPriority			1+
−
//!@SYMTestStatus			Implemented.+
−
+
−
RUN_TEST_STEP 010 LbsClockTestServer LbsStep_InstallScheduler+
−
RUN_TEST_STEP 020 LbsClockTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsclock.ini  LBS-Clock+
−
RUN_TEST_STEP 010 LbsClockTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsclock.ini LBS-Clock-0020+
−
RUN_TEST_STEP 020 LbsClockTestServer LbsClockStep_Main c:\testdata\configs\lbsclock.ini LBS-Clock-0020+
−
RUN_TEST_STEP 010 LbsClockTestServer LbsStep_VerifyLogInfo+
−
+
−
END_TESTCASE LBS-Clock-0018+
−
+
−
+
−
START_TESTCASE LBS-Clock-0019+
−
+
−
//!@SYMTestCaseID			LBS-Clock-0019+
−
//!@SYMTestCaseDesc			Automatic clock adjust with the Auto Clock API switched on (adjust clock back).+
−
//!+
−
//!@SYMTestActions			1. Switch on the Auto Clock API from the admin KSettingClockAdjust setting.+
−
//!							2. Request and process a position update.+
−
//!+
−
//!@SYMTestExpectedResults	Verify the time is set correctly in step 3, the following approach is+
−
//!							taken to verify time is updated correctly:+
−
//!								a. Record current time.+
−
//!								b. Put clock back by 2 hours.+
−
//!								c. Sync the clock back to the actual time by carrying out a position update which+
−
//!									in turn will re-adjust the clock via the location manager and its integration module.+
−
//!									During the sync keep updating the record of current time, by an fixed interval, to allow later verification in step d.+
−
//!								d. Ensure the time before and after adjust is roughly equal by 5 seconds.+
−
//!								e. Repeat steps a - d and ensure time in d are equal by 2 seconds. +
−
//!+
−
//!@SYMPREQ					PREQ 1616+
−
//!@SYMREQ					REQ 1616.04+
−
//!@SYMREQ					REQ 1616.06+
−
//!@SYMREQ					REQ 1616.07+
−
//!@SYMREQ					REQ 1616.11+
−
//!+
−
//!@SYMTestType				CIT+
−
//!@SYMTestPriority			1+
−
//!@SYMTestStatus			Implemented.+
−
+
−
RUN_TEST_STEP 010 LbsClockTestServer LbsStep_InstallScheduler+
−
RUN_TEST_STEP 020 LbsClockTestServer LbsStep_SetUpPsy c:\testdata\configs\lbsclock.ini  LBS-Clock+
−
RUN_TEST_STEP 010 LbsClockTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsclock.ini LBS-Clock-0021+
−
RUN_TEST_STEP 020 LbsClockTestServer LbsClockStep_Main c:\testdata\configs\lbsclock.ini LBS-Clock-0021+
−
RUN_TEST_STEP 010 LbsClockTestServer LbsStep_VerifyLogInfo+
−
+
−
END_TESTCASE LBS-Clock-0019+
−
+
−
PRINT Stop LBS+
−
RUN_TEST_STEP 020 LbsClockTestServer LbsStep_StopLbs+
−
+
−
// Re-select the real A-GPS integration module.+
−
RUN_UTILS DeleteFile c:\private\10282253\lbs\locmods\agpsintegmodule.ini+
−
+
−
// Delete network registration status text file+
−
RUN_UTILS DeleteFile c:\config.txt+
−