// Copyright (c) 2006-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
//
PRINT TO DO: need to add correct PREQ/REQ numbers to these test cases:
PRINT *** DELETE LBS LOG ***
RUN_UTILS DeleteFile c:\private\101f401d\Logdbu.dat
LOAD_SUITE LbsMTLRTestServer -SharedData
PRINT Run LbsMTLRTestServer
PRINT
// Before we start LBS, select the test A-GPS integration module and network reg status txt file to use.
PRINT select the test A-GPS integration module to use (copy .ini file to appropriate place)
PREFIX RUN_UTILS
MkDir c:\private\10282253\
MkDir c:\private\10282253\lbs\
MkDir c:\private\10282253\lbs\locmods\
CopyFile c:\testdata\configs\xtestmodule.ini c:\private\10282253\lbs\locmods\agpsintegmodule.ini
CopyFile c:\testdata\configs\lbstestprofile.ini c:\private\10282253\lbs\lbsprofile.ini
CopyFile c:\testdata\configs\lbstestconfig.txt c:\config.txt
DeleteFile c:\private\10202be9\persists\1028224b.cre
REMOVE_PREFIX
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_ResetDefaultAdmin
RUN_TEST_STEP 030 LbsMTLRTestServer LbsStep_SetPrivacyHandler c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr
RUN_TEST_STEP 030 LbsMTLRTestServer LbsStep_StartLbs
START_TESTCASE LBS-MTLR-PrivCntr-0001
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0001
//!@SYMTestCaseDesc 'Notify and Accept' request from network accepted
//! This case also tests the logging API by verifying the relevant logs are written, can be read
//! and as are expected. A self locate log, and external log and an assistance log.
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceNotify) and kick off an privacy request of type 'notify the user and automatically accept'.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).
//! 5. Verify that 'accept' response is sent to the network
//! 6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 8. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request accepted and location sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.04
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ 162.05
//!@SYMREQ 162.06
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.03
//!@SYMREQ REQ 89.04
//!@SYMREQ REQ 89.06
//!@SYMREQ REQ 89.07
//!@SYMREQ REQ 89.09
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_ClearLog
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0001
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0001
END_TESTCASE LBS-MTLR-PrivCntr-0001
START_TESTCASE LBS-MTLR-PrivCntr-0002
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0002
//!@SYMTestCaseDesc 'Verify, Accept if no response' request from network accepted
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).
//! 5. Verify that 'accept' response is sent to the network
//! 6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 8. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request accepted and location sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0002
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0002
START_TESTCASE LBS-MTLR-PrivCntr-0003
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0003
//!@SYMTestCaseDesc 'Verify, Accept if no response' request from network rejected
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), reject the request (use RespondNetworkLocationRequest() ).
//! 5. When privacy controller is called with ProcessRequestComplete(), verify that the reason is KErrNone
//! 6. Verify that 'rejected' response is sent to the network
//!
//!@SYMTestExpectedResults Privacy request rejected
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0003
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0003
//START_TESTCASE LBS-MTLR-PrivCntr-0004
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0004
//!@SYMTestCaseDesc 'Verify, Accept if no response' request from network ignored
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), ignore the request (use RespondNetworkLocationRequest() ).
//! 5. Verify that 'accepted' response is sent to the network
//! 6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 8. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Undefined.
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented, Not Supported
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
//RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
//RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0004
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
//END_TESTCASE LBS-MTLR-PrivCntr-0004
START_TESTCASE LBS-MTLR-PrivCntr-0006
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0006
//!@SYMTestCaseDesc 'Verify, Accept if no response' allowed to timeout
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), do not respond
//! 5. Verify that 'accepted' response is sent to the network
//! 6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 8. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request is accepted and location is sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0006
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0006
START_TESTCASE LBS-MTLR-PrivCntr-0007
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0007
//!@SYMTestCaseDesc Cancel location request before final result
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the
//! request (use RespondNetworkLocationRequest() ).
//! 5. Verify that 'accepted' response is sent to the network
//! 6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 7. When ProcessNetworkPositionUpdate() is called for the first time (reference location), cancel the request
//! 8. When privacy controller is called with ProcessRequestComplete(), verify that the reason is KErrNone
//! 9. Confirm that location is NOT sent to network
//!
//!@SYMTestExpectedResults Location is never passed to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
PRINT This test case can only be run with the test AGPS module, since it requires the module to be configure to stall
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0007
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0007
START_TESTCASE LBS-MTLR-PrivCntr-0008
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0008
//!@SYMTestCaseDesc Negative test on RespondNetworkLocationRequest with incorrect parameter.
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy requestof type 'verify, accept' with a valid Id.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), respond to a
//! request (use RequestNetworkLocationRequest() ) passing an invalid ID.
//! 5. Original privacy request with valid Id is processed 'as normal' (accepted and location request kicked off)
//!
//!@SYMTestExpectedResults
//! Location expected to be sent to network. Response to 'bad' request is ignored
//!
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented. Incomplete.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0008
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0008
START_TESTCASE LBS-MTLR-PrivCntr-0009
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0009
//!@SYMTestCaseDesc Negative test on CancelNetworkLocationRequest with incorrect parameter.
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy requestof type 'verify, accept' with a valid Id.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), cancel a
//! request (use CancelNetworkLocationRequest() ) passing an invalid ID.
//! 5. Original privacy request with valid Id is processed 'as normal' (accepted and location request kicked off)
//!
//!@SYMTestExpectedResults
//! Location expected to be sent to network. Cancelled 'bad' request is ignored
//!
//!
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented. Incomplete.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0009
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0009
START_TESTCASE LBS-MTLR-PrivCntr-0010
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0010
//!@SYMTestCaseDesc Negative test on CancelNetworkLocationRequest called directly after RespondNetworkLocationRequest, with a bad ID.
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy requestof type 'verify, accept' with a valid Id.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept a
//! request (use RequestNetworkLocationRequest() ) passing an invalid ID.
//! 5. Also call CancelNetworkLocationRequest passing an invalid ID.
//! 6. Original privacy request with valid Id is processed 'as normal' (accepted and location request kicked off)
//!
//!@SYMTestExpectedResults
//! Location sent to network as normal. Cancel/Response of 'bad' request ignored
//!
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented. Incomplete.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0010
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0010
START_TESTCASE LBS-MTLR-PrivCntr-0011
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0011
//!@SYMTestCaseDesc Negative test on CancelNetworkLocationRequest called directly after ProcessNetworkLocationRequest
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy requestof type 'verify, accept' with a valid Id.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept a
//! request (use RequestNetworkLocationRequest() ) passing a valid ID.
//! 5. After ProcessNetworkLocationRequest() callback completes, we cancel a request passing a bad ID inside
//! ProcessNetworkPositionUpdate() during its first call for reference data.
//!
//!@SYMTestExpectedResults
//! Location sent to network. Cancel of 'bad' request is ignored
//!
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented. Incomplete.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0011
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0011
START_TESTCASE LBS-MTLR-PrivCntr-0012
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0012
//!@SYMTestCaseDesc Location request received after privacy request rejected
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), reject the request (use RespondNetworkLocationRequest() ).
//! 5. Verify that 'rejected' response is sent to the network
//! 6. Kick off a network location request (via NetSim)
//! 7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() is not called
//! 8. When privacy controller is called with ProcessRequestComplete(), verify that the reason is KErrNone
//! 9. Confirm that control failure is sent to network with reason KErrPermissionDenied
//!
//!@SYMTestExpectedResults Control failure is sent with reason KErrPermissionDenied
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0012
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0012
START_TESTCASE LBS-MTLR-PrivCntr-0013
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0013
//!@SYMTestCaseDesc Silent request
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim and kick off a privacy request of type 'silent'(ERequestAdviceSilent).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).
//! 5. Verify that 'accept' response is sent to the network
//! 6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 8. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request is accepted and location is sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0013
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0013
START_TESTCASE LBS-MTLR-PrivCntr-0014
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0014
//!@SYMTestCaseDesc Request when external locate turned off in admin
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOff) to disallow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim and kick off a privacy request.
//! 4. Verify that the privacy controller callbacks are not called
//! 5. Confirm that location is not sent to network
//!
//!@SYMTestExpectedResults Privacy controller is never called and location not sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0014
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0014
START_TESTCASE LBS-MTLR-PrivCntr-0015
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0015
//!@SYMTestCaseDesc 'Verify, Reject if no response' allowed to timeout
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy request of type 'verify, accept'.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), do not respond
//! 5. When privacy controller is called with ProcessRequestComplete(), verify that the reason is KErrNone
//! 6. Verify that 'rejected' response is sent to the network
//!
//!@SYMTestExpectedResults Privacy request is rejected and location is NOT sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0015
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0015
START_TESTCASE LBS-MTLR-PrivCntr-0016
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0016
//!@SYMTestCaseDesc Request when external locate turned to 'off but notify' in admin
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOffButNotify) so external locate set to 'offbutnotify' and wait for this to propogate (verify).
//! 3. Configure netSim and kick off a privacy request of type 'notify/reject' (ERequestAdviceNotify).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), check that the notification type has been changed to ENotifyLocationRejected.
//! 4a. Make sure that Session Complete is sent to the Privacy Controller.
//! 5. Don't accept the request (the NRH should reply for you).
//! 6. Verify that 'reject' response is sent to the network
//! 7. There should be no other privacy controller callbacks.
//!
//!@SYMTestExpectedResults Privacy controller is called but the NRH rejects the request; no location is sent to the network.
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0016
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0016
START_TESTCASE LBS-MTLR-PrivCntr-0017
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0017
//!@SYMTestCaseDesc Request when external locate turned to 'on but always verify' in admin
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOnButAlwaysVerify) and wait for this to propogate (verify).
//! 3. Configure netSim and kick off a privacy request of type 'verify' (ERequestAdviceVerify).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), check that the notification type has not been changed
//! 5. Accept the request (use RespondNetworkLocationRequest() ).
//! 6. Verify that 'accept' response is sent to the network
//! 7. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 8. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 9. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy controller is called as usual and location sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0017
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0017
START_TESTCASE LBS-MTLR-PrivCntr-0018
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0018
//!@SYMTestCaseDesc Cancel Network location request in the RespondNetworkLocationRequest()
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceNotify) and kick off an privacy request of type 'notify the user and automatically accept'.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), cancel the request (use CancelNetworkLocationRequest() ).
//! 5. Verify network receive 'reject' response from LBS in NotifyReleaseLcsLocationNotification() and do not start Network
//! 6. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() are not called and ProcessRequestComplete() called with KErrNone
//!
//!@SYMTestExpectedResults Privacy controller is canceled
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0018
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0018
START_TESTCASE LBS-MTLR-PrivCntr-0019
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0019
//!@SYMTestCaseDesc CancelNetworkLocationRequest with bad session id.
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceVerify) and kick off an privacy requestof type 'verify, accept' with a valid Id.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), cancel a
//! request (use CancelNetworkLocationRequest() ) passing an invalid ID.
//! 5. Original privacy request with valid Id is ignored
//! 6. Expect original request to timeout and be automatically accepted. Cancelled (bad) request should be ignored.
//!
//!@SYMTestExpectedResults
//! Location sent to network. Cancel of 'bad' id ignored
//!
//!
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0019
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0019
START_TESTCASE LBS-MTLR-PrivCntr-0020
//!@SYMTestCaseID LBS-MTLR-PrivCntr-0020
//!@SYMTestCaseDesc Cancel Network location request after after accepting. This relates to defect INC102106[QAT98]
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceNotify) and kick off an privacy request of type 'notify the user and automatically accept'.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request.
//! 5. When receiving NotifyReleaseLcsLocationNotification, cancel the request (use CancelNetworkLocationRequest() )
//!
//!@SYMTestExpectedResults Privacy controller is canceled
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-0020
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-0020
START_TESTCASE LBS-MTLR-PrivCntr-SilentReject-0001
//!@SYMTestCaseID LBS-MTLR-PrivCntr-SilentReject-0001
//!@SYMTestCaseDesc Silent/Reject request behaviourmode = 'custom1'
//! Note: this behaviour seems odd (accepting a 'silent reject'), but is apparently what 'customer1' wanted!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim and kick off a privacy request of type 'silent/reject'(ERequestAdviceSilent/ERequestActionReject).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).
//! 5. Verify that 'accept' response is sent to the network
//! 6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 8. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request is accepted and location is sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-SilentReject-0001
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-SilentReject-0001
START_TESTCASE LBS-MTLR-PrivCntr-Emergency-0001
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Emergency-0001
//!@SYMTestCaseDesc Emergency request of type 'accept and notify' is accepted by privacy controller
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow Emergency MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use SetEmergenyStatus) and kick off an emergency privacy request of type 'notify the user and automatically accept'(ERequestAdviceNotify).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).
//! 5. Verify that 'accept' response is sent to the network
//! 6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 8. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request is accepted and location is sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Emergency-0001
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-Emergency-0001
START_TESTCASE LBS-MTLR-PrivCntr-Emergency-0002
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Emergency-0002
//!@SYMTestCaseDesc Emergency request of type 'accept and notify' is rejected by privacy controller
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow Emergency MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use SetEmergenyStatus) and kick off an emergency privacy requestof type 'accept and notify'(ERequestAdviceNotify).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), reject the request (use RespondNetworkLocationRequest() ).
//! 5. Verify that 'accept' response is sent to the network (despite the priv controller rejecting it)
//! 6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 8. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request is accepted and location is sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Emergency-0002
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-Emergency-0002
START_TESTCASE LBS-MTLR-PrivCntr-Emergency-0003
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Emergency-0003
//!@SYMTestCaseDesc Emergency request of type 'verify, reject' is rejected by privacy controller
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow Emergency MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use SetEmergenyStatus) and kick off an emergency privacy requestof type 'verify/reject' (ERequestAdviceVerify + ERequestActionReject).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), verify that the notification type has been changed to 'accept/notify'
//! 5. Reject the request (use RespondNetworkLocationRequest() ).
//! 6. Verify that 'accept' response is sent to the network (despite the priv controller rejecting it)
//! 7. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 8. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 9. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request is accepted and location is sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Emergency-0003
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-Emergency-0003
START_TESTCASE LBS-MTLR-PrivCntr-Emergency-0004
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Emergency-0004
//!@SYMTestCaseDesc Privacy controller attempts to cancel Emergency request
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow Emergency MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use SetEmergenyStatus) and kick off an emergency privacy request of type 'notify/accept' (ERequestAdviceNotify + ERequestActionAllow).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), verify the notification type
//! 5. Cancel the request (use CancelNetworkLocationRequest())
//! 6. Verify that 'accept' response is sent to the network (despite the priv controller cancelling it)
//! 7. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 8. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 9. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request is accepted and location is sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Emergency-0004
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-Emergency-0004
START_TESTCASE LBS-MTLR-PrivCntr-Emergency-0005
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Emergency-0005
//!@SYMTestCaseDesc Emergency request of type 'verify, allow' is ignored by privacy controller
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow Emergency MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use SetEmergenyStatus) and kick off an emergency privacy request of type 'verify/allow'(ERequestAdviceVerify + ERequestActionAllow).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), verify that the notification type has been changed to 'accept/notify'
//! 5. Do not respond to the privacy request.
//! 6. Verify that 'accept' response is sent to the network (despite the priv controller rejecting it)
//! 7. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 8. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 9. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request is accepted and location is sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Emergency-0005
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-Emergency-0005
START_TESTCASE LBS-MTLR-PrivCntr-Emergency-0006
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Emergency-0006
//!@SYMTestCaseDesc Emergency request of type 'silent' accepted by privacy controller
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow Emergency MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use SetEmergenyStatus) and kick off an emergency privacy request of type 'silent'(ERequestAdviceSilent).
//! 4. When ProcessNetworkLocationRequest() called, accept it and kick off a network location request (via NetSim).
//! 5. Verify that 'accept' response is sent to the network.
//! 6. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 7. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request is accepted and location is sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Emergency-0006
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-Emergency-0006
// This test case is commented out because the privacy controller
// no longer reads the admin setting for emergency privacy requests.
// Instead it just accepts or rejects based on the RequestAction() sent
// in from the network.
//START_TESTCASE LBS-MTLR-PrivCntr-Emergency-0007
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Emergency-0007
//!@SYMTestCaseDesc Emergency request when emergency locate turned off in admin
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOff) to disallow Emergency MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use SetEmergenyStatus) and kick off an emergency privacy request.
//! 4. Verify that the privacy controller callbacks are not called
//! 5. Confirm that location is not sent to network
//!
//!@SYMTestExpectedResults Privacy controller is never called and location not sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Incomplete.
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
//RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
//RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Emergency-0007
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
//END_TESTCASE LBS-MTLR-PrivCntr-Emergency-0007
START_TESTCASE LBS-MTLR-PrivCntr-Emergency-0008
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Emergency-0008
//!@SYMTestCaseDesc Emergency request of type 'verify, reject' is rejected by privacy controller while emergencylocate set to 'OnButAlwaysVerify'
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOnButVerify) to allow Emergency MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use SetEmergenyStatus) and kick off an emergency privacy requestof type 'verify/reject' (ERequestAdviceVerify + ERequestActionReject).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), verify that the notification type has been changed to 'accept/notify'
//! 5. Reject the request (use RespondNetworkLocationRequest() ).
//! 6. Verify that 'accept' response is sent to the network (despite the priv controller rejecting it)
//! 7. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 8. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 9. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults 'OnButVerify' setting has no effect when using privacy controller. Privacy request is accepted and location is sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Emergency-0008
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-PrivCntr-Emergency-0008
// NOTE: Commented out because 'roaming' not currently supported in LBS
// This is LBS-MTLR-PrivCntr-0001, but while Roaming
//START_TESTCASE LBS-MTLR-PrivCntr-Roaming-0001
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Roaming-0001
//!@SYMTestCaseDesc While roaming. 'Notify and Accept' request from network accepted. ExternalLocateOn for roaming.
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (set 'Roaming' + use ERequestAdviceNotify) and kick off an privacy request of type 'notify the user and automatically accept'.
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).
//! 5. Verify that 'accept' response is sent to the network
//! 6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 8. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request accepted and location sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.04
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ 162.05
//!@SYMREQ 162.06
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
//RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
//RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Roaming-0001
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
//END_TESTCASE LBS-MTLR-PrivCntr-Roaming-0001
// NOTE: Commented out because 'roaming' not currently supported in LBS
// This is LBS-MTLR-PrivCntr-0014, but while Roaming
//START_TESTCASE LBS-MTLR-PrivCntr-Roaming-0002
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Roaming-0002
//!@SYMTestCaseDesc While roaming. Request when ExternalLocateOff for roaming.
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOff) to disallow MT-LRs on Roaming network and wait for this to propogate (verify).
//! 3. Configure netSim (Roaming etc) and kick off a privacy request.
//! 4. Verify that the privacy controller callbacks are not called
//! 5. Confirm that location is not sent to network
//!
//!@SYMTestExpectedResults Privacy controller is never called and location not sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
//RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
//RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Roaming-0002
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
//END_TESTCASE LBS-MTLR-PrivCntr-Roaming-0002
// NOTE: Commented out because 'roaming' not currently supported in LBS
//This is LBS-MTLR-PrivCntr-Emergency-0001 but while roaming:
//START_TESTCASE LBS-MTLR-PrivCntr-Emergency-Roaming-0001
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Emergency-Roaming-0001
//!@SYMTestCaseDesc While roaming, Emergency request of type 'accept and notify' is accepted by privacy controller.
//! EEmergencyLocateOn for Roaming.
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EEmergencyLocateOn, EExternalLocateOff for roaming, both Off for home) to allow Emergency MT-LRs on Roaming Network and wait for this to propogate (verify).
//! 3. Configure netSim (use SetEmergenyStatus) and kick off an emergency privacy request of type 'notify the user and automatically accept'(ERequestAdviceNotify).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).
//! 5. Verify that 'accept' response is sent to the network
//! 6. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 7. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 8. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request is accepted and location is sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
//RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
//RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Emergency-Roaming-0001
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
//END_TESTCASE LBS-MTLR-PrivCntr-Emergency-Roaming-0001
// NOTE: Commented out because 'roaming' not currently supported in LBS
//This is LBS-MTLR-PrivCntr-Emergency-0007 but while roaming:
//START_TESTCASE LBS-MTLR-PrivCntr-Emergency-Roaming-0002
//!@SYMTestCaseID LBS-MTLR-PrivCntr-Emergency-Roaming-0002
//!@SYMTestCaseDesc While roaming; Emergency request when EmergencyLocateOff for roaming networks
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOff for Roaming) to disallow Emergency MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim (use SetEmergenyStatus) and kick off an emergency privacy request.
//! 4. Verify that the privacy controller callbacks are not called
//! 5. Confirm that location is not sent to network
//!
//!@SYMTestExpectedResults Privacy controller is never called and location not sent to network
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Incomplete.
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
//RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
//RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Emergency-Roaming-0002
//RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
//END_TESTCASE LBS-MTLR-PrivCntr-Emergency-Roaming-0002
START_TESTCASE LBS-MTLR-Quality-Profile-0001
//!@SYMTestCaseID LBS-MTLR-Quality-Profile-0001
//!@SYMTestCaseDesc Request a location update from Network by setting required quality profile Id in admin
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use KSettingQualityProfileExternalLocate) to allow MT-LR uses quality profile and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceNotify) and set MAXTime to zero by calling SetQuality function
//! *Note: Ensure ntework uses qualityprofile while requesting a location.
//! 4. kick off an privacy request of type 'notify the user and automatically accept'.
//! 5. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).
//! 6. Verify that 'accept' response is sent to the network
//! 7. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 8. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 9. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request accepted and location sent to network with the specified accuracy
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.04
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ 162.05
//!@SYMREQ 162.06
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Quality-Profile-0001
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Quality-Profile-0001
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-Quality-Profile-0001
START_TESTCASE LBS-MTLR-Timeout-0001
//!@SYMTestCaseID LBS-MTLR-Timeout-0001
//!@SYMTestCaseDesc Request a location update from Network by setting required quality profile Id in admin
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use KSettingQualityProfileExternalLocate) to allow MT-LR uses quality profile and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceNotify and do not provide valid quality params in request)
//! *Note: Above ensures ntework uses qualityprofile while requesting a location.
//! 4. kick off an privacy request of type 'notify the user and automatically accept'.
//! 5. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request (use RespondNetworkLocationRequest() ).
//! 6. Verify that 'accept' response is sent to the network
//! 7. When response to privacy request has been sent to network, kick off a network location request (via NetSim)
//! 8. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called
//! 9. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request accepted and location sent to network with the specified accuracy
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.04
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ 162.05
//!@SYMREQ 162.06
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Timeout-0001
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Timeout-0001
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-Timeout-0001
START_TESTCASE LBS-MTLR-PrivCntr-AlwaysVerify-Timeout-0001
//!@SYMTestCaseID LBS-MTLR-PrivCntr-AlwaysVerify-Timeout-0001
//!@SYMTestCaseDesc Privacy request of type 'notify/reject timesout. External locate turned to 'on but always verify' in admin. Behaviourmode = 'custom1'
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOnButAlwaysVerify) and wait for this to propogate (verify).
//! 3. Configure netSim and kick off a privacy request of type 'notify/reject' (ERequestAdviceNotify/ERequestActionReject).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), check the notification type
//! 5. Do not respond to request (so it timesout)
//! 6. Verify that 'reject' response is sent to the network
//!
//!@SYMTestExpectedResults Privacy request is rejected
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-AlwaysVerify-Timeout-0001
END_TESTCASE LBS-MTLR-PrivCntr-AlwaysVerify-Timeout-0001
START_TESTCASE LBS-MTLR-PrivCntr-AlwaysVerify-Timeout-0002
//!@SYMTestCaseID LBS-MTLR-PrivCntr-AlwaysVerify-Timeout-0002
//!@SYMTestCaseDesc Privacy request of type 'notify/allow' timesout. External locate turned to 'on but always verify' in admin. Behaviourmode = 'custom1'
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOnButAlwaysVerify) and wait for this to propogate (verify).
//! 3. Configure netSim and kick off a privacy request of type 'notify/allow' ERequestAdviceNotify + ERequestActionAllow).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), check the notification type
//! 5. Do not respond to request (so it timesout)
//! 6. Verify that 'accept' response is sent to the network
//!
//!@SYMTestExpectedResults Privacy request is accepted
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-AlwaysVerify-Timeout-0002
END_TESTCASE LBS-MTLR-PrivCntr-AlwaysVerify-Timeout-0002
// We need to re-start LBS with a profile ini containing a valid profile for 'profile not in use' id and 'profile not in use' id in admin cenrep
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_StopLbs
PREFIX RUN_UTILS
CopyFile c:\testdata\configs\lbstestprofile_valid_profilenotinuse.ini c:\private\10282253\lbs\lbsprofile.ini
CopyFile c:\private\10202be9\1028224b.cre c:\private\10202be9\1028224B.cre.save
DeleteFile c:\private\10202be9\1028224b.cre
DeleteFile c:\private\10202be9\persists\1028224b.cre
CopyFile c:\testdata\1028224b_custom1behaviour_noextprofileinuse.cre c:\private\10202be9\persists\1028224b.cre
CopyFile c:\testdata\1028224b_custom1behaviour_noextprofileinuse.cre c:\private\10202be9\1028224B.cre
REMOVE_PREFIX
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_ResetDefaultAdmin
RUN_TEST_STEP 030 LbsMTLRTestServer LbsStep_SetPrivacyHandler c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr
RUN_TEST_STEP 030 LbsMTLRTestServer LbsStep_StartLbs
START_TESTCASE LBS-MTLR-Quality-Profile-0005
//!@SYMTestCaseID LBS-MTLR-Quality-Profile-0005
//!@SYMTestCaseDesc 'custom1' behaviour mode. Privacy + Location Request from Network with quality profile = "quality profile not in use" Id in admin
//! profile details for "quality profile not in use" id exists in profile .ini file
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use KSettingQualityProfileExternalLocate) to indicate that MT-LR should not use a quality profile and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceNotify and invalid quality params)
//! 4. kick off an privacy request of type 'notify the user and automatically accept'.
//! 5. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request
//! 6. Verify that 'accept' response is sent to the network
//! 7. When response to privacy request has been sent to network, kick off a network location request
//! 8. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called with KErrNone
//! 9. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request accepted and location sent to network
//!
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.04
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ 162.05
//!@SYMREQ 162.06
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Quality-Profile-0005
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Quality-Profile-0005
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-Quality-Profile-0005
// Tidy up after LBS-MTLR-Quality-Profile-0005:
PRINT Stop LBS
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_StopLbs
PREFIX RUN_UTILS
DeleteFile c:\private\10202be9\1028224b.cre
DeleteFile c:\private\10202be9\persists\1028224b.cre
CopyFile c:\private\10202be9\1028224B.cre.save c:\private\10202be9\1028224B.cre
CopyFile c:\private\10202be9\1028224B.cre.save c:\private\10202be9\persists\1028224B.cre
DeleteFile c:\private\10202be9\1028224B.cre.save
REMOVE_PREFIX
// Move the admin cenrep file out of the way and replace with a test version (original behaviour + profilenotinuse). Also use profile.ini with no entry for 'profilenotinuse' id
PREFIX RUN_UTILS
CopyFile c:\testdata\configs\lbstestprofile.ini c:\private\10282253\lbs\lbsprofile.ini
CopyFile c:\private\10202be9\1028224b.cre c:\private\10202be9\1028224B.cre.save
DeleteFile c:\private\10202be9\1028224b.cre
DeleteFile c:\private\10202be9\persists\1028224b.cre
CopyFile c:\testdata\1028224b_originalbehaviour_noextprofileinuse.cre c:\private\10202be9\1028224B.cre
CopyFile c:\testdata\1028224b_originalbehaviour_noextprofileinuse.cre c:\private\10202be9\persists\1028224B.cre
REMOVE_PREFIX
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_ResetDefaultAdmin
RUN_TEST_STEP 030 LbsMTLRTestServer LbsStep_SetPrivacyHandler c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr
RUN_TEST_STEP 030 LbsMTLRTestServer LbsStep_StartLbs
START_TESTCASE LBS-MTLR-Quality-Profile-0006
//!@SYMTestCaseID LBS-MTLR-Quality-Profile-0006
//!@SYMTestCaseDesc 'Vanilla' behaviour mode. Privacy + Location Request from Network with quality profile = "quality profile not in use" Id in admin
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use KSettingQualityProfileExternalLocate) to indicate that MT-LR should not use a quality profile and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceNotify and valid quality params)
//! 4. kick off an privacy request of type 'notify the user and automatically accept'.
//! 5. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request
//! 6. Verify that 'accept' response is sent to the network
//! 7. When response to privacy request has been sent to network, kick off a network location request
//! 8. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called with KErrNone
//! 9. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request accepted and location sent to network
//!
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.04
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ 162.05
//!@SYMREQ 162.06
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Quality-Profile-0006
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Quality-Profile-0006
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-Quality-Profile-0006
START_TESTCASE LBS-MTLR-Quality-Profile-0007
//!@SYMTestCaseID LBS-MTLR-Quality-Profile-0007
//!@SYMTestCaseDesc 'Vanilla' behaviour mode. Privacy + Location Request from Network with quality profile = "quality profile not in use" Id in admin
//! Not all quality params supplied by network
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use KSettingQualityProfileExternalLocate) to indicate that MT-LR should not use a quality profile and wait for this to propogate (verify).
//! 3. Configure netSim (use ERequestAdviceNotify and valid quality params)
//! 4. kick off an privacy request of type 'notify the user and automatically accept'.
//! 5. When privacy controller is called (with ProcessNetworkLocationRequest()), accept the request
//! 6. Verify that 'accept' response is sent to the network
//! 7. When response to privacy request has been sent to network, kick off a network location request, with invalid quality params
//! 8. Confirm that privacy controller callbacks ProcessNetworkPositionUpdate() and ProcessRequestComplete() are called with appropriate error
//! 9. Confirm that location is sent to network
//!
//!@SYMTestExpectedResults Privacy request accepted, location request rejected
//!
//!@SYMPREQ PREQ 436
//!@SYMREQ REQ 436.04
//!@SYMREQ REQ 436.05
//!@SYMREQ REQ 436.06
//!@SYMREQ REQ 436.13
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ 162.05
//!@SYMREQ 162.06
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Quality-Profile-0007
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Quality-Profile-0007
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_VerifyLogInfo
END_TESTCASE LBS-MTLR-Quality-Profile-0007
START_TESTCASE LBS-MTLR-PrivCntr-SilentReject-0002
//!@SYMTestCaseID LBS-MTLR-PrivCntr-SilentReject-0002
//!@SYMTestCaseDesc Silent request, behaviourmode = 'vanilla'
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOn) to allow MT-LRs and wait for this to propogate (verify).
//! 3. Configure netSim and kick off a privacy request of type 'silent'(ERequestAdviceSilent) and Reject (ERequestActionReject)
//! 4. Verify that 'reject' response is sent to the network
//!
//!
//!@SYMTestExpectedResults Privacy request is rejected
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 1
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-SilentReject-0002
END_TESTCASE LBS-MTLR-PrivCntr-SilentReject-0002
START_TESTCASE LBS-MTLR-PrivCntr-AlwaysVerify-Timeout-0003
//!@SYMTestCaseID LBS-MTLR-PrivCntr-AlwaysVerify-Timeout-0003
//!@SYMTestCaseDesc Privacy request (ERequestAdviceNotify + ERequestActionAllow) timesout. External locate turned to 'on but always verify' in admin. Behaviourmode = 'vanilla'
//!
//!@SYMTestActions
//! 1. Register as the privacy observer app.
//! 2. Change admin settings (use EExternalLocateOnButAlwaysVerify) and wait for this to propogate (verify).
//! 3. Configure netSim and kick off a privacy request of type 'verify' (ERequestAdviceVerify).
//! 4. When privacy controller is called (with ProcessNetworkLocationRequest()), check that the notification type has not been changed
//! 5. Do not respond to request (so it timesout)
//! 6. Verify that 'reject' response is sent to the network
//!
//!@SYMTestExpectedResults Privacy request is rejected
//!@SYMPREQ PREQ 436
//!@SYMREQ
//!
//!@SYMPREQ PREQ 162
//!@SYMREQ
//!
//!@SYMPREQ PREQ 89
//!@SYMREQ REQ 89.04
//!
//!@SYMTestType CIT
//!@SYMTestPriority 2
//!@SYMTestStatus Implemented.
RUN_TEST_STEP 010 LbsMTLRTestServer LbsStep_InstallScheduler
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_CreateVerifyPosInfos c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-Position
RUN_TEST_STEP 120 LbsMTLRTestServer LbsMTLRPrivCntrlStep_Main c:\testdata\configs\lbsmtlr.ini LBS-MTLR-Priv-Cntr-AlwaysVerify-Timeout-0003
END_TESTCASE LBS-MTLR-PrivCntr-AlwaysVerify-Timeout-0003
RUN_TEST_STEP 020 LbsMTLRTestServer LbsStep_StopLbs
PREFIX RUN_UTILS
DeleteFile c:\private\10202be9\1028224b.cre
DeleteFile c:\private\10202be9\persists\1028224b.cre
CopyFile c:\private\10202be9\1028224B.cre.save c:\private\10202be9\1028224B.cre
CopyFile c:\private\10202be9\1028224B.cre.save c:\private\10202be9\persists\1028224B.cre
DeleteFile c:\private\10202be9\1028224B.cre.save
REMOVE_PREFIX
// Re-select the lbsprofile.ini .
RUN_UTILS DeleteFile c:\private\10282253\lbs\lbsprofile.ini
// Re-select the real A-GPS integration module.
PRINT Re-select the real A-GPS integration module.
RUN_UTILS DeleteFile c:\private\10282253\lbs\locmods\agpsintegmodule.ini
// Delete network registration status text file
RUN_UTILS DeleteFile c:\config.txt