// Copyright (c) 2008-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

#include <e32math.h>

#include <hal.h>

#include <e32test.h>

#include <ecom/ecom.h>

#include <ecom/ecomresolverparams.h>

#include "Interface.h" // for TExampleInterfaceInitParams

#include "EComPatchDataConstantv2.h"

#include "../EcomTestUtils/EcomTestUtils.h"

LOCAL_D RTest test(_L("Custom Resolver Load Time Performance Test"));

_LIT8(KDummyData,"dummy");

// KCExampleInterfaceUid is defined in "Interface.inl" !

// custom resolvers available for testing.

// 200126cd, A0001346 and A0001347 are allocated outside the

// ECOM Uid Allocations.doc

const TUid KDummyResolverUid2  = {0xA0001346};

const TUid KDummyResolverUid3  = {0xA0001347};

const TUid KExampleResolverUid = {0x10009DD0};

const TUid KMyResolverUid      = {0x10009E12};

const TUid KDummyResolverUid1  = {0x200126CD};

const TInt KArraySize = 5;

TUid MyResolvers[KArraySize] = {

	KDummyResolverUid2,

	KDummyResolverUid1,

	KExampleResolverUid,

	KMyResolverUid,

	KDummyResolverUid3

	};

// The custom resolver in RAMOnly dir

_LIT(KDummyRscInC, "c:\\resource\\plugins\\dummycustomresolver1.rsc");

_LIT(KDummyDllInC, "c:\\sys\\bin\\dummycustomresolver1.dll");

_LIT(KDummyRscInZ, "z:\\ramonly\\dummycustomresolver1.rsc");

_LIT(KDummyDllInZ, "z:\\ramonly\\dummycustomresolver1.dll");

// Copies the Plugins to specific folder for testing purpose

LOCAL_C void CopyPluginsL()

	{

	EComTestUtils::FileManCopyFileL(KDummyRscInZ, KDummyRscInC);

	EComTestUtils::FileManCopyFileL(KDummyDllInZ, KDummyDllInC);

	}

// Deleting plugin from the RAM for cleanup purpose

LOCAL_C void DeleteTestPlugin()

	{

	TRAP_IGNORE(EComTestUtils::FileManDeleteFileL(KDummyRscInC));

	TRAP_IGNORE(EComTestUtils::FileManDeleteFileL(KDummyDllInC));

	}

// converts fast counter ticks to milliseconds

LOCAL_D TReal FastCountToMilliseconds(TUint32 aFastCount)

	{

	TInt freqInHz;

	HAL::Get(HAL::EFastCounterFrequency, freqInHz);

	TReal freqInkHz = (TReal)freqInHz / 1000;

	return (TReal)aFastCount / freqInkHz;

	}

// counter wrap around subtraction

LOCAL_D TUint32 ElaspedCounterTicks(TUint32 aStart, TUint32 aEnd)

	{

	if (aEnd >= aStart)

		{

		return (aEnd - aStart);

		}

	else

		{

		return (KMaxTUint32 - aStart + aEnd + 1);

		}

	}

// sleep for 2 minutes and 15 seconds

LOCAL_D void WaitForLazyUnloadPassL(void)

	{

	// Performance results from winscw do not count.

	// Hence sleep only in armv5.

#ifdef __ARMCC__

	const TInt32 KLazyDllUnloadPeriod = 135; // actual is 2 minutes.

	test.Printf(_L("sleep %d s to avoid lazy DLL unload\n"), KLazyDllUnloadPeriod);

	User::After( KLazyDllUnloadPeriod * 1000000 );

	test.Printf(_L("wake up after sleeping %d s\n"), KLazyDllUnloadPeriod);

#endif

	// Wait one second for plugin discovery

#ifdef __X86GCC__

	test.Printf(_L("sleep 1 s \n"));

	User::After(1000000);

	test.Printf(_L("wake up!\n"));

#endif

	}

/** Check create test is within allowed limit.

@return True means test pass. False means fail.

*/

LOCAL_D TBool CheckCreatePerf(TReal aMilliseconds)

	{

	// These thresholds have 33% margin, i.e. when the limit is 320 ms,

	// the expected result is about 240 ms.

	const TReal KH2DpNandThreshold = 420.0;

	const TReal KH2NandThreshold = 420.0;

	const TReal KH2RamThreshold = 400.0;

	const TReal KH4DpNandThreshold = 200.0;

	const TReal KH4NandThreshold = 200.0;

	const TReal KH4RamThreshold = 180.0;

	const TReal KH4MMCThreshold = 225.0; 

	//INFO: 'KH4MMCThreshold' is the threshold in case of WDP enabled configuration on H4.

    //       This was arrived at by running the test on a ROM built without the USE_DATA_PAGING defined.

	//       The time taken by this operation in the above configuration was used to set this threshold

	const TReal KH6DpNandThreshold = 150.0;

	const TReal KH6NandThreshold = 150.0;

	const TReal KH6RamThreshold = 140.0;

	TReal threshold = 0.0;

	switch (EComTestUtils::GetHardwareConfiguration())

		{

		case EPlatformH2RAM:

			threshold = KH2RamThreshold;

			break;

		case EPlatformH2NAND:

			threshold = KH2NandThreshold;

			break;

		case EPlatformH2NANDDP:

			threshold = KH2DpNandThreshold;

			break;

		case EPlatformH4RAM:

			threshold = KH4RamThreshold;

			break;

		case EPlatformH4MMC:

			threshold = KH4MMCThreshold;

			break;

		case EPlatformH4NAND:

			threshold = KH4NandThreshold;

			break;

		case EPlatformH4NANDDP:

			threshold = KH4DpNandThreshold;

			break;

		case EPlatformH6RAM:

			threshold = KH6RamThreshold;

			break;

		case EPlatformH6NAND:

			threshold = KH6NandThreshold;

			break;

		case EPlatformH6NANDDP:

			threshold = KH6DpNandThreshold;

			break;

		default:

			// Ignore results on winscw and whatever unknown platform.

			test.Printf(_L("custom resolver create perf test: %f ms\n"), aMilliseconds);

			return ETrue;

		}

		test.Printf(_L("custom resolver create perf test: %f ms (limit %f)\n"), aMilliseconds, threshold);

#ifdef _DEBUG

		// the thresholds are for urel only

		return ETrue;

#else

		return (threshold > aMilliseconds);

#endif

	}

/** Check list test is within allowed limit.

@return True means test pass. False means fail.

*/

LOCAL_D TBool CheckListPerf(TReal aMilliseconds)

	{

	// These thresholds have 33% margin, i.e. when the limit is 300 ms,

	// the expected result is about 200 ms.

	const TReal KH2DpNandThreshold = 360.0;

	const TReal KH2NandThreshold = 360.0;

	const TReal KH2RamThreshold = 320.0;

	const TReal KH4DpNandThreshold = 150.0;

	const TReal KH4NandThreshold = 150.0;

	const TReal KH4RamThreshold = 140.0;

	const TReal KH4MMCThreshold = 140.0;

	//INFO: 'KH4MMCThreshold' is the threshold in case of WDP enabled configuration on H4.

    //       This was arrived at by running the test on a ROM built without the USE_DATA_PAGING defined.

	//       The time taken by this operation in the above configuration was used to set this threshold

	const TReal KH6DpNandThreshold = 150.0;

	const TReal KH6NandThreshold = 150.0;

	const TReal KH6RamThreshold = 140.0;

	TReal threshold = 0.0;

	switch (EComTestUtils::GetHardwareConfiguration())

		{

		case EPlatformH2RAM:

			threshold = KH2RamThreshold;

			break;

		case EPlatformH2NAND:

			threshold = KH2NandThreshold;

			break;

		case EPlatformH2NANDDP:

			threshold = KH2DpNandThreshold;

			break;

		case EPlatformH4RAM:

			threshold = KH4RamThreshold;

			break;

		case EPlatformH4MMC:

			threshold = KH4MMCThreshold;

			break;

		case EPlatformH4NAND:

			threshold = KH4NandThreshold;

			break;

		case EPlatformH4NANDDP:

			threshold = KH4DpNandThreshold;

			break;

		case EPlatformH6RAM:

			threshold = KH6RamThreshold;

			break;

		case EPlatformH6NAND:

			threshold = KH6NandThreshold;

			break;

		case EPlatformH6NANDDP:

			threshold = KH6DpNandThreshold;

			break;

		default:

			// Ignore results on winscw and whatever unknown platform.

			test.Printf(_L("custom resolver list perf test: %f ms\n"), aMilliseconds);

			return ETrue;

		}

		test.Printf(_L("custom resolver list perf test: %f ms (limit %f)\n"), aMilliseconds, threshold);

#ifdef _DEBUG

		// the thresholds are for urel only

		return ETrue;

#else

		return (threshold > aMilliseconds);

#endif

	}

/** Check create test in cache miss is within allowed limit.

@return True means test pass. False means fail.

*/

LOCAL_D TBool CheckCacheMissCreatePerf(TReal aMilliseconds)

	{

	// These thresholds have 33% margin, i.e. when the limit is 1200 ms,

	// the expected result is about 900 ms.

	const TReal KH2DpNandThreshold = 2250.0;

	const TReal KH2NandThreshold = 2250.0;

	const TReal KH2RamThreshold = 1000.0;

	const TReal KH4DpNandThreshold = 1350.0;

	const TReal KH4NandThreshold = 1350.0;

	const TReal KH4RamThreshold = 500.0;

	const TReal KH4MMCThreshold = 1350.0;

	//INFO: 'KH4MMCThreshold' is the threshold in case of WDP enabled configuration on H4.

    //       This was arrived at by running the test on a ROM built without the USE_DATA_PAGING defined.

	//       The time taken by this operation in the above configuration was used to set this threshold

	const TReal KH6DpNandThreshold = 1000.0;

	const TReal KH6NandThreshold = 1000.0;

	const TReal KH6RamThreshold = 350.0;

	TReal threshold = 0.0;

	switch (EComTestUtils::GetHardwareConfiguration())

		{

		case EPlatformH2RAM:

			threshold = KH2RamThreshold;

			break;

		case EPlatformH2NAND:

			threshold = KH2NandThreshold;

			break;

		case EPlatformH2NANDDP:

			threshold = KH2DpNandThreshold;

			break;

		case EPlatformH4RAM:

			threshold = KH4RamThreshold;

			break;

		case EPlatformH4MMC:

			threshold = KH4MMCThreshold;

			break;

		case EPlatformH4NAND:

			threshold = KH4NandThreshold;

			break;

		case EPlatformH4NANDDP:

			threshold = KH4DpNandThreshold;

			break;

		case EPlatformH6RAM:

			threshold = KH6RamThreshold;

			break;

		case EPlatformH6NAND:

			threshold = KH6NandThreshold;

			break;

		case EPlatformH6NANDDP:

			threshold = KH6DpNandThreshold;

			break;

		default:

			// Ignore results on winscw and whatever unknown platform.

			test.Printf(_L("Cache miss create perf test: %f ms\n"), aMilliseconds);

			return ETrue;

		}

		test.Printf(_L("Cache miss create perf test: %f ms (limit %f)\n"), aMilliseconds, threshold);

#ifdef _DEBUG

		// the thresholds are for urel only

		return ETrue;

#else

		return (threshold > aMilliseconds);

#endif

	}

/** Check list test in cache miss is within allowed limit.

@return True means test pass. False means fail.

*/

LOCAL_D TBool CheckCacheMissListPerf(TReal aMilliseconds)

	{

	// These thresholds have 33% margin, i.e. when the limit is 1200 ms,

	// the expected result is about 900 ms.

	const TReal KH2DpNandThreshold = 2250.0;

	const TReal KH2NandThreshold = 2250.0;

	const TReal KH2RamThreshold = 1000.0;

	const TReal KH4DpNandThreshold = 1350.0;

	const TReal KH4NandThreshold = 1350.0;

	const TReal KH4RamThreshold = 500.0;

	const TReal KH4MMCThreshold = 1350.0;

	//INFO: 'KH4MMCThreshold' is the threshold in case of WDP enabled configuration on H4.

    //       This was arrived at by running the test on a ROM built without the USE_DATA_PAGING defined.

	//       The time taken by this operation in the above configuration was used to set this threshold

	TReal threshold = 0.0;

	switch (EComTestUtils::GetHardwareConfiguration())

		{

		case EPlatformH2RAM:

			threshold = KH2RamThreshold;

			break;

		case EPlatformH2NAND:

			threshold = KH2NandThreshold;

			break;

		case EPlatformH2NANDDP:

			threshold = KH2DpNandThreshold;

			break;

		case EPlatformH4RAM:

			threshold = KH4RamThreshold;

			break;

		case EPlatformH4MMC:

			threshold = KH4MMCThreshold;

			break;

		case EPlatformH4NAND:

			threshold = KH4NandThreshold;

			break;

		case EPlatformH4NANDDP:

			threshold = KH4DpNandThreshold;

			break;

		default:

			// Ignore results on winscw and whatever unknown platform.

			test.Printf(_L("Cache miss list perf test: %f ms\n"), aMilliseconds);

			return ETrue;

		}

		test.Printf(_L("Cache miss list perf test: %f ms (limit %f)\n"), aMilliseconds, threshold);

#ifdef _DEBUG

		// the thresholds are for urel only

		return ETrue;

#else

		return (threshold > aMilliseconds);

#endif

	}

/** do custom resolver create test

@return total ticks spent during the create request.

*/

LOCAL_D TUint32 DoCreatePerfTestL(const TUid aResolverUid)

	{

	CExampleInterface::TExampleInterfaceInitParams initParams;

	initParams.integer	= 1;

	initParams.descriptor = NULL;

	TAny* p = NULL;

	TUid instanceKey;

	TEComResolverParams resolverparams;

	//Set any resolver data type as it will never reach the resolving part

	resolverparams.SetDataType(KDummyData);

	TUint32 startTime, endTime;

	startTime = User::FastCounter();

	p = REComSession::CreateImplementationL(KCExampleInterfaceUid,

											instanceKey,

											&initParams,

											resolverparams,

											aResolverUid);

	endTime = User::FastCounter();

	test(p != NULL);

	REComSession::DestroyedImplementation(instanceKey);

	CExampleInterface* impl = reinterpret_cast<CExampleInterface*>(p);

	delete impl;

	return ElaspedCounterTicks(startTime, endTime);

	}

/** do custom resolver list test

@return total ticks spent during the list request.

*/

LOCAL_D TUint32 DoListPerfTestL(const TUid aResolverUid)

	{

	TEComResolverParams resolverparams;

	//Set any resolver data type as it will never reach the resolving part

	resolverparams.SetDataType(KDummyData);

	RImplInfoPtrArray ifArray;

	TUint32 startTime, endTime;

	startTime = User::FastCounter();

	REComSession::ListImplementationsL(KCExampleInterfaceUid,

									   resolverparams,

									   aResolverUid,

									   ifArray);

	endTime = User::FastCounter();

	test(ifArray.Count() > 0);

	ifArray.ResetAndDestroy();

	return ElaspedCounterTicks(startTime, endTime);

	}

/**

@SYMTestCaseID		SYSLIB-ECOM-PT-4009

@SYMTestCaseDesc 	Time how long it takes to do 100 create requests and

					100 list requests involving custom resolvers.

@SYMTestPriority 	High

@SYMTestActions  	Run create and list requests in a loop.

@SYMTestExpectedResults on hw testing, the time must be within prescribed threshold.

@SYMCR CR1182

*/

LOCAL_D void RunResolverPerfTestL()

	{

	test.Next(_L(" @SYMTestCaseID:SYSLIB-ECOM-PT-4009 Time a number of create and list requests\n "));

	// If ECOM server is not yet running, the first message will take long

	// time because ECOM has to scandir and parse spi file. So do a dummy run

	// to kick start ECOM.

	DoListPerfTestL(MyResolvers[0]);

	const TInt KNumLoops = 100;

	TInt j;

	TUint32 createTicks = 0;

	TUint32 listTicks = 0;

	for (TInt i = 0; i < KNumLoops; i++)

		{

		j = i % KCustomResolverCacheSize;

		createTicks += DoCreatePerfTestL(MyResolvers[j]);

		listTicks += DoListPerfTestL(MyResolvers[j]);

		}

	REComSession::FinalClose();

	TReal createMs = FastCountToMilliseconds(createTicks);

	TBool createTestPass = CheckCreatePerf(createMs);

	TReal listMs = FastCountToMilliseconds(listTicks);

	TBool listTestPass = CheckListPerf(listMs);

	test(createTestPass);

	test(listTestPass);

	}

/**

@SYMTestCaseID		SYSLIB-ECOM-PT-4010

@SYMTestCaseDesc 	Verify CR1182 does not slow down list and create

	request significantly if there are a lot of cache misses.

@SYMTestPriority 	High

@SYMTestActions  	Repeatedly do list and create requests with five

	custom resolvers (1 more than max cache size). Time how long it takes.

@SYMTestExpectedResults on hw testing, the time must be within prescribed threshold.

@SYMCR CR1182

*/

LOCAL_D void CacheMissPerfTestL()

	{

	test.Next(_L(" @SYMTestCaseID:SYSLIB-ECOM-PT-4010 Cache miss performance test\n "));

	test(KArraySize > KCustomResolverCacheSize);

	const TInt KNumLoops = 100;

	TInt i, j;

	TUint32 createTicks = 0;

	for (i = 0; i < KNumLoops; i++)

		{

		j = i % KArraySize;

		createTicks += DoCreatePerfTestL(MyResolvers[j]);

		}

	TUint32 listTicks = 0;

	for (i = 0; i < KNumLoops; i++)

		{

		j = i % KArraySize;

		listTicks += DoListPerfTestL(MyResolvers[j]);

		}

	REComSession::FinalClose();

	TReal createMs = FastCountToMilliseconds(createTicks);

	TBool createTestPass = CheckCacheMissCreatePerf(createMs);

	TReal listMs = FastCountToMilliseconds(listTicks);

	TBool listTestPass = CheckCacheMissListPerf(listMs);

	test(createTestPass);

	test(listTestPass);

	}

LOCAL_C void RunTestL()