/* gzio.c -- IO on .gz files

 * Copyright (C) 1995-1998 Jean-loup Gailly.

 * For conditions of distribution and use, see copyright notice in zlib.h

 *

 * Compile this file with -DNO_DEFLATE to avoid the compression code.

 */

/* @(#) $Id$ */

#include "zutil.h"

// include this after zutil so we don't get warning anbout multiple definitons 

// of NULL Markr 6/9/199, Symbian.

#include <stdio.h> 

struct internal_state {int dummy;}; /* for buggy compilers */

#ifndef Z_BUFSIZE

#  ifdef MAXSEG_64K

#    define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */

#  else

#    define Z_BUFSIZE 16384

#  endif

#endif

#ifndef Z_PRINTF_BUFSIZE

#  define Z_PRINTF_BUFSIZE 4096

#endif

#define ALLOC(size) malloc(size)

#define TRYFREE(p) {if (p) free(p);}

static  const int gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */

/* gzip flag byte */

#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */

#define HEAD_CRC     0x02 /* bit 1 set: header CRC present */

#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */

#define ORIG_NAME    0x08 /* bit 3 set: original file name present */

#define COMMENT      0x10 /* bit 4 set: file comment present */

#define RESERVED     0xE0 /* bits 5..7: reserved */

typedef struct gz_stream {

    z_stream stream;

    int      z_err;   /* error code for last stream operation */

    int      z_eof;   /* set if end of input file */

    FILE     *file;   /* .gz file */

    Byte     *inbuf;  /* input buffer */

    Byte     *outbuf; /* output buffer */

    uLong    crc;     /* crc32 of uncompressed data */

    char     *msg;    /* error message */

    char     *path;   /* path name for debugging only */

    int      transparent; /* 1 if input file is not a .gz file */

    char     mode;    /* 'w' or 'r' */

    long     startpos; /* start of compressed data in file (header skipped) */

} gz_stream;

local gzFile gz_open      OF((const char *path, const char *mode, int  fd));

local int do_flush        OF((gzFile file, int flush));

local int    get_byte     OF((gz_stream *s));

local void   check_header OF((gz_stream *s));

local int    destroy      OF((gz_stream *s));

local void   putLong      OF((FILE *file, uLong x));

local uLong  getLong      OF((gz_stream *s));

/* ===========================================================================

     Opens a gzip (.gz) file for reading or writing. The mode parameter

   is as in fopen ("rb" or "wb"). The file is given either by file descriptor

   or path name (if fd == -1).

     gz_open return NULL if the file could not be opened or if there was

   insufficient memory to allocate the (de)compression state; errno

   can be checked to distinguish the two cases (if errno is zero, the

   zlib error is Z_MEM_ERROR).

*/

local gzFile gz_open (

    const char *path,

    const char *mode,

    int  fd)

{

    int err;

    int level = Z_DEFAULT_COMPRESSION; /* compression level */

    int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */

    char *p = (char*)mode;

    gz_stream *s;

    char fmode[80]; /* copy of mode, without the compression level */

    char *m = fmode;

    if (!path || !mode) return Z_NULL;

    s = (gz_stream *)ALLOC(sizeof(gz_stream));

    if (!s) return Z_NULL;

    s->stream.zalloc = (alloc_func)0;

    s->stream.zfree = (free_func)0;

    s->stream.opaque = (voidpf)0;

    s->stream.next_in = s->inbuf = Z_NULL;

    s->stream.next_out = s->outbuf = Z_NULL;

    s->stream.avail_in = s->stream.avail_out = 0;

    s->file = NULL;

    s->z_err = Z_OK;

    s->z_eof = 0;

    s->crc = crc32(0L, Z_NULL, 0);

    s->msg = NULL;

    s->transparent = 0;

    s->path = (char*)ALLOC(strlen(path)+1);

    if (s->path == NULL) {

        return destroy(s), (gzFile)Z_NULL;

    }

    strcpy(s->path, path); /* do this early for debugging */

    s->mode = '\0';

    do {

        if (*p == 'r') s->mode = 'r';

        if (*p == 'w' || *p == 'a') s->mode = 'w';

        if (*p >= '0' && *p <= '9') {

	    level = *p - '0';

	} else if (*p == 'f') {

	  strategy = Z_FILTERED;

	} else if (*p == 'h') {

	  strategy = Z_HUFFMAN_ONLY;

	} else {

	    *m++ = *p; /* copy the mode */

	}

    } while (*p++ && m != fmode + sizeof(fmode));

    if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;

    if (s->mode == 'w') {

#ifdef NO_DEFLATE

        err = Z_STREAM_ERROR;

#else

        err = deflateInit2(&(s->stream), level,

                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);

        /* windowBits is passed < 0 to suppress zlib header */

        s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);

#endif

        if (err != Z_OK || s->outbuf == Z_NULL) {

            return destroy(s), (gzFile)Z_NULL;

        }

    } else {

        s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);

        err = inflateInit2(&(s->stream), -MAX_WBITS);

        /* windowBits is passed < 0 to tell that there is no zlib header.

         * Note that in this case inflate *requires* an extra "dummy" byte

         * after the compressed stream in order to complete decompression and

         * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are

         * present after the compressed stream.

         */

        if (err != Z_OK || s->inbuf == Z_NULL) {

            return destroy(s), (gzFile)Z_NULL;

        }

    }

    s->stream.avail_out = Z_BUFSIZE;

    errno = 0;

    s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);

    if (s->file == NULL) {

        return destroy(s), (gzFile)Z_NULL;

    }

    if (s->mode == 'w') {

        /* Write a very simple .gz header:

         */

        fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],

             Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);

	s->startpos = 10L;

	/* We use 10L instead of ftell(s->file) to because ftell causes an

         * fflush on some systems. This version of the library doesn't use

         * startpos anyway in write mode, so this initialization is not

         * necessary.

         */

    } else {

	check_header(s); /* skip the .gz header */

	s->startpos = (ftell(s->file) - s->stream.avail_in);

    }

    return (gzFile)s;

}

/* ===========================================================================

     Opens a gzip (.gz) file for reading or writing.

*/

EXPORT_C gzFile ZEXPORT gzopen (

    const char *path,

    const char *mode)

{

    return gz_open (path, mode, -1);

}

/* ===========================================================================

     Associate a gzFile with the file descriptor fd. fd is not dup'ed here

   to mimic the behavio(u)r of fdopen.

*/

EXPORT_C gzFile ZEXPORT gzdopen (

    int fd,

    const char *mode)

{

    char name[20];

    if (fd < 0) return (gzFile)Z_NULL;

    sprintf(name, "<fd:%d>", fd); /* for debugging */

    return gz_open (name, mode, fd);

}

/* ===========================================================================

 * Update the compression level and strategy

 */

EXPORT_C int ZEXPORT gzsetparams (

    gzFile file,

    int level,

    int strategy)

{

    gz_stream *s = (gz_stream*)file;

    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;

    /* Make room to allow flushing */

    if (s->stream.avail_out == 0) {

	s->stream.next_out = s->outbuf;

	if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {

	    s->z_err = Z_ERRNO;

	}

	s->stream.avail_out = Z_BUFSIZE;

    }

    return deflateParams (&(s->stream), level, strategy);

}

/* ===========================================================================

     Read a byte from a gz_stream; update next_in and avail_in. Return EOF

   for end of file.

   IN assertion: the stream s has been sucessfully opened for reading.

*/

local int get_byte(

    gz_stream *s)

{

    if (s->z_eof) return EOF;

    if (s->stream.avail_in == 0) {

	errno = 0;

	s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);

	if (s->stream.avail_in == 0) {

	    s->z_eof = 1;

	    if (ferror(s->file)) s->z_err = Z_ERRNO;

	    return EOF;

	}

	s->stream.next_in = s->inbuf;

    }

    s->stream.avail_in--;

    return *(s->stream.next_in)++;

}

/* ===========================================================================

      Check the gzip header of a gz_stream opened for reading. Set the stream

    mode to transparent if the gzip magic header is not present; set s->err

    to Z_DATA_ERROR if the magic header is present but the rest of the header

    is incorrect.

    IN assertion: the stream s has already been created sucessfully;

       s->stream.avail_in is zero for the first time, but may be non-zero

       for concatenated .gz files.

*/

local void check_header(

    gz_stream *s)

{

    int method; /* method byte */

    int flags;  /* flags byte */

    uInt len;

    int c;

    /* Check the gzip magic header */

    for (len = 0; len < 2; len++) {

	c = get_byte(s);

	if (c != gz_magic[len]) {

	    if (len != 0) s->stream.avail_in++, s->stream.next_in--;

	    if (c != EOF) {

		s->stream.avail_in++, s->stream.next_in--;

		s->transparent = 1;

	    }

	    s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END;

	    return;

	}

    }

    method = get_byte(s);

    flags = get_byte(s);

    if (method != Z_DEFLATED || (flags & RESERVED) != 0) {

	s->z_err = Z_DATA_ERROR;

	return;

    }

    /* Discard time, xflags and OS code: */

    for (len = 0; len < 6; len++) (void)get_byte(s);

    if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */

	len  =  (uInt)get_byte(s);

	len += ((uInt)get_byte(s))<<8;

	/* len is garbage if EOF but the loop below will quit anyway */

	while (len-- != 0 && get_byte(s) != EOF) ;

    }

    if ((flags & ORIG_NAME) != 0) { /* skip the original file name */

	while ((c = get_byte(s)) != 0 && c != EOF) ;

    }

    if ((flags & COMMENT) != 0) {   /* skip the .gz file comment */

	while ((c = get_byte(s)) != 0 && c != EOF) ;

    }

    if ((flags & HEAD_CRC) != 0) {  /* skip the header crc */

	for (len = 0; len < 2; len++) (void)get_byte(s);

    }

    s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;

}

 /* ===========================================================================

 * Cleanup then free the given gz_stream. Return a zlib error code.

   Try freeing in the reverse order of allocations.

 */

local int destroy (

    gz_stream *s)

{

    int err = Z_OK;

    if (!s) return Z_STREAM_ERROR;

    TRYFREE(s->msg);

    if (s->stream.state != NULL) {

	if (s->mode == 'w') {

#ifdef NO_DEFLATE

	    err = Z_STREAM_ERROR;

#else

	    err = deflateEnd(&(s->stream));

#endif

	} else if (s->mode == 'r') {

	    err = inflateEnd(&(s->stream));

	}

    }

    if (s->file != NULL && fclose(s->file)) {

#ifdef ESPIPE

	if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */

#endif

	    err = Z_ERRNO;

    }

    if (s->z_err < 0) err = s->z_err;

    TRYFREE(s->inbuf);

    TRYFREE(s->outbuf);

    TRYFREE(s->path);

    TRYFREE(s);

    return err;

}

/* ===========================================================================

     Reads the given number of uncompressed bytes from the compressed file.

   gzread returns the number of bytes actually read (0 for end of file).

*/

EXPORT_C int ZEXPORT gzread (

    gzFile file,

    voidp buf,

    unsigned len)

{

    gz_stream *s = (gz_stream*)file;

    Bytef *start = (Bytef*)buf; /* starting point for crc computation */

    Byte  *next_out; /* == stream.next_out but not forced far (for MSDOS) */

    if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;

    if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;

    if (s->z_err == Z_STREAM_END) return 0;  /* EOF */

    next_out = (Byte*)buf;

    s->stream.next_out = (Bytef*)buf;

    s->stream.avail_out = len;

    while (s->stream.avail_out != 0) {

	if (s->transparent) {

	    /* Copy first the lookahead bytes: */

	    uInt n = s->stream.avail_in;

	    if (n > s->stream.avail_out) n = s->stream.avail_out;

	    if (n > 0) {

		zmemcpy(s->stream.next_out, s->stream.next_in, n);

		next_out += n;

		s->stream.next_out = next_out;

		s->stream.next_in   += n;

		s->stream.avail_out -= n;

		s->stream.avail_in  -= n;

	    }

	    if (s->stream.avail_out > 0) {

		s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out,

					     s->file);

	    }

	    len -= s->stream.avail_out;

	    s->stream.total_in  += (uLong)len;

	    s->stream.total_out += (uLong)len;

            if (len == 0) s->z_eof = 1;

	    return (int)len;

	}

        if (s->stream.avail_in == 0 && !s->z_eof) {

            errno = 0;

            s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);

            if (s->stream.avail_in == 0) {

                s->z_eof = 1;

		if (ferror(s->file)) {

		    s->z_err = Z_ERRNO;

		    break;

		}

            }

            s->stream.next_in = s->inbuf;

        }

        s->z_err = inflate(&(s->stream), Z_NO_FLUSH);

	if (s->z_err == Z_STREAM_END) {

	    /* Check CRC and original size */

	    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));

	    start = s->stream.next_out;

	    if (getLong(s) != s->crc) {

		s->z_err = Z_DATA_ERROR;

	    } else {

	        (void)getLong(s);

                /* The uncompressed length returned by above getlong() may

                 * be different from s->stream.total_out) in case of

		 * concatenated .gz files. Check for such files:

		 */

		check_header(s);

		if (s->z_err == Z_OK) {

		    uLong total_in = s->stream.total_in;

		    uLong total_out = s->stream.total_out;

		    inflateReset(&(s->stream));

		    s->stream.total_in = total_in;

		    s->stream.total_out = total_out;

		    s->crc = crc32(0L, Z_NULL, 0);

		}

	    }

	}

	if (s->z_err != Z_OK || s->z_eof) break;

    }

    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));

    return (int)(len - s->stream.avail_out);

}

/* ===========================================================================

      Reads one byte from the compressed file. gzgetc returns this byte

   or -1 in case of end of file or error.

*/

EXPORT_C int ZEXPORT gzgetc(

    gzFile file)

{

    unsigned char c;

    return gzread(file, &c, 1) == 1 ? c : -1;

}

/* ===========================================================================

      Reads bytes from the compressed file until len-1 characters are

   read, or a newline character is read and transferred to buf, or an

   end-of-file condition is encountered.  The string is then terminated

   with a null character.

      gzgets returns buf, or Z_NULL in case of error.

      The current implementation is not optimized at all.

*/

EXPORT_C char * ZEXPORT gzgets(

    gzFile file,

    char *buf,

    int len)

{

    char *b = buf;

    if (buf == Z_NULL || len <= 0) return Z_NULL;

    while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;

    *buf = '\0';

    return b == buf && len > 0 ? Z_NULL : b;

}

#ifndef NO_DEFLATE

/* ===========================================================================

     Writes the given number of uncompressed bytes into the compressed file.

   gzwrite returns the number of bytes actually written (0 in case of error).

*/

EXPORT_C int ZEXPORT gzwrite (

    gzFile file,

    const voidp buf,

    unsigned len)

{

    gz_stream *s = (gz_stream*)file;

    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;

    s->stream.next_in = (Bytef*)buf;

    s->stream.avail_in = len;

    while (s->stream.avail_in != 0) {

        if (s->stream.avail_out == 0) {

            s->stream.next_out = s->outbuf;

            if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {

                s->z_err = Z_ERRNO;

                break;

            }

            s->stream.avail_out = Z_BUFSIZE;

        }

        s->z_err = deflate(&(s->stream), Z_NO_FLUSH);

        if (s->z_err != Z_OK) break;

    }

    s->crc = crc32(s->crc, (const Bytef *)buf, len);

    return (int)(len - s->stream.avail_in);

}

/* ===========================================================================

     Converts, formats, and writes the args to the compressed file under

   control of the format string, as in fprintf. gzprintf returns the number of

   uncompressed bytes actually written (0 in case of error).

*/

// This function has been modified to use heap memory instead of the stack for the buffer.

// Markr 6/9/99 Symbian.

#ifdef STDC