--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/genericopenlibs/openenvcore/include/sys/serial.h	Tue Feb 02 02:01:42 2010 +0200
@@ -0,0 +1,153 @@
+/*-
+ * Copyright (c) 2004 Poul-Henning Kamp
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file contains definitions which pertain to serial ports as such,
+ * (both async and sync), but which do not necessarily have anything to
+ * do with tty processing.
+ *
+ * $FreeBSD: src/sys/sys/serial.h,v 1.2 2004/06/25 10:56:43 phk Exp $
+ */
+
+#ifndef _SYS_SERIAL_H_
+#define	_SYS_SERIAL_H_
+
+#ifndef __SYMBIAN32__
+
+/*
+ * Indentification of modem control signals.  These definitions match
+ * the TIOCMGET definitions in <sys/ttycom.h> shifted a bit down, and
+ * that identity is enforced with CTASSERT at the bottom of kern/tty.c
+ * Both the modem bits and delta bits must fit in 16 bit.
+ */
+#define		SER_DTR	0x0001		/* data terminal ready */
+#define		SER_RTS	0x0002		/* request to send */
+#define		SER_STX	0x0004		/* secondary transmit */
+#define		SER_SRX	0x0008		/* secondary receive */
+#define		SER_CTS	0x0010		/* clear to send */
+#define		SER_DCD	0x0020		/* data carrier detect */
+#define		SER_RI 	0x0040		/* ring indicate */
+#define		SER_DSR	0x0080		/* data set ready */
+
+/* Delta bits, used to indicate which signals should/was affected */
+#define		SER_DELTA(x)	((x) << 8)
+
+#define		SER_DDTR SER_DELTA(SER_DTR)
+#define		SER_DRTS SER_DELTA(SER_RTS)
+#define		SER_DSTX SER_DELTA(SER_STX)
+#define		SER_DSRX SER_DELTA(SER_SRX)
+#define		SER_DCTS SER_DELTA(SER_CTS)
+#define		SER_DDCD SER_DELTA(SER_DCD)
+#define		SER_DRI  SER_DELTA(SER_RI)
+#define		SER_DDSR SER_DELTA(SER_DSR)
+
+#else
+/**
+notifications
+*/
+#define	KNotifyBreakInt				0x01
+#define	KNotifyCD					0x02
+#define	KNotifyCTS					0x04
+#define	KNotifyDataAvailable		0x08
+#define	KNotifyDSR					0x10
+#define	KNotifyFramingError			0x20
+#define	KNotifyOutputEmpty			0x40
+#define	KNotifyOverrunError			0x80
+#define	KNotifyParityError			0x100
+#define	KNotifyRI					0x200
+
+/**
+enums, #defines and struct for serial port settings
+*/
+enum DataBits {DBits5,DBits6,DBits7,DBits8};
+
+enum StopBits {Stop1,Stop2};
+
+enum Parity {ParityNone,ParityEven,ParityOdd,ParityMark,ParitySpace};
+
+enum Bps
+	{
+	Bps50,Bps75,Bps110,Bps134,Bps150,Bps300,Bps600,Bps1200,
+	Bps1800,Bps2000,Bps2400,Bps3600,Bps4800,Bps7200,Bps9600,
+	Bps19200,Bps38400,Bps57600,Bps115200,Bps230400,Bps460800,
+	Bps576000,Bps1152000,Bps4000000,
+	BpsSpecial=0x80000000
+	};
+
+enum Fifo {FifoEnable,FifoDisable};
+
+enum Sir {SIREnable,SIRDisable};
+//
+#define ConfigMaxTerminators 4
+//
+#define ConfigObeyXoff 0x01
+#define ConfigSendXoff 0x02
+#define ConfigObeyCTS 0x04
+#define ConfigFailCTS 0x08
+#define ConfigObeyDSR 0x10
+#define ConfigFailDSR 0x20
+#define ConfigObeyDCD 0x40
+#define ConfigFailDCD 0x80
+#define ConfigFreeRTS 0x100
+#define ConfigFreeDTR 0x200
+#define ConfigWriteBufferedComplete 0x80000000
+//
+#define ConfigParityErrorFail 0
+#define ConfigParityErrorIgnore 0x01
+#define ConfigParityErrorReplaceChar 0x02
+#define ConfigXonXoffDebug 0x80000000
+//
+#define SignalCTS 0x01
+#define SignalDSR 0x02
+#define SignalDCD 0x04
+#define SignalRNG 0x08
+#define SignalRTS 0x10
+#define SignalDTR 0x20
+
+#define ConfigSIRPulseWidthMaximum 0x01
+#define ConfigSIRPulseWidthMinimum 0x02
+//
+
+typedef struct
+	{
+	enum Bps iRate;
+	enum DataBits iDataBits;
+	enum StopBits iStopBits;
+	enum Parity iParity;
+	unsigned int iHandshake;
+	unsigned int iParityError;
+	unsigned int iFifo;
+	int iSpecialRate;
+	int iTerminatorCount;
+	char iTerminator[ConfigMaxTerminators];
+	char iXonChar;
+	char iXoffChar;
+	char iParityErrorChar;
+	enum Sir iSIREnable;
+	unsigned int iSIRSettings;
+	} SerialConfig;
+
+#endif //__SYMBIAN32__
+
+#endif /* !_SYS_SERIAL_H_ */