lowlevellibsandfws/pluginfw/Test_Bed/ComponentInfoTest/ComponentInfoTransitionValidation.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/lowlevellibsandfws/pluginfw/Test_Bed/ComponentInfoTest/ComponentInfoTransitionValidation.h Tue Feb 02 02:01:42 2010 +0200
@@ -0,0 +1,239 @@
+// Copyright (c) 1997-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+// The definitions of the transition classes upon the CComponentInfo class methods.
+//
+//
+
+#ifndef __COMPONENTINFOTRANSITIONVALIDATION_H__
+#define __COMPONENTINFOTRANSITIONVALIDATION_H__
+
+#include "ComponentInfoTransitions.h"
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the CtorUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CComponentInfo test class for a transition.
+ */
+class TComponentInfo_Ctor_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TComponentInfo_Ctor_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage : Default constructor
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TComponentInfo_Ctor_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Checks the start state of the ComponentInfo transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TComponentInfo_Ctor_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TComponentInfo_Ctor_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TComponentInfo_Ctor_TransitionValidator
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the DtorUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CComponentInfo test class for a transition.
+ */
+class TComponentInfo_Dtor_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TComponentInfo_Dtor_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TComponentInfo_Dtor_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TComponentInfo_Dtor_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TComponentInfo_Dtor_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TComponentInfo_Dtor_TransitionValidator
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the EntryUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CComponentInfo test class for a transition.
+ */
+class TComponentInfo_Entry_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TComponentInfo_Entry_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TComponentInfo_Entry_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TComponentInfo_Entry_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TComponentInfo_Entry_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TComponentInfo_Entry_TransitionValidator
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the UnitTestsInfoUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CComponentInfo test class for a transition.
+ */
+class TComponentInfo_UnitTestsInfo_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TComponentInfo_UnitTestsInfo_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TComponentInfo_UnitTestsInfo_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TComponentInfo_UnitTestsInfo_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TComponentInfo_UnitTestsInfo_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TComponentInfo_UnitTestsInfo_TransitionValidator
+
+
+
+#include "ComponentInfoTransitionValidation.inl"
+
+#endif // __COMPONENTINFOTRANSITIONVALIDATION_H__
+