--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/lowlevellibsandfws/pluginfw/Test_Bed/DataLoggerTest/DataLoggerTransitionValidation.h Tue Feb 02 02:01:42 2010 +0200
@@ -0,0 +1,503 @@
+// Copyright (c) 1997-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+// The definitions of the transition classes upon the CDataLogger class methods.
+//
+//
+
+#ifndef __DATALOGGERTRANSITIONVALIDATION_H__
+#define __DATALOGGERTRANSITIONVALIDATION_H__
+
+#include "DataLoggerTransitions.h"
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the CtorUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CDataLogger test class for a transition.
+ */
+class TDataLogger_Ctor_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TDataLogger_Ctor_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TDataLogger_Ctor_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_Ctor_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_Ctor_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TDataLogger_Ctor_TransitionValidator
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the DtorUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CDataLogger test class for a transition.
+ */
+class TDataLogger_Dtor_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TDataLogger_Dtor_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TDataLogger_Dtor_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_Dtor_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_Dtor_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TDataLogger_Dtor_TransitionValidator
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the DumpMemoryBlockUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CDataLogger test class for a transition.
+ */
+class TDataLogger_DumpMemoryBlock_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TDataLogger_DumpMemoryBlock_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TDataLogger_DumpMemoryBlock_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_DumpMemoryBlock_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_DumpMemoryBlock_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TDataLogger_DumpMemoryBlock_TransitionValidator
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the LogInformationUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CDataLogger test class for a transition.
+ */
+class TDataLogger_LogInformation_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TDataLogger_LogInformation_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TDataLogger_LogInformation_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_LogInformation_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_LogInformation_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TDataLogger_LogInformation_TransitionValidator
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the LogInformationNarrowUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CDataLogger test class for a transition.
+ */
+class TDataLogger_LogInformationNarrow_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TDataLogger_LogInformationNarrow_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TDataLogger_LogInformationNarrow_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_LogInformationNarrow_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_LogInformationNarrow_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TDataLogger_LogInformationNarrow_TransitionValidator
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the LogInformationWithParametersUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CDataLogger test class for a transition.
+ */
+class TDataLogger_LogInformationWithParameters_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TDataLogger_LogInformationWithParameters_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TDataLogger_LogInformationWithParameters_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_LogInformationWithParameters_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_LogInformationWithParameters_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TDataLogger_LogInformationWithParameters_TransitionValidator
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the LogInformationWithParametersNarrowUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CDataLogger test class for a transition.
+ */
+class TDataLogger_LogInformationWithParametersNarrow_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TDataLogger_LogInformationWithParametersNarrow_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TDataLogger_LogInformationWithParametersNarrow_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_LogInformationWithParametersNarrow_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_LogInformationWithParametersNarrow_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TDataLogger_LogInformationWithParametersNarrow_TransitionValidator
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the ReportInformationUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CDataLogger test class for a transition.
+ */
+class TDataLogger_ReportInformation_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TDataLogger_ReportInformation_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TDataLogger_ReportInformation_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_ReportInformation_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_ReportInformation_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TDataLogger_ReportInformation_TransitionValidator
+
+// ______________________________________________________________________________
+//
+/**
+ @internalComponent
+
+ Comments : Provide all the ReportInformationWithParametersUnit Test's specific
+ validatation for the state of a transition before and after its execution.
+ on the CDataLogger test class for a transition.
+ */
+class TDataLogger_ReportInformationWithParameters_TransitionValidator : public TTransitionValidator
+ {
+public:
+ /**
+ @fn TDataLogger_ReportInformationWithParameters_TransitionValidator(CUnitTestContext& aUTContext)
+ Intended Usage :
+ @leave KErrNoMemory
+ @since 7.0
+ @param aUTContext The context within which this transition is executing
+ */
+ inline TDataLogger_ReportInformationWithParameters_TransitionValidator(CUnitTestContext& aUTContext);
+
+ /**
+ @fn ValidatePreConditions()
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ Error Condition : Invalid pre-conditions
+ @since 7.0
+ @return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_ReportInformationWithParameters_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePreConditions();
+
+ /**
+ @fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
+ Intended Usage : Implemented by the developer to check the
+ end state of the transition behaviour.
+ When overriding, if the transition calls an asynchronous function
+ ValidatePostConditions will be called twice. Firstly, after the
+ asynchronous function has been called and, secondly, after the
+ asynchronous request has completed. The parameter aAsyncState can
+ be used to distinguish between these two cases.
+ Error Condition : Invalid post-conditions.
+ @since 7.0
+ @param aAsyncState EAsyncCalled if the async function has been just been called,
+ EAsyncCompleted if the function has completed.
+ @return TBool ETrue if the post-conditions were valid, EFalse otherwise.
+ @pre TDataLogger_ReportInformationWithParameters_TransitionValidator is fully constructed.
+ @post No change to the iUTContext class.
+ */
+ virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
+ }; // TDataLogger_ReportInformationWithParameters_TransitionValidator
+
+#include "DataLoggerTransitionValidation.inl"
+
+#endif // __DATALOGGERTRANSITIONVALIDATION_H__
+