// Copyright (c) 1997-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
// The definition of the validation classes for the CResolver class tests.
// 
//

#ifndef __RESOLVERTRANSITIONVALIDATION_H__
#define __RESOLVERTRANSITIONVALIDATION_H__

// ______________________________________________________________________________
//
/**
	@internalComponent
 
	Comments : Provide all the CtorUnit Test's specific
	validatation for the state of a transition before and after its execution.
	on the CDefaultResolver test class for a transition.
 */
class TDefaultResolver_Ctor_TransitionValidator : public TTransitionValidator
	{
public:
	/**
		@fn				TDefaultResolver_Ctor_TransitionValidator(CUnitTestContext& aUTContext)
		Intended Usage	: Default constructor	
		@leave  		KErrNoMemory
		@since			7.0
		@param			aUTContext The context within which this transition is executing
	 */
	inline TDefaultResolver_Ctor_TransitionValidator(CUnitTestContext& aUTContext);

	/**
		@fn				ValidatePreConditions()
		Intended Usage	: Implemented by the developer to check the
						end state of the transition behaviour.
		Error Condition	: Invalid pre-conditions
		@since			7.0
		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.
		@pre 			TDefaultResolver_Ctor_TransitionValidator is fully constructed.
		@post			No change to the iUTContext class.
	*/
	virtual inline TBool ValidatePreConditions();

	/**
		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)
		Intended Usage	:	Implemented by the developer to check the
						end state of the transition behaviour.
						When overriding, if the transition calls an asynchronous function
						ValidatePostConditions will be called twice. Firstly, after the
						asynchronous function has been called and, secondly, after the 
						asynchronous request has completed. The parameter aAsyncState can
						be used to distinguish between these two cases.
		Error Condition	: Invalid post-conditions.
		@since			7.0
		@param			aAsyncState EAsyncCalled if the async function has been just been called,
						EAsyncCompleted if the function has completed.
		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.
		@pre 			TDefaultResolver_Ctor_TransitionValidator is fully constructed.
		@post			No change to the iUTContext class.
	*/
	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
	};	// TDefaultResolver_Ctor_TransitionValidator

// ______________________________________________________________________________
//
/**
	@internalComponent

	Comments : Provide all the DtorUnit Test's specific
	validatation for the state of a transition before and after its execution.
	on the CDefaultResolver test class for a transition.
 */
class TDefaultResolver_Dtor_TransitionValidator : public TTransitionValidator
	{
public:
	/**
		@fn				TDefaultResolver_Dtor_TransitionValidator(CUnitTestContext& aUTContext)
		Intended Usage	:	
		@leave  		KErrNoMemory
		@since			7.0
		@param			aUTContext The context within which this transition is executing
	 */
	inline TDefaultResolver_Dtor_TransitionValidator(CUnitTestContext& aUTContext);

	/**
		@fn				ValidatePreConditions()
		Intended Usage	: Implemented by the developer to check the
						end state of the transition behaviour.
		Error Condition	: Invalid pre-conditions
		@since			7.0
		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.
		@pre 			TDefaultResolver_Dtor_TransitionValidator is fully constructed.
		@post			No change to the iUTContext class.
	*/
	virtual inline TBool ValidatePreConditions();

	/**
		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)
		Intended Usage	:	Implemented by the developer to check the
						end state of the transition behaviour.
						When overriding, if the transition calls an asynchronous function
						ValidatePostConditions will be called twice. Firstly, after the
						asynchronous function has been called and, secondly, after the 
						asynchronous request has completed. The parameter aAsyncState can
						be used to distinguish between these two cases.
		Error Condition	: Invalid post-conditions.
		@since			7.0
		@param			aAsyncState EAsyncCalled if the async function has been just been called,
						EAsyncCompleted if the function has completed.
		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.
		@pre 			TDefaultResolver_Dtor_TransitionValidator is fully constructed.
		@post			No change to the iUTContext class.
	*/
	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
	};	// TDefaultResolver_Dtor_TransitionValidator

// ______________________________________________________________________________
//
/**
	@internalComponent

	Comments : Provide all the DefaultUnit Test's specific
	validatation for the state of a transition before and after its execution.
	on the CDefaultResolver test class for a transition.
 */
class TDefaultResolver_Default_TransitionValidator : public TTransitionValidator
	{
public:
	/**
		@fn				TDefaultResolver_Default_TransitionValidator(CUnitTestContext& aUTContext)
		Intended Usage	:	
		@leave  		KErrNoMemory
		@since			7.0
		@param			aUTContext The context within which this transition is executing
	 */
	inline TDefaultResolver_Default_TransitionValidator(CUnitTestContext& aUTContext);

	/**
		@fn				ValidatePreConditions()
		Intended Usage	: Implemented by the developer to check the
						end state of the transition behaviour.
		Error Condition	: Invalid pre-conditions
		@since			7.0
		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.
		@pre 			TDefaultResolver_Default_TransitionValidator is fully constructed.
		@post			No change to the iUTContext class.
	*/
	virtual inline TBool ValidatePreConditions();

	/**
		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)
		Intended Usage	:	Implemented by the developer to check the
						end state of the transition behaviour.
						When overriding, if the transition calls an asynchronous function
						ValidatePostConditions will be called twice. Firstly, after the
						asynchronous function has been called and, secondly, after the 
						asynchronous request has completed. The parameter aAsyncState can
						be used to distinguish between these two cases.
		Error Condition	: Invalid post-conditions.
		@since			7.0
		@param			aAsyncState EAsyncCalled if the async function has been just been called,
						EAsyncCompleted if the function has completed.
		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.
		@pre 			TDefaultResolver_Default_TransitionValidator is fully constructed.
		@post			No change to the iUTContext class.
	*/
	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
	};	// TDefaultResolver_Default_TransitionValidator

// ______________________________________________________________________________
//
/**
	@internalComponent

	Comments : Provide all the IdentifyImplementationLUnit Test's specific
	validatation for the state of a transition before and after its execution.
	on the CDefaultResolver test class for a transition.
 */
class TDefaultResolver_IdentifyImplementationL_TransitionValidator : public TTransitionValidator
	{
public:
	/**
		@fn				TDefaultResolver_IdentifyImplementationL_TransitionValidator(CUnitTestContext& aUTContext)
		Intended Usage	:	
		@leave  		KErrNoMemory
		@since			7.0
		@param			aUTContext The context within which this transition is executing
	 */
	inline TDefaultResolver_IdentifyImplementationL_TransitionValidator(CUnitTestContext& aUTContext);

	/**
		@fn				ValidatePreConditions()
		Intended Usage	: Implemented by the developer to check the
						end state of the transition behaviour.
		Error Condition	: Invalid pre-conditions
		@since			7.0
		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.
		@pre 			TDefaultResolver_IdentifyImplementationL_TransitionValidator is fully constructed.
		@post			No change to the iUTContext class.
	*/
	virtual inline TBool ValidatePreConditions();

	/**
		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)
		Intended Usage	:	Implemented by the developer to check the
						end state of the transition behaviour.
						When overriding, if the transition calls an asynchronous function
						ValidatePostConditions will be called twice. Firstly, after the
						asynchronous function has been called and, secondly, after the 
						asynchronous request has completed. The parameter aAsyncState can
						be used to distinguish between these two cases.
		Error Condition	: Invalid post-conditions.
		@since			7.0
		@param			aAsyncState EAsyncCalled if the async function has been just been called,
						EAsyncCompleted if the function has completed.
		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.
		@pre 			TDefaultResolver_IdentifyImplementationL_TransitionValidator is fully constructed.
		@post			No change to the iUTContext class.
	*/
	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
	};	// TDefaultResolver_IdentifyImplementationL_TransitionValidator

// ______________________________________________________________________________
//
/**
	@internalComponent

	Comments : Provide all the MatchUnit Test's specific
	validatation for the state of a transition before and after its execution.
	on the CDefaultResolver test class for a transition.
 */
class TDefaultResolver_Match_TransitionValidator : public TTransitionValidator
	{
public:
	/**
		@fn				TDefaultResolver_Match_TransitionValidator(CUnitTestContext& aUTContext)
		Intended Usage	:	
		@leave  		KErrNoMemory
		@since			7.0
		@param			aUTContext The context within which this transition is executing
	 */
	inline TDefaultResolver_Match_TransitionValidator(CUnitTestContext& aUTContext);

	/**
		@fn				ValidatePreConditions()
		Intended Usage	: Implemented by the developer to check the
						end state of the transition behaviour.
		Error Condition	: Invalid pre-conditions
		@since			7.0
		@return			TBool ETrue if the pre-conditions were valid, EFalse otherwise.
		@pre 			TDefaultResolver_Match_TransitionValidator is fully constructed.
		@post			No change to the iUTContext class.
	*/
	virtual inline TBool ValidatePreConditions();

	/**
		@fn				ValidatePostConditions(TTestBedAsyncState aAsyncState)
		Intended Usage	:	Implemented by the developer to check the
						end state of the transition behaviour.
						When overriding, if the transition calls an asynchronous function
						ValidatePostConditions will be called twice. Firstly, after the
						asynchronous function has been called and, secondly, after the 
						asynchronous request has completed. The parameter aAsyncState can
						be used to distinguish between these two cases.
		Error Condition	: Invalid post-conditions.
		@since			7.0
		@param			aAsyncState EAsyncCalled if the async function has been just been called,
						EAsyncCompleted if the function has completed.
		@return			TBool ETrue if the post-conditions were valid, EFalse otherwise.
		@pre 			TDefaultResolver_Match_TransitionValidator is fully constructed.
		@post			No change to the iUTContext class.
	*/
	virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
	};	// TDefaultResolver_Match_TransitionValidator

#include "ResolverTransitionValidation.inl"

#endif		// __RESOLVERTRANSITIONVALIDATION_H__