// Copyright (c) 2007-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of the License "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
// ROM-specific macros for syslibs_ecom component.
// Intended for customisation by phone manufacturers.
// Read ECOM How To FAQ.doc if need more information about the
// patchable constants listed below.
// 
//

#ifndef __ECOMPATCHCONSTANTS_HBY__
#define __ECOMPATCHCONSTANTS_HBY__


// Macro ECOM_PATCHDATA_KLISTIMPLBUFFERSIZE represents the
// value of the patchable constant KListImplBufferSize. It is used
// to define the size of the buffer that is pre-allocated on the
// ECOM client side to hold data returned by the
// REComSession::ListImplementations() API. ECOM How To FAQ
// explains how to determine the optimum value for this constant.
// The default value of KListImplBufferSize is 2048.
// 
// This patchable constant was first introduced in Symbian_OS_v9.3.
// At that time ECOM How To FAQ advised device builders to use
// the "patchdata" command directly in any obey file to patch this
// constant. The old scheme has been deprecated and the macro below
// is the supported published mechanism for changing this patchable
// constant. Please ensure that if this constant
// is patched in another obey file, do not uncomment the macro
// definition below. Otherwise this constant will be patched twice
// with unpredictable result.
//
// To patch this constant, remove the comment characters and replace 2048
// with the desired value.

// #define ECOM_PATCHDATA_KLISTIMPLBUFFERSIZE 2048


// Macro ECOM_PATCHDATA_KDISCOVERYDISABLEDDRIVELIST represents the
// value of the patchable constant KDiscoveryDisabledDriveList.
// This constant lets licensees specify a list of drives which they
// do not want ECOM to scan, e.g. because the drives can never have
// valid plug-ins. 
// This is a 32-bit integer with each bit representing a drive to disable:
// 0x1 disables drive A, 0x2 disables drive B etc. There are only 25 drive
// letters supported (A:->Y:) therefore the last 7 bits are ignored.
// Note that Read-only internal drives cannot be disabled.
// The default value of KDiscoveryDisabledDriveList is 0, meaning all
// drives are enabled.
//
// To patch this constant, remove the comment characters and replace 0
// with the desired value.

// #define ECOM_PATCHDATA_KDISCOVERYDISABLEDDRIVELIST 0x0



// Macro ECOM_PATCHDATA_KCUSTOMRESOLVERCACHESIZE represents the
// value of the patchable constant KCustomResolverCacheSize.
// This constant specifies the maximum number of resolver DLLs ECOM can cache.
// When the cache queue is full, the next custom resolver DLL requested by
// client will bump off the oldest DLL in the cache.
// The default value of KCustomResolverCacheSize is 4, meaning ECOM will
// cache maximum of four resolver DLLs.
//
// To patch this constant, remove the comment characters and replace 4
// with the desired value.

// #define ECOM_PATCHDATA_KCUSTOMRESOLVERCACHESIZE 4



// Macro ECOM_PATCHDATA_KCUSTOMRESOLVERCACHETIMEOUT represents the
// value of the patchable constant KCustomResolverCacheTimeout.
// This constant specifies the timeout in microseconds that a resolver DLL is
// kept in cache. When the time expires, the resolver DLL is released from
// memory. The default value of KCustomResolverCacheTimeout is 4000000.
// That means if no client uses a cached resolver DLL, the DLL will be
// unloaded after four seconds.
//
// To patch this constant, remove the comment characters and replace 4000000
// with the desired value.

// #define ECOM_PATCHDATA_KCUSTOMRESOLVERCACHETIMEOUT 4000000

#endif