lowlevellibsandfws/pluginfw/Test_Bed/DefaultLogOutputTest/DefaultLogOutputTransitionValidation.h
// Copyright (c) 1997-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
// The definitions of the transition classes upon the CDefaultLogOutput class methods.
//
//
#ifndef __DEFAULTLOGOUTPUTTRANSITIONVALIDATION_H__
#define __DEFAULTLOGOUTPUTTRANSITIONVALIDATION_H__
#include "DefaultLogOutputTransitions.h"
// ______________________________________________________________________________
//
/**
@internalComponent
Comments : Provide all the CtorUnit Test's specific
validatation for the state of a transition before and after its execution.
on the CDefaultLogOutput test class for a transition.
*/
class TDefaultLogOutput_Ctor_TransitionValidator : public TTransitionValidator
{
public:
/**
@fn TDefaultLogOutput_Ctor_TransitionValidator(CUnitTestContext& aUTContext)
Intended Usage :
@leave KErrNoMemory
@since 7.0
@param aUTContext The context within which this transition is executing
*/
inline TDefaultLogOutput_Ctor_TransitionValidator(CUnitTestContext& aUTContext);
/**
@fn ValidatePreConditions()
Intended Usage : Implemented by the developer to check the
end state of the transition behaviour.
Error Condition : Invalid pre-conditions
@since 7.0
@return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
@pre TDefaultLogOutput_Ctor_TransitionValidator is fully constructed.
@post No change to the iUTContext class.
*/
virtual inline TBool ValidatePreConditions();
/**
@fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
Intended Usage : Implemented by the developer to check the
end state of the transition behaviour.
When overriding, if the transition calls an asynchronous function
ValidatePostConditions will be called twice. Firstly, after the
asynchronous function has been called and, secondly, after the
asynchronous request has completed. The parameter aAsyncState can
be used to distinguish between these two cases.
Error Condition : Invalid post-conditions.
@since 7.0
@param aAsyncState EAsyncCalled if the async function has been just been called,
EAsyncCompleted if the function has completed.
@return TBool ETrue if the post-conditions were valid, EFalse otherwise.
@pre TDefaultLogOutput_Ctor_TransitionValidator is fully constructed.
@post No change to the iUTContext class.
*/
virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
}; // TDefaultLogOutput_Ctor_TransitionValidator
// ______________________________________________________________________________
//
/**
@internalComponent
Comments : Provide all the DtorUnit Test's specific
validatation for the state of a transition before and after its execution.
on the CDefaultLogOutput test class for a transition.
*/
class TDefaultLogOutput_Dtor_TransitionValidator : public TTransitionValidator
{
public:
/**
@fn TDefaultLogOutput_Dtor_TransitionValidator(CUnitTestContext& aUTContext)
Intended Usage :
@leave KErrNoMemory
@since 7.0
@param aUTContext The context within which this transition is executing
*/
inline TDefaultLogOutput_Dtor_TransitionValidator(CUnitTestContext& aUTContext);
/**
@fn ValidatePreConditions()
Intended Usage : Implemented by the developer to check the
end state of the transition behaviour.
Error Condition : Invalid pre-conditions
@since 7.0
@return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
@pre TDefaultLogOutput_Dtor_TransitionValidator is fully constructed.
@post No change to the iUTContext class.
*/
virtual inline TBool ValidatePreConditions();
/**
@fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
Intended Usage : Implemented by the developer to check the
end state of the transition behaviour.
When overriding, if the transition calls an asynchronous function
ValidatePostConditions will be called twice. Firstly, after the
asynchronous function has been called and, secondly, after the
asynchronous request has completed. The parameter aAsyncState can
be used to distinguish between these two cases.
Error Condition : Invalid post-conditions.
@since 7.0
@param aAsyncState EAsyncCalled if the async function has been just been called,
EAsyncCompleted if the function has completed.
@return TBool ETrue if the post-conditions were valid, EFalse otherwise.
@pre TDefaultLogOutput_Dtor_TransitionValidator is fully constructed.
@post No change to the iUTContext class.
*/
virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
}; // TDefaultLogOutput_Dtor_TransitionValidator
// ______________________________________________________________________________
//
/**
@internalComponent
Comments : Provide all the OpenUnit Test's specific
validatation for the state of a transition before and after its execution.
on the CDefaultLogOutput test class for a transition.
*/
class TDefaultLogOutput_Open_TransitionValidator : public TTransitionValidator
{
public:
/**
@fn TDefaultLogOutput_Open_TransitionValidator(CUnitTestContext& aUTContext)
Intended Usage :
@leave KErrNoMemory
@since 7.0
@param aUTContext The context within which this transition is executing
*/
inline TDefaultLogOutput_Open_TransitionValidator(CUnitTestContext& aUTContext);
/**
@fn ValidatePreConditions()
Intended Usage : Implemented by the developer to check the
end state of the transition behaviour.
Error Condition : Invalid pre-conditions
@since 7.0
@return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
@pre TDefaultLogOutput_Open_TransitionValidator is fully constructed.
@post No change to the iUTContext class.
*/
virtual inline TBool ValidatePreConditions();
/**
@fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
Intended Usage : Implemented by the developer to check the
end state of the transition behaviour.
When overriding, if the transition calls an asynchronous function
ValidatePostConditions will be called twice. Firstly, after the
asynchronous function has been called and, secondly, after the
asynchronous request has completed. The parameter aAsyncState can
be used to distinguish between these two cases.
Error Condition : Invalid post-conditions.
@since 7.0
@param aAsyncState EAsyncCalled if the async function has been just been called,
EAsyncCompleted if the function has completed.
@return TBool ETrue if the post-conditions were valid, EFalse otherwise.
@pre TDefaultLogOutput_Open_TransitionValidator is fully constructed.
@post No change to the iUTContext class.
*/
virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
}; // TDefaultLogOutput_Open_TransitionValidator
// ______________________________________________________________________________
//
/**
@internalComponent
Comments : Provide all the CloseUnit Test's specific
validatation for the state of a transition before and after its execution.
on the CDefaultLogOutput test class for a transition.
*/
class TDefaultLogOutput_Close_TransitionValidator : public TTransitionValidator
{
public:
/**
@fn TDefaultLogOutput_Close_TransitionValidator(CUnitTestContext& aUTContext)
Intended Usage :
@leave KErrNoMemory
@since 7.0
@param aUTContext The context within which this transition is executing
*/
inline TDefaultLogOutput_Close_TransitionValidator(CUnitTestContext& aUTContext);
/**
@fn ValidatePreConditions()
Intended Usage : Implemented by the developer to check the
end state of the transition behaviour.
Error Condition : Invalid pre-conditions
@since 7.0
@return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
@pre TDefaultLogOutput_Close_TransitionValidator is fully constructed.
@post No change to the iUTContext class.
*/
virtual inline TBool ValidatePreConditions();
/**
@fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
Intended Usage : Implemented by the developer to check the
end state of the transition behaviour.
When overriding, if the transition calls an asynchronous function
ValidatePostConditions will be called twice. Firstly, after the
asynchronous function has been called and, secondly, after the
asynchronous request has completed. The parameter aAsyncState can
be used to distinguish between these two cases.
Error Condition : Invalid post-conditions.
@since 7.0
@param aAsyncState EAsyncCalled if the async function has been just been called,
EAsyncCompleted if the function has completed.
@return TBool ETrue if the post-conditions were valid, EFalse otherwise.
@pre TDefaultLogOutput_Close_TransitionValidator is fully constructed.
@post No change to the iUTContext class.
*/
virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
}; // TDefaultLogOutput_Close_TransitionValidator
// ______________________________________________________________________________
//
/**
@internalComponent
Comments : Provide all the WriteUnit Test's specific
validatation for the state of a transition before and after its execution.
on the CDefaultLogOutput test class for a transition.
*/
class TDefaultLogOutput_Write_TransitionValidator : public TTransitionValidator
{
public:
/**
@fn TDefaultLogOutput_Write_TransitionValidator(CUnitTestContext& aUTContext)
Intended Usage :
@leave KErrNoMemory
@since 7.0
@param aUTContext The context within which this transition is executing
*/
inline TDefaultLogOutput_Write_TransitionValidator(CUnitTestContext& aUTContext);
/**
@fn ValidatePreConditions()
Intended Usage : Implemented by the developer to check the
end state of the transition behaviour.
Error Condition : Invalid pre-conditions
@since 7.0
@return TBool ETrue if the pre-conditions were valid, EFalse otherwise.
@pre TDefaultLogOutput_Write_TransitionValidator is fully constructed.
@post No change to the iUTContext class.
*/
virtual inline TBool ValidatePreConditions();
/**
@fn ValidatePostConditions(TTestBedAsyncState aAsyncState)
Intended Usage : Implemented by the developer to check the
end state of the transition behaviour.
When overriding, if the transition calls an asynchronous function
ValidatePostConditions will be called twice. Firstly, after the
asynchronous function has been called and, secondly, after the
asynchronous request has completed. The parameter aAsyncState can
be used to distinguish between these two cases.
Error Condition : Invalid post-conditions.
@since 7.0
@param aAsyncState EAsyncCalled if the async function has been just been called,
EAsyncCompleted if the function has completed.
@return TBool ETrue if the post-conditions were valid, EFalse otherwise.
@pre TDefaultLogOutput_Write_TransitionValidator is fully constructed.
@post No change to the iUTContext class.
*/
virtual inline TBool ValidatePostConditions(TTestBedAsyncState aAsyncState);
}; // TDefaultLogOutput_Write_TransitionValidator
#include "DefaultLogOutputTransitionValidation.inl"
#endif // __DEFAULTLOGOUTPUTTRANSITIONVALIDATION_H__