diff -r 000000000000 -r e4d67989cc36 genericopenlibs/cstdlib/LSTDIO/SETVBUF.C
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/genericopenlibs/cstdlib/LSTDIO/SETVBUF.C	Tue Feb 02 02:01:42 2010 +0200
@@ -0,0 +1,199 @@
+/* SETVBUF.C
+ * 
+ * Portions Copyright (c) 1990-2009 Nokia Corporation and/or its subsidiary(-ies).
+ * All rights reserved.
+ */
+
+/*
+ * Copyright (c) 1990 The Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by the University of California, Berkeley.  The name of the
+ * University may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*
+FUNCTION
+<<setvbuf>>---specify file or stream buffering
+
+INDEX
+	setvbuf
+
+ANSI_SYNOPSIS
+	#include <stdio.h>
+	int setvbuf(FILE *<[fp]>, char *<[buf]>,
+	            int <[mode]>, size_t <[size]>);
+
+TRAD_SYNOPSIS
+	#include <stdio.h>
+	int setvbuf(<[fp]>, <[buf]>, <[mode]>, <[size]>)
+	FILE *<[fp]>;
+	char *<[buf]>;
+	int <[mode]>;
+	size_t <[size]>;
+
+DESCRIPTION
+Use <<setvbuf>> to specify what kind of buffering you want for the
+file or stream identified by <[fp]>, by using one of the following
+values (from <<stdio.h>>) as the <[mode]> argument:
+
+o+
+o _IONBF
+Do not use a buffer: send output directly to the host system for the
+file or stream identified by <[fp]>.
+
+o _IOFBF
+Use full output buffering: output will be passed on to the host system
+only when the buffer is full, or when an input operation intervenes.
+
+o _IOLBF
+Use line buffering: pass on output to the host system at every
+newline, as well as when the buffer is full, or when an input
+operation intervenes.
+o-
+
+Use the <[size]> argument to specify how large a buffer you wish.  You
+can supply the buffer itself, if you wish, by passing a pointer to a
+suitable area of memory as <[buf]>.  Otherwise, you may pass <<NULL>>
+as the <[buf]> argument, and <<setvbuf>> will allocate the buffer.
+
+WARNINGS
+You may only use <<setvbuf>> before performing any file operation other
+than opening the file.
+
+If you supply a non-null <[buf]>, you must ensure that the associated
+storage continues to be available until you close the stream
+identified by <[fp]>.
+
+RETURNS
+A <<0>> result indicates success, <<EOF>> failure (invalid <[mode]> or
+<[size]> can cause failure).
+
+PORTABILITY
+Both ANSI C and the System V Interface Definition (Issue 2) require
+<<setvbuf>>. However, they differ on the meaning of a <<NULL>> buffer
+pointer: the SVID issue 2 specification says that a <<NULL>> buffer
+pointer requests unbuffered output.  For maximum portability, avoid
+<<NULL>> buffer pointers.
+
+Both specifications describe the result on failure only as a
+nonzero value.
+
+Supporting OS subroutines required: <<close>>, <<fstat>>, <<isatty>>,
+<<lseek>>, <<read>>, <<sbrk>>, <<write>>.
+*/
+
+#include <stdio_r.h>
+#include <stdlib_r.h>
+#include "LOCAL.H"
+
+/**
+Change stream buffering.
+Changes the buffer to be used for I/O operations with the specified stream.
+Size and mode for the buffer can be specified.
+This function should be called once the file associated with the stream 
+has been opened but before any input or output operation has been done.
+The size of the buffer is specified by the size parameter,
+and can be any value between 2 and 32767 in bytes, 
+this value may be rounded down by some system due to specific alignment.
+buffer can be NULL.
+@return If the buffer is correctly assigned to the file a 0 value is returned.
+On error, a non-zero value is returned. This can be because an invalid type or size has been specified or because an error allocating memory (if NULL buffer was specified).
+@param fp pointer to an open file. 
+@param buf User allocated buffer. Must have at least a size of size bytes. 
+@param mode Specifies a mode for file buffering
+@param Buffer size in bytes, must be more than 0 and less than 32768, this value may be rounded down by some systems due to specific alignment, in which case the minimum value should be 2.
+*/
+EXPORT_C int
+setvbuf (FILE * fp, char *buf, int mode, size_t size)
+{
+  int ret = 0;
+  CHECK_INIT (fp);
+
+  /*
+   * Verify arguments.  The `int' limit on `size' is due to this
+   * particular implementation.
+   */
+
+  if ((mode != _IOFBF && mode != _IOLBF && mode != _IONBF) || (int) size < 0)
+    return (EOF);
+
+  /*
+   * Write current buffer, if any; drop read count, if any.
+   * Make sure putc() will not think fp is line buffered.
+   * Free old buffer if it was from malloc().  Clear line and
+   * non buffer flags, and clear malloc flag.
+   */
+
+  (void) fflush (fp);
+  fp->_r = 0;
+  fp->_lbfsize = 0;
+  if (fp->_flags & __SMBF)
+    _free_r (fp->_data, (void *) fp->_bf._base);
+  fp->_flags &= ~(__SLBF | __SNBF | __SMBF);
+
+  if (mode == _IONBF)
+    goto nbf;
+
+  /*
+   * Allocate buffer if needed. */
+  if (buf == NULL)
+    {
+      if ((buf = (char *)malloc (size)) == NULL)
+	{
+	  ret = EOF;
+	  /* Try another size... */
+	  buf = (char *)malloc (BUFSIZ);
+	}
+      if (buf == NULL)
+	{
+	  /* Can't allocate it, let's try another approach */
+nbf:
+	  fp->_flags |= __SNBF;
+	  fp->_w = 0;
+	  fp->_bf._base = fp->_p = fp->_nbuf;
+	  fp->_bf._size = 1;
+	  return (ret);
+	}
+      fp->_flags |= __SMBF;
+    }
+  /*
+   * Now put back whichever flag is needed, and fix _lbfsize
+   * if line buffered.  Ensure output flush on exit if the
+   * stream will be buffered at all.
+   * Force the buffer to be flushed and hence malloced on first use
+   */
+
+  switch (mode)
+    {
+    case _IOLBF:
+      fp->_flags |= __SLBF;
+      fp->_lbfsize = -(int)size;
+      /* FALLTHROUGH */
+
+    case _IOFBF:
+      /* no flag */
+      fp->_data->__cleanup = _cleanup_r;
+      fp->_bf._base = fp->_p = (unsigned char *) buf;
+      fp->_bf._size = size;
+      break;
+    }
+
+  /*
+   * Patch up write count if necessary.
+   */
+
+  if (fp->_flags & __SWR)
+    fp->_w = fp->_flags & (__SLBF | __SNBF) ? 0 : size;
+
+  return 0;
+}