# HTISerialComm communication plugin configuration file

# The CommPort parameter configures the number of the comm port to use.

# Note that comm port numbering starts from zero, so for example in WINS-

# emulator comm port 0 is physically COM1 in Windows.

# Possible values: 0 - 99

# Default value: 0

#CommPort=0

# The DataRate parameter configures the speed of the serial port (bits/sec)

# Possible values: 2400, 4800, 9600, 19200, 38400, 57600, 115200,

#                  576000, 1152000, 4000000

# Default value: 115200

#DataRate=2400

#DataRate=4800

#DataRate=9600

#DataRate=19200

#DataRate=38400

#DataRate=57600

#DataRate=115200

#DataRate=576000

#DataRate=1152000

#DataRate=4000000

# The Parity parameter configures the parity to be used

# Possible values: none, even, odd, mark, space

# Default value: none

#Parity=none

#Parity=even

#Parity=odd

#Parity=mark

#Parity=space

# The DataBits parameter configures how many data bits to use

# Possible values: 5, 6, 7, 8

# Default value: 8

#DataBits=5

#DataBits=6

#DataBits=7

#DataBits=8

# The StopBits parameter configures how many stop bits to use

# Possible values: 1, 2

# Default value: 1

#StopBits=1

#StopBits=2

# The SendDelay parameter can be used to slow down the data sending from

# Symbian to PC. It defines a delay in milliseconds between each write to

# the serial port. This delay may be needed in some environments when

# larger amounts of data is transferred. If data transfer seems to fail,

# try increasing the SendDelay value.

# The value is defined in milliseconds.

# Default value: 0

#SendDelay=0

# The handshake parameter configures handshaking control bitmask in decimal format

# Possible values:

#

# From d32comm.h :

# DTE

# ---

# KConfigObeyCTS      0x4 = 4

# KConfigObeyDSR     0x10 = 16

# KConfigObeyDCD     0x40 = 64

#

# KConfigFailCTS      0x8 = 8

# KConfigFailDCD     0x80 = 128

# KConfigFailDSR     0x20 = 32

#

# KConfigFreeRTS    0x100 = 256

# KConfigFreeDTR    0x200 = 512

#

# DCE

# ---

# KConfigObeyDTR    0x400 = 1024

# KConfigObeyRTS   0x1000 = 4096

#

# KConfigFailDTR    0x800 = 2048

# KConfigFailRTS   0x2000 = 8192

#

# KConfigFreeDSR   0x4000 = 16384

# KConfigFreeCTS   0x8000 = 32768

# KConfigFreeDCD  0x10000 = 65536

# KConfigFreeRI   0x20000 = 131072

#

# DCD = Data Carrier Detect

# DTR = Data Terminal Ready

# DSR = Data Set Ready

# RTS = Request To Send

# CTS = Clear To Send

#

# For more information about the meaning of the values see Developer Library

#

# Default value: 0

# For cables with partial handshaking

#

# KConfigObeyDSR | KConfigObeyDCD = 0x50

#Handshake=80

# KConfigObeyDSR | KConfigObeyDCD | KConfigObeyDTR = 0x450

#Handshake=1104

# KConfigObeyDSR | KConfigObeyDCD | KConfigFreeDSR | KConfigFreeDCD = 0x14050

#Handshake=82000

# KConfigObeyDSR | KConfigObeyDCD | KConfigFreeDTR | KConfigObeyDTR | KConfigFreeDSR | KConfigFreeDCD = 0x14650

#Handshake=83536

# KConfigObeyCTS | KConfigObeyDSR | KConfigObeyDCD = 0x54

#Handshake=84

# For cables with full handshaking

#

# KConfigObeyCTS | KConfigFreeRTS| KConfigObeyRTS | KConfigFreeCTS

#Handshake=37124