// Copyright (c) 1998-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// Header for the Standard Compression Scheme for Unicode.

// This code is compiled only in the Unicode build.

// 

//

#ifndef __S32UCMP_H__

#define __S32UCMP_H__ 1

#ifdef _UNICODE

#include <e32std.h>

#include <s32mem.h>

/**

 * @publishedAll 

 * @released

 */

class TUnicodeCompressionState

	{

	public:

	TUnicodeCompressionState();

	void Reset();

	static TInt StaticWindowIndex(TUint16 aCode);

	static TInt DynamicWindowOffsetIndex(TUint16 aCode);

	static TUint32 DynamicWindowBase(TInt aOffsetIndex);

	static TBool EncodeAsIs(TUint16 aCode);

	enum TPanic

		{

		EUnhandledByte,			// expander code fails to handle all possible byte codes

		ENotUnicode,			// expander can't handle Unicode values outside range 0x0..0x10FFFF;

								// that is, 16-bit codes plus 32-bit codes that can be expressed using

								// 16-bit surrogates

		EOutputBufferOverflow	// output buffer is not big enough

		};

	static void Panic(TPanic aPanic);

	protected:

	enum

		{

		EStaticWindows = 8,

		EDynamicWindows = 8,

		ESpecialBases = 7

		};

	TBool iUnicodeMode;									// TRUE if in Unicode mode as opposed to single-byte mode

	TUint32 iActiveWindowBase;							// base of the active window - bases are 32-bit because they

														// can be set to the surrogate area, which represents codes

														// from 0x00010000 to 0x0010FFFF - planes 1-16 of ISO-10646.

	static const TUint32 iStaticWindow[EStaticWindows];	// bases of the static windows

	static const TUint32 iDynamicWindowDefault[EDynamicWindows];	// default bases of the dynamic windows

	static const TUint16 iSpecialBase[ESpecialBases];	// bases for window offsets F9..FF

	TUint32 iDynamicWindow[EDynamicWindows];			// bases of the dynamic windows

	TInt iUnicodeWords;									// Unicode words processed; read by compressor, written by expander

	TInt iMaxUnicodeWords;								// maximum number of Unicode words to read or write

	TInt iCompressedBytes;								// compressed bytes processed: read by expander, written by compressor

	TInt iMaxCompressedBytes;							// maximum number of compressed bytes to read or write

	};

/**

 * @publishedAll 

 * @released

 */

class MUnicodeSource

	{

	public:

	virtual TUint16 ReadUnicodeValueL() = 0;

	};

/**

 * @publishedAll 

 * @released

 A class to read Unicode values directly from memory.

 */

class TMemoryUnicodeSource: public MUnicodeSource

	{

	public:

	inline TMemoryUnicodeSource(const TUint16* aPtr);

	inline TUint16 ReadUnicodeValueL();

	private:

	const TUint16* iPtr;

	};

/**

 * @publishedAll 

 * @released

 A class to read Unicode values from a stream built on a memory object.

 */

class TMemoryStreamUnicodeSource: public MUnicodeSource

	{

	public:

	inline TMemoryStreamUnicodeSource(RReadStream& aStream);

	inline TUint16 ReadUnicodeValueL();

	private:

	RReadStream& iStream;

	};

/**

 * @publishedAll 

 * @released

 */

class MUnicodeSink

	{

	public:

	virtual void WriteUnicodeValueL(TUint16 aValue) = 0;

	};

/**

 * @publishedAll 

 * @released

 A class to write Unicode values directly to memory.

 */

class TMemoryUnicodeSink: public MUnicodeSink

	{

	public:

	inline TMemoryUnicodeSink(TUint16* aPtr);

	inline void WriteUnicodeValueL(TUint16 aValue);

	private:

	TUint16* iPtr;

	};

/**

 * @publishedAll 

 * @released

 A class to write Unicode values to a stream built on a memory object.

 */

class TMemoryStreamUnicodeSink: public MUnicodeSink

	{

	public:

	inline TMemoryStreamUnicodeSink(RWriteStream& aStream);

	inline void WriteUnicodeValueL(TUint16 aValue);

	private:

	RWriteStream& iStream;

	};

/**

 * @publishedAll 

 * @released

A class to hold functions to compress text using the Standard Compression Scheme for Unicode.

A note on error handling and leaving.

Although all the public functions except the constructor can leave, it is possible to guarantee success: that is,

guarantee that a call will not leave, and that compression will be completed. To do this, (i) supply a MUnicodeSource

object with a non-leaving ReadUnicodeValueL function, such as a TMemoryUnicodeSource; (ii) write output to a

RWriteStream with a non-leaving WriteL function, or to a buffer that you already know to be big enough, which can be

found out using CompressedSizeL.

This guarantee of success is particularly useful when compressing from one memory buffer to another.

*/

class TUnicodeCompressor: public TUnicodeCompressionState

	{

	public:

	IMPORT_C TUnicodeCompressor();

	IMPORT_C void CompressL(RWriteStream& aOutput,MUnicodeSource& aInput,

							TInt aMaxOutputBytes = KMaxTInt,TInt aMaxInputWords = KMaxTInt,

							TInt* aOutputBytes = NULL,TInt* aInputWords = NULL);

	IMPORT_C void CompressL(TUint8* aOutput,MUnicodeSource& aInput,

							TInt aMaxOutputBytes = KMaxTInt,TInt aMaxInputWords = KMaxTInt,

							TInt* aOutputBytes = NULL,TInt* aInputWords = NULL);

	IMPORT_C TInt FlushL(RWriteStream& aOutput,TInt aMaxOutputBytes,TInt& aOutputBytes);

	IMPORT_C TInt FlushL(TUint8* aOutput,TInt aMaxOutputBytes,TInt& aOutputBytes);

	IMPORT_C static TInt CompressedSizeL(MUnicodeSource& aInput,TInt aInputWords);

	private:

	 // A structure to store a character and its treatment code

	struct TAction

		{

		// Treatment codes: static and dynamic window numbers, plain ASCII or plain Unicode

		enum

			{

			EPlainUnicode = -2,	// character cannot be expressed as ASCII or using static or dynamic windows

			EPlainASCII = -1,	// character can be emitted as an ASCII code

			EFirstDynamic = 0,	// values 0..255 are for dynamic windows with offsets at these places in the offset table

			ELastDynamic = 255,

			EFirstStatic = 256,	// values 256..263 are for static windows 0..7

			ELastStatic = 263

			};

		inline TAction();

		TAction(TUint16 aCode);

		TUint16 iCode;		// Unicode value of the character

		TInt iTreatment;	// treatment code: see above

		};

	void DoCompressL(RWriteStream* aOutputStream,TUint8* aOutputPointer,MUnicodeSource* aInput,

					 TInt aMaxCompressedBytes,TInt aMaxUnicodeWords,

					 TInt* aCompressedBytes,TInt* aUnicodeWords);

	void FlushInputBufferL();

	void FlushOutputBufferL();

	void WriteRunL();

	void WriteCharacter(const TAction& aAction);

	void WriteSCharacter(const TAction& aAction);

	void WriteUCharacter(TUint16 aCode);

	void WriteByte(TUint aByte);

	void WriteCharacterFromBuffer();

	void SelectTreatment(TInt aTreatment);

	enum

		{

		EMaxInputBufferSize = 4,

		EMaxOutputBufferSize = EMaxInputBufferSize * 3	// no Unicode character can be encoded as more than three bytes

		};

	TAction iInputBuffer[EMaxInputBufferSize];			// circular buffer; queue of Unicode characters to be processed

	TInt iInputBufferStart;								// position of first Unicode character to be processed

	TInt iInputBufferSize;								// characters in the input buffer

	TUint8 iOutputBuffer[EMaxOutputBufferSize];			// circular buffer; queue of compressed bytes to be output

	TInt iOutputBufferStart;							// position of first compressed byte to be output

	TInt iOutputBufferSize;								// characters in the output buffer

	TInt iDynamicWindowIndex;							// index of the current dynamic window

	RWriteStream* iOutputStream;						// if non-null, output is to this stream

	TUint8* iOutputPointer;								// if non-null, output is to memory

	MUnicodeSource* iInput;								// input object

	};

/**

 * @publishedAll 

 * @released

A class to hold functions to expand text using the Standard Compression Scheme for Unicode.

A note on error handling and leaving.

Although all the public functions except the constructor can leave, it is possible to guarantee success: that is,

guarantee that a call will not leave, and that expansion will be completed. To do this, (i) supply a MUnicodeSink

object with a non-leaving WriteUnicodeValueL function, such as a TMemoryUnicodeSink; (ii) read input from a RReadStream

with a non-leaving ReadL function; (iii) supply a big enough buffer to write the ouput; you can find out how big by

calling ExpandedSizeL, using methods (i) and (ii) to guarantee success.

This guarantee of success is particularly useful when expanding from one memory buffer to another.

*/

class TUnicodeExpander: public TUnicodeCompressionState

	{

	public:

	IMPORT_C TUnicodeExpander();

	IMPORT_C void ExpandL(MUnicodeSink& aOutput,RReadStream& aInput,

						  TInt aMaxOutputWords = KMaxTInt,TInt aMaxInputBytes = KMaxTInt,

						  TInt* aOutputWords = NULL,TInt* aInputBytes = NULL);

	IMPORT_C void ExpandL(MUnicodeSink& aOutput,const TUint8* aInput,

						  TInt aMaxOutputWords = KMaxTInt,TInt aMaxInputBytes = KMaxTInt,

						  TInt* aOutputWords = NULL,TInt* aInputBytes = NULL);

	IMPORT_C TInt FlushL(MUnicodeSink& aOutput,TInt aMaxOutputWords,TInt& aOutputWords);

	IMPORT_C static TInt ExpandedSizeL(RReadStream& aInput,TInt aInputBytes);

	IMPORT_C static TInt ExpandedSizeL(const TUint8* aInput,TInt aInputBytes);

	private:

	void DoExpandL(MUnicodeSink* aOutput,RReadStream* aInputStream,const TUint8* aInputPointer,

				   TInt aMaxOutputWords,TInt aMaxInputBytes,

				   TInt* aOutputWords,TInt* aInputBytes);

	void HandleByteL();

	void FlushOutputBufferL();

	TBool HandleSByteL(TUint8 aByte);

	TBool HandleUByteL(TUint8 aByte);

	TBool ReadByteL(TUint8& aByte);

	TBool QuoteUnicodeL();

	TBool DefineWindowL(TInt aIndex);

	TBool DefineExpansionWindowL();

	void WriteChar(TText aChar);

	void WriteChar32(TUint aChar);

	enum

		{

		EMaxInputBufferSize = 3,						// no Unicode character can be encoded as more than 3 bytes

		EMaxOutputBufferSize = 2						// no byte can be expanded into more than 2 Unicode characters

		};

	TUint8 iInputBuffer[EMaxInputBufferSize];			// buffer containing a group of compressed bytes representing

														// a single operation; when an input source ends in the

														// middle of an operation, this buffer enables the next

														// expansion to start in the correct state

	TInt iInputBufferStart;								// next read position in the input buffer

	TInt iInputBufferSize;								// bytes in the input buffer

	TUint16 iOutputBuffer[EMaxOutputBufferSize];		// circular buffer; queue of Unicode characters to be output

	TInt iOutputBufferStart;							// position of first Unicode character to be output

	TInt iOutputBufferSize;								// characters in the output buffer

	MUnicodeSink* iOutput;								// output object

	RReadStream* iInputStream;							// if non-null, input is from this stream

	const TUint8* iInputPointer;						// if non-null, input is from memory

	};

// inline functions start here

inline TMemoryUnicodeSource::TMemoryUnicodeSource(const TUint16* aPtr):

	iPtr(aPtr)

	{

	}

inline TUint16 TMemoryUnicodeSource::ReadUnicodeValueL()

	{

	return *iPtr++;

	}

inline TMemoryStreamUnicodeSource::TMemoryStreamUnicodeSource(RReadStream& aStream):

	iStream(aStream)

	{

	}

inline TUint16 TMemoryStreamUnicodeSource::ReadUnicodeValueL()

	{

	TUint16 x;

	iStream.ReadL((TUint8*)&x,sizeof(TUint16));

	return x;

	}

inline TMemoryUnicodeSink::TMemoryUnicodeSink(TUint16* aPtr):

	iPtr(aPtr)

	{

	}

inline void TMemoryUnicodeSink::WriteUnicodeValueL(TUint16 aValue)

	{

	*iPtr++ = aValue;

	}

inline TMemoryStreamUnicodeSink::TMemoryStreamUnicodeSink(RWriteStream& aStream):

	iStream(aStream)

	{

	}

inline void TMemoryStreamUnicodeSink::WriteUnicodeValueL(TUint16 aValue)

	{

	iStream.WriteL((TUint8*)&aValue,sizeof(TUint16));

	}

inline TUnicodeCompressor::TAction::TAction():

	iCode(0),

	iTreatment(EPlainUnicode)

	{

	}

#endif // _UNICODE

#endif // __S32UCMP_H__