/* 
 * tclAsync.c --
 *
 *	This file provides low-level support needed to invoke signal
 *	handlers in a safe way.  The code here doesn't actually handle
 *	signals, though.  This code is based on proposals made by
 *	Mark Diekhans and Don Libes.
 *
 * Copyright (c) 1993 The Regents of the University of California.
 * Copyright (c) 1994 Sun Microsystems, Inc.
 * Portions Copyright (c) 2007-2008 Nokia Corporation and/or its subsidiaries. All rights reserved.  
 * 
 * See the file "license.terms" for information on usage and redistribution
 * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 *
 * RCS: @(#) $Id: tclAsync.c,v 1.6.12.1 2006/07/11 13:18:10 vasiljevic Exp $
 */

#include "tclInt.h"
#include "tclPort.h"
#if defined(__SYMBIAN32__) && defined(__WINSCW__)
#include "tclSymbianGlobals.h"
#define dataKey getdataKey(1)
#endif 

/* Forward declaration */
struct ThreadSpecificData;

/*
 * One of the following structures exists for each asynchronous
 * handler:
 */

typedef struct AsyncHandler {
    int ready;				/* Non-zero means this handler should
					 * be invoked in the next call to
					 * Tcl_AsyncInvoke. */
    struct AsyncHandler *nextPtr;	/* Next in list of all handlers for
					 * the process. */
    Tcl_AsyncProc *proc;		/* Procedure to call when handler
					 * is invoked. */
    ClientData clientData;		/* Value to pass to handler when it
					 * is invoked. */
    struct ThreadSpecificData *originTsd;
					/* Used in Tcl_AsyncMark to modify thread-
					 * specific data from outside the thread
					 * it is associated to. */
    Tcl_ThreadId originThrdId;		/* Origin thread where this token was
					 * created and where it will be
					 * yielded. */
} AsyncHandler;


typedef struct ThreadSpecificData {
    /*
     * The variables below maintain a list of all existing handlers
     * specific to the calling thread.
     */
    AsyncHandler *firstHandler;	    /* First handler defined for process,
				     * or NULL if none. */
    AsyncHandler *lastHandler;	    /* Last handler or NULL. */

    /*
     * The variable below is set to 1 whenever a handler becomes ready and
     * it is cleared to zero whenever Tcl_AsyncInvoke is called.  It can be
     * checked elsewhere in the application by calling Tcl_AsyncReady to see
     * if Tcl_AsyncInvoke should be invoked.
     */

    int asyncReady;

    /*
     * The variable below indicates whether Tcl_AsyncInvoke is currently
     * working.  If so then we won't set asyncReady again until
     * Tcl_AsyncInvoke returns.
     */

    int asyncActive;

    Tcl_Mutex asyncMutex;   /* Thread-specific AsyncHandler linked-list lock */

} ThreadSpecificData;
#if !defined(__SYMBIAN32__) || !defined(__WINSCW__)
static Tcl_ThreadDataKey dataKey;
#endif


/*
 *----------------------------------------------------------------------
 *
 * TclFinalizeAsync --
 *
 *	Finalizes the mutex in the thread local data structure for the
 *	async subsystem.
 *
 * Results:
 *	None.	
 *
 * Side effects:
 *	Forgets knowledge of the mutex should it have been created.
 *
 *----------------------------------------------------------------------
 */

void
TclFinalizeAsync()
{
    ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);

    if (tsdPtr->asyncMutex != NULL) {
	Tcl_MutexFinalize(&tsdPtr->asyncMutex);
    }
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_AsyncCreate --
 *
 *	This procedure creates the data structures for an asynchronous
 *	handler, so that no memory has to be allocated when the handler
 *	is activated.
 *
 * Results:
 *	The return value is a token for the handler, which can be used
 *	to activate it later on.
 *
 * Side effects:
 *	Information about the handler is recorded.
 *
 *----------------------------------------------------------------------
 */

EXPORT_C Tcl_AsyncHandler
Tcl_AsyncCreate(proc, clientData)
    Tcl_AsyncProc *proc;		/* Procedure to call when handler
					 * is invoked. */
    ClientData clientData;		/* Argument to pass to handler. */
{
    AsyncHandler *asyncPtr;
    ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);

    asyncPtr = (AsyncHandler *) ckalloc(sizeof(AsyncHandler));
    asyncPtr->ready = 0;
    asyncPtr->nextPtr = NULL;
    asyncPtr->proc = proc;
    asyncPtr->clientData = clientData;
    asyncPtr->originTsd = tsdPtr;
    asyncPtr->originThrdId = Tcl_GetCurrentThread();

    Tcl_MutexLock(&tsdPtr->asyncMutex);
    if (tsdPtr->firstHandler == NULL) {
	tsdPtr->firstHandler = asyncPtr;
    } else {
	tsdPtr->lastHandler->nextPtr = asyncPtr;
    }
    tsdPtr->lastHandler = asyncPtr;
    Tcl_MutexUnlock(&tsdPtr->asyncMutex);
    return (Tcl_AsyncHandler) asyncPtr;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_AsyncMark --
 *
 *	This procedure is called to request that an asynchronous handler
 *	be invoked as soon as possible.  It's typically called from
 *	an interrupt handler, where it isn't safe to do anything that
 *	depends on or modifies application state.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	The handler gets marked for invocation later.
 *
 *----------------------------------------------------------------------
 */

EXPORT_C void
Tcl_AsyncMark(async)
    Tcl_AsyncHandler async;		/* Token for handler. */
{
    AsyncHandler *token = (AsyncHandler *) async;

    Tcl_MutexLock(&token->originTsd->asyncMutex);
    token->ready = 1;
    if (!token->originTsd->asyncActive) {
	token->originTsd->asyncReady = 1;
	Tcl_ThreadAlert(token->originThrdId);
    }
    Tcl_MutexUnlock(&token->originTsd->asyncMutex);
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_AsyncInvoke --
 *
 *	This procedure is called at a "safe" time at background level
 *	to invoke any active asynchronous handlers.
 *
 * Results:
 *	The return value is a normal Tcl result, which is intended to
 *	replace the code argument as the current completion code for
 *	interp.
 *
 * Side effects:
 *	Depends on the handlers that are active.
 *
 *----------------------------------------------------------------------
 */

EXPORT_C int
Tcl_AsyncInvoke(interp, code)
    Tcl_Interp *interp;			/* If invoked from Tcl_Eval just after
					 * completing a command, points to
					 * interpreter.  Otherwise it is
					 * NULL. */
    int code; 				/* If interp is non-NULL, this gives
					 * completion code from command that
					 * just completed. */
{
    AsyncHandler *asyncPtr;
    ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);

    Tcl_MutexLock(&tsdPtr->asyncMutex);

    if (tsdPtr->asyncReady == 0) {
	Tcl_MutexUnlock(&tsdPtr->asyncMutex);
	return code;
    }
    tsdPtr->asyncReady = 0;
    tsdPtr->asyncActive = 1;
    if (interp == NULL) {
	code = 0;
    }

    /*
     * Make one or more passes over the list of handlers, invoking
     * at most one handler in each pass.  After invoking a handler,
     * go back to the start of the list again so that (a) if a new
     * higher-priority handler gets marked while executing a lower
     * priority handler, we execute the higher-priority handler
     * next, and (b) if a handler gets deleted during the execution
     * of a handler, then the list structure may change so it isn't
     * safe to continue down the list anyway.
     */

    while (1) {
	for (asyncPtr = tsdPtr->firstHandler; asyncPtr != NULL;
		asyncPtr = asyncPtr->nextPtr) {
	    if (asyncPtr->ready) {
		break;
	    }
	}
	if (asyncPtr == NULL) {
	    break;
	}
	asyncPtr->ready = 0;
	Tcl_MutexUnlock(&tsdPtr->asyncMutex);
	code = (*asyncPtr->proc)(asyncPtr->clientData, interp, code);
	Tcl_MutexLock(&tsdPtr->asyncMutex);
    }
    tsdPtr->asyncActive = 0;
    Tcl_MutexUnlock(&tsdPtr->asyncMutex);
    return code;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_AsyncDelete --
 *
 *	Frees up all the state for an asynchronous handler.  The handler
 *	should never be used again.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	The state associated with the handler is deleted.
 *
 *----------------------------------------------------------------------
 */

EXPORT_C void
Tcl_AsyncDelete(async)
    Tcl_AsyncHandler async;		/* Token for handler to delete. */
{
    ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);
    AsyncHandler *asyncPtr = (AsyncHandler *) async;
    AsyncHandler *prevPtr;

    /*
     * Conservatively check the existence of the linked list of
     * registered handlers, as we may come at this point even
     * when the TSD's for the current thread have been already
     * garbage-collected.
     */

    Tcl_MutexLock(&tsdPtr->asyncMutex);
    if (tsdPtr->firstHandler != NULL ) {
	if (tsdPtr->firstHandler == asyncPtr) {
	    tsdPtr->firstHandler = asyncPtr->nextPtr;
	    if (tsdPtr->firstHandler == NULL) {
		tsdPtr->lastHandler = NULL;
	    }
	} else {
	    prevPtr = tsdPtr->firstHandler;
	    while (prevPtr->nextPtr != asyncPtr) {
		prevPtr = prevPtr->nextPtr;
	    }
	    prevPtr->nextPtr = asyncPtr->nextPtr;
	    if (tsdPtr->lastHandler == asyncPtr) {
		tsdPtr->lastHandler = prevPtr;
	    }
	}
    }
    Tcl_MutexUnlock(&tsdPtr->asyncMutex);
    ckfree((char *) asyncPtr);
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_AsyncReady --
 *
 *	This procedure can be used to tell whether Tcl_AsyncInvoke
 *	needs to be called.  This procedure is the external interface
 *	for checking the thread-specific asyncReady variable.
 *
 * Results:
 * 	The return value is 1 whenever a handler is ready and is 0
 *	when no handlers are ready.
 *
 * Side effects:
 *	None.
 *
 *----------------------------------------------------------------------
 */

EXPORT_C int
Tcl_AsyncReady()
{
    ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey);
    return tsdPtr->asyncReady;
}
