// Copyright (c) 2007-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// t_usb tests. 

// Test Steps available

// "StartUsb"				- Initiate Start of USB services

// "WaitForUsb"				- Wait for the bus to re-enumerate

// "StartCSY"				- Ask C32 to load the ACM CSY

// "OpenDTE"				- Open the ACM comm port as a DTE

// "OpenDCE"				- Open the ACM comm port as a DCE

// "Read"				- Post a Read to the comm port

// "Write"				- Post a Write to the comm port

// "CancelRead"				- Cancel a pending Read

// "CancelWrite" 			- Cancel a pending Write

// "WaitForRead"			- Wait for a Read operation to complete

// "WaitForWrite"			- Wait for a Write operation to complete

// "ReadOneOrMore"			- Post a ReadOneOrMore to the comm port

// "ClosePort"				- Close the ACM port

// "CloseCommServer"			- Close the handle to C32

// "CloseUsb"				- Close the handle to the USB server

// "CloseAll"				- Close all handles (port, C32 and USB server)

// "StopUsb"				- Stop USB services

// "NotifySignalChange"			- Post a notify request for when signals change

// "WaitForSignalChange"		- Wait for the signals to change

// "WaitForReadCancel"			- Wait for a read operation to be cancelled completely

// "ReadThenCancel"			- Post a read and then cancel it immediately

// "NotifyConfigChange"			- Post a notify request for when the config changes

// "NotifyBreak"			- Post a notify request for when a break occurs

// "WaitForBreak"			- Wait for a break to occur 

// "SetSignalsToMarkC"			- Set the signals to mark (Requires a configuration file)

// "SetSignalsToSpaceC"			- Set the signals to space (Requires a configuration file) 

// "CheckSignalsC"			- Check the signals match (Requires a configuration file)

// "WaitForReadFailureC"		- Wait for read failure (Requires a configuration file)

// "WaitForWriteFailureC"		- Wait for write failure (Requires a configuration file)

// "OpenPortC"				- Open the ACM port configurable for role, mode and return value

// "WaitForConfigChangeC"		- Wait for the configuration to change

// 

//

LOAD_SUITE t_usb.dll

////////////////////////////////////////

// Test 3 - Check read fails gracefully

// when the cable is unplugged

////////////////////////////////////////

PRINT Please remove USB cable

PAUSE

// Request the USB services are started

RUN_TEST_STEP -1, t_usb, StartUsb

PRINT Please insert USB cable

// Wait for the bus to re-enumerate

RUN_TEST_STEP -1, t_usb, WaitForUsb

// Open the ACM comm port as DTE

RUN_TEST_STEP -1, t_usb, OpenDTE

// Post a read

RUN_TEST_STEP -1, t_usb, Read

PRINT Please remove USB cable

// Check the read fails gracefully

RUN_TEST_STEP -1, t_usb, WaitForReadFailureC, e:\t_usb3.ini

// Close the port

RUN_TEST_STEP -1, t_usb, ClosePort

// Close the rest of the handles

RUN_TEST_STEP -1, t_usb, CloseAll

TEST_COMPLETE 3

UNLOAD