--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/usbdrv/peripheral/pdd/pil/src/ps_usbc.cpp Tue Aug 31 17:01:47 2010 +0300
@@ -0,0 +1,4832 @@
+// Copyright (c) 2000-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of the License "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+// e32/drivers/usbcc/ps_usbc.cpp
+// Platform independent layer (PIL) of the USB Device controller driver (PDD).
+// Interface to the USB LDD.
+//
+//
+
+/**
+ @file ps_usbc.cpp
+ @internalTechnology
+*/
+//#include <drivers/usbc.h>
+#include <usb/usbc.h>
+
+#include "controltransfersm.h"
+/**
+ TUsbcInterfaceSet and TUsbcInterface
+ ====================================
+
+ TUsbcInterfaceSet represents a 'USB Interface' and TUsbcInterface
+ represents an 'Alternate Setting of a USB Interface'.
+
+ Since every LDD governs exactly one interface, the above distinction is
+ made only within the USB implementation. At the LDD API, there is/are
+ simply one or more settings for this single interface, numbered from '0'
+ (the default) to 'n', and specified by the parameter 'TInt aInterfaceNum'.
+
+ Within the PDD implementation, for a TUsbcInterfaceSet number the parameter
+ 'TInt aIfcSet' is used (local variable ifcset); for a TUsbcInterface number
+ the parameter 'TInt aIfc' is used (local variable ifc).
+
+
+ iConfigs[0] and CurrentConfig()
+ ===============================
+
+ One problem with this file is that it always uses iConfigs[0] and not
+ CurrentConfig(). This is mainly because the API to the LDD doesn't know
+ about the concept of multiple configurations, and thus always assumes one
+ single configuration (which is also always active: a further problem).
+
+ In the file chapter9.cpp this issue doesn't exist, since there we always
+ have to obey the USB protocol, and in this way will use the configuration
+ which is selected by the host (which will then again currently always be
+ iConfigs[0].)
+
+ iEp0ClientId
+ ==================================
+
+ The purpose of these two members of class DUsbClientController is the
+ following.
+
+ They are used only during Ep0 control transactions which have an OUT (Rx)
+ data stage. We cannot deduce from the received data itself to whom
+ it is addressed (that's because of the shared nature of Ep0).
+
+ In order to be able to tell whether received Ep0 data is to be processed by
+ the PIL or a LDD, we use iEp0ClientId. iEp0ClientId is usually NULL, which
+ means it is our data. However it is set to the client ID of an LDD in case
+ 2) above. That way we can subsequently hand over received data to the
+ correct client LDD.
+
+ iEp0DataReceived tracks the amount of data already received - it is used to
+ determine the end of the DATA_OUT phase, irrespective of the owner of the
+ data. The total amount that is to be received can be obtained via
+ iConTransferMgr->PktParser().Length(). (iConTransferMgr->PktParser() holds in
+ that case the Setup packet of the current Control transfer.)
+
+ iEp0ClientDataTransmitting is only set to TRUE if a client sets up an Ep0
+ write. After that transmission has completed we use this value to decide
+ whether we have to report the completion to a client or not. (If this
+ variable is FALSE, we did set up the write and thus no client notification
+ is necessary.)
+
+*/
+
+//
+// === Global and Local Variables ==================================================================
+//
+
+// Currently we support at most 2 peripheral stack
+GLDEF_D DUsbClientController* DUsbClientController::UsbClientController[] = {NULL, NULL};
+
+static const TInt KUsbReconnectDelay = 500; // milliseconds
+
+// Charger detector is the guy(PSL) who can detect the charger type and report
+// it via a charger type observer
+static UsbShai::MChargerDetectorIf* gChargerDetector = NULL;
+
+// Charger observer is the guy who want to monitor the chager type event.
+static UsbShai::MChargerDetectorObserverIf* gChargerObsever = NULL;
+
+
+// Those const variables are used to construct the default
+// Usb descriptors, Upper layer can change them later.
+/** Default vendor ID to set in device descriptor */
+static const TUint16 KUsbVendorId = KUsbVendorId_Symbian;
+/** Default product ID to set in device descriptor */
+static const TUint16 KUsbProductId = 0x1111;
+/** Default language ID (US English) to set in device descriptor */
+static const TUint16 KUsbLangId = 0x0409;
+static const TUint8 KUsbNumberOfConfiguration = 0x01;
+/** Default manufacturer string */
+static const wchar_t KStringManufacturer[] = L"Nokia Corporation";
+/** Default product name string */
+static const wchar_t KStringProduct[] = L"Nokia USB Driver";
+/** Default configuration name string */
+static const wchar_t KStringConfig[] = L"Bulk transfer method configuration";
+/** Default configuration name string */
+static const wchar_t KStringSerial[] = L"Serial Not defined";
+
+
+//
+// === USB Controller member function implementations - LDD API (public) ===========================
+//
+
+DECLARE_STANDARD_EXTENSION()//lint !e1717 !e960 defined by symbian
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> Peripheral PIL Extension entry"));
+ // Don't need to do anything here, using extension just to make sure
+ // we're loaded when peripheral PSL trying to register itself to us.
+ __KTRACE_OPT(KUSB, Kern::Printf("< Peripheral PIL Extension exit"));
+ return KErrNone;
+ }
+
+/** The class destructor.
+
+ This rarely gets called, except, for example when something goes
+ wrong during construction.
+
+ It's not exported because it is virtual.
+*/
+DUsbClientController::~DUsbClientController()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::~DUsbClientController()"));
+ if (iPowerHandler)
+ {
+ iPowerHandler->Remove();
+ delete iPowerHandler;
+ }
+
+ // ResetAndDestroy() will call for every array element the destructor of the pointed-to object,
+ // before deleting the element itself, and closing the array.
+ iConfigs.ResetAndDestroy();
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::~DUsbClientController(): Done."));
+ }
+
+EXPORT_C DUsbClientController* DUsbClientController::Create(UsbShai::MPeripheralControllerIf& aPeripheralControllerIf,
+ const UsbShai::TPeripheralControllerProperties& aProperties,
+ TBool aIsOtgPort)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::Create"));
+ // Attempt to create the object
+ DUsbClientController* usbcc = new DUsbClientController(aPeripheralControllerIf,
+ aProperties,
+ aIsOtgPort);
+
+ __ASSERT_DEBUG( (usbcc != NULL), Kern::Fault( " USB PSL Out of memory, DUsbClientController", __LINE__ ) );
+
+ if (usbcc != NULL)
+ {
+ // Second phase constructor
+ TInt err = usbcc->Construct();
+ __ASSERT_DEBUG( (err == KErrNone), Kern::Fault( "DUsbClientController::Construct failed", err) );
+
+ if (err != KErrNone)
+ {
+ delete usbcc;
+ usbcc = NULL;
+ }
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::Create instance = %d",usbcc));
+
+ return usbcc;
+ }
+
+/**
+ * FIXME: This function used to be called by the dummy DCD to disable
+ * the peripheral stack. It has been deprecated and we currently use
+ * DisablePeripheralStack() to achieve the same effect.
+ */
+EXPORT_C void DUsbClientController::DisableClientStack()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("CALL TO OBSOLETE FUNCTION: DUsbClientController::DisableClientStack()"));
+ }
+
+
+/**
+ * FIXME: This function used to be called by the dummy DCD to enable
+ * the peripheral stack. It has been deprecated and we currently use
+ * EnablePeripheralStack() to achieve the same effect.
+ */
+EXPORT_C void DUsbClientController::EnableClientStack()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("CALL TO OBSOLETE FUNCTION: DUsbClientController::EnableClientStack()"));
+ }
+
+
+/** Called by LDD to see if controller is usable.
+
+ @return ETrue if controller is in normal state, EFalse if it is disabled.
+*/
+EXPORT_C TBool DUsbClientController::IsActive()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::IsActive = %d",iStackIsActive));
+ return iStackIsActive;
+ }
+
+
+/** Called by LDD to register client callbacks.
+
+ @return KErrNone if successful, KErrAlreadyExists callback exists.
+*/
+EXPORT_C TInt DUsbClientController::RegisterClientCallback(TUsbcClientCallback& aCallback)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::RegisterClientCallback()"));
+ if (iClientCallbacks.Elements() == KUsbcMaxListLength)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Maximum list length reached: %d",
+ KUsbcMaxListLength));
+ return KErrGeneral;
+ }
+ TSglQueIter<TUsbcClientCallback> iter(iClientCallbacks);
+ TUsbcClientCallback* p;
+ while ((p = iter++) != NULL)
+ if (p == &aCallback)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Error: ClientCallback @ 0x%x already registered", &aCallback));
+ return KErrAlreadyExists;
+ }
+ iClientCallbacks.AddLast(aCallback);
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::RegisterClientCallback()"));
+ return KErrNone;
+ }
+
+
+/** Returns a pointer to the USB client controller object.
+
+ This function is static.
+
+ @param aUdc The number of the UDC (0..n) for which the pointer is to be returned.
+
+ @return A pointer to the USB client controller object.
+*/
+EXPORT_C DUsbClientController* DUsbClientController::UsbcControllerPointer(TInt aUdc)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::UsbcControllerPointer()"));
+
+ if (aUdc < 0 || aUdc > 1)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: aUdc out of range (%d)", aUdc));
+ return NULL;
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::UsbcControllerPointer()"));
+
+ return UsbClientController[aUdc];
+ }
+
+
+/** Fills the buffer passed in as an argument with endpoint capability information.
+
+ @see DUsbClientController::DeviceCaps()
+ @see TUsbcEndpointData
+ @see TUsbDeviceCaps
+
+ @param aClientId A pointer to the LDD making the enquiry.
+ @param aCapsBuf A reference to a descriptor buffer, which, on return, contains an array of
+ TUsbcEndpointData elements; there are TUsbDeviceCaps::iTotalEndpoints elements in the array;
+ call DeviceCaps() to get the number of elements required.
+*/
+EXPORT_C void DUsbClientController::EndpointCaps(const DBase* aClientId, TDes8& aCapsBuf) const
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::EndpointCaps()"));
+ // Here we do not simply call DUsbClientController::DeviceEndpointCaps(),
+ // because that function fills an array which comprises of _all_ endpoints,
+ // whereas this function omits ep0 and all unusable endpoints.
+ // Apart from that, we have to fill an array of TUsbcEndpointData, not TUsbcEndpointCaps.
+ TUsbcEndpointData data[KUsbcMaxEndpoints];
+ const TInt ifcset_num = ClientId2InterfaceNumber(aClientId);
+ for (TInt i = 2, j = 0; i < iDeviceTotalEndpoints; ++i)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" DUsbClientController::Caps: RealEndpoint #%d", i));
+ if (iRealEndpoints[i].iCaps.iTypesAndDir != UsbShai::KUsbEpNotAvailable)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" DUsbClientController::Caps: --> UsableEndpoint #%d", j));
+
+ data[j].iCaps.iSizes = iRealEndpoints[i].iCaps.iSizes;
+ data[j].iCaps.iTypesAndDir = iRealEndpoints[i].iCaps.iTypesAndDir;
+ data[j].iCaps.iHighBandwidth = iRealEndpoints[i].iCaps.iHighBandwidth;
+ data[j].iCaps.iReserved[0] = iRealEndpoints[i].iCaps.iReserved[0];
+ data[j].iCaps.iReserved[1] = iRealEndpoints[i].iCaps.iReserved[1];
+
+ if (ifcset_num < 0)
+ {
+ // If this LDD doesn't own an interface, but the Ep points to one,
+ // then that must be the interface of a different LDD. Hence the Ep
+ // is not available for this LDD.
+ data[j].iInUse = (iRealEndpoints[i].iIfcNumber != NULL);
+ }
+ else
+ {
+ // If this LDD does already own an interface, and the Ep also points to one,
+ // then the Ep is not available for this LDD only if that interface is owned
+ // by a different LDD (i.e. if the interface number is different).
+ // Reason: Even though the endpoint might already be part of an interface setting,
+ // it is still available for a different alternate setting of the same interface.
+ data[j].iInUse = ((iRealEndpoints[i].iIfcNumber != NULL) &&
+ (*(iRealEndpoints[i].iIfcNumber) != ifcset_num));
+ }
+
+ j++;
+ }
+ }
+ // aCapsBuf resides in userland
+ TPtrC8 des((TUint8*)data, sizeof(data));
+ const TInt r = Kern::ThreadDesWrite((reinterpret_cast<const DLddUsbcChannel*>(aClientId))->Client(),
+ &aCapsBuf, des, 0, KChunkShiftBy0, NULL);
+ if (r != KErrNone)
+ {
+ Kern::ThreadKill((reinterpret_cast<const DLddUsbcChannel*>(aClientId))->Client(),
+ EExitPanic, r, KUsbPILKillCat);
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::EndpointCaps()"));
+ }
+
+
+/** Fills the buffer passed in as an argument with device capability information.
+
+ @see TUsbDeviceCaps
+ @see TUsbDeviceCapsV01
+
+ @param aClientId A pointer to the LDD making the enquiry.
+ @param aCapsBuf A reference to a descriptor buffer which, on return, contains
+ a TUsbDeviceCaps structure.
+*/
+EXPORT_C void DUsbClientController::DeviceCaps(const DBase* aClientId, TDes8& aCapsBuf) const
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::DeviceCaps()"));
+ TUsbDeviceCaps caps;
+ caps().iTotalEndpoints = iDeviceUsableEndpoints; // not DeviceTotalEndpoints()!
+
+ caps().iSelfPowered = iSelfPowered;
+ caps().iRemoteWakeup = iRemoteWakeup;
+ caps().iHighSpeed = (iControllerProperties.iControllerCaps & UsbShai::KDevCapHighSpeed)?ETrue:EFalse;
+
+ // PIL always assume controller support this caps, see explaination in peripheral shai header
+ caps().iFeatureWord1 = caps().iFeatureWord1 | KUsbDevCapsFeatureWord1_CableDetectWithoutPower;
+
+ caps().iFeatureWord1 = caps().iFeatureWord1 | KUsbDevCapsFeatureWord1_EndpointResourceAllocV2;
+ caps().iReserved = 0;
+
+ // aCapsBuf resides in userland
+ const TInt r = Kern::ThreadDesWrite((reinterpret_cast<const DLddUsbcChannel*>(aClientId))->Client(),
+ &aCapsBuf, caps, 0, KChunkShiftBy0, NULL);
+ if (r != KErrNone)
+ {
+ Kern::ThreadKill((reinterpret_cast<const DLddUsbcChannel*>(aClientId))->Client(),
+ EExitPanic, r, KUsbPILKillCat);
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::DeviceCaps()"));
+ }
+
+
+TUsbcEndpointInfoArray::TUsbcEndpointInfoArray(const TUsbcEndpointInfo* aData, TInt aDataSize)
+ {
+ iType = EUsbcEndpointInfo;
+ iData = (TUint8*) aData;
+ if (aDataSize > 0)
+ iDataSize = aDataSize;
+ else
+ iDataSize = sizeof(TUsbcEndpointInfo);
+ }
+
+
+inline TUsbcEndpointInfo& TUsbcEndpointInfoArray::operator[](TInt aIndex) const
+ {
+ return *(TUsbcEndpointInfo*) &iData[aIndex * iDataSize];
+ }
+
+
+EXPORT_C TInt DUsbClientController::SetInterface(const DBase* aClientId, DThread* aThread,
+ TInt aInterfaceNum, TUsbcClassInfo& aClass,
+ TDesC8* aString, TInt aTotalEndpointsUsed,
+ const TUsbcEndpointInfo aEndpointData[],
+ TInt (*aRealEpNumbers)[6], TUint32 aFeatureWord)
+ {
+ TUsbcEndpointInfoArray endpointData = TUsbcEndpointInfoArray(aEndpointData);
+ return SetInterface(aClientId, aThread, aInterfaceNum, aClass, aString, aTotalEndpointsUsed,
+ endpointData, (TInt*) aRealEpNumbers, aFeatureWord);
+ }
+
+
+/** Creates a new USB interface (one setting), complete with endpoints, descriptors, etc.,
+ and chains it into the internal device configuration tree.
+
+ @param aClientId A pointer to the LDD owning the new interface.
+ @param aThread A pointer to the thread the owning LDD is running in.
+ @param aInterfaceNum The interface setting number of the new interface setting. This must be 0
+ if it is the first setting of the interface that gets created, or 1 more than the last setting
+ that was created for this interface.
+ @param aClass Contains information about the device class this interface might belong to.
+ @param aString A pointer to a string that is used for the string descriptor of this interface.
+ @param aTotalEndpointsUsed The number of endpoints used by this interface (and also the number of
+ elements of the following array).
+ @param aEndpointData An array with aTotalEndpointsUsed elements, containing information about the
+ endpoints of this interface.
+
+ @return KErrNotSupported if Control endpoints are requested by the LDD but aren't supported by the PIL,
+ KErrInUse if at least one requested endpoint is - temporarily or permanently - not available for use,
+ KErrNoMemory if (endpoint, interface, string) descriptor allocation fails, KErrGeneral if something else
+ goes wrong during endpoint or interface or descriptor creation, KErrNone if interface successfully set up.
+*/
+EXPORT_C TInt DUsbClientController::SetInterface(const DBase* aClientId, DThread* aThread,
+ TInt aInterfaceNum, TUsbcClassInfo& aClass,
+ TDesC8* aString, TInt aTotalEndpointsUsed,
+ const TUsbcEndpointInfoArray aEndpointData,
+ TInt aRealEpNumbers[], TUint32 aFeatureWord)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::SetInterface()"));
+ if (aInterfaceNum != 0)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" alternate interface setting request: #%d", aInterfaceNum));
+ }
+
+#ifndef USB_SUPPORTS_CONTROLENDPOINTS
+ for (TInt i = 0; i < aTotalEndpointsUsed; ++i)
+ {
+ if (aEndpointData[i].iType == UsbShai::KUsbEpTypeControl)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: control endpoints not supported"));
+ return KErrNotSupported;
+ }
+ }
+#endif
+
+ // Check for endpoint availability & check those endpoint's capabilities
+ const TInt ifcset_num = ClientId2InterfaceNumber(aClientId);
+
+ // The passed-in ifcset_num may be -1 now, but that's intended.
+ if (!CheckEpAvailability(aTotalEndpointsUsed, aEndpointData, ifcset_num))
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: endpoints not (all) available"));
+ return KErrInUse;
+ }
+
+ // Create & setup new interface
+ TUsbcInterface* ifc = CreateInterface(aClientId, aInterfaceNum, aFeatureWord);
+ if (ifc == NULL)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: ifc == NULL"));
+ return KErrGeneral;
+ }
+
+ // Create logical endpoints
+ TInt r = CreateEndpoints(ifc, aTotalEndpointsUsed, aEndpointData, aRealEpNumbers);
+ if (r != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: CreateEndpoints() err = %d ",r));
+ DeleteInterface(ifc->iInterfaceSet->iInterfaceNumber, aInterfaceNum);
+ return r;
+ }
+
+ // Create & setup interface, string, and endpoint descriptors
+ r = SetupIfcDescriptor(ifc, aClass, aThread, aString, aEndpointData);
+ if (r != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: SetupIfcDescriptor() err = %d",r));
+ return r;
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::SetInterface()"));
+ return KErrNone;
+ }
+
+
+/** Releases an existing USB interface (one setting), complete with endpoints, descriptors, etc.,
+ and removes it from the internal device configuration tree.
+
+ @param aClientId A pointer to the LDD owning the interface.
+ @param aInterfaceNum The setting number of the interface setting to be deleted. This must be
+ the highest numbered (or 'last') setting for this interface.
+
+ @return KErrNotFound if interface (not setting) for some reason cannot be found, KErrArgument if an
+ invalid interface setting number is specified (not existing or existing but too small), KErrNone if
+ interface successfully released or if this client doesn't own any interface.
+*/
+EXPORT_C TInt DUsbClientController::ReleaseInterface(const DBase* aClientId, TInt aInterfaceNum)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::ReleaseInterface(..., %d)", aInterfaceNum));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" interface not found")); // no error
+ return KErrNone;
+ }
+ TUsbcInterfaceSet* const ifcset_ptr = InterfaceNumber2InterfacePointer(ifcset);
+ if (!ifcset_ptr)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Error: interface number %d doesn't exist", ifcset));
+ return KErrNotFound;
+ }
+ const TInt setting_count = ifcset_ptr->iInterfaces.Count();
+ if ((setting_count - 1) != aInterfaceNum)
+ {
+ __KTRACE_OPT(KUSB,
+ Kern::Printf(" Error: interface settings must be released in descending order:\n\r"
+ " %d setting(s) exist, #%d was requested to be released.\n\r"
+ " (#%d has to be released first)",
+ setting_count, aInterfaceNum, setting_count - 1));
+ return KErrArgument;
+ }
+ // Tear down current setting (invalidate configured state)
+ __KTRACE_OPT(KUSB, Kern::Printf(" tearing down InterfaceSet %d", ifcset));
+ // Cancel all transfers on the current setting of this interface and deconfigure all its endpoints.
+ InterfaceSetTeardown(ifcset_ptr);
+ // 'Setting 0' means: delete all existing settings.
+ if (aInterfaceNum == 0)
+ {
+ TInt m = ifcset_ptr->iInterfaces.Count();
+ while (m > 0)
+ {
+ m--;
+ // Ground the physical endpoints' logical_endpoint_pointers
+ const TInt n = ifcset_ptr->iInterfaces[m]->iEndpoints.Count();
+ for (TInt i = 0; i < n; ++i)
+ {
+ TUsbcPhysicalEndpoint* ptr = const_cast<TUsbcPhysicalEndpoint*>
+ (ifcset_ptr->iInterfaces[m]->iEndpoints[i]->iPEndpoint);
+ ptr->iLEndpoint = NULL;
+ }
+ // Delete the setting itself + its ifc & ep descriptors
+ DeleteInterface(ifcset, m);
+ iDescriptors.DeleteIfcDescriptor(ifcset, m);
+ }
+ }
+ else
+ {
+ // Ground the physical endpoints' logical_endpoint_pointers
+ const TInt n = ifcset_ptr->iInterfaces[aInterfaceNum]->iEndpoints.Count();
+ for (TInt i = 0; i < n; ++i)
+ {
+ TUsbcPhysicalEndpoint* ptr = const_cast<TUsbcPhysicalEndpoint*>
+ (ifcset_ptr->iInterfaces[aInterfaceNum]->iEndpoints[i]->iPEndpoint);
+ ptr->iLEndpoint = NULL;
+ }
+ // Delete the setting itself + its ifc & ep descriptors
+ DeleteInterface(ifcset, aInterfaceNum);
+ iDescriptors.DeleteIfcDescriptor(ifcset, aInterfaceNum);
+ }
+ // Delete the whole interface if all settings are gone
+ if (ifcset_ptr->iInterfaces.Count() == 0)
+ {
+ DeleteInterfaceSet(ifcset);
+ }
+ // We now no longer have a valid current configuration
+ iCurrentConfig = 0;
+ if (iDeviceState == UsbShai::EUsbPeripheralStateConfigured)
+ {
+ NextDeviceState(UsbShai::EUsbPeripheralStateAddress);
+ }
+ // If it was the last interface(set)...
+ if (iConfigs[0]->iInterfaceSets.Count() == 0)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" No ifc left -> turning off UDC"));
+ // First disconnect the device from the bus
+ UsbDisconnect();
+ DeActivateHardwareController();
+ // (this also disables endpoint zero; we cannot have a USB device w/o interface, see 9.6.3)
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::ReleaseInterface"));
+ return KErrNone;
+ }
+
+
+/** Enforces a USB re-enumeration by disconnecting the UDC from the bus (if it is currently connected) and
+ re-connecting it.
+
+ This only works if the PSL supports it, i.e. if SoftConnectCaps() returns ETrue.
+*/
+EXPORT_C TInt DUsbClientController::ReEnumerate()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::ReEnumerate()"));
+
+ // ReEnumerate is possible only when stack is enabled
+ if (!iStackIsActive)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Client stack disabled -> returning here"));
+ return KErrNotReady;
+ }
+
+ // If no interfaces setup, there is no point to reenumerate
+ if (iConfigs[0]->iInterfaceSets.Count() == 0)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" > No interface registered -> no need to re-enumerate"));
+ return KErrNone;;
+ }
+
+ if (!iHardwareActivated)
+ {
+ // If the UDC is still off, we switch it on here.
+ const TInt r = ActivateHardwareController();
+ if (r != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: ActivateHardwareController() failed: %d", r));
+ return r;
+ }
+
+ // Finally connect the device to the bus
+ UsbConnect();
+ }
+ else
+ {
+ UsbDisconnect();
+
+ // Now we have to wait a certain amount of time, in order to give the host the opportunity
+ // to come to terms with the new situation.
+ // (The ETrue parameter makes the callback get called in DFC instead of in ISR context.)
+ iReconnectTimer.OneShot(KUsbReconnectDelay, ETrue);
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::ReEnumerate()"));
+ return KErrNone;;
+ }
+
+
+/** Powers up the UDC if one or more interfaces exist.
+
+ @return KErrNone if UDC successfully powered up, KErrNotReady if no
+ interfaces have been registered yet, KErrHardwareNotAvailable if UDC
+ couldn't be activated.
+*/
+EXPORT_C TInt DUsbClientController::PowerUpUdc()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::PowerUpUdc()"));
+
+ // we need to check whether Stack is activate or not(can be done by otg sw in otg setup
+ // or by vBus risen/fallen event in a non-otg env)
+ if (!iStackIsActive)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Client stack disabled -> returning here"));
+ return KErrNotReady;
+ }
+
+ if (iConfigs[0]->iInterfaceSets.Count() == 0)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" No interface registered -> won't power up UDC"));
+ return KErrNotReady;
+ }
+
+ // If the UDC is still off, we switch it on here.
+ const TInt r = ActivateHardwareController();
+ if (r != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: ActivateHardwareController() failed: %d", r));
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::PowerUpUdc() returns %d",r));
+ return r;
+ }
+
+
+/** Connects the UDC to the bus.
+
+ @return KErrNone if UDC successfully connected,
+ KErrNotSupported if KDevCapSoftConnect not supported
+ KErrGeneral if there was an error.
+
+*/
+EXPORT_C TInt DUsbClientController::UsbConnect()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::UsbConnect()"));
+ iClientSupportReady = ETrue;
+
+ // If a deferred reset is pending, service it now
+ const TInt irq = __SPIN_LOCK_IRQSAVE(iUsbLock);
+ if (iUsbResetDeferred)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Resetting USB Reset 'defer' flag"));
+ iUsbResetDeferred = EFalse;
+ (void) ProcessResetEvent(EFalse);
+ }
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+
+ // Indicate readiness to connect to the PSL
+ const TInt r = iController.PeripheralConnect();
+
+ // Check whether Stack is activated by OTG controller
+ // or Vbus Risen had been detected.
+ // If either of them is true and HW is not activated yet, do it here.
+ if (iStackIsActive && !iHardwareActivated )
+ {
+ // PowerUpUdc only do Activating Hardware when there are at least 1
+ // Iterface registered
+ PowerUpUdc();
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::UsbConnect()"));
+ return r;
+ }
+
+
+/** Disconnects the UDC from the bus.
+
+ This only works if the PSL supports it, i.e. if SoftConnectCaps() returns ETrue.
+
+ @return KErrNone if UDC successfully disconnected, KErrGeneral if there was an error.
+*/
+EXPORT_C TInt DUsbClientController::UsbDisconnect()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::UsbDisconnect()"));
+ iClientSupportReady = EFalse;
+
+ // Indicate to PSL that we are no longer ready to connect
+ const TInt r = iController.PeripheralDisconnect();
+
+ // There won't be any notification by the PSL about this,
+ // so we have to notify the LDD/user ourselves:
+ if ((r == KErrNone) && (iDeviceState != UsbShai::EUsbPeripheralStateUndefined))
+ {
+ // Not being in state UNDEFINED implies that the cable is inserted.
+ if (iHardwareActivated)
+ {
+ NextDeviceState(UsbShai::EUsbPeripheralStatePowered);
+ }
+ // (If the hardware is NOT activated at this point, we can only be in
+ // state UsbShai::EUsbPeripheralStateAttached, so we don't have to move to it.)
+ }
+ return r;
+ }
+
+
+/** Registers a notification callback for changes of the USB device state.
+
+ In the event of a device state change, the callback's state member gets updated (using SetState) with a
+ new UsbShai::TUsbPeripheralState value, and then the callback is executed (DoCallback). 'USB device state' here refers
+ to the Visible Device States as defined in chapter 9 of the USB specification.
+
+ @param aCallback A reference to a properly filled in status callback structure.
+
+ @return KErrNone if callback successfully registered, KErrGeneral if this callback is already registered
+ (it won't be registered twice).
+*/
+EXPORT_C TInt DUsbClientController::RegisterForStatusChange(TUsbcStatusCallback& aCallback)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::RegisterForStatusChange()"));
+ if (iStatusCallbacks.Elements() == KUsbcMaxListLength)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Maximum list length reached: %d",
+ KUsbcMaxListLength));
+ return KErrGeneral;
+ }
+ if (IsInTheStatusList(aCallback))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Error: StatusCallback @ 0x%x already registered", &aCallback));
+ return KErrGeneral;
+ }
+ const TInt irq = __SPIN_LOCK_IRQSAVE(iUsbLock);
+ iStatusCallbacks.AddLast(aCallback);
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ return KErrNone;
+ }
+
+
+/** De-registers (removes from the list of pending requests) a notification callback for the USB device
+ status.
+
+ @param aClientId A pointer to the LDD owning the status change callback.
+
+ @return KErrNone if callback successfully unregistered, KErrNotFound if the callback couldn't be found.
+*/
+EXPORT_C TInt DUsbClientController::DeRegisterForStatusChange(const DBase* aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeRegisterForStatusChange()"));
+ __ASSERT_DEBUG((aClientId != NULL), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ const TInt irq = __SPIN_LOCK_IRQSAVE(iUsbLock);
+ TSglQueIter<TUsbcStatusCallback> iter(iStatusCallbacks);
+ TUsbcStatusCallback* p;
+ while ((p = iter++) != NULL)
+ {
+ if (p->Owner() == aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" removing StatusCallback @ 0x%x", p));
+ iStatusCallbacks.Remove(*p);
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ return KErrNone;
+ }
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf(" client not found"));
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ return KErrNotFound;
+ }
+
+
+/** Registers a notification callback for changes of the state of endpoints.
+
+ In the event of a state change of an endpoint that is spart of an interface which is owned by the LDD
+ specified in the callback structure, the callback's state member gets updated (using SetState) with a new
+ value, and the callback is executed (DoCallback). 'Endpoint state' here refers to the state of the
+ ENDPOINT_HALT feature of an endpoint as described in chapter 9 of the USB specification. The contents of
+ the state variable reflects the state of the halt features for all endpoints of the current interface
+ setting: bit 0 represents endpoint 1, bit 1 endpoint 2, etc. A set bit means 'endpoint halted', a cleared
+ bit 'endpoint not halted'.
+
+ @param aCallback A reference to a properly filled in endpoint status callback structure.
+
+ @return KErrNone if callback successfully registered, KErrGeneral if this callback is already registered
+ (it won't be registered twice).
+*/
+EXPORT_C TInt DUsbClientController::RegisterForEndpointStatusChange(TUsbcEndpointStatusCallback& aCallback)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::RegisterForEndpointStatusChange()"));
+ if (iEpStatusCallbacks.Elements() == KUsbcMaxListLength)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Maximum list length reached: %d",
+ KUsbcMaxListLength));
+ return KErrGeneral;
+ }
+ if (IsInTheEpStatusList(aCallback))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Error: EpStatusCallback @ 0x%x already registered", &aCallback));
+ return KErrGeneral;
+ }
+ const TInt irq = __SPIN_LOCK_IRQSAVE(iUsbLock);
+ iEpStatusCallbacks.AddLast(aCallback);
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ return KErrNone;
+ }
+
+
+/** De-registers (removes from the list of pending requests) a notification callback for changes of the state
+ of endpoints.
+
+ @param aClientId A pointer to the LDD owning the endpoint status change callback.
+
+ @return KErrNone if callback successfully unregistered, KErrNotFound if the callback couldn't be found.
+*/
+EXPORT_C TInt DUsbClientController::DeRegisterForEndpointStatusChange(const DBase* aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeRegisterForEndpointStatusChange()"));
+ __ASSERT_DEBUG((aClientId != NULL), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ const TInt irq = __SPIN_LOCK_IRQSAVE(iUsbLock);
+ TSglQueIter<TUsbcEndpointStatusCallback> iter(iEpStatusCallbacks);
+ TUsbcEndpointStatusCallback* p;
+ while ((p = iter++) != NULL)
+ {
+ if (p->Owner() == aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" removing EpStatusCallback @ 0x%x", p));
+ iEpStatusCallbacks.Remove(*p);
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ return KErrNone;
+ }
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf(" client not found"));
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ return KErrNotFound;
+ }
+
+
+/** Returns the number of the currently active alternate interface setting for this interface.
+
+ @param aClientId A pointer to the LDD owning the interface.
+ @param aInterfaceNum Here the interface gets written to.
+
+ @return KErrNotFound if an interface for this client couldn't be found, KErrNone if setting value was
+ successfully written.
+*/
+EXPORT_C TInt DUsbClientController::GetInterfaceNumber(const DBase* aClientId, TInt& aInterfaceNum) const
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetInterfaceNumber()"));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error (ifc < 0)"));
+ return KErrNotFound;
+ }
+ const TUsbcInterfaceSet* const ifcset_ptr = InterfaceNumber2InterfacePointer(ifcset);
+ if (!ifcset_ptr)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: interface number %d doesn't exist", ifcset));
+ return KErrNotFound;
+ }
+ aInterfaceNum = ifcset_ptr->iCurrentInterface;
+ return KErrNone;
+ }
+
+
+/** This is normally called once by an LDD's destructor, either after a Close() on the user side,
+ or during general cleanup.
+
+ It might also be called by the LDD when some internal unrecoverable error occurs.
+
+ This function
+ - de-registers a possibly pending device state change notification request,
+ - de-registers a possibly pending endpoint state change notification request,
+ - releases all interfaces + settings owned by this LDD,
+ - cancels all remaining (if any) read/write requests.
+
+ @param aClientId A pointer to the LDD to be unregistered.
+
+ @return KErrNone.
+*/
+EXPORT_C TInt DUsbClientController::DeRegisterClient(const DBase* aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeRegisterClient(0x%x)", aClientId));
+ // Cancel all device state notification requests
+ DeRegisterForStatusChange(aClientId);
+ // Cancel all endpoint state notification requests
+ DeRegisterForEndpointStatusChange(aClientId);
+ DeRegisterForOtgFeatureChange(aClientId);
+ DeRegisterClientCallback(aClientId);
+ // Delete the interface including all its alternate settings which might exist.
+ // (If we release the default setting (0), all alternate settings are deleted as well.)
+ const TInt r = ReleaseInterface(aClientId, 0);
+ // Cancel all remaining (if any) read/write requests
+ DeleteRequestCallbacks(aClientId);
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeRegisterClient: Done."));
+ return r;
+ }
+
+
+/** Returns the currently used Ep0 max packet size.
+
+ @return The currently used Ep0 max packet size.
+*/
+EXPORT_C TInt DUsbClientController::Ep0PacketSize() const
+ {
+ const TUsbcLogicalEndpoint* const ep = iRealEndpoints[0].iLEndpoint;
+ if (iHighSpeed)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Ep0 size = %d (HS)", ep->iEpSize_Hs));
+ return ep->iEpSize_Hs;
+ }
+ else
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Ep0 size = %d (FS)", ep->iEpSize_Fs));
+ return ep->iEpSize_Fs;
+ }
+ }
+
+
+/** Stalls Ep0.
+
+ @param aClientId A pointer to the LDD wishing to stall Ep0 (this is for PIL internal purposes only).
+
+ @return KErrNone if endpoint zero successfully stalled, KErrGeneral otherwise.
+*/
+EXPORT_C TInt DUsbClientController::Ep0Stall(const DBase* aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::Ep0Stall()"));
+ if (aClientId == iEp0ClientId)
+ {
+ ResetEp0DataOutVars();
+ }
+ const TInt err = iConTransferMgr->StallEndpoint(KEp0_Out);
+ if (err < 0)
+ {
+ return err;
+ }
+ else
+ return iConTransferMgr->StallEndpoint(KEp0_In);
+ }
+
+
+/** Sends a zero-byte status packet on Ep0.
+
+ @param aClientId A pointer to the LDD wishing to send the status packet (not used at present).
+*/
+EXPORT_C void DUsbClientController::SendEp0StatusPacket(const DBase* /* aClientId */)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SendEp0StatusPacket()"));
+ iConTransferMgr->SendEp0ZeroByteStatusPacket();
+ }
+
+
+/** Returns the current USB device state.
+
+ 'USB device state' here refers to the Visible Device States as defined in chapter 9 of the USB
+ specification.
+
+ @return The current USB device state, or UsbShai::EUsbPeripheralStateUndefined
+*/
+EXPORT_C UsbShai::TUsbPeripheralState DUsbClientController::GetDeviceStatus() const
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetDeviceStatus()"));
+ return iDeviceState;
+ }
+
+
+/** Returns the state of an endpoint.
+
+ 'Endpoint state' here refers to the state of the ENDPOINT_HALT feature of
+ an endpoint as described in chapter 9 of the USB specification.
+
+ @param aClientId A pointer to the LDD owning the interface which contains the endpoint to be queried.
+ @param aEndpointNum The number of the endpoint to be queried.
+
+ @return The current endpoint state, or EEndpointStateUnknown if the endpoint couldn't be found.
+*/
+EXPORT_C TEndpointState DUsbClientController::GetEndpointStatus(const DBase* aClientId, TInt aEndpointNum) const
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::GetEndpointStatus()"));
+
+ TEndpointState ret = (iRealEndpoints[aEndpointNum].iHalt)?EEndpointStateStalled : EEndpointStateNotStalled;
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::GetEndpointStatus() %d",ret));
+
+ return ret;
+ }
+
+
+/** Sets up a data read request for an endpoint.
+
+ @param aCallback A reference to a properly filled in data transfer request callback structure.
+
+ @return KErrNone if callback successfully registered or if this callback is already registered
+ (but it won't be registered twice), KErrNotFound if the endpoint couldn't be found, KErrArgument if
+ endpoint number invalid (PSL), KErrGeneral if something else goes wrong.
+*/
+EXPORT_C TInt DUsbClientController::SetupReadBuffer(TUsbcRequestCallback& aCallback)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetupReadBuffer()"));
+ const TInt ep = aCallback.iRealEpNum;
+ __KTRACE_OPT(KUSB, Kern::Printf(" logical ep: #%d", aCallback.iEndpointNum));
+ __KTRACE_OPT(KUSB, Kern::Printf(" real ep: #%d", ep));
+ TInt err = KErrGeneral;
+ if (ep != 0)
+ {
+ if (iRequestCallbacks[ep])
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Warning: RequestCallback already registered for that ep"));
+ if (iRequestCallbacks[ep] == &aCallback)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" (this same RequestCallback @ 0x%x)", &aCallback));
+ }
+ else
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" (a different RequestCallback @ 0x%x)", &aCallback));
+ }
+ return KErrNone;
+ }
+ // This may seem awkward:
+ // First we add a callback, and then, in case of an error, we remove it again.
+ // However this is necessary because the transfer request might complete (through
+ // an ISR) _before_ the SetupEndpointRead function returns. Since we don't know the
+ // outcome, we have to provide the callback before making the setup call.
+ //
+ __KTRACE_OPT(KUSB, Kern::Printf(" adding RequestCallback[%d] @ 0x%x", ep, &aCallback));
+ iRequestCallbacks[ep] = &aCallback;
+ if ((err = iController.SetupEndpointRead(ep, aCallback)) != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" removing RequestCallback @ 0x%x (due to error)",
+ &aCallback));
+ iRequestCallbacks[ep] = NULL;
+ }
+ }
+ else // (ep == 0)
+ {
+ if (iEp0ReadRequestCallbacks.Elements() == KUsbcMaxListLength)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Maximum list length reached: %d",
+ KUsbcMaxListLength));
+ return KErrGeneral;
+ }
+ if (IsInTheRequestList(aCallback))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" RequestCallback @ 0x%x already registered", &aCallback));
+ return KErrNone;
+ }
+ // Ep0 reads don't need to be prepared - there's always one pending
+ __KTRACE_OPT(KUSB, Kern::Printf(" adding RequestCallback @ 0x%x (ep0)", &aCallback));
+ const TInt irq = __SPIN_LOCK_IRQSAVE(iUsbLock);
+ iEp0ReadRequestCallbacks.AddLast(aCallback);
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ err = KErrNone;
+ if (iEp0_RxExtraCount != 0)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" iEp0_RxExtraData: trying again..."));
+
+ const TInt irq = __SPIN_LOCK_IRQSAVE(iUsbLock);
+
+ // Extra data is either a setup packet or a data packet
+ // They are not possible to be both
+ // And, the error code must be KErrNone, otherwise, we can not arrive here
+ if( iSetupPacketPending )
+ {
+ ProcessSetupPacket(iEp0_RxExtraCount,KErrNone);
+ }
+ else
+ {
+ ProcessDataOutPacket(iEp0_RxExtraCount,KErrNone);
+ }
+
+ // clear it since already completed to client
+ iEp0_RxExtraCount = 0;
+
+ err = iLastError;
+
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ if (err == KErrNone)
+ {
+ //iEp0_RxExtraData = EFalse;
+ // Queue a new Ep0 read (because xxxProceed only re-enables the interrupt)
+ iConTransferMgr->SetupEndpointZeroRead();
+ if (iSetupPacketPending)
+ {
+ iConTransferMgr->Ep0SetupPacketProceed();
+ iSetupPacketPending = EFalse;
+ }
+ else
+ {
+ iConTransferMgr->Ep0DataPacketProceed();
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf(" :-)"));
+ }
+ else
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: :-("));
+ err = KErrGeneral;
+ }
+ return err;
+ }
+ }
+ return err;
+ }
+
+
+/** Sets up a data write request for an endpoint.
+
+ @param aCallback A reference to a properly filled in data transfer request callback structure.
+
+ @return KErrNone if callback successfully registered or if this callback is already registered
+ (but it won't be registered twice), KErrNotFound if the endpoint couldn't be found, KErrArgument if
+ endpoint number invalid (PSL), KErrGeneral if something else goes wrong.
+*/
+EXPORT_C TInt DUsbClientController::SetupWriteBuffer(TUsbcRequestCallback& aCallback)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetupWriteBuffer()"));
+ TInt ep = aCallback.iRealEpNum;
+ __KTRACE_OPT(KUSB, Kern::Printf(" logical ep: #%d", aCallback.iEndpointNum));
+ __KTRACE_OPT(KUSB, Kern::Printf(" real ep: #%d", ep));
+ if (iRequestCallbacks[ep])
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Warning: RequestCallback already registered for that ep"));
+ if (iRequestCallbacks[ep] == &aCallback)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" (this same RequestCallback @ 0x%x)", &aCallback));
+ return KErrNone;
+ }
+ else
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" (a different RequestCallback @ 0x%x - poss. error)",
+ &aCallback));
+ return KErrGeneral;
+ }
+ }
+ if (ep == 0)
+ {
+ if (iEp0_TxNonStdCount)
+ {
+ if (iEp0_TxNonStdCount > aCallback.iLength)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Warning: Ep0 is sending less data than requested"));
+ if ((aCallback.iLength % iEp0MaxPacketSize == 0) && !aCallback.iZlpReqd)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Warning: Zlp should probably be requested"));
+ }
+ }
+ else if (iEp0_TxNonStdCount < aCallback.iLength)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Warning: Ep0 is sending more data than requested"));
+ }
+ iEp0_TxNonStdCount = 0;
+ }
+ // Ep0 IN needs to be adjusted: the LDD uses 0 for both Ep0 directions.
+ ep = KEp0_Tx;
+ }
+ // This may seem awkward:
+ // First we add a callback, and then, in case of an error, we remove it again.
+ // However this is necessary because the transfer request might complete (through
+ // an ISR) _before_ the SetupEndpointWrite function returns. Since we don't know the
+ // outcome, we have to provide the callback before making the setup call.
+ //
+ __KTRACE_OPT(KUSB, Kern::Printf(" adding RequestCallback[%d] @ 0x%x", ep, &aCallback));
+ iRequestCallbacks[ep] = &aCallback;
+ if (ep == KEp0_Tx)
+ {
+ iEp0ClientDataTransmitting = ETrue; // this must be set before calling SetupEndpointZeroWrite
+ TInt ret = iConTransferMgr->SetupEndpointZeroWrite(aCallback.iBufferStart, aCallback.iLength, aCallback.iZlpReqd);
+ if (ret != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" removing RequestCallback @ 0x%x (due to error)", &aCallback));
+ iRequestCallbacks[ep] = NULL;
+ iEp0ClientDataTransmitting = EFalse;
+ return ret;
+ }
+ }
+ else if (iController.SetupEndpointWrite(ep, aCallback) != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" removing RequestCallback @ 0x%x (due to error)", &aCallback));
+ iRequestCallbacks[ep] = NULL;
+ }
+ return KErrNone;
+ }
+
+
+/** Cancels a data read request for an endpoint.
+
+ The request callback will be removed from the queue and the
+ callback function won't be executed.
+
+ @param aClientId A pointer to the LDD owning the interface which contains the endpoint.
+ @param aRealEndpoint The number of the endpoint for which the transfer request is to be cancelled.
+*/
+EXPORT_C void DUsbClientController::CancelReadBuffer(const DBase* aClientId, TInt aRealEndpoint)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::CancelReadBuffer(%d)", aRealEndpoint));
+ if (aRealEndpoint < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: ep # < 0: %d", aRealEndpoint));
+ return;
+ }
+ // Note that we here don't cancel Ep0 read requests at the PSL level!
+ if (aRealEndpoint > 0)
+ {
+ iController.CancelEndpointRead(aRealEndpoint);
+ }
+ DeleteRequestCallback(aClientId, aRealEndpoint, UsbShai::EControllerRead);
+ }
+
+
+/** Cancels a data write request for an endpoint.
+
+ It cannot be guaranteed that the data is not sent nonetheless, as some UDCs don't permit a flushing of a
+ TX FIFO once it has been filled. The request callback will be removed from the queue in any case and the
+ callback function won't be executed.
+
+ @param aClientId A pointer to the LDD owning the interface which contains the endpoint.
+ @param aRealEndpoint The number of the endpoint for which the transfer request is to be cancelled.
+*/
+EXPORT_C void DUsbClientController::CancelWriteBuffer(const DBase* aClientId, TInt aRealEndpoint)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::CancelWriteBuffer(%d)", aRealEndpoint));
+ if (aRealEndpoint < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: ep # < 0: %d", aRealEndpoint));
+ return;
+ }
+ if (aRealEndpoint == 0)
+ {
+ // Ep0 IN needs to be adjusted: the LDD uses 0 for both Ep0 directions.
+ aRealEndpoint = KEp0_Tx;
+ }
+ iController.CancelEndpointWrite(aRealEndpoint);
+ if (aRealEndpoint == KEp0_Tx)
+ {
+ // Since Ep0 is shared among clients, we don't have to care about the client id.
+ iEp0WritePending = EFalse;
+ }
+ DeleteRequestCallback(aClientId, aRealEndpoint, UsbShai::EControllerWrite);
+ }
+
+
+/** Halts (stalls) an endpoint (but not Ep0).
+
+ @param aClientId A pointer to the LDD owning the interface which contains the endpoint to be stalled.
+ @param aEndpointNum The number of the endpoint.
+
+ @return KErrNotFound if endpoint couldn't be found (includes Ep0), KErrNone if endpoint successfully
+ stalled, KErrGeneral otherwise.
+*/
+EXPORT_C TInt DUsbClientController::HaltEndpoint(const DBase* aClientId, TInt aEndpointNum)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::HaltEndpoint(%d)", aEndpointNum));
+ const TInt r = iController.StallEndpoint(aEndpointNum);
+ if (r == KErrNone)
+ {
+ iRealEndpoints[aEndpointNum].iHalt = ETrue;
+ }
+ else if (r == KErrArgument)
+ {
+ return KErrNotFound;
+ }
+ return r;
+ }
+
+
+/** Clears the halt condition of an endpoint (but not Ep0).
+
+ @param aClientId A pointer to the LDD owning the interface which contains the endpoint to be un-stalled.
+ @param aEndpointNum The number of the endpoint.
+
+ @return KErrNotFound if endpoint couldn't be found (includes Ep0), KErrNone if endpoint successfully
+ stalled, KErrGeneral otherwise.
+*/
+EXPORT_C TInt DUsbClientController::ClearHaltEndpoint(const DBase* aClientId, TInt aEndpointNum)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::ClearHaltEndpoint(%d)", aEndpointNum));
+ const TInt r = iController.ClearStallEndpoint(aEndpointNum);
+ if (r == KErrNone)
+ {
+ iRealEndpoints[aEndpointNum].iHalt = EFalse;
+ }
+ else if (r == KErrArgument)
+ {
+ return KErrNotFound;
+ }
+ return r;
+ }
+
+
+/** This function requests 'device control' for an LDD.
+
+ Class or vendor specific Ep0 requests addressed to the USB device as a whole (Recipient field in
+ bmRequestType byte of a Setup packet set to zero) are delivered to the LDD that owns device control. For
+ obvious reasons only one USB LDD can have device control at any given time.
+
+ @param aClientId A pointer to the LDD requesting device control.
+
+ @return KErrNone if device control successfully claimed or if this LDD already owns it, KErrGeneral if
+ device control already owned by a different client.
+*/
+EXPORT_C TInt DUsbClientController::SetDeviceControl(const DBase* aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetDeviceControl()"));
+ if (iEp0DeviceControl)
+ {
+ if (iEp0DeviceControl == aClientId)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Warning: Device Control already owned by this client"));
+ return KErrNone;
+ }
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Device Control already claimed by a different client"));
+ return KErrGeneral;
+ }
+ iEp0DeviceControl = aClientId;
+ return KErrNone;
+ }
+
+
+/** This function releases device control for an LDD.
+
+ @see DUsbClientController::SetDeviceControl()
+
+ @param aClientId A pointer to the LDD releasing device control.
+
+ @return KErrNone if device control successfully released, KErrGeneral if device control owned by a
+ different client or by no client at all.
+*/
+EXPORT_C TInt DUsbClientController::ReleaseDeviceControl(const DBase* aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::ReleaseDeviceControl()"));
+ if (iEp0DeviceControl)
+ {
+ if (iEp0DeviceControl == aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Releasing Device Control"));
+ iEp0DeviceControl = NULL;
+ return KErrNone;
+ }
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Device Control owned by a different client"));
+ }
+ else
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Device Control not owned by any client"));
+ }
+ return KErrGeneral;
+ }
+
+
+/** Returns all available (configurable) max packet sizes for Ep0.
+
+ The information is coded as bitwise OR'ed values of KUsbEpSizeXXX constants (the bitmap format used for
+ TUsbcEndpointCaps.iSupportedSizes).
+
+ @return All available (configurable) max packet sizes for Ep0.
+*/
+EXPORT_C TUint DUsbClientController::EndpointZeroMaxPacketSizes() const
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::EndpointZeroMaxPacketSizes()"));
+ return iRealEndpoints[0].iCaps.iSizes;
+ }
+
+
+/** Sets (configures) the max packet size for Ep0.
+
+ For available sizes as returned by DUsbClientController::EndpointZeroMaxPacketSizes()
+
+ Note that for HS operation the Ep0 size cannot be chosen, but is fixed at 64 bytes.
+
+ @return KErrNotSupported if invalid size specified, KErrNone if new max packet size successfully set or
+ requested size was already set.
+*/
+EXPORT_C TInt DUsbClientController::SetEndpointZeroMaxPacketSize(TInt aMaxPacketSize)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetEndpointZeroMaxPacketSize(%d)",
+ aMaxPacketSize));
+
+ if (iControllerProperties.iControllerCaps & UsbShai::KDevCapHighSpeed)
+ {
+ // We're not going to mess with this on a HS device.
+ return KErrNone;
+ }
+
+ if (!(iRealEndpoints[0].iCaps.iSizes & PacketSize2Mask(aMaxPacketSize)))
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: invalid size"));
+ return KErrNotSupported;
+ }
+ if (iRealEndpoints[0].iLEndpoint->iEpSize_Fs == aMaxPacketSize)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" this packet size already set -> returning"));
+ return KErrNone;
+ }
+ const TUsbcLogicalEndpoint* const ep0_0 = iRealEndpoints[0].iLEndpoint;
+ const TUsbcLogicalEndpoint* const ep0_1 = iRealEndpoints[1].iLEndpoint;
+ const_cast<TUsbcLogicalEndpoint*>(ep0_0)->iEpSize_Fs = aMaxPacketSize;
+ const_cast<TUsbcLogicalEndpoint*>(ep0_1)->iEpSize_Fs = aMaxPacketSize;
+
+ // @@@ We should probably modify the device descriptor here as well...
+
+ if (iHardwareActivated)
+ {
+ // De-configure endpoint zero
+ iController.DeConfigureEndpoint(KEp0_Out);
+ iController.DeConfigureEndpoint(KEp0_In);
+ // Re-configure endpoint zero
+ const_cast<TUsbcLogicalEndpoint*>(ep0_0)->iInfo.iSize = ep0_0->iEpSize_Fs;
+ const_cast<TUsbcLogicalEndpoint*>(ep0_1)->iInfo.iSize = ep0_1->iEpSize_Fs;
+ iController.ConfigureEndpoint(0, ep0_0->iInfo);
+ iController.ConfigureEndpoint(1, ep0_1->iInfo);
+ iEp0MaxPacketSize = ep0_0->iInfo.iSize;
+ }
+ return KErrNone;
+ }
+
+
+/** Returns the current USB Device descriptor.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor is running in.
+ @param aDeviceDescriptor A reference to a buffer into which the requested descriptor should be written
+ (most likely located user-side).
+
+ @return The return value of the thread write operation, Kern::ThreadWrite(), when writing to the target
+ buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetDeviceDescriptor(DThread* aThread, TDes8& aDeviceDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetDeviceDescriptor()"));
+ return iDescriptors.GetDeviceDescriptorTC(aThread, aDeviceDescriptor);
+ }
+
+
+/** Sets a new USB Device descriptor.
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the descriptor is running in.
+ @param aDeviceDescriptor A reference to a buffer which contains the descriptor to be set (most likely
+ located user-side).
+
+ @return The return value of the thread read operation, Kern::ThreadRead(), when reading from the source
+ buffer in case of a failure, KErrNone if the new descriptor was successfully set.
+*/
+EXPORT_C TInt DUsbClientController::SetDeviceDescriptor(DThread* aThread, const TDes8& aDeviceDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetDeviceDescriptor()"));
+ return iDescriptors.SetDeviceDescriptorTC(aThread, aDeviceDescriptor);
+ }
+
+
+/** Returns the current USB Device descriptor size.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor size is running in.
+ @param aSize A reference to a buffer into which the requested descriptor size should be written
+ (most likely located user-side).
+
+ @return The return value of the thread write operation, Kern::ThreadWrite(), when writing to the target
+ buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetDeviceDescriptorSize(DThread* aThread, TDes8& aSize)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetDeviceDescriptorSize()"));
+ // We do not really enquire here....
+ const TPtrC8 size(reinterpret_cast<const TUint8*>(&KUsbDescSize_Device), sizeof(KUsbDescSize_Device));
+ return Kern::ThreadDesWrite(aThread, &aSize, size, 0);
+ }
+
+
+/** Returns the current USB configuration descriptor.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor is running in.
+ @param aConfigurationDescriptor A reference to a buffer into which the requested descriptor should be
+ written (most likely located user-side).
+
+ @return The return value of the thread write operation, Kern::ThreadWrite(), when writing to the target
+ buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetConfigurationDescriptor(DThread* aThread, TDes8& aConfigurationDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetConfigurationDescriptor()"));
+ return iDescriptors.GetConfigurationDescriptorTC(aThread, aConfigurationDescriptor);
+ }
+
+
+/** Sets a new USB configuration descriptor.
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the descriptor is running in.
+ @param aConfigurationDescriptor A reference to a buffer which contains the descriptor to be set (most
+ likely located user-side).
+
+ @return The return value of the thread read operation, Kern::ThreadRead() when reading from the source
+ buffer in case of a failure, KErrNone if the new descriptor was successfully set.
+*/
+EXPORT_C TInt DUsbClientController::SetConfigurationDescriptor(DThread* aThread,
+ const TDes8& aConfigurationDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetConfigurationDescriptor()"));
+ return iDescriptors.SetConfigurationDescriptorTC(aThread, aConfigurationDescriptor);
+ }
+
+
+/** Returns the current USB configuration descriptor size.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor size is running in.
+ @param aSize A reference to a buffer into which the requested descriptor size should be written
+ (most likely located user-side).
+
+ @return The return value of the thread write operation, Kern::ThreadWrite(), when writing to the target
+ buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetConfigurationDescriptorSize(DThread* aThread, TDes8& aSize)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetConfigurationDescriptorSize()"));
+ // We do not really enquire here....
+ const TPtrC8 size(reinterpret_cast<const TUint8*>(&KUsbDescSize_Config), sizeof(KUsbDescSize_Config));
+ return Kern::ThreadDesWrite(aThread, &aSize, size, 0);
+ }
+
+
+/** Returns the current USB OTG descriptor.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor size is running in.
+ @param aOtgDesc A reference to a buffer into which the requested descriptor should be
+ written (most likely located user-side).
+
+ @return KErrNotSupported or the return value of the thread write operation, Kern::ThreadDesWrite(),
+ when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetOtgDescriptor(DThread* aThread, TDes8& aOtgDesc) const
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetOtgDescriptor()"));
+ if (!iOtgSupport)
+ {
+ return KErrNotSupported;
+ }
+ return iDescriptors.GetOtgDescriptorTC(aThread, aOtgDesc);
+ }
+
+
+/** Sets a new OTG descriptor.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor size is running in.
+ @param aOtgDesc A reference to a buffer which contains new OTG descriptor.
+
+ @return KErrNotSupported or the return value of the thread read operation, Kern::ThreadDesRead().
+*/
+EXPORT_C TInt DUsbClientController::SetOtgDescriptor(DThread* aThread, const TDesC8& aOtgDesc)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetOtgDescriptor()"));
+ if (!iOtgSupport)
+ {
+ return KErrNotSupported;
+ }
+ TBuf8<KUsbDescSize_Otg> otg;
+ const TInt r = Kern::ThreadDesRead(aThread, &aOtgDesc, otg, 0);
+ if (r != KErrNone)
+ {
+ return r;
+ }
+ // Check descriptor validity
+ if (otg[0] != KUsbDescSize_Otg || otg[1] != KUsbDescType_Otg || otg[2] > 3)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Invalid OTG descriptor"));
+ return KErrGeneral;
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf(" iOtgFuncMap before: 0x%x", iOtgFuncMap));
+ // Update value in controller as well
+ const TUint8 hnp = otg[2] & KUsbOtgAttr_HnpSupp;
+ const TUint8 srp = otg[2] & KUsbOtgAttr_SrpSupp;
+ if (hnp && !srp)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Warning: Invalid OTG attribute combination (HNP && !SRP"));
+ }
+ if (hnp && !(iOtgFuncMap & KUsbOtgAttr_HnpSupp))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Setting attribute KUsbOtgAttr_HnpSupp"));
+ iOtgFuncMap |= KUsbOtgAttr_HnpSupp;
+ }
+ else if (!hnp && (iOtgFuncMap & KUsbOtgAttr_HnpSupp))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Removing attribute KUsbOtgAttr_HnpSupp"));
+ iOtgFuncMap &= ~KUsbOtgAttr_HnpSupp;
+ }
+ if (srp && !(iOtgFuncMap & KUsbOtgAttr_SrpSupp))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Setting attribute KUsbOtgAttr_SrpSupp"));
+ iOtgFuncMap |= KUsbOtgAttr_SrpSupp;
+ }
+ else if (!srp && (iOtgFuncMap & KUsbOtgAttr_SrpSupp))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Removing attribute KUsbOtgAttr_SrpSupp"));
+ iOtgFuncMap &= ~KUsbOtgAttr_SrpSupp;
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf(" iOtgFuncMap after: 0x%x", iOtgFuncMap));
+ return iDescriptors.SetOtgDescriptor(otg);
+ }
+
+
+/** Returns current OTG features of USB device.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor size is running in.
+ @param aFeatures A reference to a buffer into which the requested OTG features should be written.
+
+ @return KErrNotSupported or the return value of the thread write operation, Kern::ThreadDesWrite().
+*/
+EXPORT_C TInt DUsbClientController::GetOtgFeatures(DThread* aThread, TDes8& aFeatures) const
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetOtgFeatures()"));
+ if (!iOtgSupport)
+ {
+ return KErrNotSupported;
+ }
+ TBuf8<1> features(1);
+ features[0] = iOtgFuncMap & 0x1C;
+ return Kern::ThreadDesWrite(aThread, &aFeatures, features, 0);
+ }
+
+
+/** Returns current OTG features of USB device. This function is intended to be
+ called only from kernel side.
+
+ @param aFeatures The reference to which the current features should be set at.
+ @return KErrNone if successful, KErrNotSupported if OTG is unavailable.
+*/
+EXPORT_C TInt DUsbClientController::GetCurrentOtgFeatures(TUint8& aFeatures) const
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetCurrentOtgFeatures()"));
+ if (!iOtgSupport)
+ {
+ return KErrNotSupported;
+ }
+ aFeatures = iOtgFuncMap & 0x1C;
+ return KErrNone;
+ }
+
+
+/** Registers client request for OTG feature change. Client is notified when any OTG
+ feature is changed.
+
+ @see KUsbOtgAttr_B_HnpEnable, KUsbOtgAttr_A_HnpSupport, KUsbOtgAttr_A_AltHnpSupport
+
+ @param aCallback Callback function. Gets called when OTG features change
+
+ @return KErrNone if successful, KErrAlreadyExists if aCallback is already in the queue.
+*/
+EXPORT_C TInt DUsbClientController::RegisterForOtgFeatureChange(TUsbcOtgFeatureCallback& aCallback)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::RegisterForOtgFeatureChange()"));
+ if (iOtgCallbacks.Elements() == KUsbcMaxListLength)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Maximum list length reached: %d",
+ KUsbcMaxListLength));
+ return KErrGeneral;
+ }
+ if (IsInTheOtgFeatureList(aCallback))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Error: OtgFeatureCallback @ 0x%x already registered", &aCallback));
+ return KErrAlreadyExists;
+ }
+ const TInt irq = __SPIN_LOCK_IRQSAVE(iUsbLock);
+ iOtgCallbacks.AddLast(aCallback);
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ return KErrNone;
+ }
+
+
+/** De-registers (removes from the list of pending requests) a notification callback for
+ OTG feature change.
+
+ @param aClientId A pointer to the LDD owning the endpoint status change callback.
+
+ @return KErrNone if callback successfully unregistered, KErrNotFound if the callback couldn't be found.
+*/
+EXPORT_C TInt DUsbClientController::DeRegisterForOtgFeatureChange(const DBase* aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeRegisterForOtgFeatureChange()"));
+ __ASSERT_DEBUG((aClientId != NULL), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ const TInt irq = __SPIN_LOCK_IRQSAVE(iUsbLock);
+ TSglQueIter<TUsbcOtgFeatureCallback> iter(iOtgCallbacks);
+ TUsbcOtgFeatureCallback* p;
+ while ((p = iter++) != NULL)
+ {
+ if (!aClientId || p->Owner() == aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" removing OtgFeatureCallback @ 0x%x", p));
+ iOtgCallbacks.Remove(*p);
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ return KErrNone;
+ }
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf(" client not found"));
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ return KErrNotFound;
+ }
+
+
+/** Returns a specific standard USB interface descriptor.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor is running in.
+ @param aClientId A pointer to the LDD requesting the descriptor.
+ @param aSettingNum The setting number of the interface for which the descriptor is requested.
+ @param aInterfaceDescriptor A reference to a buffer into which the requested descriptor should be written
+ (most likely located user-side).
+
+ @return KErrNotFound if the specified interface couldn't be found, otherwise the return value of the thread
+ write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetInterfaceDescriptor(DThread* aThread, const DBase* aClientId,
+ TInt aSettingNum, TDes8& aInterfaceDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetInterfaceDescriptor(x, 0x%08x, %d, y)",
+ aClientId, aSettingNum));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ return iDescriptors.GetInterfaceDescriptorTC(aThread, aInterfaceDescriptor, ifcset, aSettingNum);
+ }
+
+
+/** Sets a new standard USB interface descriptor.
+
+ This function can also be used, by the user, and under certain conditions, to change an interface's number
+ (reported as bInterfaceNumber in the descriptor). The conditions are: 1) We cannot accept a number that is
+ already used by another interface, 2) We allow the interface number to be changed only when it's still the
+ only setting, and 3) We allow the interface number to be changed only for the default setting (0). (All
+ alternate settings created for that interface thereafter will inherit the new, changed number.)
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the descriptor is running in.
+ @param aClientId A pointer to the LDD requesting the setting of the descriptor.
+ @param aSettingNum The setting number of the interface for which the descriptor is to be set.
+ @param aInterfaceDescriptor A reference to a buffer which contains the descriptor to be set (most
+ likely located user-side).
+
+ @return KErrNotFound if the specified interface couldn't be found, the return value of the thread read
+ operation, Kern::ThreadRead(), when reading from the source buffer in case of a failure, KErrArgument if the
+ interface number is to be changed (via bInterfaceNumber in the descriptor) and either the requested
+ interface number is already used by another interface or the interface has more than one setting. KErrNone
+ if the new descriptor was successfully set.
+*/
+EXPORT_C TInt DUsbClientController::SetInterfaceDescriptor(DThread* aThread, const DBase* aClientId,
+ TInt aSettingNum, const TDes8& aInterfaceDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetInterfaceDescriptor(x, 0x%08x, %d, y)",
+ aClientId, aSettingNum));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ TBuf8<KUsbDescSize_Interface> new_ifc;
+ TInt r = Kern::ThreadDesRead(aThread, &aInterfaceDescriptor, new_ifc, 0);
+ if (r != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Copying interface descriptor buffer failed (%d)", r));
+ return r;
+ }
+ const TInt ifcset_new = new_ifc[2];
+ const TBool ifc_num_changes = (ifcset != ifcset_new);
+ TUsbcInterfaceSet* const ifcset_ptr = InterfaceNumber2InterfacePointer(ifcset);
+ if (!ifcset_ptr)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: interface number %d doesn't exist", ifcset));
+ return KErrNotFound;
+ }
+ if (ifc_num_changes)
+ {
+ // If the user wants to change the interface number, we need to do some sanity checks:
+ if (InterfaceExists(ifcset_new))
+ {
+ // Obviously we cannot accept a number that is already used by another interface.
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: interface number %d already in use", ifcset_new));
+ return KErrArgument;
+ }
+ if (ifcset_ptr->iInterfaces.Count() > 1)
+ {
+ // We allow the interface number to be changed only when it's the only setting.
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: interface has more than one alternate setting"));
+ return KErrArgument;
+ }
+ if (aSettingNum != 0)
+ {
+ // We allow the interface number to be changed only when it's the default setting.
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: interface number can only be changed for setting 0"));
+ return KErrArgument;
+ }
+ }
+ if ((r = iDescriptors.SetInterfaceDescriptor(new_ifc, ifcset, aSettingNum)) != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: iDescriptors.SetInterfaceDescriptorfailed"));
+ return r;
+ }
+ if (ifc_num_changes)
+ {
+ // Alright then, let's do it...
+ __KTRACE_OPT(KUSB, Kern::Printf(" about to change interface number from %d to %d",
+ ifcset, ifcset_new));
+ ifcset_ptr->iInterfaceNumber = ifcset_new;
+ }
+ return KErrNone;
+ }
+
+
+/** Returns the size of a specific standard USB interface descriptor.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor size is running in.
+ @param aClientId A pointer to the LDD requesting the descriptor size.
+ @param aSettingNum The setting number of the interface for which the descriptor size is requested.
+ @param aSize A reference to a buffer into which the requested descriptor size should be written (most
+ likely located user-side).
+
+ @return KErrNotFound if the specified interface couldn't be found, otherwise the return value of the thread
+ write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetInterfaceDescriptorSize(DThread* aThread, const DBase* aClientId,
+ TInt /*aSettingNum*/, TDes8& aSize)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetInterfaceDescriptorSize()"));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ // Actually, we do not really enquire here....
+ const TPtrC8 size(reinterpret_cast<const TUint8*>(&KUsbDescSize_Interface), sizeof(KUsbDescSize_Interface));
+ Kern::ThreadDesWrite(aThread, &aSize, size, 0);
+ return KErrNone;
+ }
+
+
+/** Returns a specific standard USB endpoint descriptor.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor is running in.
+ @param aClientId A pointer to the LDD requesting the descriptor.
+ @param aSettingNum The setting number of the interface that contains the endpoint for which the
+ descriptor is requested.
+ @param aEndpointNum The endpoint for which the descriptor is requested.
+ @param aEndpointDescriptor A reference to a buffer into which the requested descriptor should be written
+ (most likely located user-side).
+
+ @return KErrNotFound if the specified interface or endpoint couldn't be found, otherwise the return value
+ of the thread write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetEndpointDescriptor(DThread* aThread, const DBase* aClientId,
+ TInt aSettingNum, TInt aEndpointNum,
+ TDes8& aEndpointDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetEndpointDescriptor(x, 0x%08x, %d, %d, y)",
+ aClientId, aSettingNum, aEndpointNum));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ return iDescriptors.GetEndpointDescriptorTC(aThread, aEndpointDescriptor, ifcset,
+ aSettingNum, EpIdx2Addr(aEndpointNum));
+ }
+
+
+/** Sets a new standard USB endpoint descriptor.
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the descriptor is running in.
+ @param aClientId A pointer to the LDD requesting the setting of the descriptor.
+ @param aSettingNum The setting number of the interface that contains the endpoint for which the
+ descriptor is to be set.
+ @param aEndpointNum The endpoint for which the descriptor is to be set.
+ @param aEndpointDescriptor A reference to a buffer which contains the descriptor to be set (most
+ likely located user-side).
+
+ @return KErrNotFound if the specified interface or endpoint couldn't be found, the return value of the
+ thread read operation, Kern::ThreadRead(), when reading from the source buffer in case of a read failure,
+ KErrNone if the new descriptor was successfully set.
+*/
+EXPORT_C TInt DUsbClientController::SetEndpointDescriptor(DThread* aThread, const DBase* aClientId,
+ TInt aSettingNum, TInt aEndpointNum,
+ const TDes8& aEndpointDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetEndpointDescriptor(x, 0x%08x, %d, %d, y)",
+ aClientId, aSettingNum, aEndpointNum));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ return iDescriptors.SetEndpointDescriptorTC(aThread, aEndpointDescriptor, ifcset,
+ aSettingNum, EpIdx2Addr(aEndpointNum));
+ }
+
+
+/** Returns the size of a specific standard USB endpoint descriptor.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor size is running in.
+ @param aClientId A pointer to the LDD requesting the descriptor size.
+ @param aSettingNum The setting number of the interface that contains the endpoint for which the
+ descriptor size is requested.
+ @param aEndpointNum The endpoint for which the descriptor size is requested.
+ @param aEndpointDescriptor A reference to a buffer into which the requested descriptor size should be
+ written (most likely located user-side).
+
+ @return KErrNotFound if the specified interface or endpoint couldn't be found, otherwise the return value
+ of the thread write operation, kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetEndpointDescriptorSize(DThread* aThread, const DBase* aClientId,
+ TInt aSettingNum, TInt aEndpointNum,
+ TDes8& aSize)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetEndpointDescriptorSize(x, 0x%08x, %d, %d, y)",
+ aClientId, aSettingNum, aEndpointNum));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ TInt s;
+ TInt r = iDescriptors.GetEndpointDescriptorSize(ifcset, aSettingNum,
+ EpIdx2Addr(aEndpointNum), s);
+ if (r == KErrNone)
+ {
+ TPtrC8 size(reinterpret_cast<const TUint8*>(&s), sizeof(s));
+ r = Kern::ThreadDesWrite(aThread, &aSize, size, 0);
+ }
+ else
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: endpoint descriptor not found"));
+ }
+ return r;
+ }
+
+
+/** Returns the current Device_Qualifier descriptor. On a USB device which doesn't support high-speed
+ operation this function will return an error. Note that the contents of the descriptor depend on
+ the current device speed (full-speed or high-speed).
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor is running in.
+ @param aDeviceQualifierDescriptor A reference to a buffer into which the requested descriptor
+ should be written (most likely located user-side).
+
+ @return KErrNotSupported if this descriptor is not supported, otherwise the return value of the thread
+ write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetDeviceQualifierDescriptor(DThread* aThread,
+ TDes8& aDeviceQualifierDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetDeviceQualifierDescriptor()"));
+ return iDescriptors.GetDeviceQualifierDescriptorTC(aThread, aDeviceQualifierDescriptor);
+ }
+
+
+/** Sets a new Device_Qualifier descriptor. On a USB device which doesn't support high-speed
+ operation this function will return an error. Note that the contents of the descriptor should take
+ into account the current device speed (full-speed or high-speed) as it is dependent on it.
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the descriptor is running in.
+ @param aDeviceQualifierDescriptor A reference to a buffer which contains the descriptor to be set (most
+ likely located user-side).
+
+ @return KErrNotSupported if this descriptor is not supported, otherwise the return value of the thread
+ read operation, Kern::ThreadRead(), when reading from the source buffer in case of a failure, KErrNone if
+ the new descriptor was successfully set.
+*/
+EXPORT_C TInt DUsbClientController::SetDeviceQualifierDescriptor(DThread* aThread,
+ const TDes8& aDeviceQualifierDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetDeviceQualifierDescriptor()"));
+ return iDescriptors.SetDeviceQualifierDescriptorTC(aThread, aDeviceQualifierDescriptor);
+ }
+
+
+/** Returns the current Other_Speed_Configuration descriptor. On a USB device which doesn't support high-speed
+ operation this function will return an error. Note that the contents of the descriptor depend on the
+ current device speed (full-speed or high-speed).
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor is running in.
+ @param aConfigurationDescriptor A reference to a buffer into which the requested descriptor
+ should be written (most likely located user-side).
+
+ @return KErrNotSupported if this descriptor is not supported, otherwise the return value of the thread
+ write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetOtherSpeedConfigurationDescriptor(DThread* aThread,
+ TDes8& aConfigurationDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetOtherSpeedConfigurationDescriptor()"));
+ return iDescriptors.GetOtherSpeedConfigurationDescriptorTC(aThread, aConfigurationDescriptor);
+ }
+
+
+/** Sets a new Other_Speed_Configuration descriptor. On a USB device which doesn't support high-speed
+ operation this function will return an error. Note that the contents of the descriptor should take
+ into account the current device speed (full-speed or high-speed) as it is dependent on it.
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the descriptor is running in.
+ @param aConfigurationDescriptor A reference to a buffer which contains the descriptor to be set (most
+ likely located user-side).
+
+ @return KErrNotSupported if this descriptor is not supported, otherwise the return value of the thread
+ read operation, Kern::ThreadRead(), when reading from the source buffer in case of a failure, KErrNone if
+ the new descriptor was successfully set.
+*/
+EXPORT_C TInt DUsbClientController::SetOtherSpeedConfigurationDescriptor(DThread* aThread,
+ const TDes8& aConfigurationDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetOtherSpeedConfigurationDescriptor()"));
+ return iDescriptors.SetOtherSpeedConfigurationDescriptorTC(aThread, aConfigurationDescriptor);
+ }
+
+
+/** Returns a block of all available non-standard (class-specific) interface descriptors for a specific
+ interface.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor block is running in.
+ @param aClientId A pointer to the LDD requesting the descriptor block.
+ @param aSettingNum The setting number of the interface for which the descriptor block is requested.
+ @param aInterfaceDescriptor A reference to a buffer into which the requested descriptor(s) should be
+ written (most likely located user-side).
+
+ @return KErrNotFound if the specified interface couldn't be found, otherwise the return value of the thread
+ write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetCSInterfaceDescriptorBlock(DThread* aThread, const DBase* aClientId,
+ TInt aSettingNum,
+ TDes8& aInterfaceDescriptor)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetCSInterfaceDescriptorBlock(x, 0x%08x, %d, y)",
+ aClientId, aSettingNum));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ return iDescriptors.GetCSInterfaceDescriptorTC(aThread, aInterfaceDescriptor, ifcset, aSettingNum);
+ }
+
+
+/** Sets a block of (i.e. one or more) non-standard (class-specific) interface descriptors for a specific
+ interface.
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the descriptor block is running
+ in.
+ @param aClientId A pointer to the LDD requesting the setting of the descriptor block.
+ @param aSettingNum The setting number of the interface for which the setting of the descriptor block is
+ requested.
+ @param aInterfaceDescriptor A reference to a buffer which contains the descriptor block to be set (most
+ likely located user-side).
+ @param aSize The size of the descriptor block to be set.
+
+ @return KErrNotFound if the specified interface couldn't be found, KErrArgument if aSize is less than 2,
+ KErrNoMemory if enough memory for the new descriptor(s) couldn't be allocated, otherwise the return value
+ of the thread read operation, Kern::ThreadRead(), when reading from the source buffer.
+*/
+EXPORT_C TInt DUsbClientController::SetCSInterfaceDescriptorBlock(DThread* aThread, const DBase* aClientId,
+ TInt aSettingNum,
+ const TDes8& aInterfaceDescriptor, TInt aSize)
+ {
+ __KTRACE_OPT(KUSB,
+ Kern::Printf("DUsbClientController::SetCSInterfaceDescriptorBlock(x, 0x%08x, %d, y, %d)",
+ aClientId, aSettingNum, aSize));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ if (aSize < 2)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: aSize < 2 (%d)", aSize));
+ return KErrArgument;
+ }
+ return iDescriptors.SetCSInterfaceDescriptorTC(aThread, aInterfaceDescriptor, ifcset, aSettingNum, aSize);
+ }
+
+
+/** Returns the total size all non-standard (class-specific) interface descriptors for a specific interface.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor block size is running in.
+ @param aClientId A pointer to the LDD requesting the descriptor block size.
+ @param aSettingNum The setting number of the interface for which the descriptor block size is
+ requested.
+ @param aSize A reference to a buffer into which the requested descriptor block size should be written (most
+ likely located user-side).
+
+ @return KErrNotFound if the specified interface couldn't be found, otherwise the return value of the thread
+ write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetCSInterfaceDescriptorBlockSize(DThread* aThread, const DBase* aClientId,
+ TInt aSettingNum, TDes8& aSize)
+ {
+ __KTRACE_OPT(KUSB,
+ Kern::Printf("DUsbClientController::GetCSInterfaceDescriptorBlockSize(x, 0x%08x, %d, y)",
+ aClientId, aSettingNum));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ TInt s;
+ const TInt r = iDescriptors.GetCSInterfaceDescriptorSize(ifcset, aSettingNum, s);
+ if (r == KErrNone)
+ {
+ const TPtrC8 size(reinterpret_cast<const TUint8*>(&s), sizeof(s));
+ Kern::ThreadDesWrite(aThread, &aSize, size, 0);
+ }
+ else
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: cs interface descriptor not found"));
+ }
+ return r;
+ }
+
+
+/** Returns a block of all available non-standard (class-specific) endpoint descriptors for a specific endpoint.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor block is running in.
+ @param aClientId A pointer to the LDD requesting the descriptor block.
+ @param aSettingNum The setting number of the interface that contains the endpoint for which the
+ descriptor block is requested.
+ @param aEndpointNum The endpoint for which the descriptor block is requested.
+ @param aEndpointDescriptor A reference to a buffer into which the requested descriptor(s) should be written
+ (most likely located user-side).
+
+ @return KErrNotFound if the specified interface or endpoint couldn't be found, otherwise the return value
+ of the thread write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetCSEndpointDescriptorBlock(DThread* aThread, const DBase* aClientId,
+ TInt aSettingNum, TInt aEndpointNum,
+ TDes8& aEndpointDescriptor)
+ {
+ __KTRACE_OPT(KUSB,
+ Kern::Printf("DUsbClientController::GetCSEndpointDescriptorBlock(x, 0x%08x, %d, %d, y)",
+ aClientId, aSettingNum, aEndpointNum));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ return iDescriptors.GetCSEndpointDescriptorTC(aThread, aEndpointDescriptor, ifcset,
+ aSettingNum, EpIdx2Addr(aEndpointNum));
+ }
+
+
+/** Sets a block of (i.e. one or more) non-standard (class-specific) endpoint descriptors for a specific
+ endpoint.
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the descriptor block is running
+ in.
+ @param aClientId A pointer to the LDD requesting the setting of the descriptor block.
+ @param aSettingNum The setting number of the interface that contains the endpoint for which the
+ descriptor block is to be set.
+ @param aEndpointNum The endpoint for which the descriptor block is to be set.
+ @param aEndpointDescriptor A reference to a buffer which contains the descriptor block to be set (most
+ likely located user-side).
+ @param aSize The size of the descriptor block to be set.
+
+ @return KErrNotFound if the specified interface or endpoint couldn't be found, KErrArgument if aSize is
+ less than 2, KErrNoMemory if enough memory for the new descriptor(s) couldn't be allocated, otherwise the
+ return value of the thread read operation, Kern::ThreadRead(), when reading from the source buffer.
+*/
+EXPORT_C TInt DUsbClientController::SetCSEndpointDescriptorBlock(DThread* aThread, const DBase* aClientId,
+ TInt aSettingNum, TInt aEndpointNum,
+ const TDes8& aEndpointDescriptor, TInt aSize)
+ {
+ __KTRACE_OPT(KUSB,
+ Kern::Printf("DUsbClientController::SetCSEndpointDescriptorBlock(x, 0x%08x, %d, %d, y)",
+ aClientId, aSettingNum, aEndpointNum));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ if (aSize < 2)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: aSize < 2 (%d)", aSize));
+ return KErrArgument;
+ }
+ return iDescriptors.SetCSEndpointDescriptorTC(aThread, aEndpointDescriptor, ifcset,
+ aSettingNum, EpIdx2Addr(aEndpointNum), aSize);
+ }
+
+
+/** Returns the total size all non-standard (class-specific) endpoint descriptors for a specific endpoint.
+
+ @param aThread A pointer to the thread the LDD requesting the descriptor block size is running in.
+ @param aClientId A pointer to the LDD requesting the descriptor block size.
+ @param aSettingNum The setting number of the interface for which the descriptor block size is
+ requested.
+ @param aEndpointNum The endpoint for which the descriptor block size is requested.
+ @param aSize A reference to a buffer into which the requested descriptor block size should be written (most
+ likely located user-side).
+
+ @return KErrNotFound if the specified interface or endpoint couldn't be found, otherwise the return value
+ of the thread write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetCSEndpointDescriptorBlockSize(DThread* aThread, const DBase* aClientId,
+ TInt aSettingNum, TInt aEndpointNum,
+ TDes8& aSize)
+ {
+ __KTRACE_OPT(KUSB,
+ Kern::Printf("DUsbClientController::GetCSEndpointDescriptorBlockSize(x, 0x%08x, %d, %d, y)",
+ aClientId, aSettingNum, aEndpointNum));
+ const TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Interface not found from client ID"));
+ return KErrNotFound;
+ }
+ TInt s;
+ const TInt r = iDescriptors.GetCSEndpointDescriptorSize(ifcset, aSettingNum,
+ EpIdx2Addr(aEndpointNum), s);
+ if (r == KErrNone)
+ {
+ const TPtrC8 size(reinterpret_cast<const TUint8*>(&s), sizeof(s));
+ Kern::ThreadDesWrite(aThread, &aSize, size, 0);
+ }
+ else
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: cs endpoint descriptor not found"));
+ }
+ return r;
+ }
+
+
+/** Returns the currently set string descriptor language ID (LANGID) code.
+
+ @param aThread A pointer to the thread the LDD requesting the LANGID is running in.
+ @param aLangId A reference to a buffer into which the requested code should be written (most likely
+ located user-side).
+
+ @return The return value of the thread write operation, Kern::ThreadDesWrite(),
+ when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetStringDescriptorLangId(DThread* aThread, TDes8& aLangId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetStringDescriptorLangId()"));
+ return iDescriptors.GetStringDescriptorLangIdTC(aThread, aLangId);
+ }
+
+
+/** Sets the string descriptor language ID (LANGID) code.
+
+ @param aLangId The langauge ID code to be written.
+
+ @return KErrNone.
+*/
+EXPORT_C TInt DUsbClientController::SetStringDescriptorLangId(TUint16 aLangId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetStringDescriptorLangId()"));
+ return iDescriptors.SetStringDescriptorLangId(aLangId);
+ }
+
+
+/** Returns the currently set Manufacturer string (which is referenced by the iManufacturer field in the device
+ descriptor).
+
+ (Thus, the function should actually be called either 'GetManufacturerString'
+ or 'GetManufacturerStringDescriptorString'.)
+
+ @param aThread A pointer to the thread the LDD requesting the string is running in.
+ @param aString A reference to a buffer into which the requested string should be written (most likely
+ located user-side).
+
+ @return KErrNotFound if the string descriptor couldn't be found (PIL internal error), otherwise the return
+ value of the thread write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetManufacturerStringDescriptor(DThread* aThread, TDes8& aString)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetManufacturerStringDescriptor()"));
+ return iDescriptors.GetManufacturerStringDescriptorTC(aThread, aString);
+ }
+
+
+/** Sets a new Manufacturer string in the Manufacturer string descriptor (which is referenced by the
+ iManufacturer field in the device descriptor).
+
+ (Thus, the function should actually be called either
+ 'SetManufacturerString' or 'SetManufacturerStringDescriptorString'.)
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the string is running in.
+ @param aString A reference to a buffer which contains the string to be set (most likely located
+ user-side).
+
+ @return KErrNoMemory if not enough memory for the new descriptor or the string could be allocated, the
+ return value of the thread read operation, Kern::ThreadRead(), if reading from the source buffer goes wrong,
+ KErrNone if new string descriptor successfully set.
+*/
+EXPORT_C TInt DUsbClientController::SetManufacturerStringDescriptor(DThread* aThread, const TDes8& aString)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetManufacturerStringDescriptor()"));
+ return iDescriptors.SetManufacturerStringDescriptorTC(aThread, aString);
+ }
+
+
+/** Removes (deletes) the Manufacturer string descriptor (which is referenced by the
+ iManufacturer field in the device descriptor).
+
+ @return KErrNone if successful, KErrNotFound if the string descriptor couldn't be found
+*/
+EXPORT_C TInt DUsbClientController::RemoveManufacturerStringDescriptor()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::RemoveManufacturerStringDescriptor()"));
+ return iDescriptors.RemoveManufacturerStringDescriptor();
+ }
+
+
+/** Returns the currently set Product string (which is referenced by the iProduct field in the device
+ descriptor).
+
+ (Thus, the function should actually be called either 'GetProductString' or
+ 'GetProductStringDescriptorString'.)
+
+ @param aThread A pointer to the thread the LDD requesting the string is running in.
+ @param aString A reference to a buffer into which the requested string should be written (most likely
+ located user-side).
+
+ @return KErrNotFound if the string descriptor couldn't be found (PIL internal error), otherwise the return
+ value of the thread write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetProductStringDescriptor(DThread* aThread, TDes8& aString)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetProductStringDescriptor()"));
+ return iDescriptors.GetProductStringDescriptorTC(aThread, aString);
+ }
+
+
+/** Sets a new Product string in the Product string descriptor (which is referenced by the iProduct field in
+ the device descriptor).
+
+ (Thus, the function should actually be called either 'SetProductString' or
+ 'SetProductStringDescriptorString'.)
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the string is running in.
+ @param aString A reference to a buffer which contains the string to be set (most likely located
+ user-side).
+
+ @return KErrNoMemory if not enough memory for the new descriptor or the string could be allocated, the
+ return value of the thread read operation, Kern::ThreadRead(), if reading from the source buffer goes wrong,
+ KErrNone if new string descriptor successfully set.
+*/
+EXPORT_C TInt DUsbClientController::SetProductStringDescriptor(DThread* aThread, const TDes8& aString)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetProductStringDescriptor()"));
+ return iDescriptors.SetProductStringDescriptorTC(aThread, aString);
+ }
+
+
+/** Removes (deletes) the Product string descriptor (which is referenced by the
+ iProduct field in the device descriptor).
+
+ @return KErrNone if successful, KErrNotFound if the string descriptor couldn't be found
+*/
+EXPORT_C TInt DUsbClientController::RemoveProductStringDescriptor()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::RemoveProductStringDescriptor()"));
+ return iDescriptors.RemoveProductStringDescriptor();
+ }
+
+
+/** Returns the currently set SerialNumber string (which is referenced by the iSerialNumber field in the device
+ descriptor).
+
+ (Thus, the function should actually be called either 'GetSerialNumberString' or
+ 'GetSerialNumberStringDescriptorString'.)
+
+ @param aThread A pointer to the thread the LDD requesting the string is running in.
+ @param aString A reference to a buffer into which the requested string should be written (most likely
+ located user-side).
+
+ @return KErrNotFound if the string descriptor couldn't be found (PIL internal error), otherwise the return
+ value of the thread write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetSerialNumberStringDescriptor(DThread* aThread, TDes8& aString)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetSerialNumberStringDescriptor()"));
+ return iDescriptors.GetSerialNumberStringDescriptorTC(aThread, aString);
+ }
+
+
+/** Sets a new SerialNumber string in the SerialNumber string descriptor (which is referenced by the
+ iSerialNumber field in the device descriptor).
+
+ (Thus, the function should actually be called either
+ 'SetSerialNumberString' or 'SetSerialNumberStringDescriptorString'.)
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the string is running in.
+ @param aString A reference to a buffer which contains the string to be set (most likely located
+ user-side).
+
+ @return KErrNoMemory if not enough memory for the new descriptor or the string could be allocated, the
+ return value of the thread read operation, Kern::ThreadRead(), if reading from the source buffer goes wrong,
+ KErrNone if new string descriptor successfully set.
+*/
+EXPORT_C TInt DUsbClientController::SetSerialNumberStringDescriptor(DThread* aThread, const TDes8& aString)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetSerialNumberStringDescriptor()"));
+ return iDescriptors.SetSerialNumberStringDescriptorTC(aThread, aString);
+ }
+
+
+/** Removes (deletes) the Serial Number string descriptor (which is referenced by the
+ iSerialNumber field in the device descriptor).
+
+ @return KErrNone if successful, KErrNotFound if the string descriptor couldn't be found
+*/
+EXPORT_C TInt DUsbClientController::RemoveSerialNumberStringDescriptor()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::RemoveSerialNumberStringDescriptor()"));
+ return iDescriptors.RemoveSerialNumberStringDescriptor();
+ }
+
+
+/** Returns the currently set Configuration string (which is referenced by the iConfiguration field in the
+ configuration descriptor).
+
+ (Thus, the function should actually be called either 'GetConfigurationString' or
+ 'GetConfigurationStringDescriptorString'.)
+
+ @param aThread A pointer to the thread the LDD requesting the string is running in.
+ @param aString A reference to a buffer into which the requested string should be written (most likely
+ located user-side).
+
+ @return KErrNotFound if the string descriptor couldn't be found (PIL internal error), otherwise the return
+ value of the thread write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetConfigurationStringDescriptor(DThread* aThread, TDes8& aString)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetConfigurationStringDescriptor()"));
+ return iDescriptors.GetConfigurationStringDescriptorTC(aThread, aString);
+ }
+
+
+/** Sets a new Configuration string in the Configuration string descriptor (which is referenced by the
+ iConfiguration field in the configuration descriptor).
+
+ (Thus, the function should actually be called either
+ 'SetConfigurationString' or 'SetConfigurationStringDescriptorString'.)
+
+ @param aThread A pointer to the thread the LDD requesting the setting of the string is running in.
+ @param aString A reference to a buffer which contains the string to be set (most likely located
+ user-side).
+
+ @return KErrNoMemory if not enough memory for the new descriptor or the string could be allocated, the
+ return value of the thread read operation, Kern::ThreadRead(), if reading from the source buffer goes wrong,
+ KErrNone if new string descriptor successfully set.
+*/
+EXPORT_C TInt DUsbClientController::SetConfigurationStringDescriptor(DThread* aThread, const TDes8& aString)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetConfigurationStringDescriptor()"));
+ return iDescriptors.SetConfigurationStringDescriptorTC(aThread, aString);
+ }
+
+
+/** Removes (deletes) the Configuration string descriptor (which is referenced by the
+ iConfiguration field in the configuration descriptor).
+
+ @return KErrNone if successful, KErrNotFound if the string descriptor couldn't be found.
+*/
+EXPORT_C TInt DUsbClientController::RemoveConfigurationStringDescriptor()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::RemoveConfigurationStringDescriptor()"));
+ return iDescriptors.RemoveConfigurationStringDescriptor();
+ }
+
+
+/** Copies the string descriptor at the specified index in the string descriptor array into
+ the aString argument.
+
+ @param aIndex The position of the string descriptor in the string descriptor array.
+ @param aThread A pointer to the thread the LDD requesting the string is running in.
+ @param aString A reference to a buffer into which the requested string should be written (most likely
+ located user-side).
+
+ @return KErrNone if successful, KErrNotFound if no string descriptor exists at the specified index, or the
+ return value of the thread write operation, Kern::ThreadWrite(), when writing to the target buffer.
+*/
+EXPORT_C TInt DUsbClientController::GetStringDescriptor(DThread* aThread, TUint8 aIndex, TDes8& aString)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::GetStringDescriptor(%d)", aIndex));
+ return iDescriptors.GetStringDescriptorTC(aThread, aIndex, aString);
+ }
+
+
+/** Sets the aString argument to be a string descriptor at the specified index in the string
+ descriptor array. If a string descriptor already exists at that position then it will be replaced.
+
+ @param aIndex The position of the string descriptor in the string descriptor array.
+ @param aThread A pointer to the thread the LDD requesting the setting of the string is running in.
+ @param aString A reference to a buffer which contains the string to be set (most likely located
+ user-side).
+
+ @return KErrNone if successful, KErrArgument if aIndex is invalid, KErrNoMemory if no memory is available
+ to store the new string (an existing descriptor at that index will be preserved), or the return value of
+ the thread read operation, Kern::ThreadRead(), if reading from the source buffer goes wrong.
+*/
+EXPORT_C TInt DUsbClientController::SetStringDescriptor(DThread* aThread, TUint8 aIndex, const TDes8& aString)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetStringDescriptor(%d)", aIndex));
+ return iDescriptors.SetStringDescriptorTC(aThread, aIndex, aString);
+ }
+
+
+/** Removes (deletes) the string descriptor at the specified index in the string descriptor array.
+
+ @param aIndex The position of the string descriptor in the string descriptor array.
+
+ @return KErrNone if successful, KErrNotFound if no string descriptor exists at the specified index.
+*/
+EXPORT_C TInt DUsbClientController::RemoveStringDescriptor(TUint8 aIndex)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::RemoveStringDescriptor(%d)", aIndex));
+ return iDescriptors.RemoveStringDescriptor(aIndex);
+ }
+
+
+/** Queries the use of and endpoint resource.
+
+ If the resource gets successfully allocated, it will be used from when the current bus transfer
+ has been completed.
+
+ @param aClientId A pointer to the LDD querying the endpoint resource.
+ @param aEndpointNum The number of the endpoint.
+ @param aResource The endpoint resource to be queried.
+
+ @return ETrue if the specified resource is in use at the endpoint, EFalse if not or if there was any error
+ during the execution of the function.
+*/
+EXPORT_C TBool DUsbClientController::QueryEndpointResource(const DBase* /*aClientId*/, TInt aEndpointNum,
+ TUsbcEndpointResource aResource)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::QueryEndpointResource()"));
+ return iController.QueryEndpointResource(aEndpointNum, aResource);
+ }
+
+
+EXPORT_C TInt DUsbClientController::EndpointPacketSize(const DBase* aClientId, TInt aEndpointNum)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::EndpointPacketSize(0x%08x, %d)",
+ aClientId, aEndpointNum));
+
+ const TUsbcInterfaceSet* const ifcset_ptr = ClientId2InterfacePointer(aClientId);
+ if (!ifcset_ptr)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: interface or clientid not found"));
+ return -1;
+ }
+ const TUsbcInterface* const ifc_ptr = ifcset_ptr->iInterfaces[ifcset_ptr->iCurrentInterface];
+ const RPointerArray<TUsbcLogicalEndpoint>& ep_array = ifc_ptr->iEndpoints;
+ const TInt n = ep_array.Count();
+ for (TInt i = 0; i < n; i++)
+ {
+ const TUsbcLogicalEndpoint* const ep = ep_array[i];
+ if (EpAddr2Idx(ep->iPEndpoint->iEndpointAddr) == static_cast<TUint>(aEndpointNum))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Endpoint packet sizes: FS = %d HS = %d",
+ ep->iEpSize_Fs, ep->iEpSize_Hs));
+ const TInt size = iHighSpeed ? ep->iEpSize_Hs : ep->iEpSize_Fs;
+ __KTRACE_OPT(KUSB, Kern::Printf(" Returning %d", size));
+ return size;
+ }
+ }
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: endpoint not found"));
+ return -1;
+ }
+
+EXPORT_C TDfcQue* DUsbClientController::DfcQ(TInt /*aIndex*/)
+ {
+ return iControllerProperties.iDfcQueue;
+ }
+
+EXPORT_C void DUsbClientController::DumpRegisters()
+ {
+ return;
+ }
+
+EXPORT_C TInt DUsbClientController::SignalRemoteWakeup()
+ {
+ return iController.SignalRemoteWakeup();
+ }
+
+EXPORT_C TBool DUsbClientController::CurrentlyUsingHighSpeed()
+ {
+ UsbShai::TSpeed speed = iController.DeviceOperatingSpeed();
+
+ return (speed == UsbShai::EHighSpeed)?ETrue:EFalse;
+ }
+
+//
+// === USB Controller member function implementations - PSL API (public) ===========================
+//
+
+/** Gets called by the PSL to register a newly created derived class controller object.
+
+ @param aUdc The number of the new UDC. It should be 0 for the first (or only) UDC in the system, 1 for the
+ second one, and so forth. KUsbcMaxUdcs determines how many UDCs are supported.
+
+ @return A pointer to the controller if successfully registered, NULL if aUdc out of (static) range.
+
+ @publishedPartner @released
+*/
+TInt DUsbClientController::RegisterUdc(TInt aUdc)
+ {
+ TInt err = KErrNone;
+
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::RegisterUdc()"));
+
+ if (aUdc < 0 || aUdc > (KUsbcMaxUdcs - 1))
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: aUdc out of range (%d)", aUdc));
+ return KErrInUse;
+ }
+ else
+ {
+ UsbClientController[aUdc] = this;
+ }
+
+ return err;
+ }
+
+
+//
+// === USB Controller member function implementations - PSL API (protected) ========================
+//
+
+/** Initialises an instance of this class, which is the base class of the derived class (= PSL, which is
+ supposed to call this function).
+
+ It does the following things:
+
+ - disconnects the UDC from the bus,
+ - initialises the USB descriptor pool, uses data from the PSL (see function argument list)
+ - creates and initialises the basic USB device configuration
+ - initialises the array of physical endpoints
+ - initialises Ep0 structures (but doesn't configure & enable Ep0 yet)
+ - creates and installs the USB power handler
+
+ @param aDeviceDesc A pointer to a valid standard USB device descriptor or NULL. The values initially
+ required in the descriptor follow from its constructor. The descriptor is not copied over, but rather this
+ pointer is queued directly into the descriptor pool. Must be writable memory.
+
+ @param aConfigDesc A pointer to a valid standard USB configuration descriptor or NULL. The values
+ initially required in the descriptor follow from its constructor. The descriptor is not copied over, but
+ rather this pointer is queued directly into the descriptor pool. Must be writable memory.
+
+ @param aLangId A pointer to a valid USB language ID (string) descriptor. The values initially required in
+ the descriptor follow from its constructor. The descriptor is not copied over, but rather this pointer is
+ queued directly into the descriptor pool. Must be writable memory. Other than the remaining four string
+ descriptors, this one is not optional. The reason is that the USB spec mandates a LangId descriptor as
+ soon as a single string descriptor gets returned by the device. So, even though the device might omit the
+ Manufacturer, Product, SerialNumber, and Configuration string descriptors, it is at this point not known
+ whether there will be any Interface string descriptors. Since any USB API user can create an interface
+ with an Interface string descriptor, we have to insist here on the provision of a LangId string
+ descriptor. (The PIL decides at run-time whether or not to return the LangId string descriptor to the
+ host, depending on whether there exist any string descriptors at that time.)
+
+ @param aManufacturer A pointer to a valid USB string descriptor or NULL. The values initially required in
+ the descriptor follow from its constructor. The descriptor is not copied over, but rather this pointer is
+ queued directly into the descriptor pool. Must be writable memory. This descriptor will be referenced by
+ the iManufacturer field in the device descriptor.
+
+ @param aProduct A pointer to a valid USB string descriptor or NULL. The values initially required in the
+ descriptor follow from its constructor. The descriptor is not copied over, but rather this pointer is
+ queued directly into the descriptor pool. Must be writable memory. This descriptor will be referenced by
+ the iProduct field in the device descriptor.
+
+ @param aSerialNum A pointer to a valid USB string descriptor or NULL. The values initially required in the
+ descriptor follow from its constructor. The descriptor is not copied over, but rather this pointer is
+ queued directly into the descriptor pool. Must be writable memory. This descriptor will be referenced by
+ the iSerialNumber field in the device descriptor.
+
+ @param aConfig A pointer to a valid USB string descriptor or NULL. The values initially required in the
+ descriptor follow from its constructor. The descriptor is not copied over, but rather this pointer is
+ queued directly into the descriptor pool. Must be writable memory. This descriptor will be referenced by
+ the iConfiguration field in the configuration descriptor.
+
+ @param aOtgDesc A pointer to a valid USB OTG descriptor (if OTG is supported by this device and is to be
+ supported by the driver) or NULL. The values initially required in the descriptor follow from its
+ constructor. The descriptor is not copied over, but rather this pointer is queued directly into the
+ descriptor pool. Must be writable memory.
+
+ @return EFalse, if USB descriptor pool initialisation fails, or if configuration creation fails, or if the
+ PSL reports more endpoints than the constant KUsbcMaxEndpoints permits, or if the Ep0 logical endpoint
+ creation fails, or if the creation of the power handler fails; ETrue, if base class object successfully
+ initialised.
+
+ @publishedPartner @released
+*/
+TBool DUsbClientController::Initialise(TUsbPeripheralDescriptorPool& aDescPool,
+ const UsbShai::TUsbPeripheralEndpointCaps* aEndpointCaps,
+ TInt aTotalEndpoints)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::InitialiseBaseClass()"));
+
+ // We don't want the host to see us (at least not yet):
+ UsbDisconnect();
+
+ iDeviceTotalEndpoints = aTotalEndpoints;
+
+ // Initialise USB descriptor pool
+ if (iDescriptors.Init(aDescPool.iDeviceDesc,
+ aDescPool.iConfigDesc,
+ aDescPool.iLangId,
+ aDescPool.iManufacturer,
+ aDescPool.iProduct,
+ aDescPool.iSerialNum,
+ aDescPool.iConfig,
+ aDescPool.iOtgDesc) != KErrNone)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Error: Descriptor initialization failed"));
+ return EFalse;
+ }
+
+ if (aDescPool.iOtgDesc)
+ {
+ iOtgSupport = ETrue;
+ iOtgFuncMap = aDescPool.iOtgDesc->DescriptorData()[2];
+ }
+
+ // Some member variables
+ iSelfPowered = aDescPool.iConfigDesc->Byte(7) & (1 << 6); // Byte 7: bmAttributes
+ iRemoteWakeup = aDescPool.iConfigDesc->Byte(7) & (1 << 5);
+
+ if (iControllerProperties.iControllerCaps & UsbShai::KDevCapHighSpeed)
+ {
+ if (iDescriptors.InitHs() != KErrNone)
+ {
+ return EFalse;
+ }
+ }
+
+ // Create and initialise our first (and only) configuration
+ TUsbcConfiguration* config = new TUsbcConfiguration(1);
+ if (!config)
+ {
+ return EFalse;
+ }
+ iConfigs.Append(config);
+
+ // Initialise the array of physical endpoints
+ __KTRACE_OPT(KUSB, Kern::Printf(" DeviceTotalEndpoints: %d", aTotalEndpoints));
+
+ // KUsbcMaxEndpoints doesn't include ep 0
+ if ((aTotalEndpoints > (KUsbcMaxEndpoints + 2)) ||
+ ((aTotalEndpoints * sizeof(TUsbcPhysicalEndpoint)) > sizeof(iRealEndpoints)))
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: too many endpoints! (change KUsbcMaxEndpoints: %d)",
+ KUsbcMaxEndpoints));
+ return EFalse;
+ }
+
+ for (TInt i = 0; i < aTotalEndpoints; ++i)
+ {
+ iRealEndpoints[i].iEndpointAddr = EpIdx2Addr(i);
+
+ __KTRACE_OPT(KUSB, Kern::Printf(" aEndpointCaps[%02d] - iTypes: 0x%08x iSizes: 0x%08x",
+ i, aEndpointCaps[i].iTypesAndDir, aEndpointCaps[i].iSizes));
+
+ iRealEndpoints[i].iCaps = aEndpointCaps[i];
+
+ // Reset revered bytes to zero
+ iRealEndpoints[i].iCaps.iReserved[0] = 0;
+ iRealEndpoints[i].iCaps.iReserved[1] = 0;
+
+ if ((i > 1) && (aEndpointCaps[i].iTypesAndDir != UsbShai::KUsbEpNotAvailable))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" --> UsableEndpoint: #%d", i));
+ iDeviceUsableEndpoints++;
+ }
+ }
+
+ // Initialise Ep0 structures (logical endpoints are numbered 1..KMaxEndpointsPerClient,
+ // and virtual 0 is real 0):
+ // -- Ep0 OUT
+ iEp0MaxPacketSize = MaxEndpointPacketSize(aEndpointCaps[0].iSizes);
+ __KTRACE_OPT(KUSB, Kern::Printf(" using Ep0 maxpacketsize of %d bytes", iEp0MaxPacketSize));
+
+ TUsbcEndpointInfo info(UsbShai::KUsbEpTypeControl, UsbShai::KUsbEpDirOut, 0);
+ TUsbcLogicalEndpoint* ep = NULL;
+
+ info.iSize = iEp0MaxPacketSize;
+ ep = new TUsbcLogicalEndpoint(this, 0, info, NULL, &iRealEndpoints[KEp0_Out]);
+ if (!ep)
+ {
+ return EFalse;
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf(" creating ep: mapping real ep %d --> logical ep 0", KEp0_Out));
+ iRealEndpoints[KEp0_Out].iLEndpoint = ep;
+
+ // -- Ep0 IN
+ info.iDir = UsbShai::KUsbEpDirIn;
+ ep = new TUsbcLogicalEndpoint(this, 0, info, NULL, &iRealEndpoints[KEp0_In]);
+ if (!ep)
+ {
+ delete iRealEndpoints[KEp0_Out].iLEndpoint;
+ iRealEndpoints[KEp0_Out].iLEndpoint = NULL;
+ return EFalse;
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf(" creating ep: mapping real ep %d --> logical ep 0", KEp0_In));
+ iRealEndpoints[KEp0_In].iLEndpoint = ep;
+
+ iPowerHandler = new DUsbcPowerHandler(this);
+ if (!iPowerHandler)
+ {
+ delete iRealEndpoints[KEp0_Out].iLEndpoint;
+ iRealEndpoints[KEp0_Out].iLEndpoint = NULL;
+ delete iRealEndpoints[KEp0_In].iLEndpoint;
+ iRealEndpoints[KEp0_In].iLEndpoint = NULL;
+ return EFalse;
+ }
+ iPowerHandler->Add();
+
+ return ETrue;
+ }
+
+/** The standard constructor for this class.
+
+ @publishedPartner @released
+ */
+DUsbClientController::DUsbClientController(UsbShai::MPeripheralControllerIf& aPeripheralControllerIf,
+ const UsbShai::TPeripheralControllerProperties& aProperties,
+ TBool aIsOtgPort)
+ : iEp0ReceivedNonStdRequest(EFalse),
+ iRmWakeupStatus_Enabled(EFalse),
+ iEp0_RxBuf(),
+ iDeviceTotalEndpoints(0),
+ iDeviceUsableEndpoints(0),
+ iDeviceState(UsbShai::EUsbPeripheralStateUndefined),
+ iDeviceStateB4Suspend(UsbShai::EUsbPeripheralStateUndefined),
+ iSelfPowered(EFalse),
+ iRemoteWakeup(EFalse),
+ iHardwareActivated(EFalse),
+ iOtgSupport(EFalse),
+ iOtgFuncMap(0),
+ iHighSpeed(EFalse),
+ iEp0MaxPacketSize(0),
+ iEp0ClientId(NULL),
+ iEp0DataReceived(0),
+ iEp0WritePending(EFalse),
+ iEp0ClientDataTransmitting(EFalse),
+ iEp0DeviceControl(NULL),
+ iDescriptors(iEp0_TxBuf),
+ iCurrentConfig(0),
+ iConfigs(1),
+ iRealEndpoints(),
+ iEp0_TxBuf(),
+ iEp0_RxExtraCount(0),
+ iEp0_TxNonStdCount(0),
+ iEp0ReadRequestCallbacks(_FOFF(TUsbcRequestCallback, iLink)),
+ iClientCallbacks(_FOFF(TUsbcClientCallback, iLink)),
+ iStatusCallbacks(_FOFF(TUsbcStatusCallback, iLink)),
+ iEpStatusCallbacks(_FOFF(TUsbcEndpointStatusCallback, iLink)),
+ iOtgCallbacks(_FOFF(TUsbcOtgFeatureCallback, iLink)),
+ iReconnectTimer(ReconnectTimerCallback, this),
+ iUsbLock(TSpinLock::EOrderGenericIrqLow3),
+ iController(aPeripheralControllerIf),
+ iControllerProperties(aProperties),
+ iIsOtgPort(aIsOtgPort),
+ iOtgObserver(NULL),
+ iConTransferMgr(NULL),
+ iLastError(EFalse),
+ iSetupPacketPending(EFalse),
+ iCommonDfcQThread(NULL),
+ iPowerUpDfc(PowerUpDfc, this, 3),
+ iPowerDownDfc(PowerDownDfc, this, 3),
+ iDeviceEventNotifyDfc(DeviceEventNotifyDfc,this,3),
+ iThreadContextFinder(ThreadContextFinderDfc,this,3),
+ iStandby(EFalse),
+ iStackIsActive(EFalse),
+ iClientSupportReady(EFalse),
+ iUsbResetDeferred(EFalse),
+ iEnablePullUpOnDPlus(NULL),
+ iDisablePullUpOnDPlus(NULL),
+ iOtgContext(NULL)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DUsbClientController()"));
+
+ iLastError = KErrNone;
+
+#ifndef SEPARATE_USB_DFC_QUEUE
+ iPowerUpDfc.SetDfcQ(Kern::DfcQue0());
+ iPowerDownDfc.SetDfcQ(Kern::DfcQue0());
+#endif // SEPARATE_USB_DFC_QUEUE
+
+ for (TInt i = 0; i < KUsbcEpArraySize; i++)
+ iRequestCallbacks[i] = NULL;
+ }
+
+TInt DUsbClientController::Construct()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::Construct"));
+
+ // Setup the state machines of ep0
+ TInt err = SetupEp0StateMachine();
+ if( err != KErrNone)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Can not setup state machines, exit"));
+ return err;
+ }
+
+#ifdef SEPARATE_USB_DFC_QUEUE
+ iPowerUpDfc.SetDfcQ(iControllerProperties.iDfcQueue);
+ iPowerDownDfc.SetDfcQ(iControllerProperties.iDfcQueue);
+#endif // SEPARATE_USB_DFC_QUEUE
+
+ iDeviceEventNotifyDfc.SetDfcQ(iControllerProperties.iDfcQueue);
+ iThreadContextFinder.SetDfcQ(iControllerProperties.iDfcQueue);
+
+ // Register
+ if( RegisterUdc(0) != KErrNone)
+ {
+ // This is the only reason.
+ return KErrInUse;
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf(" peripheral controller registered"));
+ TUsbPeripheralDescriptorPool descPool;
+
+ if( CreateDescriptors(descPool) == KErrNone)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" descriptors created"));
+
+ // Initialise the array of physical endpoints
+ __KTRACE_OPT(KUSB, Kern::Printf(" initialising PIL "));
+ TBool initOk = Initialise(descPool,
+ iControllerProperties.iDeviceEndpointCaps,
+ iControllerProperties.iDeviceTotalEndpoints);
+
+ // Let UDC has a changes to know the callback interface is ready.
+ // Any further initialization/startup/preparation etc can be performed now.
+ if ( initOk )
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Initializing PSL "));
+
+ // Set Rx buffer for endpoint zero
+ iController.SetEp0RxBuffer(iEp0_RxBuf,KUsbcBufSzControl);
+
+ // Set pil callback interface for PSL.
+ iController.SetPilCallbackInterface(*this);
+
+ }
+ else
+ {
+ return KErrNoMemory;
+ }
+ }
+
+ // Register ourself as the ONLY one client of charger detection observer
+ gChargerObsever = this;
+
+ // In case the charger detector already registered, start monitor
+ // Charger type notifications
+ if( gChargerDetector != NULL )
+ {
+ gChargerDetector->SetChargerDetectorObserver(*gChargerObsever);
+ }
+
+ iThreadContextFinder.Enque();
+
+ return KErrNone;
+ }
+
+// This function doesn't consider the situation of OOM.
+// Because, this function will be call during extension's entry point,
+// There is no way to start up phone successfully if anything failed anyway...
+TInt DUsbClientController::SetupEp0StateMachine()
+ {
+ // Create the state machine first
+ __ASSERT_DEBUG((iConTransferMgr == NULL), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ iConTransferMgr = new DControlTransferManager(*this);
+ if(iConTransferMgr == 0)
+ {
+ return KErrNoMemory;
+ }
+
+ // Add UsbShai::EControlTransferStageSetup stage machine
+ TControlStageSm* stageSm = new DSetupStageSm(*iConTransferMgr);
+ __ASSERT_DEBUG((stageSm != NULL), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ if(stageSm != NULL)
+ {
+ iConTransferMgr->AddState(UsbShai::EControlTransferStageSetup,*stageSm);
+ }
+ else
+ {
+ return KErrNoMemory;
+ }
+
+ // Add EControlTransferStageDataOut stage state machine
+ stageSm = new DDataOutStageSm(*iConTransferMgr);
+ __ASSERT_DEBUG((stageSm != NULL), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ if(stageSm != NULL)
+ {
+ iConTransferMgr->AddState(UsbShai::EControlTransferStageDataOut,*stageSm);
+ }
+ else
+ {
+ // we don't need bother to delete the previous allocated memory
+ // system can not bootup if we return error
+ return KErrNoMemory;
+ }
+
+ // Add EControlTransferStageStatusIn stage state machine
+ stageSm = new DStatusInStageSm(*iConTransferMgr);
+ __ASSERT_DEBUG((stageSm != NULL), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ if(stageSm != NULL)
+ {
+ iConTransferMgr->AddState(UsbShai::EControlTransferStageStatusIn,*stageSm);
+ }
+ else
+ {
+ return KErrNoMemory;
+ }
+
+ // Add EControlTransferStageDataIn stage state machine
+ stageSm = new DDataInStageSm(*iConTransferMgr);
+ __ASSERT_DEBUG((stageSm != NULL), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ if(stageSm != NULL)
+ {
+ iConTransferMgr->AddState(UsbShai::EControlTransferStageDataIn,*stageSm);
+ }
+ else
+ {
+ return KErrNoMemory;
+ }
+
+ // Add EControlTransferStageStatusOut stage state machine
+ stageSm = new DStatusOutStageSm(*iConTransferMgr);
+ __ASSERT_DEBUG((stageSm != NULL), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ if(stageSm != NULL)
+ {
+ iConTransferMgr->AddState(UsbShai::EControlTransferStageStatusOut,*stageSm);
+ }
+ else
+ {
+ return KErrNoMemory;
+ }
+
+ return KErrNone;
+ }
+
+// ---------------------------------------------------------------------------
+// From MUsbPeripheralPilCallbackIf.
+// Enable the peripheral stack
+// ---------------------------------------------------------------------------
+//
+void DUsbClientController::EnablePeripheralStack()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::EnablePeripheralStack"));
+
+ if (iStackIsActive)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Already enabled - returning"));
+ return;
+ }
+
+ // Mark stack is enabled, Waiting upper application to power controller
+ // Anyway, this will lead us to attached state
+ iStackIsActive = ETrue;
+ NextDeviceState(UsbShai::EUsbPeripheralStateAttached);
+
+ // If hardware is not activated yet, do it here.
+ if(iClientSupportReady && !iHardwareActivated)
+ {
+ // PowerUpUdc only do Activating Hardware when there are at least 1
+ // Iterface registered.
+ PowerUpUdc();
+ }
+
+ }
+
+
+// ---------------------------------------------------------------------------
+// From MUsbPeripheralPilCallbackIf.
+// Disable the peripheral stack
+// ---------------------------------------------------------------------------
+//
+void DUsbClientController::DisablePeripheralStack()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DisablePeripheralStack"));
+
+ if (!iStackIsActive)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Already disabled - returning"));
+ return;
+ }
+
+ // Reset OTG features, leave attributes as is (just as in USB Reset case)
+ // (OTG spec 1.3 sections 6.5.x all say "... on a bus reset or at the end
+ // of a session." VBus drop is the end of a session.)
+ iOtgFuncMap &= KUsbOtgAttr_SrpSupp | KUsbOtgAttr_HnpSupp;
+ OtgFeaturesNotify();
+ // Tear down the current configuration (if any)
+ ChangeConfiguration(0);
+
+ if (iDeviceState != UsbShai::EUsbPeripheralStateUndefined)
+ {
+ // Not being in state UNDEFINED implies that the cable is inserted.
+ if (iHardwareActivated)
+ {
+ NextDeviceState(UsbShai::EUsbPeripheralStatePowered);
+ }
+ // (If the hardware is NOT activated at this point, we can only be in
+ // state UsbShai::EUsbPeripheralStateAttached, so we don't have to move to it.)
+ }
+ DeActivateHardwareController(); // turn off UDC altogether
+ iStackIsActive = EFalse;
+ // Notify registered clients on the user side about a USB device state
+ // change event and a transition to the "Undefined" state.
+ // Note: the state should be changed to "Undefined" before calling RunClientCallbacks(),
+ // otherwise the "Undefined" state will probably be lost.
+ NextDeviceState(UsbShai::EUsbPeripheralStateUndefined);
+ // Complete all pending requests, returning KErrDisconnected
+ RunClientCallbacks();
+ }
+
+
+// ---------------------------------------------------------------------------
+// From MUsbPeripheralPilCallbackIf.
+// Set the OTG Observer
+// ---------------------------------------------------------------------------
+//
+void DUsbClientController::SetOtgObserver(MUsbOtgPeripheralObserverIf* aObserver)
+ {
+ iOtgObserver = aObserver;
+ }
+
+
+/** This function gets called by the PSL upon detection of either of the following events:
+ - USB Reset,
+ - USB Suspend event,
+ - USB Resume signalling,
+ - The USB cable has been attached (inserted) or detached (removed).
+
+ @param anEvent An enum denoting the event that has occured.
+
+ @return KErrArgument if the event is not recognized, otherwise KErrNone.
+
+ @publishedPartner @released
+*/
+TInt DUsbClientController::DeviceEventNotification(UsbShai::TUsbPeripheralEvent anEvent)
+ {
+ TInt err = KErrNone;
+
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeviceEventNotification(anEvent=%d)", anEvent));
+
+ switch (anEvent)
+ {
+ case UsbShai::EUsbEventSuspend:
+ case UsbShai::EUsbEventResume:
+ case UsbShai::EUsbEventReset:
+ case UsbShai::EUsbEventVbusRisen:
+ case UsbShai::EUsbEventVbusFallen:
+ {
+ TInt nkern_curr_ctx= NKern::CurrentContext();
+
+ if( (nkern_curr_ctx != NKern::EInterrupt) && (nkern_curr_ctx != NKern::EIDFC))
+ {
+ // Normal context
+ __ASSERT_DEBUG((iCommonDfcQThread != NULL), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ if(iCommonDfcQThread == &(Kern::CurrentThread().iNThread))
+ {
+ // we already in the correct context, just run processes here directly.
+ __KTRACE_OPT(KUSB, Kern::Printf(" Correct thread context"));
+ ProcessDeviceEventNotification(anEvent);
+ }
+ else
+ {
+ // we're in a normal thread, but it is not the same as the DfcQ context
+ // passed by PSL, queue it
+ __KTRACE_OPT(KUSB, Kern::Printf(" Incorrect thread context"));
+ iDevEventQueue.FifoAdd(anEvent);
+ iDeviceEventNotifyDfc.Enque();
+ }
+ }
+ else
+ {
+ // We're in a ISR or IDFC context
+ __KTRACE_OPT(KUSB, Kern::Printf(" ISR|IDFC context"));
+ iDevEventQueue.FifoAdd(anEvent);
+ iDeviceEventNotifyDfc.Add();
+ }
+ }
+ break;
+
+ default:
+ err = KErrArgument;
+ }
+
+ return err;
+ }
+
+
+/** This function gets called by the PSL upon completion of a pending data transfer request.
+
+ This function is not to be used for endpoint zero completions (use Ep0RequestComplete instead).
+
+ @param aCallback A pointer to a data transfer request callback structure which was previously passed to
+ the PSL in a SetupReadBuffer() or SetupWriteBuffer() call.
+
+ @publishedPartner @released
+*/
+void DUsbClientController::EndpointRequestComplete(UsbShai::TUsbPeripheralRequest* aCallback)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::EndpointRequestComplete(%p)", aCallback));
+
+ TUsbcRequestCallback* cb = static_cast<TUsbcRequestCallback*>(aCallback);
+ // This function may be called by the PSL from within an ISR -- so we have
+ // to take care what we do here (and also in all functions that get called
+ // from here).
+
+ // We don't test aCallback for NULL here (and therefore risk a crash)
+ // because the PSL should never give us a NULL argument. If it does it
+ // means the PSL is buggy and ought to be fixed.
+ ProcessDataTransferDone(*cb);
+ }
+
+
+/** This function should be called by the PSL after reception of an Ep0
+ SET_FEATURE request with a feature selector of either {b_hnp_enable,
+ a_hnp_support, a_alt_hnp_support}, but only when that Setup packet is not
+ handed up to the PIL (for instance because it is auto-decoded and
+ 'swallowed' by the UDC hardware).
+
+ @param aHnpState A bitmask indicating the present state of the three OTG
+ feature selectors as follows:
+
+ bit.0 == a_alt_hnp_support
+ bit.1 == a_hnp_support
+ bit.2 == b_hnp_enable
+
+ @see DUsbClientController::ProcessSetClearDevFeature()
+
+ @publishedPartner @released
+*/
+void DUsbClientController::HandleHnpRequest(TInt aHnpState)
+// This function is called by the PSL from within an ISR -- so we have to take care what we do here
+// (and also in all functions that get called from here).
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::HandleHnpRequest(%d)", aHnpState));
+
+ if (!iOtgSupport)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Request only supported on a OTG device"));
+ return;
+ }
+ if (!(iOtgFuncMap & KUsbOtgAttr_HnpSupp))
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Request only valid if OTG device supports HNP"));
+ return;
+ }
+ // (case KUsbFeature_B_HnpEnable:)
+ if (aHnpState & 0x04)
+ {
+ iOtgFuncMap |= KUsbOtgAttr_B_HnpEnable;
+ }
+ // (case KUsbFeature_A_HnpSupport:)
+ if (aHnpState & 0x02)
+ {
+ iOtgFuncMap |= KUsbOtgAttr_A_HnpSupport;
+ }
+ // (case KUsbFeature_A_AltHnpSupport:)
+ if (aHnpState & 0x01)
+ {
+ iOtgFuncMap |= KUsbOtgAttr_A_AltHnpSupport;
+ }
+ OtgFeaturesNotify();
+ }
+
+void DUsbClientController::GetEp0RxBufferInfo(TUint8*& aBuffer, TInt& aBufferLen)
+ {
+ aBuffer = iEp0_RxBuf;
+ aBufferLen = KUsbcBufSzControl;
+ }
+
+UsbShai::TUsbPeripheralState DUsbClientController::DeviceStatus() const
+ {
+ return iDeviceState;
+ }
+
+TBool DUsbClientController::Ep0ReceivedNonStdRequest()
+ {
+ return iEp0ReceivedNonStdRequest;
+ }
+
+/** This function gets called by the PSL upon completion of a pending endpoint zero data transfer request.
+
+ @param aRealEndpoint Either 0 for Ep0 OUT (= Read), or 1 for Ep0 IN (= Write).
+ @param aCount The number of bytes received or transmitted, respectively.
+ @param aError The error status of the completed transfer request. Can be KErrNone if no error, KErrCancel
+ if transfer was cancelled, or KErrPrematureEnd if a premature status end was encountered.
+
+ @return KErrNone if no error during transfer completion processing, KErrGeneral if the request was a read &
+ a Setup packet was received & the recipient for that packet couldn't be found (invalid packet: Ep0 has been
+ stalled), KErrNotFound if the request was a read & the recipient for that packet (Setup or data) _was_
+ found - however no read had been set up by that recipient (this case should be used by the PSL to disable
+ the Ep0 interrupt at that point and give the LDD time to set up a new Ep0 read; once the 'missing' read
+ was set up either Ep0ReceiveProceed or Ep0ReadSetupPktProceed will be called by the PIL).
+
+ @publishedPartner @released
+*/
+TInt DUsbClientController::Ep0RequestComplete(TInt aRealEndpoint,
+ TInt aCount,
+ TInt aError,
+ UsbShai::TControlPacketType aPktType)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::Ep0RequestComplete(%d)", aRealEndpoint));
+
+ iLastError = KErrNone;
+
+ iConTransferMgr->Ep0RequestComplete(iEp0_RxBuf,aCount,aError,aPktType);
+
+ __KTRACE_OPT(KUSB, Kern::Printf(" iLastError(%d)", iLastError));
+
+ if(iEp0WritePending == EFalse)
+ {
+ iConTransferMgr->SetupEndpointZeroRead();
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::Ep0RequestComplete"));
+ return iLastError;
+ }
+
+/** This function should be called by the PSL once the UDC (and thus the USB device) is in the Address state.
+
+ @publishedPartner @released
+*/
+void DUsbClientController::MoveToAddressState()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::MoveToAddressState()"));
+
+ // This function may be called by the PSL from within an ISR -- so we have
+ // to take care what we do here (and also in all functions that get called
+ // from here).
+
+ NextDeviceState(UsbShai::EUsbPeripheralStateAddress);
+ }
+
+
+TBool DUsbClientController::CreateDescriptors(TUsbPeripheralDescriptorPool& aOutput)
+ {
+ TInt errCode = KErrNone;
+
+ // Create all the string descriptors
+ TUsbcDeviceDescriptor* deviceDesc = TUsbcDeviceDescriptor::New(
+ 0, // aDeviceClass, will be changed later by upper app
+ 0, // aDeviceSubClass, will be changed later by upper app
+ 0, // aDeviceProtocol, will be changed later by upper app
+ iControllerProperties.iMaxEp0Size , // aMaxPacketSize0
+ KUsbVendorId, // aVendorId
+ KUsbProductId , // aProductId
+ iControllerProperties.iDeviceRelease, // aDeviceRelease
+ KUsbNumberOfConfiguration);// aNumConfigurations
+ __ASSERT_DEBUG( (deviceDesc != NULL), Kern::Fault( "USB PSL Out of memory, deviceDesc", __LINE__ ));
+
+ TUsbcConfigDescriptor* configDesc = TUsbcConfigDescriptor::New(
+ 1, // Only one configruation is supported current.
+ EFalse, // at here, we always mark it as bus powered.
+ (iControllerProperties.iControllerCaps & UsbShai::KDevCapRemoteWakeupSupport)?ETrue:EFalse, // remote wakeup
+ 100); // 100 is a default value, thise value will be changed by
+
+ __ASSERT_DEBUG( (configDesc != NULL), Kern::Fault( "USB PSL Out of memory, configDesc", __LINE__ ));
+
+ TUsbcLangIdDescriptor* stringDescLang = TUsbcLangIdDescriptor::New(KUsbLangId);
+ __ASSERT_DEBUG( (stringDescLang != NULL), Kern::Fault( "USB PSL Out of memory, stringDescLang", __LINE__ ));
+
+ // Default manufacturer string
+ TPtrC8 aString;
+ aString.Set(reinterpret_cast<const TUint8*>(KStringManufacturer), sizeof(KStringManufacturer) - 2);
+ TUsbcStringDescriptor* stringDescManu = TUsbcStringDescriptor::New(aString);
+ __ASSERT_DEBUG( (stringDescManu != NULL), Kern::Fault( "USB PSL Out of memory, stringDescManu", __LINE__ ));
+
+ // Default product name string
+ aString.Set(reinterpret_cast<const TUint8*>(KStringProduct), sizeof(KStringProduct) - 2);
+ TUsbcStringDescriptor* stringDescProd = TUsbcStringDescriptor::New(aString);
+ __ASSERT_DEBUG( (stringDescProd != NULL), Kern::Fault( "USB PSL Out of memory, stringDescProd", __LINE__ ));
+
+ // Default configuration name string
+ aString.Set(reinterpret_cast<const TUint8*>(KStringConfig), sizeof(KStringConfig) - 2);
+ TUsbcStringDescriptor* stringDescConf = TUsbcStringDescriptor::New(aString);
+ __ASSERT_DEBUG( (stringDescConf != NULL), Kern::Fault( "USB PSL Out of memory, stringDescConf", __LINE__ ));
+
+ // Default serial bumber string
+ aString.Set(reinterpret_cast<const TUint8*>(KStringSerial), sizeof(KStringSerial) - 2);
+ TUsbcStringDescriptor* stringSerial = TUsbcStringDescriptor::New(aString);
+ __ASSERT_DEBUG( (stringSerial != NULL), Kern::Fault( "USB PSL Out of memory, stringDescConf", __LINE__ ));
+
+ TUsbcOtgDescriptor* otgDesc = NULL;
+
+ // In an OTG-environment, we also need to create the OTG
+ // descriptor. The PSL supports both HNP and SRP and hence we
+ // report support for them. Upper layers will override the
+ // descriptors anyway.
+ if (iIsOtgPort)
+ {
+ TBool srpSupported = (iControllerProperties.iControllerCaps & UsbShai::KDevCapSrpSupport)?ETrue:EFalse;
+ TBool hnpSupported = (iControllerProperties.iControllerCaps & UsbShai::KDevCapHnpSupport)?ETrue:EFalse;
+
+ otgDesc = TUsbcOtgDescriptor::New(srpSupported,
+ hnpSupported);
+
+ __ASSERT_DEBUG( (otgDesc != NULL), Kern::Fault( "USB PSL Out of memory, otgDesc", __LINE__ ));
+ }
+
+ if( (deviceDesc != NULL) &&
+ (configDesc != NULL) &&
+ (stringDescLang != NULL) &&
+ (stringDescManu != NULL) &&
+ (stringDescProd != NULL) &&
+ (stringDescConf != NULL) &&
+ ((!iIsOtgPort) || (iIsOtgPort && (otgDesc != NULL))))
+ {
+ aOutput.iDeviceDesc = deviceDesc;
+ aOutput.iConfigDesc = configDesc;
+ aOutput.iLangId = stringDescLang;
+ aOutput.iManufacturer = stringDescManu;
+ aOutput.iProduct = stringDescProd;
+ aOutput.iConfig = stringDescConf;
+ aOutput.iSerialNum = stringSerial;
+ aOutput.iOtgDesc = otgDesc;
+ }
+ else
+ {
+ if( deviceDesc != NULL )
+ {
+ delete deviceDesc;
+ }
+
+ if( configDesc != NULL )
+ {
+ delete configDesc;
+ }
+
+ if( stringDescLang != NULL )
+ {
+ delete stringDescLang;
+ }
+
+ if( stringDescManu != NULL )
+ {
+ delete stringDescManu;
+ }
+
+ if( stringDescProd != NULL )
+ {
+ delete stringDescProd;
+ }
+
+ if( stringDescConf != NULL )
+ {
+ delete stringDescConf;
+ }
+
+ if( stringSerial != NULL )
+ {
+ delete stringSerial;
+ }
+
+ if( otgDesc != NULL )
+ {
+ delete otgDesc;
+ }
+
+ errCode = KErrNoMemory;
+ }
+
+ // We don't support serial number
+ aOutput.iSerialNum = NULL;
+
+ return errCode;
+ }
+
+//
+// === USB Controller member function implementations - Internal utility functions (private) =======
+//
+
+TInt DUsbClientController::DeRegisterClientCallback(const DBase* aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeRegisterClientCallback()"));
+ __ASSERT_DEBUG((aClientId != NULL), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ TSglQueIter<TUsbcClientCallback> iter(iClientCallbacks);
+ TUsbcClientCallback* p;
+ while ((p = iter++) != NULL)
+ if (p->Owner() == aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" removing ClientCallback @ 0x%x", p));
+ iClientCallbacks.Remove(*p);
+ return KErrNone;
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf(" Client not found"));
+ return KErrNotFound;
+ }
+
+
+TBool DUsbClientController::CheckEpAvailability(TInt aEndpointsUsed,
+ const TUsbcEndpointInfoArray& aEndpointData,
+ TInt aIfcNumber) const
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::CheckEpAvailability()"));
+ if (aEndpointsUsed > KMaxEndpointsPerClient)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: too many endpoints claimed (%d)", aEndpointsUsed));
+ return EFalse;
+ }
+ TBool reserve[KUsbcEpArraySize]; // iDeviceTotalEndpoints can be equal to 32
+ memset(reserve, EFalse, sizeof(reserve)); // reset the array
+ for (TInt i = 0; i < aEndpointsUsed; ++i)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" checking for (user) endpoint #%d availability...", i + 1));
+ TInt j = 2;
+ while (j < iDeviceTotalEndpoints)
+ {
+ if ((iRealEndpoints[j].EndpointSuitable(&aEndpointData[i], aIfcNumber)) &&
+ (reserve[j] == EFalse))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" ---> found suitable endpoint: RealEndpoint #%d", j));
+ reserve[j] = ETrue; // found one: mark this ep as reserved
+ break;
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf(" -> endpoint not suitable: RealEndpoint #%d", j));
+ j++;
+ }
+ if (j == iDeviceTotalEndpoints)
+ {
+ return EFalse;
+ }
+ }
+ return ETrue;
+ }
+
+
+TUsbcInterface* DUsbClientController::CreateInterface(const DBase* aClientId, TInt aIfc, TUint32 aFeatureWord)
+// We know that 9.2.3 says: "Interfaces are numbered from zero to one less than the number of
+// concurrent interfaces supported by the configuration." But since we permit the user to
+// change interface numbers, we can neither assume nor enforce anything about them here.
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::CreateInterface(x, aIfc=%d)", aIfc));
+ TUsbcInterfaceSet* ifcset_ptr = NULL;
+ TInt ifcset = ClientId2InterfaceNumber(aClientId);
+ TBool new_ifc;
+ if (ifcset < 0)
+ {
+ // New interface(set), so we need to find a number for it.
+ new_ifc = ETrue;
+ const TInt num_ifcsets = iConfigs[0]->iInterfaceSets.Count();
+ if (num_ifcsets == 255)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Too many interfaces already exist: 255"));
+ return NULL;
+ }
+ // Find the smallest interface number that has not yet been used.
+ for (ifcset = 0; ifcset < 256; ++ifcset)
+ {
+ TBool n_used = EFalse;
+ for (TInt i = 0; i < num_ifcsets; ++i)
+ {
+ if ((iConfigs[0]->iInterfaceSets[i]->iInterfaceNumber) == ifcset)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" interface number %d already used", ifcset));
+ n_used = ETrue;
+ break;
+ }
+ }
+ if (!n_used)
+ {
+ break;
+ }
+ }
+ if (ifcset == 256)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: no available interface number found"));
+ return NULL;
+ }
+ // append the ifcset
+ __KTRACE_OPT(KUSB, Kern::Printf(" creating new InterfaceSet %d first", ifcset));
+ if (aIfc != 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: invalid interface setting number (1): %d", aIfc));
+ return NULL;
+ }
+ if ((ifcset_ptr = new TUsbcInterfaceSet(aClientId, ifcset)) == NULL)
+ {
+ __KTRACE_OPT(KPANIC,
+ Kern::Printf(" Error: new TUsbcInterfaceSet(aClientId, ifcset_num) failed"));
+ return NULL;
+ }
+ iConfigs[0]->iInterfaceSets.Append(ifcset_ptr);
+ }
+ else /* if (ifcset_num >= 0) */
+ {
+ // use an existent ifcset
+ new_ifc = EFalse;
+ __KTRACE_OPT(KUSB, Kern::Printf(" using existing InterfaceSet %d", ifcset));
+ ifcset_ptr = InterfaceNumber2InterfacePointer(ifcset);
+ if (aIfc != ifcset_ptr->iInterfaces.Count())
+ {
+ // 9.2.3: "Alternate settings range from zero to one less than the number of alternate
+ // settings for a specific interface." (Thus we can here only append a setting.)
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: invalid interface setting number (2): %d", aIfc));
+ return NULL;
+ }
+ // Check whether the existing interface belongs indeed to this client
+ if (ifcset_ptr->iClientId != aClientId)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: iClientId (%p) != aClientId (%p)",
+ ifcset_ptr->iClientId, aClientId));
+ return NULL;
+ }
+ }
+ const TBool no_ep0_requests = aFeatureWord & KUsbcInterfaceInfo_NoEp0RequestsPlease;
+ TUsbcInterface* const ifc_ptr = new TUsbcInterface(ifcset_ptr, aIfc, no_ep0_requests);
+ if (!ifc_ptr)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: new TUsbcInterface(ifcset, aIfc) failed"));
+ if (new_ifc)
+ {
+ DeleteInterfaceSet(ifcset);
+ }
+ return NULL;
+ }
+ ifcset_ptr->iInterfaces.Append(ifc_ptr);
+ return ifc_ptr;
+ }
+
+
+#define RESET_SETTINGRESERVE \
+ for (TInt i = start_ep; i < iDeviceTotalEndpoints; i++) \
+ { \
+ if (iRealEndpoints[i].iSettingReserve) \
+ iRealEndpoints[i].iSettingReserve = EFalse; \
+ } \
+
+TInt DUsbClientController::CreateEndpoints(TUsbcInterface* aIfc, TInt aEndpointsUsed,
+ const TUsbcEndpointInfoArray& aEndpointData,
+ TInt aRealEpNumbers[])
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::CreateEndpoints()"));
+ const TInt ifc_num = aIfc->iInterfaceSet->iInterfaceNumber;
+ const TInt start_ep = 2;
+ for (TInt i = 0; i < aEndpointsUsed; ++i)
+ {
+ for (TInt j = start_ep; j < iDeviceTotalEndpoints; ++j)
+ {
+ if (iRealEndpoints[j].EndpointSuitable(&aEndpointData[i], ifc_num))
+ {
+ // Logical endpoints are numbered 1..KMaxEndpointsPerClient (virtual 0 is real 0 and 1)
+ TUsbcLogicalEndpoint* const ep = new TUsbcLogicalEndpoint(this, i + 1, aEndpointData[i],
+ aIfc, &iRealEndpoints[j]);
+ if (!ep)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: new TUsbcLogicalEndpoint() failed"));
+ aIfc->iEndpoints.ResetAndDestroy();
+ RESET_SETTINGRESERVE;
+ return KErrNoMemory;
+ }
+ aIfc->iEndpoints.Append(ep);
+ // Check on logical endpoint's sizes for compliance with special restrictions.
+ if (aIfc->iSettingCode == 0)
+ {
+ // For details see last paragraph of 5.7.3 "Interrupt Transfer Packet Size Constraints".
+ if ((ep->iInfo.iType == UsbShai::KUsbEpTypeInterrupt) && (ep->iEpSize_Hs > 64))
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Warning: INT ep HS size = %d on default ifc setting",
+ ep->iEpSize_Hs));
+ __KTRACE_OPT(KPANIC, Kern::Printf(" (should be <= 64)"));
+ }
+ // For details see last paragraph of 5.6.3 "Isochronous Transfer Packet Size Constraints".
+ else if ((ep->iInfo.iType == UsbShai::KUsbEpTypeIsochronous) && (ep->iInfo.iSize > 0))
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Warning: ISO ep size = %d on default ifc setting",
+ ep->iInfo.iSize));
+ __KTRACE_OPT(KPANIC, Kern::Printf(" (should be zero or ep non-existent)"));
+ }
+ }
+ // If the endpoint doesn't support DMA (now or never) the next operation
+ // will be a successful no-op.
+ /*
+ const TInt r = OpenDmaChannel(j);
+ if (r != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Opening of DMA channel failed"));
+ aIfc->iEndpoints.ResetAndDestroy();
+ RESET_SETTINGRESERVE;
+ return r;
+ }
+ */
+ __KTRACE_OPT(KUSB, Kern::Printf(" creating ep: mapping real ep %d -> logical ep %d",
+ j, i + 1));
+ iRealEndpoints[j].iIfcNumber = &aIfc->iInterfaceSet->iInterfaceNumber;
+ iRealEndpoints[j].iSettingReserve = ETrue;
+ __KTRACE_OPT(KUSB,
+ Kern::Printf(" ep->iInfo: iType=0x%x iDir=0x%x iSize=%d iInterval=%d",
+ ep->iInfo.iType, ep->iInfo.iDir, ep->iInfo.iSize,
+ ep->iInfo.iInterval));
+ __KTRACE_OPT(KUSB,
+ Kern::Printf(" ep->iInfo: iInterval_Hs=%d iTransactions=%d iExtra=%d",
+ ep->iInfo.iInterval_Hs, ep->iInfo.iTransactions,
+ ep->iInfo.iExtra));
+ // Store real endpoint numbers:
+ // array[x] holds the number for logical ep x.
+ aRealEpNumbers[i + 1] = j;
+ break;
+ }
+ }
+ }
+ aRealEpNumbers[0] = 0; // ep0: 0.
+ __KTRACE_OPT(KUSB,{
+ Kern::Printf(" Endpoint Mapping for Interface %d / Setting %d:", ifc_num, aIfc->iSettingCode);
+ Kern::Printf("Logical | Real");
+ Kern::Printf("Endpoint | Endpoint");
+ for (TInt ep = 0; ep <= aEndpointsUsed; ++ep) Kern::Printf(" %2d %3d",ep, aRealEpNumbers[ep]);
+ });
+ RESET_SETTINGRESERVE;
+ return KErrNone;
+ }
+
+
+TInt DUsbClientController::SetupIfcDescriptor(TUsbcInterface* aIfc, TUsbcClassInfo& aClass, DThread* aThread,
+ TDesC8* aString, const TUsbcEndpointInfoArray& aEndpointData)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::SetupIfcDescriptor()"));
+
+ // Interface descriptor
+ TUsbcDescriptorBase* d = TUsbcInterfaceDescriptor::New(aIfc->iInterfaceSet->iInterfaceNumber,
+ aIfc->iSettingCode,
+ aIfc->iEndpoints.Count(),
+ aClass);
+ if (!d)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Memory allocation for ifc desc failed."));
+ return KErrNoMemory;
+ }
+ iDescriptors.InsertDescriptor(d);
+
+ // Interface string descriptor
+ if (aString)
+ {
+ // we don't know the length of the string, so we have to allocate memory dynamically
+ TUint strlen = Kern::ThreadGetDesLength(aThread, aString);
+ if (strlen > KUsbStringDescStringMaxSize)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Warning: $ descriptor too long - string will be truncated"));
+ strlen = KUsbStringDescStringMaxSize;
+ }
+ HBuf8* const stringbuf = HBuf8::New(strlen);
+ if (!stringbuf)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Memory allocation for ifc $ desc string failed."));
+ iDescriptors.DeleteIfcDescriptor(aIfc->iInterfaceSet->iInterfaceNumber,
+ aIfc->iSettingCode);
+ return KErrNoMemory;
+ }
+ stringbuf->SetMax();
+ // the aString points to data that lives in user memory, so we have to copy it:
+ TInt r = Kern::ThreadDesRead(aThread, aString, *stringbuf, 0);
+ if (r != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Thread read error"));
+ iDescriptors.DeleteIfcDescriptor(aIfc->iInterfaceSet->iInterfaceNumber,
+ aIfc->iSettingCode);
+ delete stringbuf;
+ return r;
+ }
+ TUsbcStringDescriptor* const sd = TUsbcStringDescriptor::New(*stringbuf);
+ if (!sd)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Memory allocation for ifc $ desc failed."));
+ iDescriptors.DeleteIfcDescriptor(aIfc->iInterfaceSet->iInterfaceNumber,
+ aIfc->iSettingCode);
+ delete stringbuf;
+ return KErrNoMemory;
+ }
+ iDescriptors.SetIfcStringDescriptor(sd, aIfc->iInterfaceSet->iInterfaceNumber, aIfc->iSettingCode);
+ delete stringbuf; // the (EPOC) descriptor was copied by New()
+ }
+
+ // Endpoint descriptors
+ for (TInt i = 0; i < aIfc->iEndpoints.Count(); ++i)
+ {
+ // The reason for using another function argument for Endpoint Info
+ // (and not possibly - similar to the Endpoint Address -
+ // "aIfc->iEndpoints[i]->iPEndpoint->iLEndpoint->iInfo") is that this time
+ // there are no logical endpoints associated with our real endpoints,
+ // i.e. iLEndpoint is NULL!.
+ if (aEndpointData[i].iExtra)
+ {
+ // if a non-standard endpoint descriptor is requested...
+ if (aEndpointData[i].iExtra != 2)
+ {
+ // ...then it must be a Audio Class endpoint descriptor. Else...
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: EP desc extension > 2 bytes (%d)",
+ aEndpointData[i].iExtra));
+ iDescriptors.DeleteIfcDescriptor(aIfc->iInterfaceSet->iInterfaceNumber,
+ aIfc->iSettingCode);
+ return KErrArgument;
+ }
+ d = TUsbcAudioEndpointDescriptor::New(aIfc->iEndpoints[i]->iPEndpoint->iEndpointAddr,
+ aEndpointData[i]);
+ }
+ else
+ {
+ d = TUsbcEndpointDescriptor::New(aIfc->iEndpoints[i]->iPEndpoint->iEndpointAddr,
+ aEndpointData[i]);
+ }
+ if (!d)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Memory allocation for ep desc #%d failed.", i));
+ iDescriptors.DeleteIfcDescriptor(aIfc->iInterfaceSet->iInterfaceNumber,
+ aIfc->iSettingCode);
+ return KErrNoMemory;
+ }
+ iDescriptors.InsertDescriptor(d);
+ }
+
+ return KErrNone;
+ }
+
+
+TInt DUsbClientController::ClientId2InterfaceNumber(const DBase* aClientId) const
+ {
+ const TInt num_ifcsets = iConfigs[0]->iInterfaceSets.Count();
+ for (TInt i = 0; i < num_ifcsets; ++i)
+ {
+ if (iConfigs[0]->iInterfaceSets[i]->iClientId == aClientId)
+ {
+ return iConfigs[0]->iInterfaceSets[i]->iInterfaceNumber;
+ }
+ }
+ return -1;
+ }
+
+
+TUsbcInterfaceSet* DUsbClientController::ClientId2InterfacePointer(const DBase* aClientId) const
+ {
+ const TInt num_ifcsets = iConfigs[0]->iInterfaceSets.Count();
+ for (TInt i = 0; i < num_ifcsets; ++i)
+ {
+ if (iConfigs[0]->iInterfaceSets[i]->iClientId == aClientId)
+ {
+ return iConfigs[0]->iInterfaceSets[i];
+ }
+ }
+ return NULL;
+ }
+
+
+const DBase* DUsbClientController::InterfaceNumber2ClientId(TInt aIfcSet) const
+ {
+ if (!InterfaceExists(aIfcSet))
+ {
+ return NULL;
+ }
+ return InterfaceNumber2InterfacePointer(aIfcSet)->iClientId;
+ }
+
+
+TUsbcInterfaceSet* DUsbClientController::InterfaceNumber2InterfacePointer(TInt aIfcSet) const
+ {
+ const TInt num_ifcsets = iConfigs[0]->iInterfaceSets.Count();
+ for (TInt i = 0; i < num_ifcsets; ++i)
+ {
+ if ((iConfigs[0]->iInterfaceSets[i]->iInterfaceNumber) == aIfcSet)
+ {
+ return iConfigs[0]->iInterfaceSets[i];
+ }
+ }
+ return NULL;
+ }
+
+
+TInt DUsbClientController::ActivateHardwareController()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::ActivateHardwareController()"));
+
+ // iStackIsActive must be ETrue at this time
+ // the caller of this function shall checked that iStackIsActive is ETrue
+ __ASSERT_DEBUG(iStackIsActive, Kern::Fault(KUsbPILPanicCat, __LINE__));
+
+ if (iHardwareActivated)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" already active -> returning"));
+ return KErrNone;
+ }
+ // Initialise HW
+ TInt r = iController.StartPeripheralController();
+ if (r != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: StartPeripheralController() failed"));
+ return KErrHardwareNotAvailable;
+ }
+
+ iHardwareActivated = ETrue;
+
+ // Configure & enable endpoint zero
+ const TUsbcLogicalEndpoint* const ep0_0 = iRealEndpoints[0].iLEndpoint;
+ const TUsbcLogicalEndpoint* const ep0_1 = iRealEndpoints[1].iLEndpoint;
+ if (iHighSpeed)
+ {
+ const_cast<TUsbcLogicalEndpoint*>(ep0_0)->iInfo.iSize = ep0_0->iEpSize_Hs;
+ const_cast<TUsbcLogicalEndpoint*>(ep0_1)->iInfo.iSize = ep0_1->iEpSize_Hs;
+ }
+ else
+ {
+ const_cast<TUsbcLogicalEndpoint*>(ep0_0)->iInfo.iSize = ep0_0->iEpSize_Fs;
+ const_cast<TUsbcLogicalEndpoint*>(ep0_1)->iInfo.iSize = ep0_1->iEpSize_Fs;
+ }
+ iController.ConfigureEndpoint(0, ep0_0->iInfo);
+ iController.ConfigureEndpoint(1, ep0_1->iInfo);
+ iEp0MaxPacketSize = ep0_0->iInfo.iSize;
+
+ __KTRACE_OPT(KUSB, Kern::Printf(" Controller activated."));
+
+ // Controller is powered up, changes device state to powered
+ NextDeviceState(UsbShai::EUsbPeripheralStatePowered);
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::ActivateHardwareController()"));
+ return KErrNone;;
+ }
+
+
+void DUsbClientController::DeActivateHardwareController()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeActivateHardwareController()"));
+ if (!iHardwareActivated)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" not active -> returning"));
+ return;
+ }
+ // Deconfigure & disable endpoint zero
+ iController.DeConfigureEndpoint(KEp0_Out);
+ iController.DeConfigureEndpoint(KEp0_In);
+ // Stop HW
+ iController.StopPeripheralController();
+ iHardwareActivated = EFalse;
+ __KTRACE_OPT(KUSB, Kern::Printf(" Controller deactivated."));
+
+ // Always go to attached state, until statck is disabled
+ NextDeviceState(UsbShai::EUsbPeripheralStateAttached);
+
+ return;
+ }
+
+
+void DUsbClientController::DeleteInterfaceSet(TInt aIfcSet)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeleteInterfaceSet(%d)", aIfcSet));
+ TUsbcInterfaceSet* const ifcset_ptr = InterfaceNumber2InterfacePointer(aIfcSet);
+ if (!ifcset_ptr)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: invalid interface number: %d", aIfcSet));
+ return;
+ }
+ const TInt idx = iConfigs[0]->iInterfaceSets.Find(ifcset_ptr);
+ if (idx == KErrNotFound)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: interface not found in array"));
+ return;
+ }
+ //Add this mutex to protect the interface set data structure
+ if (NKern::CurrentContext() == EThread)
+ {
+ NKern::FMWait(&iMutex);
+ }
+
+ iConfigs[0]->iInterfaceSets.Remove(idx);
+ if (NKern::CurrentContext() == EThread)
+ {
+ NKern::FMSignal(&iMutex);
+ }
+ delete ifcset_ptr;
+ }
+
+
+void DUsbClientController::DeleteInterface(TInt aIfcSet, TInt aIfc)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeleteInterface(%d, %d)", aIfcSet, aIfc));
+ TUsbcInterfaceSet* const ifcset_ptr = InterfaceNumber2InterfacePointer(aIfcSet);
+ if (!ifcset_ptr)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: invalid interface number: %d", aIfcSet));
+ return;
+ }
+ if (ifcset_ptr->iInterfaces.Count() <= aIfc)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: invalid interface setting: %d", aIfc));
+ return;
+ }
+ //Add this mutex to protect the interface set data structure
+ if (NKern::CurrentContext() == EThread)
+ {
+ NKern::FMWait(&iMutex);
+ }
+ TUsbcInterface* const ifc_ptr = ifcset_ptr->iInterfaces[aIfc];
+ // Always first remove, then delete (see ~TUsbcLogicalEndpoint() for the reason why)
+ ifcset_ptr->iInterfaces.Remove(aIfc);
+
+ if (aIfc == ifcset_ptr->iCurrentInterface)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" > Warning: deleting current interface setting"));
+ ifcset_ptr->iCurrentInterface = 0;
+ }
+ if (NKern::CurrentContext() == EThread)
+ {
+ NKern::FMSignal(&iMutex);
+ }
+ delete ifc_ptr;
+ }
+
+
+void DUsbClientController::CancelTransferRequests(TInt aRealEndpoint)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::CancelTransferRequests(aRealEndpoint=%d)",
+ aRealEndpoint));
+ const DBase* const clientId = PEndpoint2ClientId(aRealEndpoint);
+ if (EpIdx2Addr(aRealEndpoint) & KUsbEpAddress_In)
+ {
+ CancelWriteBuffer(clientId, aRealEndpoint);
+ }
+ else
+ {
+ CancelReadBuffer(clientId, aRealEndpoint);
+ }
+ }
+
+
+void DUsbClientController::DeleteRequestCallback(const DBase* aClientId, TInt aEndpointNum,
+ UsbShai::TTransferDirection aTransferDir)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeleteRequestCallback()"));
+ // Ep0 OUT
+ if (aEndpointNum == 0)
+ {
+ const TInt irq = __SPIN_LOCK_IRQSAVE(iUsbLock);
+ TSglQueIter<TUsbcRequestCallback> iter(iEp0ReadRequestCallbacks);
+ TUsbcRequestCallback* p;
+ while ((p = iter++) != NULL)
+ {
+ if (p->Owner() == aClientId)
+ {
+ __ASSERT_DEBUG((p->iRealEpNum == 0), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ __ASSERT_DEBUG((p->iTransferDir == UsbShai::EControllerRead), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ __KTRACE_OPT(KUSB, Kern::Printf(" removing RequestCallback @ 0x%x (ep0)", p));
+ iEp0ReadRequestCallbacks.Remove(*p);
+ }
+ }
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ return;
+ }
+ // Other endpoints
+ TUsbcRequestCallback* const p = iRequestCallbacks[aEndpointNum];
+ if (p)
+ {
+ __ASSERT_DEBUG((p->Owner() == aClientId), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ __ASSERT_DEBUG((p->iTransferDir == aTransferDir), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ __KTRACE_OPT(KUSB, Kern::Printf(" removing RequestCallback @ 0x%x", p));
+ iRequestCallbacks[aEndpointNum] = NULL;
+ }
+ }
+
+
+void DUsbClientController::DeleteRequestCallbacks(const DBase* aClientId)
+ {
+ // aClientId being NULL means: delete all requests for *all* clients.
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::DeleteRequestCallbacks()"));
+ // Ep0 OUT
+ const TInt irq = __SPIN_LOCK_IRQSAVE(iUsbLock);
+ TSglQueIter<TUsbcRequestCallback> iter(iEp0ReadRequestCallbacks);
+ TUsbcRequestCallback* p;
+ while ((p = iter++) != NULL)
+ {
+ if (!aClientId || p->Owner() == aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" removing RequestCallback @ 0x%x (ep0)", p));
+ iEp0ReadRequestCallbacks.Remove(*p);
+ }
+ }
+ __SPIN_UNLOCK_IRQRESTORE(iUsbLock, irq);
+ // Other endpoints
+ for (TInt i = 1; i < KUsbcEpArraySize; i++)
+ {
+ TUsbcRequestCallback* const p = iRequestCallbacks[i];
+ if (p && (!aClientId || p->Owner() == aClientId))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" removing RequestCallback @ 0x%x", p));
+ iRequestCallbacks[i] = NULL;
+ }
+ }
+ }
+
+
+void DUsbClientController::StatusNotify(UsbShai::TUsbPeripheralState aState, const DBase* aClientId)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::StatusNotify()"));
+
+ // This function may be called by the PSL (via chapter9.cpp) from within an
+ // ISR -- so we have to take care what we do here (and also in all
+ // functions that get called from here).
+
+ TSglQueIter<TUsbcStatusCallback> iter(iStatusCallbacks);
+ TUsbcStatusCallback* p;
+ while ((p = iter++) != NULL)
+ {
+ if (!aClientId || aClientId == p->Owner())
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" notifying LDD @ 0x%x about %d", p->Owner(), aState));
+ p->SetState(aState);
+ p->DoCallback();
+ }
+ }
+ }
+
+
+void DUsbClientController::EpStatusNotify(TInt aRealEndpoint)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::EpStatusNotify()"));
+
+ // This function may be called by the PSL (via chapter9.cpp) from within an
+ // ISR -- so we have to take care what we do here (and also in all
+ // functions that get called from here).
+
+ const DBase* const client_id = PEndpoint2ClientId(aRealEndpoint);
+ if (!client_id)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Client not found for real ep %d", aRealEndpoint));
+ return;
+ }
+ // Check if there is a notification request queued for that client (if not, we can return here).
+ TSglQueIter<TUsbcEndpointStatusCallback> iter(iEpStatusCallbacks);
+ TUsbcEndpointStatusCallback* p;
+ while ((p = iter++) != NULL)
+ {
+ if (p->Owner() == client_id)
+ {
+ break;
+ }
+ }
+ if (!p)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" No notification request for that client, returning"));
+ return;
+ }
+ const TInt ifcset = ClientId2InterfaceNumber(client_id);
+ if (ifcset < 0)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Ifcset not found for clientid %d", client_id));
+ return;
+ }
+ const TUsbcInterfaceSet* const ifcset_ptr = InterfaceNumber2InterfacePointer(ifcset);
+ if (!ifcset_ptr)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Ifcset pointer not found for ifcset %d", ifcset));
+ return;
+ }
+ const TUsbcInterface* const ifc_ptr = ifcset_ptr->CurrentInterface();
+ if (!ifc_ptr)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Current ifc pointer not found for ifcset %d", ifcset));
+ return;
+ }
+ TUint state = 0;
+ const TInt eps = ifc_ptr->iEndpoints.Count();
+ for (TInt i = 0; i < eps; i++)
+ {
+ const TUsbcLogicalEndpoint* const ep_ptr = ifc_ptr->iEndpoints[i];
+ __KTRACE_OPT(KUSB, Kern::Printf(" checking logical ep #%d for stall state...",
+ ep_ptr->iLEndpointNum));
+ if (ep_ptr->iPEndpoint->iHalt)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" -- stalled"));
+ // set the bit n to 1, where n is the logical endpoint number minus one
+ state |= (1 << (ep_ptr->iLEndpointNum - 1));
+ }
+ else
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" -- not stalled"));
+ }
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf(" passing ep state 0x%x on to LDD @ 0x%x", state, client_id));
+ p->SetState(state);
+ p->DoCallback();
+ }
+
+
+void DUsbClientController::OtgFeaturesNotify()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::OtgFeaturesNotify()"));
+
+ // This function may be called from the PSL (via PIL's chapter9.cpp) from
+ // within an ISR -- so we have to take care what we do here (and also in
+ // all functions that get called from here).
+
+ TSglQueIter<TUsbcOtgFeatureCallback> iter(iOtgCallbacks);
+ TUsbcOtgFeatureCallback* p;
+ while ((p = iter++) != NULL)
+ {
+ p->SetFeatures(iOtgFuncMap & 0x1C);
+ p->DoCallback();
+ }
+ }
+
+
+void DUsbClientController::RunClientCallbacks()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::RunClientCallbacks()"));
+ TSglQueIter<TUsbcClientCallback> iter(iClientCallbacks);
+ TUsbcClientCallback* p;
+ while ((p = iter++) != NULL)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("Callback 0x%x", p));
+ p->DoCallback();
+ }
+ }
+
+
+void DUsbClientController::ProcessDataTransferDone(TUsbcRequestCallback& aRcb)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::ProcessDataTransferDone()"));
+ // This piece can only be called in thread context from ProcessEp0DataReceived() /
+ // ProcessEp0SetupReceived() via the call to ProcessEp0ReceiveDone() in
+ // SetupReadBuffer(), which is guarded by an interrupt lock.
+ TInt ep = aRcb.iRealEpNum;
+ if (ep == 0)
+ {
+ if (aRcb.iTransferDir == UsbShai::EControllerRead)
+ {
+ // Ep0 OUT is special
+ iEp0ReadRequestCallbacks.Remove(aRcb);
+ }
+ else // UsbShai::EControllerWrite
+ {
+ // Ep0 IN needs to be adjusted: it's '1' within the PIL.
+ ep = KEp0_Tx;
+ }
+ }
+ if (ep > 0) // not 'else'!
+ {
+ __ASSERT_DEBUG((iRequestCallbacks[ep] == &aRcb), Kern::Fault(KUsbPILPanicCat, __LINE__));
+ __KTRACE_OPT(KUSB, Kern::Printf(" > removing RequestCallback[%d] @ 0x%x", ep, &aRcb));
+ iRequestCallbacks[ep] = NULL;
+ }
+ aRcb.DoCallback();
+ }
+
+
+void DUsbClientController::NextDeviceState(UsbShai::TUsbPeripheralState aNextState)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::NextDeviceState()"));
+#ifdef _DEBUG
+ const char* const states[] = {"Undefined", "Attached", "Powered", "Default",
+ "Address", "Configured", "Suspended"};
+ if ((aNextState >= UsbShai::EUsbPeripheralStateUndefined) &&
+ (aNextState <= UsbShai::EUsbPeripheralStateSuspended))
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" next device state: %s", states[aNextState]));
+ }
+ else
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Unknown next device state: %d", aNextState));
+ }
+ // Print a warning when an invalid state transition is detected
+ // 'Undefined' is not a state that is mentioned in the USB spec, but
+ // that's what we're in once the cable gets pulled (for instance).
+ switch (iDeviceState)
+ {
+ case UsbShai::EUsbPeripheralStateUndefined:
+ // valid: Undefined -> Attached
+ if (aNextState != UsbShai::EUsbPeripheralStateAttached)
+ break;
+ goto OK;
+ case UsbShai::EUsbPeripheralStateAttached:
+ // valid: Attached -> {Undefined, Powered}
+ if ((aNextState != UsbShai::EUsbPeripheralStateUndefined) &&
+ (aNextState != UsbShai::EUsbPeripheralStatePowered))
+ break;
+ goto OK;
+ case UsbShai::EUsbPeripheralStatePowered:
+ // valid: Powered -> {Undefined, Attached, Default, Suspended}
+ if ((aNextState != UsbShai::EUsbPeripheralStateUndefined) &&
+ (aNextState != UsbShai::EUsbPeripheralStateAttached) &&
+ (aNextState != UsbShai::EUsbPeripheralStateDefault) &&
+ (aNextState != UsbShai::EUsbPeripheralStateSuspended))
+ break;
+ goto OK;
+ case UsbShai::EUsbPeripheralStateDefault:
+ // valid: Default -> {Undefined, Powered, Default, Address, Suspended}
+ if ((aNextState != UsbShai::EUsbPeripheralStateUndefined) &&
+ (aNextState != UsbShai::EUsbPeripheralStatePowered) &&
+ (aNextState != UsbShai::EUsbPeripheralStateDefault) &&
+ (aNextState != UsbShai::EUsbPeripheralStateAddress) &&
+ (aNextState != UsbShai::EUsbPeripheralStateSuspended))
+ break;
+ goto OK;
+ case UsbShai::EUsbPeripheralStateAddress:
+ // valid: Address -> {Undefined, Powered, Default, Configured, Suspended}
+ if ((aNextState != UsbShai::EUsbPeripheralStateUndefined) &&
+ (aNextState != UsbShai::EUsbPeripheralStatePowered) &&
+ (aNextState != UsbShai::EUsbPeripheralStateDefault) &&
+ (aNextState != UsbShai::EUsbPeripheralStateConfigured) &&
+ (aNextState != UsbShai::EUsbPeripheralStateSuspended))
+ break;
+ goto OK;
+ case UsbShai::EUsbPeripheralStateConfigured:
+ // valid: Configured -> {Undefined, Powered, Default, Address, Suspended}
+ if ((aNextState != UsbShai::EUsbPeripheralStateUndefined) &&
+ (aNextState != UsbShai::EUsbPeripheralStatePowered) &&
+ (aNextState != UsbShai::EUsbPeripheralStateDefault) &&
+ (aNextState != UsbShai::EUsbPeripheralStateAddress) &&
+ (aNextState != UsbShai::EUsbPeripheralStateSuspended))
+ break;
+ goto OK;
+ case UsbShai::EUsbPeripheralStateSuspended:
+ // valid: Suspended -> {Undefined, Powered, Default, Address, Configured}
+ if ((aNextState != UsbShai::EUsbPeripheralStateUndefined) &&
+ (aNextState != UsbShai::EUsbPeripheralStatePowered) &&
+ (aNextState != UsbShai::EUsbPeripheralStateDefault) &&
+ (aNextState != UsbShai::EUsbPeripheralStateAddress) &&
+ (aNextState != UsbShai::EUsbPeripheralStateConfigured))
+ break;
+ goto OK;
+ default:
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: Unknown current device state: %d", iDeviceState));
+ goto OK;
+ }
+ // KUSB only (instead of KPANIC) so as not to worry people too much where
+ // a particular h/w regularly enforces invalid (but harmless) transitions
+ __KTRACE_OPT(KUSB, Kern::Printf(" Warning: Invalid next state from %s", states[iDeviceState]));
+OK:
+#endif // _DEBUG
+
+ iDeviceState = aNextState;
+ StatusNotify(iDeviceState);
+ }
+
+
+TInt DUsbClientController::ProcessSuspendEvent()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::ProcessSuspendEvent()"));
+ // A suspend interrupt has been received and needs attention.
+ iDeviceStateB4Suspend = iDeviceState;
+
+ // We have to move to the Suspend state immediately (in case it's a genuine Suspend)
+ // because 7.1.7.6 says: "The device must actually be suspended, [...] after no more
+ // than 10ms of bus inactivity [...]." Assuming we got the interrupt 3ms after the
+ // Suspend condition arose, we have now 7ms left.
+ NextDeviceState(UsbShai::EUsbPeripheralStateSuspended);
+ iController.Suspend();
+
+ return KErrNone;
+ }
+
+TInt DUsbClientController::ProcessResumeEvent()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::ProcessResumeEvent()"));
+ if (iDeviceState == UsbShai::EUsbPeripheralStateSuspended)
+ {
+ NextDeviceState(iDeviceStateB4Suspend);
+ }
+ iController.Resume();
+ return KErrNone;
+ }
+
+
+TInt DUsbClientController::ProcessResetEvent(TBool aPslUpcall)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::ProcessResetEvent()"));
+
+ if (aPslUpcall)
+ {
+ // Call back into PSL if we're coming from there.
+ // Also, do it always, even when PIL processing will be deferred.
+ iController.Reset();
+ }
+
+ // In an OTG-environment, some OTG controllers have implemented
+ // the OTG state machine in HW and connect to the bus
+ // automatically already before the SW has indicated
+ // readiness. Peripheral PSL operating on top of such controller
+ // may report a reset event already before the upper layers are
+ // ready. In this case we defer the reset processing to after the
+ // upper layers have indicated their readiness.
+ if (iUsbResetDeferred)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" User-side (still) not ready -> returning"));
+ return KErrNone;
+ }
+ else if (!iClientSupportReady)
+ {
+ // Wait with the PIL Reset processing until user-side is ready
+ __KTRACE_OPT(KUSB, Kern::Printf(" User-side not ready -> deferring"));
+ iUsbResetDeferred = ETrue;
+ return KErrNone;
+ }
+
+ if (iDeviceState == UsbShai::EUsbPeripheralStateAttached)
+ {
+ NextDeviceState(UsbShai::EUsbPeripheralStatePowered);
+ }
+ // Notify the world. (This will just queue a DFC, so users won't actually be
+ // notified before we return. But we change the device state already here so
+ // ChangeConfiguration will see the correct one.)
+ NextDeviceState(UsbShai::EUsbPeripheralStateDefault);
+ // Tear down the current configuration (never called from thread)
+ ChangeConfiguration(0);
+ // Reset essential vars
+ ResetEp0DataOutVars();
+ //iEp0_RxExtraData = EFalse;
+ iEp0WritePending = EFalse;
+ iEp0ClientDataTransmitting = EFalse;
+
+ iLastError = KErrNone;
+ iSetupPacketPending = EFalse;
+ //iEp0_RxExtraError = 0;
+ iConTransferMgr->Reset();
+
+ // Reset OTG features, leave attributes as is
+ iOtgFuncMap &= KUsbOtgAttr_SrpSupp | KUsbOtgAttr_HnpSupp;
+ if (iOtgSupport)
+ {
+ OtgFeaturesNotify();
+ }
+
+ // Check whether there's a speed change
+ const TBool was_hs = iHighSpeed;
+ iHighSpeed = CurrentlyUsingHighSpeed();
+ if (!was_hs && iHighSpeed)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Moving to High-speed"));
+ EnterHighSpeed();
+ }
+ else if (was_hs && !iHighSpeed)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Moving to Full-speed"));
+ EnterFullSpeed();
+ }
+
+ // Setup initial Ep0 read (SetupEndpointZeroRead never called from thread)
+ if (iConTransferMgr->SetupEndpointZeroRead() != KErrNone)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: while setting up Ep0 read"));
+ return KErrGeneral;
+ }
+
+ return KErrNone;
+ }
+
+
+TInt DUsbClientController::ProcessVbusRisenEvent()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::ProcessVbusRisenEvent()"));
+ if (iIsOtgPort)
+ {
+ // In an OTG environment, this notification is not expected
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: EUsbEventVbusRisen shouldn't be sent by an OTG Client PSL"));
+ return KErrArgument;
+ }
+ else
+ {
+ // In a non-OTG environment, seeing VBUS rising causes the
+ // peripheral stack to be enabled
+ EnablePeripheralStack();
+ return KErrNone;
+ }
+ }
+
+
+TInt DUsbClientController::ProcessVbusFallenEvent()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::ProcessVbusFallenEvent()"));
+ if (iIsOtgPort)
+ {
+ // In an OTG environment, this notification is not expected
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: EUsbEventVbusFallen shouldn't be sent by an OTG Client PSL"));
+ return KErrArgument;
+ }
+ else
+ {
+ // In a non-OTG environment, seeing VBUS falling causes the
+ // peripheral stack to be disabled
+ DisablePeripheralStack();
+ return KErrNone;
+ }
+ }
+
+
+void DUsbClientController::EnterFullSpeed()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::EnterFullSpeed()"));
+ iDescriptors.UpdateDescriptorsFs();
+ }
+
+
+void DUsbClientController::EnterHighSpeed()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::EnterHighSpeed()"));
+ iDescriptors.UpdateDescriptorsHs();
+ }
+
+
+//
+// DFC (static), we are runing in a DFC context.
+//
+void DUsbClientController::ReconnectTimerCallback(TAny *aPtr)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("DUsbClientController::ReconnectTimerCallback()"));
+ if (!aPtr)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: !aPtr"));
+ return;
+ }
+
+ DUsbClientController* const ptr = static_cast<DUsbClientController*>(aPtr);
+
+ ptr->UsbConnect();
+
+ }
+
+//
+// static Dfc function
+//
+void DUsbClientController::PowerUpDfc(TAny* aPtr)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::PowerUpDfc"));
+ if (!aPtr)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: !aPtr"));
+ return;
+ }
+
+ DUsbClientController* const ptr = static_cast<DUsbClientController*>(aPtr);
+
+ __PM_ASSERT(ptr->iStandby);
+
+ ptr->iStandby = EFalse;
+
+ // We have nothing to do when powerup
+ ptr->iPowerHandler->PowerUpDone();
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::PowerUpDfc"));
+ return ;
+ }
+
+//
+// static Dfc function
+//
+void DUsbClientController::PowerDownDfc(TAny* aPtr)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::PowerDownDfc"));
+ if (!aPtr)
+ {
+ __KTRACE_OPT(KPANIC, Kern::Printf(" Error: !aPtr"));
+ return;
+ }
+
+ DUsbClientController* const ptr = static_cast<DUsbClientController*>(aPtr);
+ __PM_ASSERT(!ptr->iStandby);
+
+ ptr->iStandby = ETrue;
+
+ // Disable stack(stop controller inside)
+ ptr->DisablePeripheralStack();
+
+ ptr->iPowerHandler->PowerDownDone();
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::PowerDownDfc"));
+ return ;
+ }
+
+//
+// Static Dfc function
+//
+void DUsbClientController::DeviceEventNotifyDfc(TAny* aPtr)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::DeviceEventNotifyDfc"));
+ DUsbClientController* const ptr = static_cast<DUsbClientController*>(aPtr);
+
+ UsbShai::TUsbPeripheralEvent event = ptr->iDevEventQueue.FifoGet();
+
+ if( event == -1)
+ {
+ // No event queued
+ __KTRACE_OPT(KUSB, Kern::Printf(" Warning, No event found, exit !!!"));
+ return;
+ }
+
+ ptr->ProcessDeviceEventNotification(event);
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::DeviceEventNotifyDfc"));
+ }
+
+//
+// Static Dfc function
+//
+void DUsbClientController::ThreadContextFinderDfc(TAny* aPtr)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::ThreadContextFinderDfc"));
+
+ DUsbClientController* const ptr = static_cast<DUsbClientController*>(aPtr);
+
+ ptr->iCommonDfcQThread = NKern::CurrentThread();
+ __KTRACE_OPT(KUSB, Kern::Printf(" iCommonDfcQThread = %d",ptr->iCommonDfcQThread));
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::ThreadContextFinderDfc"));
+ }
+//
+//
+//
+void DUsbClientController::ProcessDeviceEventNotification(UsbShai::TUsbPeripheralEvent aEvent)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> DUsbClientController::ProcessDeviceEventNotification %d",aEvent));
+ // If an OTG Observer has registered, forward the event
+ // notification to it as well
+ if (iOtgObserver != NULL)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf(" Forwarding to OTG Observer"));
+ iOtgObserver->NotifyPeripheralEvent(aEvent);
+ }
+
+ // This function may be called by the PSL from within an ISR -- so we have
+ // to take care what we do here (and also in all functions that get called
+ // from here).
+
+ switch (aEvent)
+ {
+ case UsbShai::EUsbEventSuspend:
+ ProcessSuspendEvent();
+ break;
+ case UsbShai::EUsbEventResume:
+ ProcessResumeEvent();
+ break;
+ case UsbShai::EUsbEventReset:
+ ProcessResetEvent();
+ break;
+ case UsbShai::EUsbEventVbusRisen:
+ ProcessVbusRisenEvent();
+ break;
+ case UsbShai::EUsbEventVbusFallen:
+ ProcessVbusFallenEvent();
+ break;
+
+ default:
+ break;
+ }
+
+ __KTRACE_OPT(KUSB, Kern::Printf("< DUsbClientController::ProcessDeviceEventNotification"));
+ }
+
+// Functions from UsbShai::MChargerDetectorObserverIf
+void DUsbClientController::NotifyPortType(UsbShai::TPortType aPortType)
+ {
+ // FIXME: Not yet implemented!
+ }
+
+void DUsbClientController::Buffer2Setup(const TAny* aBuf, TUsbcSetup& aSetup) const
+ {
+ // TUint8 index
+ aSetup.iRequestType = static_cast<const TUint8*>(aBuf)[0];
+ aSetup.iRequest = static_cast<const TUint8*>(aBuf)[1];
+ // TUint16 index from here!
+ aSetup.iValue = SWAP_BYTES_16((static_cast<const TUint16*>(aBuf))[1]);
+ aSetup.iIndex = SWAP_BYTES_16((static_cast<const TUint16*>(aBuf))[2]);
+ aSetup.iLength = SWAP_BYTES_16((static_cast<const TUint16*>(aBuf))[3]);
+ }
+
+TUsbPeriDeviceEventQueue::TUsbPeriDeviceEventQueue()
+ {
+ iDeviceQueueHead = 0;
+ iDeviceQueueTail = 0;
+ }
+
+// FifoAdd will be called from Isr or IDfc context
+// be careful when processing
+void TUsbPeriDeviceEventQueue::FifoAdd(UsbShai::TUsbPeripheralEvent aDeviceEvent)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> TUsbPeriDeviceEventQueue::FifoAdd %d , %d",iDeviceQueueHead,iDeviceQueueTail));
+ iDeviceEventQueue[iDeviceQueueTail] = aDeviceEvent;
+
+ iDeviceQueueTail ++;
+ iDeviceQueueTail %= KUsbDeviceEventQueueDepth;
+ if(iDeviceQueueTail == iDeviceQueueHead)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("TUsbPeriDeviceEventQueue::FifoAdd overflow, oldest event missed"));
+ iDeviceQueueHead ++;
+ iDeviceQueueHead %= KUsbDeviceEventQueueDepth;
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf("< TUsbPeriDeviceEventQueue::FifoAdd %d , %d",iDeviceQueueHead,iDeviceQueueTail));
+ }
+
+// FifoAdd will be called from thread context
+UsbShai::TUsbPeripheralEvent TUsbPeriDeviceEventQueue::FifoGet()
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> TUsbPeriDeviceEventQueue::FifoGet %d , %d",iDeviceQueueHead,iDeviceQueueTail));
+ UsbShai::TUsbPeripheralEvent ret = (UsbShai::TUsbPeripheralEvent)-1;
+
+ if(iDeviceQueueHead != iDeviceQueueTail)
+ {
+ ret = iDeviceEventQueue[iDeviceQueueHead];
+ iDeviceQueueHead++;
+ iDeviceQueueHead %= KUsbDeviceEventQueueDepth;
+ }
+ __KTRACE_OPT(KUSB, Kern::Printf("< TUsbPeriDeviceEventQueue::FifoGet %d , %d",iDeviceQueueHead,iDeviceQueueTail));
+ return ret;
+ }
+
+/** Sets some data members of this request for a read request.
+
+ @param aBufferStart The start of the data buffer to be filled.
+ @param aBufferAddr The physical address of the buffer (used for DMA).
+ @param aPacketIndex A pointer to the packet index values array.
+ @param aPacketSize A pointer to the packet size values array.
+ @param aLength The number of bytes to be received.
+*/
+EXPORT_C void TUsbcRequestCallback::SetRxBufferInfo(TUint8* aBufferStart, TUintPtr aBufferAddr,
+ TUint32* aPacketIndex,
+ TUint32* aPacketSize,
+ TInt aLength)
+ {
+ iTransferDir = UsbShai::EControllerRead;
+ iBufferStart = aBufferStart;
+ iBufferAddr = aBufferAddr;
+ iPacketIndex = aPacketIndex;
+ iPacketSize = aPacketSize;
+ iLength = aLength;
+ }
+
+
+/** Sets some data members of this request for a write request.
+
+ @param aBufferStart The start of the buffer that contains the data to be sent.
+ @param aBufferAddr The physical address of the buffer (used for DMA).
+ @param aLength The number of bytes to be transmitted.
+*/
+EXPORT_C void TUsbcRequestCallback::SetTxBufferInfo(TUint8* aBufferStart, TUintPtr aBufferAddr, TInt aLength)
+ {
+ iTransferDir = UsbShai::EControllerWrite;
+ iBufferStart = aBufferStart;
+ iBufferAddr = aBufferAddr;
+ iLength = aLength;
+ }
+
+EXPORT_C UsbShai::TUsbPeripheralRequest::TUsbPeripheralRequest(TInt aRealEpNum):
+ iRealEpNum(aRealEpNum),
+ iBufferStart(NULL),
+ iBufferAddr(0),
+ iLength(0),
+ iTxBytes(0),
+ iRxPackets(0),
+ iPacketIndex(NULL), // actually TUint16 (*)[]
+ iPacketSize(NULL), // actually TUint16 (*)[]
+ iTransferDir(EControllerNone),
+ iZlpReqd(EFalse),
+ iError(KErrNone)
+ {
+ }
+
+// Peripheral PSL use this interface to register itself to PIL layer, in our case,
+// DUsbClientController instance
+//
+// param aPeripheralControllerIf point to an implementation of
+// UsbShai::MPeripheralControllerIf which represent a peripheral controller hardware.
+EXPORT_C void UsbShai::UsbPeripheralPil::RegisterPeripheralController( UsbShai::MPeripheralControllerIf& aPeripheralControllerIf,
+ const UsbShai::TPeripheralControllerProperties& aProperties)
+ {
+ __KTRACE_OPT(KUSB, Kern::Printf("> UsbPeripheralPil::RegisterPeripheralController enter."));
+
+ DUsbClientController* usbcc = DUsbClientController::Create(aPeripheralControllerIf,
+ aProperties,
+ /*aIsOtgPort=*/EFalse);
+ __ASSERT_DEBUG( (usbcc != NULL),
+ Kern::Fault( "DUsbClientController extension entry point: USB PSL Out of memory", __LINE__ ) );
+ }
+
+// The way for charger detector(PSL) to make it known to us.
+EXPORT_C void UsbShai::UsbChargerDetectionPil::RegisterChargerDetector(UsbShai::MChargerDetectorIf& aChargerDetector,
+ UsbShai::TChargerDetectorProperties& aProperties)
+ {
+ // Only on charger detector is allowed per system.
+ if( gChargerDetector != NULL)
+ {
+ return ;
+ }
+
+ gChargerDetector = &aChargerDetector;
+
+ if(gChargerObsever != NULL)
+ {
+ // Register to charger detector to listen to any charger type change
+ // events.
+ gChargerDetector->SetChargerDetectorObserver(*gChargerObsever);
+ }
+ }
+
+// -EOF-