/*
* Copyright (c) 2006-2010 Nokia Corporation and/or its subsidiary(-ies).
* All rights reserved.
* This component and the accompanying materials are made available
* under the terms of "Eclipse Public License v1.0"
* which accompanies this distribution, and is available
* at the URL "http://www.eclipse.org/legal/epl-v10.html".
*
* Initial Contributors:
* Nokia Corporation - initial contribution.
*
* Contributors:
*
* Description: Internal CenRep keys
*
*/
/*
* %version: 16 %
*/
#ifndef WLANDEVICESETTINGSINTERNALCRKEYS_H
#define WLANDEVICESETTINGSINTERNALCRKEYS_H
/**
* Repository Id
*/
const TUid KCRUidWlanDeviceSettingsRegistryId = {0x101f8e44};
/**
* The beacon interval in milliseconds to be used when creating an IBSS network.
*/
const TUint32 KWlanBeacon = 0x00000002;
/**
* The data rate used for sending probe requests. The value is determined by
* multiplying the data rate by two; 1MB/s = 2, 2MB/s = 4 and so forth.
*/
const TUint32 KWlanScanRate = 0x00000004;
/**
* The RCPI threshold after which roaming to a better AP is attempted.
*/
const TUint32 KWlanRcpiTrigger = 0x00000005;
/**
* The minimum channel time for active scan in milliseconds.
*/
const TUint32 KWlanMinActiveChannelTime = 0x00000006;
/**
* The maximum channel time for active scan in milliseconds.
*/
const TUint32 KWlanMaxActiveChannelTime = 0x00000007;
/**
* The maximum amount of time allowed to transmit a packet before
* it is discarded. The value is in milliseconds.
*/
const TUint32 KWlanMaxTxMSDULifeTime = 0x00000008;
/**
* Defines how many seconds the cached broadcast scan results are valid.
*/
const TUint32 KWlanScanExpirationTimer = 0x00000009;
/**
* The activity timeout value after which the WLAN drivers are unloaded.
* Note that this setting applies only when the terminal is not connected
* to a network. The value is in seconds.
*/
const TUint32 KWlanUnloadDriverTimer = 0x0000000A;
/**
* Defines how often roaming to better AP is attempted when the threshold
* set in KWlanRcpiTrigger has been crossed. The value is in microseconds.
*/
const TUint32 KWlanRoamTimer = 0x0000000B;
/**
* Defines the how much better an AP has to be than the current AP
* before roaming is attempted.
*/
const TUint32 KWlanRcpiDifference = 0x0000000C;
/**
* The amount of time to wait after a BSS lost indication before
* attempting to roam. The value is in microseconds.
*/
const TUint32 KWlanConnRegainTimer = 0x0000000D;
/**
* The number of attempts to find suitable network during initial connect.
*/
const TUint32 KWlanMaxTriesToFindNw = 0x0000000E;
/**
* KWlanDelayBetweenFindNw
* Defines the delay between attempts to find network.
* (microseconds)
*/
const TUint32 KWlanDelayBetweenFindNw = 0x0000000F;
/**
* Maximum transfer unit (MTU) size
*/
const TUint32 KWlanMTU = 0x00000010;
/**
* KWlanMinPassiveChannelTime
* Minimum channel time for passive scan.
*/
const TUint32 KWlanMinPassiveChannelTime = 0x00000011;
/**
* KWlanMaxPassiveChannelTime
* Maximum channel time for passive scan.
*/
const TUint32 KWlanMaxPassiveChannelTime = 0x00000012;
/**
* KWlanMaxApFailureCount
* Maximum amount of association failures.
*/
const TUint32 KWlanMaxApFailureCount = 0x00000013;
/**
* KWlanLongBeaconFindCount
* Long beacon interval AP detection.
*/
const TUint32 KWlanLongBeaconFindCount = 0x00000014;
/**
* KWlanQosNullFrameInterval
* QoS NULL data frame send interval.
*/
const TUint32 KWlanQosNullFrameInterval = 0x00000015;
/**
* KWlanQosNullFrameTimeout
* QoS NULL data frame send timeout.
*/
const TUint32 KWlanQosNullFrameTimeout = 0x00000016;
/**
* NULL data frame sending interval when no transmission in microseconds.
*/
const TUint32 KWlanKeepAliveInterval = 0x00000017;
/**
* RCPI threshold for direct scan stop in BSS lost.
*/
const TUint32 KWlanScanStopRcpiThreshold = 0x00000018;
/**
* Minimum RCPI for available IAP.
*/
const TUint32 KWlanMinRcpiForIapAvailability = 0x00000019;
/**
* Entry timeout for QoS NULL frame sending in microseconds.
*/
const TUint32 KWlanQoSNullFrameEntryTimeout = 0x0000001A;
/**
* Deauthentications per AP before blacklisting.
*/
const TUint32 KWlanMaxApDeauthenticationCount = 0x0000001B;
/**
* Deauthentication timeout for calculating AP's deauthentication count
* (in microseconds).
*/
const TUint32 KWlanApDeauthenticationTimeout = 0x0000001C;
/**
* Default value in seconds for BackGround Scan Interval
*/
const TUint32 KWlanDefaultBGScanInterval = 0x0000001D;
/**
* Maximum amount of microseconds to sleep when waking up on DTIMs.
*/
const TUint32 KWlanMaxDtimSkipInterval = 0x0000001F;
/**
* Time interval in microseconds after which transition from Active mode
* to Light PS mode is considered.
*/
const TUint32 KWlanPsActiveToLightTimeout = 0x00000020;
/**
* Frame count threshold used when considering transition from Active
* to Light PS mode.
*/
const TUint32 KWlanPsActiveToLightThreshold = 0x00000021;
/**
* Time interval in microseconds after which the frame counter used when
* considering transition from Light PS to Active mode is reset.
*/
const TUint32 KWlanPsLightToActiveTimeout = 0x00000022;
/**
* Frame count threshold used when considering transition from Light PS
* to Active mode.
*/
const TUint32 KWlanPsLightToActiveThreshold = 0x00000023;
/**
* Time interval in microseconds after which transition from Light PS mode
* to Deep PS mode is considered.
*/
const TUint32 KWlanPsLightToDeepTimeout = 0x00000024;
/**
* Frame count threshold used when considering transition from Light PS
* to Deep PS mode.
*/
const TUint32 KWlanPsLightToDeepThreshold = 0x00000025;
/**
* Received frame payload length (in bytes) threshold in U-APSD network for
* Best Effort Access Category.
*/
const TUint32 KWlanPsUapsdRxFrameLengthThreshold = 0x00000026;
/**
* The minimum delay between RCPI roam checks (in microseconds).
*/
const TUint32 KWlanRcpiRoamMinInterval = 0x00000027;
/**
* The maximum delay between RCPI roam checks (in microseconds).
*/
const TUint32 KWlanRcpiRoamMaxInterval = 0x00000028;
/**
* Defines how many times an RCPI roam check interval value is used
* until the next interval value is calculated.
*/
const TUint32 KWlanRcpiRoamAttemptsPerInterval = 0x00000029;
/**
* The factor the current interval value is multiplied by to
* get the next interval value.
*/
const TUint32 KWlanRcpiRoamNextIntervalFactor = 0x0000002A;
/**
* The value that is added to the interval value that has been
* multiplied by KWlanRcpiRoamNextIntervalFactor.
*/
const TUint32 KWlanRcpiRoamNextIntervalAddition = 0x0000002B;
/**
* Defines how long beacons/probe responses are stored in
* the internal scan list (in microseconds).
*/
const TUint32 KWlanScanListExpirationTime = 0x0000002C;
/**
* Defines how many Voice AC packets must be sent during a certain period
* before QoS NULL data frame sending is started.
*/
const TUint32 KWlanQoSNullFrameEntryTxCount = 0x0000002D;
/**
* The signal predictor algorithm target RCPI value for roam indication.
*/
const TUint32 KWlanSpRcpiTarget = 0x0000002E;
/**
* The signal predictor algorithm target time for roam indication (in microseconds).
*/
const TUint32 KWlanSpTimeTarget = 0x0000002F;
/**
* The minimum time interval for consecutive roam indications
* from the signal predictor algorithm (in microseconds).
*/
const TUint32 KWlanSpMinIndicationInterval = 0x00000030;
/**
* The minimum delay between BSS lost roam attempts (in microseconds).
*/
const TUint32 KWlanBssLostRoamMinInterval = 0x00000031;
/**
* The maximum delay between BSS lost roam attempts (in microseconds).
*/
const TUint32 KWlanBssLostRoamMaxInterval = 0x00000032;
/**
* Defines how many times a BSS lost roam interval value is used
* until the next interval value is calculated.
*/
const TUint32 KWlanBssLostRoamAttemptsPerInterval = 0x00000033;
/**
* The factor the current interval value is multiplied by to
* get the next interval value.
*/
const TUint32 KWlanBssLostRoamNextIntervalFactor = 0x00000034;
/**
* The value that is added to the interval value that has been
* multiplied by KWlanBssLostRoamNextIntervalFactor.
*/
const TUint32 KWlanBssLostRoamNextIntervalAddition = 0x00000035;
/**
* Defines how many attempts are made to find a suitable AP before
* giving up during BSS lost.
*/
const TUint32 KWlanBssLostRoamMaxTriesToFindNw = 0x00000036;
/**
* Defines how many microseconds to wait for traffic stream request response.
*/
const TUint32 KWlanTrafficStreamCreationTimeout = 0x00000037;
/**
* The number of lost consecutive beacons after which beacon lost event
* is indicated.
*/
const TUint32 KWlanBeaconLostThreshold = 0x00000038;
/**
* The number of lost consecutive beacons after which beacon lost event
* is indicated during an active Bluetooth connection.
*/
const TUint32 KWlanBtBeaconLostThreshold = 0x00000039;
/**
* The number of lost consecutive packets after which TX failure event
* is indicated.
*/
const TUint32 KWlanTxFailThreshold = 0x0000003A;
/**
* The number of lost consecutive packets after which TX failure event
* is indicated during an active Bluetooth connection.
*/
const TUint32 KWlanBtTxFailThreshold = 0x0000003B;
/**
* The number of seconds after which power save is enabled during
* the initial association.
*/
const TUint32 KWlanPowerSaveDelay = 0x0000003C;
/**
* The amount of seconds region information is valid.
*/
const TUint32 KWlanRegionExpirationTime = 0x0000003D;
/**
* Minimum interval for accepting subsequent RRM Beacon Requests
* (in microseconds).
*/
const TUint32 KWlanRrmMinMeasurementInterval = 0x0000003E;
/**
* Current PSM server mode where possible values are:
* 0 = Normal mode
* 1 = Power save
* 2 = Partial power save
*/
const TUint32 KWlanPsmSrvMode = 0x0000003F;
/**
* Peak start time for WLAN background scan specifying hours and minutes.
* Valid range is 0 to 2359 meaning 00:00 o'clock to 23:59 o'clock.
*/
const TUint32 KWlanBgScanPeakPeriodStart = 0x00000040;
/**
* Peak end time for WLAN background scan specifying hours and minutes.
* Valid range is 0 to 2359 meaning 00:00 o'clock to 23:59 o'clock.
*/
const TUint32 KWlanBgScanPeakPeriodEnd = 0x00000041;
/**
* WLAN background scan interval in seconds for peak period.
*/
const TUint32 KWlanBgScanIntervalPeakPeriod = 0x00000042;
/**
* WLAN background scan interval in seconds for off-peak period.
*/
const TUint32 KWlanBgScanIntervalOffPeakPeriod = 0x00000043;
/**
* Whether admission control traffic stream management is done automatically.
*/
const TUint32 KWlanAutomaticTrafficStreamMgmt = 0x00000044;
/**
* The minimum channel time for active broadcast scan in milliseconds.
*/
const TUint32 KWlanMinActiveBroadcastChannelTime = 0x00000045;
/**
* The maximum channel time for active broadcast scan in milliseconds.
*/
const TUint32 KWlanMaxActiveBroadcastChannelTime = 0x00000046;
/**
* Bitmask of enabled WLAN features.
*/
const TUint32 KWlanEnabledFeatures = 0x00000047;
/**
* Cached WLAN region where possible values are:
* 0 = Region is unknown
* 1 = Region is ETSI
* 2 = Region is FCC.
*/
const TUint32 KWlanRegion = 0x00000050;
/**
* Timestamp for cached WLAN region (minutes from 0AD nominal Gregorian).
*/
const TUint32 KWlanRegionTimestamp = 0x00000051;
/**
* Master switch for WLAN.
*/
const TUint32 KWlanOnOff = 0x00000052;
/**
* Setting for overriding WLAN on/off, forcing it to off.
*/
const TUint32 KWlanForceDisable = 0x00000053;
#endif // WLANDEVICESETTINGSINTERNALCRKEYS_H