diff -r 5b9d4d8641ce -r ae255c9aa552 sysperfana/perfinvestigator/com.nokia.carbide.cpp.pi.doc.user/html/reference/profiler/output_settings.htm --- a/sysperfana/perfinvestigator/com.nokia.carbide.cpp.pi.doc.user/html/reference/profiler/output_settings.htm Wed Jun 23 14:49:59 2010 +0300 +++ b/sysperfana/perfinvestigator/com.nokia.carbide.cpp.pi.doc.user/html/reference/profiler/output_settings.htm Wed Jun 23 15:05:09 2010 +0300 @@ -1,76 +1,95 @@ - - - - - Setting Output Settings - - - - - -

Setting Output Settings

-

Use the Output settings menu in the Profiler to specify the characteristics of the sampled data file. The output settings include:

- - - - - - - - - -
S60
  
UIQ
-

Figure 1. Output Settings options for file system and debug mode (S60 and UIQ)

-
Table 1. Output Settings Options
- - - - - - - - - - - - - - - - - -
Menu Option Description
Output to

Specify either the target device's File system or Debug port to store the sampled data.

-

NOTE Not available in UIQ version.

Save file in If you selected File system in the Output to menu option, then you can save the data file to a memory card or the target device's C:\ drive. -

NOTE Not available in UIQ version.

File prefix

Specify the file prefix for data files. The name of the profiler data file is formed from the prefix and ends with a .dat extension. If you perform multiple traces and use the file output option, include a hash mark (#) in your file prefix. Subsequent traces will then be saved with different file names. The hash mark will be replaced with an incremented number starting from one.

-

Files names must be 19 characters or less.

-

NOTE See Setting Advanced Options for UIQ Mem, Pri sample interval information.

-
-

Setting the Output Settings

-
    -
  1. Launch the Profiler application on the target device
    2. -
  2. Open the Output Settings options screen:
    3. - -
  3. Set the sampled data file informaton
    4. -
  4. Exit the screen
    5. -
-
-
Related references
- -
Related tasks
- - - - + + + + + Setting Output Settings + + + + + +

Setting Output Settings

+ +

Use the Output settings menu in the Profiler to specify the +characteristics of the sampled data file. The output settings include:

+ +

  

+ +

Figure 1. Output Settings options for file system and debug +mode (S60)

+ +
Table 1. Output Settings Options
+ + + + + + + + + + + + + + + + + + + + +
Menu Option Description
Output to

Specify either the target device's File + system or Debug port to store the + sampled data.

+
Save file in If you selected File system in the Output to menu option, then you can save the data + file to a memory card or the target device's C:\ drive.
File prefix

Specify the file prefix for data files. The name of the profiler + data file is formed from the prefix and ends with a .dat extension. If + you perform multiple traces and use the file output option, include a + hash mark (#) in your file prefix. Subsequent traces will then be saved + with different file names. The hash mark will be replaced with an + incremented number starting from one.

+ +

Files names must be 19 characters or + less.

+
+ +
+

Setting the Output Settings

+
    +
  1. Launch the Profiler application on the target device
    2. +
  2. Open the Output Settings options screen:
    3. +
+ +
+ +
Related references
+ + +
Related tasks
+ + + + +