If the connection to the target device fails, check and configure your connections settings:
-
-
In the step 1 of the MemSpy Import Wizard, click Connection
-Settings. This takes you to the connection settings of the TraceViewer Carbide.c++ Extension.
-
In Use connection, select an existing connection to use and click OK, or click New... to create a new connection or Edit to edit an existing one. Follow the next steps if you selected to create a new connection or to edit an existing one.
-
In Connection name, enter a unique name for this connection.
-
In Connection type, select a connection method:
-
-
PlatSim if you are using a PlatSim connection between the PC and the target device.
-
TCP/IP Musti if you are using an XTI connection between the PC and the
-target device.
-
USB if you are using a USB cable connection between the PC and
-the target device.
-
-
Click Next.
-
-
-
Modify the connection settings:
-
-
For PlatSim and TCP/IP Musti: define the IP address to connect to and the OS to be used.
-
-
-
For USB: define the serial port used for USB connection on your PC (such as COM1) amd the OS to be used. To find out the port:
-
-
Connect your phone to the PC using a USB cable and the Nokia PC Suite
-application.
-
(Optional) If you connect for the first time, install the necessary drivers
-to your phone.
-
In Windows, check the correct serial port from the Device Manager
- in the Control Panel. Select Ports (COM & LPT), and
-locate an item similar to Series 60 Nokia S60 Phone USB (COMX), where
-X means the port to connect to.
-
-
-
-
\ No newline at end of file
+
+
+
+
+ Configuring connection settings
+
+
+
+
+
Configuring connection settings
+
+
If the connection to the target device fails, check and configure your
+connections settings:
+
+
In the step 1 of the MemSpy Import Wizard, click Connection
+ Settings. This takes you to the connection settings of the
+ TraceViewer Carbide.c++ Extension. Select the connection you want to
+ use or create a new one. For more information, see TraceViewer Connection
+ Settings.
+
NOTE You can use a USB or a TCP/IP Musti
+ connection, but for profiling several samplers Musti is recommended due the
+ too high amount of data.
-
-