#
# Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).
# All rights reserved.
# This component and the accompanying materials are made available
# under the terms of "Eclipse Public License v1.0"
# which accompanies this distribution, and is available
# at the URL "http://www.eclipse.org/legal/epl-v10.html".
#
# Initial Contributors:
# Nokia Corporation - initial contribution.
#
# Contributors:
#
# Description:
#
#######################################################################################
#
# USE-CASE-1 : Configure the QoS of a Linux-to-Linux PPP channel
#
#######################################################################################
#######################################################################################
#
# Start the services
#
#######################################################################################
runcmd svcid=5 svchost="penmn" methodid=1 PORT=7000
check RESULT=0
runcmd svcid=7 svchost="penmn" methodid=1
check RESULT=0
runcmd svcid=8 svchost="penmn" methodid=1
check RESULT=0
runcmd svcid=10 svchost="penmn" methodid=1
check RESULT=0
runcmd svcid=5 svchost="penpdsn" methodid=1 PORT=7000
check RESULT=0
runcmd svcid=7 svchost="penpdsn" methodid=1
check RESULT=0
runcmd svcid=6 svchost="penuu" methodid=1
check RESULT=0
#######################################################################################
#
# Create two MTs and make them talk to each other
#
#######################################################################################
runcmd svcid=5 svchost="penmn" methodid=3 DATALINKCONFIG=1 FILTERCONFIG=0
assign dev0=RESULT
runcmd svcid=5 svchost="penpdsn" methodid=3 DATALINKCONFIG=1 FILTERCONFIG=0
assign dev1=RESULT
runcmd svcid=9 svchost="localhost" methodid=1 PERIOD=2000
runcmd svcid=5 svchost="penmn" methodid=4 DEVICEID=dev0
assign local_uu_port0=AIR_INPORT
runcmd svcid=5 svchost="penpdsn" methodid=4 DEVICEID=dev1
assign local_uu_port1=AIR_INPORT
runcmd svcid=5 svchost="penmn" methodid=10 DEVICEID=dev0 REMOTE_ADDRESS="192.168.10.11" REMOTE_PORT=local_uu_port1
runcmd svcid=5 svchost="penpdsn" methodid=10 DEVICEID=dev1 REMOTE_ADDRESS="192.168.14.10" REMOTE_PORT=local_uu_port0
#######################################################################################
#
# Create two PPP sessions and wait for them to connect to one another
#
#######################################################################################
runcmd svcid=7 svchost="penmn" methodid=31 MADDR="localhost" MPORT=7000 MTID=dev0 CONFIG="defaultroute noauth debug nodetach noaccomp nobsdcomp nodeflate novjccomp"
assign sid0=RESULT
runcmd svcid=7 svchost="penpdsn" methodid=31 MADDR="localhost" MPORT=7000 MTID=dev1 CONFIG="noauth 192.168.200.20:192.168.200.10 debug nodetach noaccomp nobsdcomp nodeflate novjccomp"
assign sid1=RESULT
runcmd svcid=7 svchost="penmn" methodid=7 SID=sid0
waitfor SESSION_STATUS=2
runcmd svcid=7 svchost="penpdsn" methodid=7 SID=sid1
waitfor SESSION_STATUS=2
#######################################################################################
#
# Set the drop percentage and capture a few ping commands - you can use the
# icmp seq no to see how many were lost
#
#######################################################################################
runcmd svcid=6 svchost="penuu" methodid=4 SRC="192.168.14.10" SRCPORT=local_uu_port0 DST="192.168.10.11" DSTPORT=local_uu_port1 DROPI=20 PROTOCOL="UDP"
runcmd svcid=9 svchost="localhost" methodid=4 MSG="The drop rate of the PPP channel has been set to 20%. You can see the effect of this using the ICMP sequence numbers in the ping output below."
runcmd svcid=8 svchost="penmn" methodid=3 COMMAND="ping -c 10 192.168.12.11" TIMEOUT=-1 GETSTDOUT=1 GETSTDERR=1
runcmd svcid=8 svchost="penmn" methodid=3 COMMAND="ping -c 10 192.168.12.11" TIMEOUT=-1 GETSTDOUT=1 GETSTDERR=1
#######################################################################################
#
# Now give the user a turn to play
#
#######################################################################################
signal
waitforsignal
runcmd svcid=6 svchost="penuu" methodid=4 SRC="192.168.14.10" SRCPORT=local_uu_port0 DST="192.168.10.11" DSTPORT=local_uu_port1 DROPI=0 PROTOCOL="UDP"
#######################################################################################
#
# Set the delay percentage and play
#
#######################################################################################
runcmd svcid=6 svchost="penuu" methodid=3 SRC="192.168.14.10" SRCPORT=local_uu_port0 DST="192.168.10.11" DSTPORT=local_uu_port1 DELAYI=150 PROTOCOL="UDP"
runcmd svcid=9 svchost="localhost" methodid=4 MSG="The delay of the PPP channel has been set to 150ms. You can see the effect of this using the ICMP sequence numbers in the ping output below."
runcmd svcid=10 svchost="penmn" methodid=31 CMD="ping 192.168.12.11"
assign pid0=RESULT
runcmd svcid=10 svchost="penmn" methodid=8 PID=pid0
runcmd svcid=9 svchost="localhost" methodid=1 PERIOD=2000
runcmd svcid=10 svchost="penmn" methodid=8 PID=pid0
runcmd svcid=10 svchost="penmn" methodid=5 PID=pid0
runcmd svcid=10 svchost="penmn" methodid=32 PID=pid0
runcmd svcid=6 svchost="penuu" methodid=3 SRC="192.168.14.10" SRCPORT=local_uu_port0 DST="192.168.10.11" DSTPORT=local_uu_port1 DELAYI=0 PROTOCOL="UDP"
#######################################################################################
#
# STOP the first ppp peer and then wait for the other end to terminate gracefully.
#
#######################################################################################
runcmd svcid=7 svchost="penmn" methodid=6 SID=sid0
check RESULT=0
runcmd svcid=7 svchost="penmn" methodid=8 SID=sid0
runcmd svcid=7 svchost="penmn" methodid=32 SID=sid0
check RESULT=0
runcmd svcid=7 svchost="penpdsn" methodid=7 SID=sid1
waitfor SESSION_PROCESS_STATUS=3
check RESULT=0
check SESSION_STATUS=4
runcmd svcid=7 svchost="penpdsn" methodid=8 SID=sid1
runcmd svcid=7 svchost="penpdsn" methodid=32 SID=sid1
check RESULT=0
#######################################################################################
#
# Remove the mobster devices, they should already have stopped
#
#######################################################################################
runcmd svcid=5 svchost="penmn" methodid=6 DEVICEID=dev0
check RESULT=0
runcmd svcid=5 svchost="penmn" methodid=7 DEVICEID=dev0
check RESULT=0
runcmd svcid=5 svchost="penpdsn" methodid=6 DEVICEID=dev1
check RESULT=0
runcmd svcid=5 svchost="penpdsn" methodid=7 DEVICEID=dev1
check RESULT=0
#######################################################################################
#
# Stop all the services
#
#######################################################################################
runcmd svcid=10 svchost="penmn" methodid=2 FORCE=0
check RESULT=0
runcmd svcid=8 svchost="penmn" methodid=2 FORCE=0
check RESULT=0
runcmd svcid=7 svchost="penmn" methodid=2 FORCE=0
check RESULT=0
runcmd svcid=5 svchost="penmn" methodid=2 FORCE=0
check RESULT=0
runcmd svcid=7 svchost="penpdsn" methodid=2 FORCE=0
check RESULT=0
runcmd svcid=5 svchost="penpdsn" methodid=2 FORCE=0
check RESULT=0
runcmd svcid=6 svchost="penuu" methodid=2
check RESULT=0
#######################################################################################
#
# Done
#
#######################################################################################
rendezvous