<?xml version="1.0" encoding="utf-8"?>

<!-- Copyright (c) 2007-2010 Nokia Corporation and/or its subsidiary(-ies) All rights reserved. -->

<!-- This component and the accompanying materials are made available under the terms of the License 

"Eclipse Public License v1.0" which accompanies this distribution, 

and is available at the URL "http://www.eclipse.org/legal/epl-v10.html". -->

<!-- Initial Contributors:

    Nokia Corporation - initial contribution.

Contributors: 

-->

<!DOCTYPE concept

  PUBLIC "-//OASIS//DTD DITA Concept//EN" "concept.dtd">

<concept id="GUID-3574BE12-9DA9-573D-8545-3B073005A139" xml:lang="en"><title>Configuration:

Timer Constants</title><shortdesc>Describes how to set the values of timer constants that change

the behaviour of the Digitizer Driver. </shortdesc><prolog><metadata><keywords/></metadata></prolog><conbody>

<p>The timing constants are defined near the beginning of the template port

implementation of the platform specific layer in <filepath>...\template\template_variant\specific\xyin.cpp</filepath>. </p>

<p>The values and their meaning are as follows: </p>

<section id="GUID-C8EC7A1D-7597-57BB-ADE4-0EDFFEB323D0"><title>KInterSampleTime</title> <p>This

constant determines the rate at which individual samples within a group are

collected. </p> <p>A group of samples is collected when the pen is down, and,

in the template port, this is handled by <codeph>DTemplateDigitiser::TakeSample()</codeph>. </p> <p>Once

all the samples in a group have been collected, the function calls <xref href="GUID-4C26DF22-B715-30DA-BBF1-8C1CA3A729DB.dita#GUID-4C26DF22-B715-30DA-BBF1-8C1CA3A729DB/GUID-28D95B3F-EC80-3D13-A7F1-EDDC46469732"><apiname>Digitiser::RawSampleValid()</apiname></xref> in

the platform independent layer, whose main purpose is to ensure the validity

of the samples by checking the spread. If the samples appear valid, it averages

the samples to obtain the current position. </p> <p>The setting of the timer

constant depends on the sample resolution of the digitizer: </p> <ul>

<li id="GUID-6D570D10-EDFB-5DFA-803E-E4808367D51B"><p>A high resolution can

lead to more jitter between samples, and therefore more smoothing is required

to obtain nice steady values. This argues for higher sampling rates, and a

smaller value of <codeph>KInterSampleTime</codeph>. </p> </li>

<li id="GUID-44E06F7A-8B7E-5EB5-98E2-131C3BEE75C7"><p>A low resolution means

that there is very little variation between consecutive samples, and therefore

fewer are required. This argues for lower sampling rates, and a larger value

of <codeph>KInterSampleTime</codeph>. </p> </li>

</ul> <p>Another consideration when setting this constant is the speed of

the communications between the MPU and the digitizer. </p> <p>In the Symbian

reference ports, this value varies between 1 and 3. </p> </section>

<section id="GUID-587D0895-7B8D-5FA1-A2DE-2F346780BB78"><title>KPenDownDelayTime</title> <p>This

value is used in the implementation of the <xref href="GUID-AF71FDC2-A8CC-5035-91FE-36212844BC07.dita#GUID-AF71FDC2-A8CC-5035-91FE-36212844BC07/GUID-D74C94E4-83AD-5BC0-B435-754E7D3FECA4">pen

interrupt</xref> interrupt service routine (ISR). It represents a delay, measured

in nano-kernel ticks, between a pen down event and the start of the collection

of digitizer samples. </p> <p>The value is optional. Choose a value of 0 if

no delay is required. Typically, a value of 2 is chosen. </p> </section>

<section id="GUID-84FF861C-F916-5F57-BA6D-ACD5010B0790"><title>KInterGroupTime</title> <p>This

value is used in <codeph>DTemplateDigitiser::WaitForPenUp()</codeph> and <codeph>DTemplateDigitiser::WaitForPenUpDebounce()</codeph>.

After a group of samples has been collected, there is a delay, dictated by

the value of this constant, before the collection for the next group begins. </p> <p>The

inverse of the sum of <xref href="GUID-3574BE12-9DA9-573D-8545-3B073005A139.dita#GUID-3574BE12-9DA9-573D-8545-3B073005A139/GUID-C8EC7A1D-7597-57BB-ADE4-0EDFFEB323D0">KInterSampleTime</xref>,

and <codeph>KInterGroupTime</codeph> will therefore determine the frequency

at which groups of samples are taken. This, in turn, dictates how often pen

movement events are issued, and, if no interrupt is used on pen up, how quickly

this situation is ascertained. The constant is optional. Typically it is set

at 1ms </p> <p>The delay is optional, a value of zero meaning that there is

no delay. Typically, a value of 1 is chosen. </p> </section>

<section id="GUID-9BFC5FDA-FC84-5B54-93AA-BED4035F2A59"><title>KPenUpDebounceTime</title> <p>This

value is used in <codeph>DTemplateDigitiser::TakeSample()</codeph>. If, during

sample collection, the pen goes up, then the digitizer will wait for this

period of time before deciding whether the removal of the pen is momentary,

or whether it is an intentional removal - this is also referred to as debounce. </p> <p>If,

after the delay, the pen is still up, then a pen-up event is issued; otherwise

the state of the digitizer reverts to collecting mode, resetting the sample

buffer </p> <p>Typically, this value is set to around 30. </p> </section>

<section id="GUID-EDA72AF2-460E-52F0-9EC7-634B7AC14D46"><title>KPenUpPollTime</title> <p>This

value is used in <codeph>DTemplateDigitiser::TakeSample()</codeph>. </p> <p>If

the pen is down when the system powers on, then the digitizer is sampled using

this delay until the pen is up. </p> <p>Typically, this value is set at 30. </p> </section>

</conbody></concept>