<?xml version="1.0" encoding="utf-8"?>

<!-- Copyright (c) 2007-2010 Nokia Corporation and/or its subsidiary(-ies) All rights reserved. -->

<!-- This component and the accompanying materials are made available under the terms of the License 

"Eclipse Public License v1.0" which accompanies this distribution, 

and is available at the URL "http://www.eclipse.org/legal/epl-v10.html". -->

<!-- Initial Contributors:

    Nokia Corporation - initial contribution.

Contributors: 

-->

<!DOCTYPE concept

  PUBLIC "-//OASIS//DTD DITA Concept//EN" "concept.dtd">

<concept id="GUID-B1CE51BC-B452-5FC9-9C00-35447AF40671" xml:lang="en"><title> Implement

the controllable power resources</title><shortdesc>This document describes how to write and use power resources. </shortdesc><prolog><metadata><keywords/></metadata></prolog><conbody>

<section id="GUID-7E91DB93-F9D6-4B93-8BAF-E25642F63C57"><title>Purpose</title> <p>Implement your power resource according

to the type of resource you wish to support. </p> <p><b>Introduction</b> </p> <p>Power

resources controlled by the PRM can be turned on, off and varied with software. </p> <p>See

the <xref href="GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE.dita#GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE/GUID-4CC0C003-1952-5CAD-A7C5-163C5DDA52C8">Power

resources</xref> section for detailed information about resources. There are

five main types of resource that can be implemented: </p> <ul>

<li id="GUID-C67FB012-A1D6-5047-AD5A-18CF62971B2B"><p>static resources - derived

from the <xref href="GUID-DB7DDF4C-57EF-34FF-B3CD-13C5CD51A125.dita"><apiname>DStaticPowerResource</apiname></xref> base class, </p> </li>

<li id="GUID-6170B4D1-2AAD-52C7-88E0-D6BBE8CAFF63"><p>static resource that

support dependancy - derived from the <xref href="GUID-88C28976-67DF-3109-8D35-FA30A733C581.dita"><apiname>DStaticpowerResourceD</apiname></xref> base

class, </p> </li>

<li id="GUID-FAE7BFE3-7C2D-5DB7-A8FF-B7E4F37F5BAF"><p>dynamic resources -

derived from the <xref href="GUID-CA01041D-8FD6-3B5B-BB5D-A5159DF7C9AB.dita"><apiname>DDynamicPowerResource</apiname></xref> base class. Create

dynamic resources in the kernel data section or in the heap, </p> </li>

<li id="GUID-9586824D-FB68-5DC1-B743-9ED551FA286D"><p>dynamic resource that

support dependancy - derived from the <xref href="GUID-6B224A9F-D2B9-3289-922D-766EF093FCD6.dita"><apiname>DDynamicPowerResourceD</apiname></xref>. </p> </li>

<li id="GUID-AF8A571A-2AB6-5063-BFA5-3FF8509C95C7"><p>custom sense resources

- when shared the power level of this resource may be increased or decreased

freely by some privileged clients but not by others, which are bound by the

requirement of the privileged clients. </p> </li>

</ul> <p> <b>Note</b>: dynamic resources and resource dependancies are only

supported in the extended version of the PRM. See <xref href="GUID-2ECF13A1-9D56-5740-A09F-8267E6A45DD9.dita#GUID-2ECF13A1-9D56-5740-A09F-8267E6A45DD9/GUID-0F328055-DBCE-5B2B-A1EB-77F73BA1FC82">setup and configuration requirements</xref>. </p> </section>

<section id="GUID-D50E75DC-115E-42FD-9111-7A70E3087F33"><title> Implementing power resources </title> <p>The following tasks

are covered in this tutorial: </p> <ul>

<li id="GUID-2C4FDE84-401B-5520-B050-9FD475A63863">Create your resource by <p> <xref href="GUID-B1CE51BC-B452-5FC9-9C00-35447AF40671.dita#GUID-B1CE51BC-B452-5FC9-9C00-35447AF40671/GUID-3021B2EA-9829-515C-9074-2D2D0D7A5510">Override

the pure virtual functions</xref>, </p> </li>

<li id="GUID-6492CDEF-524E-5A3A-82AB-1D0E0B8E9D28"><p> <xref href="GUID-B1CE51BC-B452-5FC9-9C00-35447AF40671.dita#GUID-B1CE51BC-B452-5FC9-9C00-35447AF40671/GUID-A5D57D89-4499-5C85-80D5-5A7DC5644983">Create resource dependencies</xref>, </p> </li>

<li id="GUID-56A63835-D0B5-5C32-95D0-623A0D21AEF4"><p> <xref href="GUID-B1CE51BC-B452-5FC9-9C00-35447AF40671.dita#GUID-B1CE51BC-B452-5FC9-9C00-35447AF40671/GUID-9526B472-00ED-583A-8BFC-C02363D4DFA2">Create custom resources</xref>. </p> </li>

</ul> <p id="GUID-3021B2EA-9829-515C-9074-2D2D0D7A5510"><b>Override the pure

virtual functions</b> </p> <p>The pure virtual functions of <xref href="GUID-DB7DDF4C-57EF-34FF-B3CD-13C5CD51A125.dita"><apiname>DStaticPowerResource</apiname></xref> or <xref href="GUID-CA01041D-8FD6-3B5B-BB5D-A5159DF7C9AB.dita"><apiname>DDynamicPowerResource</apiname></xref> must

be implemented. </p> <p><b>Constructor</b> </p> <p>Information about the resource

based on the resources category must be set in the <codeph>iFlags</codeph> bit

mask. Static variables that define a resources classification can be found

within <filepath>32\include\drivers\resource.h</filepath>. </p> <p>Each resource

is classified based on: </p> <ul>

<li id="GUID-08E6311D-6403-56CB-B91B-57C93F8CA208"><p>usage, </p> </li>

<li id="GUID-55F93FDB-137F-51D3-A1E3-F048B279425E"><p>operating levels, </p> </li>

<li id="GUID-4DD3D8E1-273A-5BFE-8A65-11B9DDE84E4D"><p>latency, </p> </li>

<li id="GUID-9B00B021-E620-50EA-B2D2-2F18111F5C1E"><p>resource sense. </p> </li>

</ul> <p>Below is the example implementation of derived class constructor </p> <codeblock id="GUID-1DE1E1CA-7212-5E30-85BF-C67578F9CEC8" xml:space="preserve">// multilevel, shared, long latency, read and write, positive resource. 

DMLSHLGLSPResource::DMLSHLGLSPResource() : DStaticPowerResource(KDBSHLGLSPResource, E_ON), 

                     iMinLevel(E_OFF), iMaxLevel(E_ON), iCurrentLevel(E_ON), iPolled(ETrue)

    {

    iFlags = EMultilevel | KShared | KLongLatencySet | KLongLatencyGet;

    . . .   

    }</codeblock> <p><b> GetInfo()</b> </p> <p>The PIL uses <xref href="GUID-66D96ADA-1C26-3293-9F92-FD65E08D6158.dita"><apiname>GetInfo()</apiname></xref> to

get resource information. The default implementation of this function provides

generic information about the resource by updating the passed descriptor that

contains an information structure <xref href="GUID-FA4D9A07-041C-303C-BF96-2E444DD47024.dita"><apiname>TPowerResourceInfoV01</apiname></xref>.

Derived implementations must fill in all the PSL specific fields and call

the base class implementation. Below is an example implementation. </p> <codeblock id="GUID-EB61E8FF-146C-5825-8F16-869FE4DD5B44" xml:space="preserve">TInt DH4SndFclkResource::GetInfo(TDes8* info) const

    {

    __KTRACE_OPT(KRESMANAGER, Kern::Printf(">DH4SndFclkResource::GetInfo\n"));

    /** Call base class implementation to fill generic details */

    DStaticPowerResource::GetInfo((TDes8*) info);

    TPowerResourceInfoV01 *buf1 = (TPowerResourceInfoV01*) info;

    buf1->iMinLevel = iMinLevel;

    buf1->iMaxLevel = iMaxLevel;

    __KTRACE_OPT(KRESMANAGER, Kern::Printf("<DH4SndFclkResource::GetInfo\n"));

    return KErrNone;

    }</codeblock> <p>The member variables of the <codeph>TPowerResourceInfoV01</codeph> structure

are reserved for PSL information. These can be used to return resource specific

information to clients. </p> <p><b>DoRequest()</b> </p> <p> <xref href="GUID-9D910016-5611-30DD-A139-EE46705A4912.dita"><apiname>DoRequest()</apiname></xref> is

used by the PIL to control resources. For example, to change and read the

state of resources. <codeph>DoRequest()</codeph> takes a <xref href="GUID-D204F4A7-8CC8-3EB2-8371-1D1BFD903390.dita"><apiname>TPowerRequest</apiname></xref> object

that contains all the request information. <b>Note</b>: This function needs

to be implemented for all resources. </p> <p>Below is an example <xref href="GUID-9D910016-5611-30DD-A139-EE46705A4912.dita"><apiname>DoRequest()</apiname></xref> function

implementation for a binary, instantaneous resource. </p> <codeblock id="GUID-D5AE04C1-7A9D-5270-840F-6CD662FB46A2" xml:space="preserve">TInt DH4MmcCtrllerPwrResource::DoRequest(TPowerRequest&amp; aRequest)

    {

    TInt retVal = KErrNone;

    TUint16 config;

    /** Enable/disable the MMC controller by programming the MMC controller 'CON' register- 'POW' bit */

    if (aRequest.ReqType()==TPowerRequest::EGet) 

        {

        PRM_PSL_RESOURCE_GET_STATE_START_TRACE

        config = OMAPMMC_GET_REG(KHoMMC_Con_Reg);

        if(config & KHtMMC_PowerUp)

            {

            aRequest.Level() = 1;

            iCurLevel = 1;

            }

        else

            {

            aRequest.Level() = 0;

            iCurLevel = 0;

            }

        PRM_PSL_RESOURCE_GET_STATE_END_TRACE

        }

    else if(aRequest.ReqType()==TPowerRequest::ESetDefaultLevel)

        {

        PRM_PSL_RESOURCE_CHANGE_STATE_START_TRACE

        OMAPMMC_MOD_REG(KHoMMC_Con_Reg, KHtMMC_PowerUp, KClear32);

        iCurLevel = iDefaultLevel;

        aRequest.Level() = iDefaultLevel;

        PRM_PSL_RESOURCE_CHANGE_STATE_END_TRACE

        }

    else 

        {

        PRM_PSL_RESOURCE_CHANGE_STATE_START_TRACE

        if(aRequest.Level() == 1)

            {

            OMAPMMC_MOD_REG(KHoMMC_Con_Reg, KClear32, KHtMMC_PowerUp);

            }

        else

            {

            OMAPMMC_MOD_REG(KHoMMC_Con_Reg, KHtMMC_PowerUp, KClear32);

            }

        iCurLevel = aRequest.Level();

        PRM_PSL_RESOURCE_CHANGE_STATE_END_TRACE

        }

    return retVal;

    }</codeblock><p>The DoRequest function implementation should take care

of blocking the Resource Controller thread as operations on a long latency

resource take a significant amount of time to complete (in hardware). Usually

the request completion is notified either through an ISR (interrupt driven)

or through register setting (polling wait) by hardware. </p><p>Below is an

example <codeph>DoRequest()</codeph> implementation for a long latency resource. </p> <codeblock xml:space="preserve"> TInt DH4MmcPowerResource::DoRequest(TPowerRequest&amp; aRequest)

    {

    TUint8 iMenelausConf;

    TInt retVal = KErrNone;

    /** Access to Menelaus registers is over I2C bus. This is a long latency synchronous operation.

    Create a Menelaus Request structure and send it to Menelaus chip, Wait until a response is received */

    if (aRequest.ReqType()==TPowerRequest::EGet)

        {

        // Frame the request

        ... 

        }

				// Default level is off.

    else if (aRequest.ReqType() == TPowerRequest::ESetDefaultLevel)

        {

        // Frame request to move the resource to default state

        ... 

        }

				// EChange

    else 

       {

       // Frame request to set the requested resource state

       ...     

       }

    // Request the operation on the hardware

    retVal = Menelaus::AccessRegister(iMenelausReq);

    // Wait for the request to complete  

    __KTRACE_OPT(KPBUS1, Kern::Printf("Waiting for menelaus req to signal sem\n"));

    NKern::FSSetOwner(&iSemaphore,NULL);

    iSemaphore.iCount = 0;	

    // This will be signalled in Menelaus access functions callback below

    NKern::FSWait(&(iSemaphore)); 

    // Menelaus chip has responded

    if(iMenelausAccessErr == KErrNone)

        {

        switch(iMenelausState)

            {

            case EMenelausRead:

                // Return 0/1 depending on the value set

                iMenelausConf = (*(iRdBuffer.Ptr())) & KHoMenelausVmmcModeMask;		                    

                if(iMenelausConf == 3)

                    {

                    iCurLevel=aRequest.Level()=1; 

                    }

                else 

                    {

                    iCurLevel=aRequest.Level()=0;

                    }

                PRM_PSL_RESOURCE_GET_STATE_END_TRACE

                break;

            case EMenelausSingleWrite:

                iCurLevel = aRequest.Level();

                PRM_PSL_RESOURCE_CHANGE_STATE_END_TRACE

                break;

            }

        }

        return iMenelausAccessErr;

    }

/** Below is the Menelaus access functions callback where the semaphore is signalled. */

void DH4MmcPowerResource::MenelausAccessDone(TAny* aPtr, TInt aResult)

    {

    DH4MmcPowerResource* ptr = reinterpret_cast<DH4MmcPowerResource*>(aPtr);

    ptr->iMenelausAccessErr = aResult;

    if(aResult != KErrNone)

        {

        __KTRACE_OPT(KRESMANAGER, 

        Kern::Printf("Menelaus::MenelausAccessRegister ERR(%d)\n", aResult));

        }

				// Signal the waiting thread

    NKern::FSSignal(&(ptr->iSemaphore)); 

    return;

    }</codeblock><p id="GUID-A5D57D89-4499-5C85-80D5-5A7DC5644983"><b>Create

resource dependencies</b> </p> <p>A resource has a dependency if the state

of the resource depends on the state of one or more resources. For example,

a clock whose frequency is derived from another clock or voltage is a dependent

resource. The PSL usually handles resource dependencies transparently. However,

if the resources have public users (clients of the PRM), then these resources

should be registered with the PRM as <xref href="GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE.dita#GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE/GUID-473BBE32-6831-52BE-8752-CB6DBBBABD2C">Resource

dependencies</xref> that are linked. </p> <p>Each dependency must be assigned

a priority value. The priority is used by the PIL when propagating the change

and propagating the request for notifications. Each link stemming from a resource

must have a unique priority value. </p> <p> <b>Note</b>: Resource dependencies

are only supported in the extended version of the PRM. Only long latency resources

are allowed to have dependents and no closed loop dependencies are allowed. </p> <p><b> Register

resource dependencies for dynamic and static resources</b> </p> <p>Static

resources that support dependencies are created and registered with the PRM

during resource controller creation time and are derived from <codeph>DStaticPowerResourceD</codeph>: </p> <codeblock id="GUID-1C7E2D5F-8C76-5D4D-84FA-259DE943742E" xml:space="preserve">DXXXStaticPowerResourceD : public DStaticPowerResourceD

    {

public:

    DXXXStaticPowerResourceD();

    TInt DoRequest(TPowerRequest &req);

    TInt GetInfo(TDes8* aInfo) const;

    TChangePropagationStatus TranslateDependentState(TInt aDepId, TInt aDepState, TInt& aResState);

private:

    TInt iMinLevel;

    TInt iMaxLevel;

    TInt iCurrentLevel;

    ...

    };</codeblock> <p>Dependencies between static resources should be established

by the PSL before registering these resources with the PIL. Use the <xref href="GUID-1CD49D40-1FF9-301C-8160-02A007485ADE.dita#GUID-1CD49D40-1FF9-301C-8160-02A007485ADE/GUID-806D0179-FC98-3106-BCBA-0D3634B43815"><apiname>DStaticPowerResourceD::AddNode()</apiname></xref> function

provided in the base class to establish a dependency link between static resources.

See <xref href="GUID-66FD040B-133E-57CF-80DD-9369F62709C6.dita#GUID-66FD040B-133E-57CF-80DD-9369F62709C6/GUID-A912A328-D646-5516-9731-FFA7F3B2EDDA">Creating

dependencies between static resources</xref>. </p> <p>Dynamic resources that

support dependency are derived from <xref href="GUID-6B224A9F-D2B9-3289-922D-766EF093FCD6.dita"><apiname>DDynamicPowerResourceD</apiname></xref>.

These can be registered and deregistered from the PRM at any time after the

PRM is fully initialised. Dependencies between resources are established by

the client using <xref href="GUID-40AB9EDA-16CB-371E-8759-1D7C99FF9C00.dita#GUID-40AB9EDA-16CB-371E-8759-1D7C99FF9C00/GUID-9C1BF3D5-6F5D-3BEF-9DF0-A5FED85CC718"><apiname>PowerResourceManager::RegisterResourceDependency()</apiname></xref>. </p> <codeblock id="GUID-30B2271B-FA2A-53FE-A1F1-0A3E36B95883" xml:space="preserve">DXXXDynamicPowerResourceD : public DDynamicPowerResourceD

    {

public:

    DXXXDynamicPowerResourceD();

    TInt DoRequest(TPowerRequest &req);

    TInt GetInfo(TDes8* aInfo) const;

    TChangePropagationStatus TranslateDependentState(TInt aDepId, TInt aDepState, TInt& aResState);

private:

    TInt iMinLevel;

    TInt iMaxLevel;

    TInt iCurrentLevel;

    ...

    };</codeblock> <p>Dependencies can be established between a dynamic resource

and a static (dependency enabled) resource using the same API. A client can

deregister dependencies between a pair of dynamic resource (or between a dynamic

and static resource) using <xref href="GUID-40AB9EDA-16CB-371E-8759-1D7C99FF9C00.dita#GUID-40AB9EDA-16CB-371E-8759-1D7C99FF9C00/GUID-127E979F-F540-36E2-A759-8ED408E89F38"><apiname>PowerResourceManager::DeRegisterResourceDependency()</apiname></xref>.

When a dynamic resource that supports dependency deregisters from the PRM,

dependencies are removed automatically by the PIL. </p> <p><b>Change the state

of dependent resources</b> </p> <p>When a state change is requested by a client

on any resource in a dependency tree before proceeding with the change the

PIL must check if the change is allowed by its dependents and the ones it

depends on. The PIL does this by calling the <xref href="GUID-E71F94F6-A4BB-3C85-8E2E-8E3ABAA85897.dita"><apiname>TranslateDependentState()</apiname></xref> function

on each resource. This is a pure virtual function in the base class and must

be implemented in the derived class. </p> <p>This function is called by the

PIL prior to a resource change on any of its dependents. The function returns

one of these values: </p> <ul>

<li id="GUID-CEABEBE0-34BB-5CD0-861E-CDB87A066C8B"><p> <codeph>EChange</codeph> -

If the resource accepts the state change of the dependent resource and, as

a result of the dependent resources state change this resource needs to change

its own state. The new state of this resource is updated in <codeph>aResState</codeph>, </p> </li>

<li id="GUID-A22403B9-38C9-571E-9E14-C7BD1CB032F2"><p> <codeph>ENoChange</codeph> -

if the resource accepts the dependent resources state change and this resource

does not need to change its state, </p> </li>

<li id="GUID-EE30E093-85A0-5205-B1C7-6C36A5410BB1"><p> <codeph>ENotAllowed</codeph> -

if the resource does not accept the dependent resources state change. </p> </li>

</ul> <codeblock id="GUID-453D7F61-4187-50DC-B641-34A06AEB722B" xml:space="preserve">TChangePropagationStatus DXXDependResource::TranslateDependentState(TInt /*aDepId*/, TInt aDepState,

   TInt& aResState)

    {

    /* Switch ON if the dependent resource is ON */

    if((aDepState == 1) && (iCurrentLevel == 0)

        {

        aResState = iMaxLevel;

           return EChange;

           }

    /* Don’t allow dependent to OFF, if this is still ON */

    else if (aDepState == 0) && (iCurrentLevel == 1)

        {

        return ENotAllowed;

        }

    return ENoChange;

    }</codeblock> <p id="GUID-9526B472-00ED-583A-8BFC-C02363D4DFA2"><b>Create

custom resources</b> </p> <p>Clients on a shared resource may have different

requirements on the state of a shared resource. The resource sense is used

by the PIL to determine whose requirement prevails: </p> <ul>

<li id="GUID-495628CC-D257-598F-B420-2784749B1083"><p>positive sense resources

- when shared can have their value increased without prejudice to their clients, </p> </li>

<li id="GUID-D4D7CB6D-F99B-568E-9F38-429196599F4F"><p>negative sense resources

- when shared can have their value decreased without prejudice to their clients, </p> </li>

<li id="GUID-0BB26EA3-F22B-5C7D-8999-14DB75D066CA"><p>custom sense resources

- when shared may be increased or decreased freely by some privileged clients

but not by others, which are bound by the requirement of the privileged clients. </p> </li>

</ul> <p>A custom function must be supplied for every <xref href="GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE.dita#GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE/GUID-4CC0C003-1952-5CAD-A7C5-163C5DDA52C8">Power resources</xref> resource. This function is called by the PIL every

time a change request is issued to determine if the change requested by the

client is allowed as a decision to allow the resource change is determined

solely by the PSL. The resource object contains a pointer that must be set

at construction for custom sense resources by calling this function: </p> <codeblock id="GUID-31716524-4902-5E87-A51F-2EF63DA6D500" xml:space="preserve">inline void SetCustomFunction(TCustomFunction aCustomFunction)</codeblock> <p>This

function sets the custom function for the resource. If a custom function is

not supplied for a custom sense resource the PIL panics during a resource

state change. An example of a custom sense resource is a shared domain clock

when a domain client uses it as a bit clock. </p> <p> <xref href="GUID-5FDBF9F8-9BC4-3E3B-9A28-5046C65788E2.dita"><apiname>TCustomFunction</apiname></xref> is

a function pointer: </p> <codeblock id="GUID-A0ECC7F5-A410-50DA-9723-09C1C080927C" xml:space="preserve">typedef TBool (*TCustomFunction) (TInt&amp; /*aClientId*/,

                                  TUint /*aResourceId*/,

                                  TInt& /*aLevel*/,

                                  TAny* /*aLevelList*/);</codeblock> <p>The

values held in TCustomFunction are: </p> <ul>

<li id="GUID-5E1EF546-098D-5940-8BD0-4AF2B70861E4"><p>the Id of the client

requesting the change, </p> </li>

<li id="GUID-A8E1B48A-C36C-5D88-9388-BE40902832AE"><p>the Id of the resource

on which the change is requested (this allows a single function to handle

multiple resources), </p> </li>

<li id="GUID-CDC2D3F7-2E82-5E56-864B-E0901B57FE83"><p>the level the client

is requesting, </p> </li>

<li id="GUID-57C1C8CC-411D-54B7-9548-2D0C5DFB6B3F"><p>a pointer to the list

of the resource’s <xref href="GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE.dita#GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE/GUID-F47D2098-16A7-5590-A68A-7AE4B2DAB462">client

levels</xref>. </p> </li>

</ul> <p>Custom functions can be set at any time before a resource state change

is requested on a resource. Ideally a custom function is set at resource creation

time in the resource's constructor. </p> <codeblock id="GUID-6B688BFC-8D7A-5D7C-B17D-B4D3579230F4" xml:space="preserve">DBSHLGLSCResource::DBSHLGLSCResource() : DStaticPowerResource(KDBSHLGLSCResource, E_ON), iMinLevel(E_OFF), iMaxLevel(E_ON), iCurrentLevel(E_ON), iPolled(EFalse)

    {

    iFlags = KMultiLevel | KShared | KLongLatencySet | KSenseCustom;

    SetCustomFunction(CustomFunction);

 ...

    }</codeblock> <p>The decision to allow the requested resource state change

is specified in the custom function return value. This is <codeph>ETrue</codeph> if

the change is allowed and <codeph>EFalse</codeph> if the change is not allowed. </p> <p>The

function can change the state of the resource to a level other than the one

requested and can choose a client other than the passed client to hold the <xref href="GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE.dita#GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE/GUID-121C14E3-D446-565E-AAAE-C43C131ACD3C">Caching

the prevailing level</xref> of the resource. </p> <p><b>Supporting dependencies </b> </p> <p>If

the custom sense resource supports dependencies then use the function pointer <xref href="GUID-60A17842-3E3B-3748-8F91-F5ED912E642A.dita"><apiname>TDependencyCustomFunction</apiname></xref>.

This takes an additional parameter that specifies the resource <xref href="GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE.dita#GUID-6E1DE1E4-1B09-541C-8708-9126E69B42CE/GUID-F47D2098-16A7-5590-A68A-7AE4B2DAB462">Client level objects</xref>. </p> </section>

</conbody><related-links>

<link href="GUID-2ECF13A1-9D56-5740-A09F-8267E6A45DD9.dita"><linktext>Porting the

Power Resource Manager</linktext></link>

<link href="GUID-66FD040B-133E-57CF-80DD-9369F62709C6.dita"><linktext>Implement

the PSL for the target</linktext></link>

<link href="GUID-E7F91A65-235D-589C-9A8C-0B207D19A24B.dita"><linktext>Port the

client drivers to use the PRM</linktext></link>

<link href="GUID-C8DF0CB0-92F4-5F9E-A8F1-7DE50954C4F1.dita"><linktext>Debugging

the PRM</linktext></link>

<link href="GUID-66E5F769-1156-54CA-94BC-8912159A1240.dita"><linktext>Testing the

PRM PSL</linktext></link>

</related-links></concept>