/******************************************************************************

 *

 * 

 *

 * Copyright (C) 1997-2008 by Dimitri van Heesch.

 *

 * Permission to use, copy, modify, and distribute this software and its

 * documentation under the terms of the GNU General Public License is hereby 

 * granted. No representations are made about the suitability of this software 

 * for any purpose. It is provided "as is" without express or implied warranty.

 * See the GNU General Public License for more details.

 *

 * Documents produced by Doxygen are derivative works derived from the

 * input used in their production; they are not affected by this license.

 *

 */

/*! \page config Configuration

\section config_format Format

A configuration file is a free-form ASCII text file with a structure

that is similar to that of a Makefile, with the default name \c Doxyfile. It is

parsed by \c doxygen.  The file may contain tabs and newlines for

formatting purposes.  The statements in the file are case-sensitive.

Comments may be placed anywhere within the file (except within quotes).

Comments begin with the \# character and end at the end of the line.

The file essentially consists of a list of assignment statements.

Each statement consists of a \c TAG_NAME written in capitals,

followed by the <code>=</code> character and one or more values. If the same tag

is assigned more than once, the last assignment overwrites any earlier

assignment. For options that take a list as their argument,

the <code>+=</code> operator can be used instead of <code>=</code> to append 

new values to the list. Values are sequences of non-blanks. If the value should 

contain one or more blanks it must be surrounded by quotes ("...").

Multiple lines can be concatenated by inserting a backslash (\\)

as the last character of a line. Environment variables can be expanded 

using the pattern <code>\$(ENV_VARIABLE_NAME)</code>.

You can also include part of a configuration file from another configuration

file using a <code>\@INCLUDE</code> tag as follows:

\verbatim

@INCLUDE = config_file_name

\endverbatim 

The include file is searched in the current working directory. You can 

also specify a list of directories that should be searched before looking

in the current working directory. Do this by putting a <code>\@INCLUDE_PATH</code> tag 

with these paths before the <code>\@INCLUDE</code> tag, e.g:

\verbatim

@INCLUDE_PATH = my_config_dir

\endverbatim

The configuration options can be divided into several categories.

Below is an alphabetical index of the tags that are recognized 

followed by the descriptions of the tags grouped by category.

\secreflist

\refitem cfg_abbreviate_brief ABBREVIATE_BRIEF

\refitem cfg_aliases ALIASES

\refitem cfg_allexternals ALLEXTERNALS 

\refitem cfg_alphabetical_index ALPHABETICAL_INDEX 

\refitem cfg_always_detailed_sec ALWAYS_DETAILED_SEC

\refitem cfg_binary_toc BINARY_TOC

\refitem cfg_brief_member_desc BRIEF_MEMBER_DESC 

\refitem cfg_builtin_stl_support BUILTIN_STL_SUPPORT

\refitem cfg_call_graph CALL_GRAPH

\refitem cfg_caller_graph CALLER_GRAPH

\refitem cfg_case_sense_names CASE_SENSE_NAMES 

\refitem cfg_chm_file CHM_FILE

\refitem cfg_class_diagrams CLASS_DIAGRAMS 

\refitem cfg_class_graph CLASS_GRAPH

\refitem cfg_collaboration_graph COLLABORATION_GRAPH

\refitem cfg_cols_in_alpha_index COLS_IN_ALPHA_INDEX

\refitem cfg_compact_latex COMPACT_LATEX 

\refitem cfg_compact_rtf COMPACT_RTF

\refitem cfg_cpp_cli_support CPP_CLI_SUPPORT

\refitem cfg_create_subdirs CREATE_SUBDIRS

\refitem cfg_directory_graph DIRECTORY_GRAPH

\refitem cfg_disable_index DISABLE_INDEX 

\refitem cfg_distribute_group_doc DISTRIBUTE_GROUP_DOC

\refitem cfg_docset_bundle_id DOCSET_BUNDLE_ID

\refitem cfg_docset_feedname DOCSET_FEEDNAME

\refitem cfg_dot_cleanup DOT_CLEANUP

\refitem cfg_dot_fontname DOT_FONTNAME

\refitem cfg_dot_fontpath DOT_FONTPATH

\refitem cfg_dot_fontsize DOT_FONTSIZE

\refitem cfg_dot_graph_max_nodes DOT_GRAPH_MAX_NODES

\refitem cfg_dot_image_format DOT_IMAGE_FORMAT

\refitem cfg_dot_multi_targets DOT_MULTI_TARGETS

\refitem cfg_dot_path DOT_PATH

\refitem cfg_dot_transparent DOT_TRANSPARENT

\refitem cfg_dotfile_dirs DOTFILE_DIRS

\refitem cfg_doxyfile_encoding DOXYFILE_ENCODING

\refitem cfg_eclipse_doc_id ECLIPSE_DOC_ID

\refitem cfg_enable_preprocessing ENABLE_PREPROCESSING

\refitem cfg_enabled_sections ENABLED_SECTIONS

\refitem cfg_enum_values_per_line ENUM_VALUES_PER_LINE

\refitem cfg_example_path EXAMPLE_PATH

\refitem cfg_example_patterns EXAMPLE_PATTERNS

\refitem cfg_example_recursive EXAMPLE_RECURSIVE

\refitem cfg_exclude EXCLUDE

\refitem cfg_exclude_patterns EXCLUDE_PATTERNS

\refitem cfg_exclude_symlinks EXCLUDE_SYMLINKS

\refitem cfg_expand_as_defined EXPAND_AS_DEFINED

\refitem cfg_expand_only_predef EXPAND_ONLY_PREDEF

\refitem cfg_extension_mapping EXTENSION_MAPPING

\refitem cfg_external_groups EXTERNAL_GROUPS

\refitem cfg_extra_packages EXTRA_PACKAGES

\refitem cfg_extract_all EXTRACT_ALL

\refitem cfg_extract_anon_nspaces EXTRACT_ANON_NSPACES

\refitem cfg_extract_local_classes EXTRACT_LOCAL_CLASSES

\refitem cfg_extract_local_methods EXTRACT_LOCAL_METHODS

\refitem cfg_extract_private EXTRACT_PRIVATE

\refitem cfg_extract_static EXTRACT_STATIC

\refitem cfg_file_patterns FILE_PATTERNS

\refitem cfg_file_version_filter FILE_VERSION_FILTER

\refitem cfg_filter_patterns FILTER_PATTERNS

\refitem cfg_filter_source_files FILTER_SOURCE_FILES

\refitem cfg_force_local_includes FORCE_LOCAL_INCLUDES

\refitem cfg_formula_fontsize FORMULA_FONTSIZE

\refitem cfg_full_path_names FULL_PATH_NAMES

\refitem cfg_generate_autogen_def GENERATE_AUTOGEN_DEF

\refitem cfg_generate_buglist GENERATE_BUGLIST

\refitem cfg_generate_chi GENERATE_CHI

\refitem cfg_generate_deprecatedlist GENERATE_DEPRECIATEDLIST

\refitem cfg_generate_docset GENERATE_DOCSET

\refitem cfg_generate_eclipsehelp GENERATE_ECLIPSEHELP

\refitem cfg_generate_html GENERATE_HTML

\refitem cfg_generate_htmlhelp GENERATE_HTMLHELP

\refitem cfg_generate_latex GENERATE_LATEX

\refitem cfg_generate_legend GENERATE_LEGEND

\refitem cfg_generate_man GENERATE_MAN

\refitem cfg_generate_perlmod GENERATE_PERLMOD

\refitem cfg_generate_qhp GENERATE_QHP

\refitem cfg_generate_rtf GENERATE_RTF

\refitem cfg_generate_tagfile GENERATE_TAGFILE

\refitem cfg_generate_testlist GENERATE_TESTLIST

\refitem cfg_generate_todolist GENERATE_TODOLIST

\refitem cfg_generate_treeview GENERATE_TREEVIEW

\refitem cfg_generate_xml GENERATE_XML

\refitem cfg_graphical_hierarchy GRAPHICAL_HIERARCHY

\refitem cfg_group_graphs GROUP_GRAPHS

\refitem cfg_have_dot HAVE_DOT

\refitem cfg_hhc_location HHC_LOCATION

\refitem cfg_hide_friend_compounds HIDE_FRIEND_COMPOUNDS

\refitem cfg_hide_in_body_docs HIDE_IN_BODY_DOCS

\refitem cfg_hide_scope_names HIDE_SCOPE_NAMES

\refitem cfg_hide_undoc_classes HIDE_UNDOC_CLASSES

\refitem cfg_hide_undoc_members HIDE_UNDOC_MEMBERS

\refitem cfg_hide_undoc_relations HIDE_UNDOC_RELATIONS

\refitem cfg_html_align_members HTML_ALIGN_MEMBERS

\refitem cfg_html_dynamic_sections HTML_DYNAMIC_SECTIONS

\refitem cfg_html_file_extension HTML_FILE_EXTENSION

\refitem cfg_html_footer HTML_FOOTER

\refitem cfg_html_header HTML_HEADER

\refitem cfg_html_output HTML_OUTPUT

\refitem cfg_html_stylesheet HTML_STYLESHEET

\refitem cfg_html_timestamp HTML_TIMESTAMP

\refitem cfg_idl_property_support IDL_PROPERTY_SUPPORT

\refitem cfg_ignore_prefix IGNORE_PREFIX

\refitem cfg_image_path IMAGE_PATH

\refitem cfg_include_graph INCLUDE_GRAPH

\refitem cfg_include_path INCLUDE_PATH

\refitem cfg_included_by_graph INCLUDED_BY_GRAPH

\refitem cfg_inherit_docs INHERIT_DOCS

\refitem cfg_inline_info INLINE_INFO

\refitem cfg_inline_inherited_memb INLINE_INHERITED_MEMB

\refitem cfg_inline_sources INLINE_SOURCES

\refitem cfg_input INPUT

\refitem cfg_input_encoding INPUT_ENCODING

\refitem cfg_input_filter INPUT_FILTER

\refitem cfg_internal_docs INTERNAL_DOCS

\refitem cfg_javadoc_autobrief JAVADOC_AUTOBRIEF

\refitem cfg_latex_batchmode LATEX_BATCHMODE

\refitem cfg_latex_cmd_name LATEX_CMD_NAME

\refitem cfg_latex_header LATEX_HEADER

\refitem cfg_latex_hide_indices LATEX_HIDE_INDICES

\refitem cfg_latex_output LATEX_OUTPUT

\refitem cfg_layout_file LAYOUT_FILE

\refitem cfg_macro_expansion MACRO_EXPANSION

\refitem cfg_makeindex_cmd_name MAKEINDEX_CMD_NAME

\refitem cfg_man_extension MAN_EXTENSION

\refitem cfg_man_links MAN_LINKS

\refitem cfg_man_output MAN_OUTPUT

\refitem cfg_max_dot_graph_depth MAX_DOT_GRAPH_DEPTH

\refitem cfg_max_initializer_lines MAX_INITIALIZER_LINES

\refitem cfg_mscgen_path MSCGEN_PATH

\refitem cfg_multiline_cpp_is_brief MULTILINE_CPP_IS_BRIEF

\refitem cfg_optimize_for_fortran OPTIMIZE_FOR_FORTRAN

\refitem cfg_optimize_output_for_c OPTIMIZE_OUTPUT_FOR_C

\refitem cfg_optimize_output_java OPTIMIZE_OUTPUT_JAVA

\refitem cfg_optimize_output_vhdl OPTIMIZE_OUTPUT_VHDL

\refitem cfg_output_directory OUTPUT_DIRECTORY

\refitem cfg_output_language OUTPUT_LANGUAGE

\refitem cfg_paper_type PAPER_TYPE

\refitem cfg_pdf_hyperlinks PDF_HYPERLINKS

\refitem cfg_perl_path PERL_PATH

\refitem cfg_perlmod_latex PERLMOD_LATEX

\refitem cfg_perlmod_makevar_prefix PERLMOD_MAKEVAR_PREFIX

\refitem cfg_perlmod_pretty PERLMOD_PRETTY

\refitem cfg_predefined PREDEFINED

\refitem cfg_project_name PROJECT_NAME

\refitem cfg_project_number PROJECT_NUMBER

\refitem cfg_qhg_location QHG_LOCATION

\refitem cfg_qhp_cust_filter_attrs QHP_CUST_FILTER_ATTRS

\refitem cfg_qhp_cust_filter_name QHP_CUST_FILTER_NAME

\refitem cfg_qhp_namespace QHP_NAMESPACE

\refitem cfg_qhp_sect_filter_attrs QHP_SECT_FILTER_ATTRS

\refitem cfg_qhp_virtual_folder QHP_VIRTUAL_FOLDER

\refitem cfg_qt_autobrief QT_AUTOBRIEF

\refitem cfg_quiet QUIET

\refitem cfg_recursive RECURSIVE

\refitem cfg_referenced_by_relation REFERENCED_BY_RELATION

\refitem cfg_references_link_source REFERENCES_LINK_SOURCE

\refitem cfg_references_relation REFERENCES_RELATION

\refitem cfg_repeat_brief REPEAT_BRIEF

\refitem cfg_rtf_extensions_file RTF_EXTENSIONS_FILE

\refitem cfg_rtf_hyperlinks RTF_HYPERLINKS

\refitem cfg_rtf_output RTF_OUTPUT

\refitem cfg_rtf_stylesheet_file RTF_STYLESHEET_FILE

\refitem cfg_search_includes SEARCH_INCLUDES

\refitem cfg_searchengine SEARCHENGINE

\refitem cfg_separate_member_pages SEPARATE_MEMBER_PAGES

\refitem cfg_server_based_search SERVER_BASED_SEARCH

\refitem cfg_short_names SHORT_NAMES

\refitem cfg_show_dirs SHOW_DIRECTORIES

\refitem cfg_show_files SHOW_FILES

\refitem cfg_show_include_files SHOW_INCLUDE_FILES

\refitem cfg_show_namespaces SHOW_NAMESPACES

\refitem cfg_show_used_files SHOW_USED_FILES

\refitem cfg_sip_support SIP_SUPPORT

\refitem cfg_skip_function_macros SKIP_FUNCTION_MACROS

\refitem cfg_sort_brief_docs SORT_BRIEF_DOCS

\refitem cfg_sort_by_scope_name SORT_BY_SCOPE_NAME

\refitem cfg_sort_group_names SORT_GROUP_NAMES

\refitem cfg_sort_member_docs SORT_MEMBER_DOCS

\refitem cfg_sort_members_constructors_first SORT_MEMBERS_CTORS_1ST

\refitem cfg_source_browser SOURCE_BROWSER

\refitem cfg_strip_code_comments STRIP_CODE_COMMENTS

\refitem cfg_strip_from_inc_path STRIP_FROM_INC_PATH

\refitem cfg_strip_from_path STRIP_FROM_PATH

\refitem cfg_subgrouping SUBGROUPING

\refitem cfg_symbol_cache_size SYMBOL_CACHE_SIZE

\refitem cfg_tab_size TAB_SIZE

\refitem cfg_tagfiles TAGFILES

\refitem cfg_template_relations TEMPLATE_RELATIONS

\refitem cfg_toc_expand TOC_EXPAND

\refitem cfg_treeview_width TREEVIEW_WIDTH

\refitem cfg_typedef_hides_struct TYPEDEF_HIDES_STRUCT

\refitem cfg_uml_look UML_LOOK

\refitem cfg_use_htags USE_HTAGS

\refitem cfg_use_inline_trees USE_INLINE_TREES

\refitem cfg_use_pdflatex USE_PDFLATEX

\refitem cfg_verbatim_headers VERBATIM_HEADERS

\refitem cfg_warn_format WARN_FORMAT

\refitem cfg_warn_if_doc_error WARN_IF_DOC_ERROR

\refitem cfg_warn_if_undocumented WARN_IF_UNDOCUMENTED

\refitem cfg_warn_logfile WARN_LOGFILE

\refitem cfg_warn_no_paramdoc WARN_NO_PARAMDOC

\refitem cfg_warnings WARNINGS

\refitem cfg_xml_dtd XML_DTD

\refitem cfg_xml_output XML_OUTPUT

\refitem cfg_xml_programlisting XML_PROGRAMLISTING

\refitem cfg_xml_schema XML_SCHEMA

\endsecreflist

\section config_project Project related options

\anchor cfg_doxyfile_encoding

<dl>

<dt>\c DOXYFILE_ENCODING <dd>

 \addindex DOXYFILE_ENCODING

 This tag specifies the encoding used for all characters in the config file that 

 follow. The default is UTF-8 which is also the encoding used for all text before

 the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into

 libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of

 possible encodings.

\anchor cfg_project_name

<dt>\c PROJECT_NAME <dd>

 \addindex PROJECT_NAME

 The \c PROJECT_NAME tag is a single word (or a sequence of words

 surrounded by double-quotes) that should identify the project for which the 

 documentation is generated. This name is used in the title of most 

 generated pages and in a few other places.

\anchor cfg_project_number

<dt>\c PROJECT_NUMBER <dd>

 \addindex PROJECT_NUMBER

 The \c PROJECT_NUMBER tag can be used to enter a project or revision number.

 This could be handy for archiving the generated documentation or

 if some version control system is used.

\anchor cfg_output_directory

<dt>\c OUTPUT_DIRECTORY <dd> 

 \addindex OUTPUT_DIRECTORY

 The \c OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 

 path into which the generated documentation will be written. 

 If a relative path is entered, it will be relative to the location 

 where doxygen was started. If left blank the current directory will be used.

\anchor cfg_create_subdirs

<dt>\c CREATE_SUBDIRS <dd> 

 \addindex CREATE_SUBDIRS

 If the \c CREATE_SUBDIRS tag is set to \c YES, then doxygen will create

 4096 sub-directories (in 2 levels) under the output directory of each output 

 format and will distribute the generated files over these directories. 

 Enabling this option can be useful when feeding doxygen a huge amount of source

 files, where putting all generated files in the same directory would otherwise

 causes performance problems for the file system. 

\anchor cfg_output_language

<dt>\c OUTPUT_LANGUAGE <dd>

 \addindex OUTPUT_LANGUAGE

 The \c OUTPUT_LANGUAGE tag is used to specify the language in which all

 documentation generated by doxygen is written. Doxygen will use this

 information to generate all constant output in the proper language.

 The default language is English, other supported languages are:

 Afrikaans, Arabic, Brazilian, Catalan, Chinese, Croatian, Czech, Danish, Dutch, 

 Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, 

 Lithuanian, Norwegian, Persian, Polish, Portuguese, Romanian, Russian, Serbian, 

 Slovak, Slovene, Spanish, Swedish, and Ukrainian.

\anchor cfg_brief_member_desc

<dt>\c BRIEF_MEMBER_DESC <dd>

 \addindex BRIEF_MEMBER_DESC

 If the \c BRIEF_MEMBER_DESC tag is set to \c YES (the default) doxygen will

 include brief member descriptions after the members that are listed in

 the file and class documentation (similar to JavaDoc).

 Set to NO to disable this.

\anchor cfg_repeat_brief

<dt>\c REPEAT_BRIEF <dd>

 \addindex REPEAT_BRIEF

 If the \c REPEAT_BRIEF tag is set to \c YES (the default) doxygen will 

 prepend the brief description of a member or function before the detailed 

 description 

 \par Note: 

 If both \c HIDE_UNDOC_MEMBERS and \c BRIEF_MEMBER_DESC are set to \c NO, the 

 brief descriptions will be completely suppressed.

\anchor cfg_abbreviate_brief

<dt>\c ABBREVIATE_BRIEF <dd>

 \addindex ABBREVIATE_BRIEF

 This tag implements a quasi-intelligent brief description abbreviator

 that is used to form the text in various listings. Each string

 in this list, if found as the leading text of the brief description, will be

 stripped from the text and the result after processing the whole list, is used

 as the annotated text. Otherwise, the brief description is used as-is. If left

 blank, the following values are used ("\$name" is automatically replaced with the

 name of the entity): "The $name class" "The $name widget" "The $name file"

 "is" "provides" "specifies" "contains" "represents" "a" "an" "the".

\anchor cfg_always_detailed_sec

<dt>\c ALWAYS_DETAILED_SEC <dd>

 \addindex ALWAYS_DETAILED_SEC

 If the \c ALWAYS_DETAILED_SEC and \c REPEAT_BRIEF tags are both set to \c YES then

 doxygen will generate a detailed section even if there is only a brief

 description.

\anchor cfg_inline_inherited_memb

<dt>\c INLINE_INHERITED_MEMB <dd>

\addindex INLINE_INHERITED_MEMB

 If the \c INLINE_INHERITED_MEMB tag is set to \c YES, doxygen will show all inherited

 members of a class in the documentation of that class as if those members were

 ordinary class members. Constructors, destructors and assignment operators of

 the base classes will not be shown.

\anchor cfg_full_path_names

<dt>\c FULL_PATH_NAMES <dd>

 \addindex FULL_PATH_NAMES

 If the \c FULL_PATH_NAMES tag is set to \c YES doxygen will prepend the full

 path before files name in the file list and in the header files. If set

 to NO the shortest path that makes the file name unique will be used

\anchor cfg_strip_from_path

<dt>\c STRIP_FROM_PATH <dd>

 \addindex STRIP_FROM_PATH

 If the \c FULL_PATH_NAMES tag is set to \c YES then the \c STRIP_FROM_PATH tag

 can be used to strip a user-defined part of the path. Stripping is

 only done if one of the specified strings matches the left-hand part of the 

 path. The tag can be used to show relative paths in the file list.

 If left blank the directory from which doxygen is run is used as the

 path to strip.

\anchor cfg_strip_from_inc_path

<dt>\c STRIP_FROM_INC_PATH <dd>

 \addindex STRIP_FROM_INC_PATH

 The \c STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 

 the path mentioned in the documentation of a class, which tells

 the reader which header file to include in order to use a class. 

 If left blank only the name of the header file containing the class

 definition is used. Otherwise one should specify the include paths that 

 are normally passed to the compiler using the -I flag.

\anchor cfg_case_sense_names

<dt>\c CASE_SENSE_NAMES <dd>

 \addindex CASE_SENSE_NAMES

 If the \c CASE_SENSE_NAMES tag is set to \c NO then doxygen

 will only generate file names in lower-case letters. If set to

 \c YES upper-case letters are also allowed. This is useful if you have

 classes or files whose names only differ in case and if your file system

 supports case sensitive file names. Windows users are advised to set this

 option to NO.

\anchor cfg_short_names

<dt>\c SHORT_NAMES <dd>

 \addindex SHORT_NAMES

 If the \c SHORT_NAMES tag is set to \c YES, doxygen will generate much shorter

 (but less readable) file names. This can be useful is your file systems

 doesn't support long names like on DOS, Mac, or CD-ROM.

\anchor cfg_javadoc_autobrief

<dt>\c JAVADOC_AUTOBRIEF <dd>

 \addindex JAVADOC_AUTOBRIEF

  If the \c JAVADOC_AUTOBRIEF is set to \c YES then doxygen

  will interpret the first line (until the first dot) of a JavaDoc-style

  comment as the brief description. If set to NO (the default), the 

  Javadoc-style will behave just like regular Qt-style comments

  (thus requiring an explicit \@brief command for a brief description.)

\anchor cfg_qt_autobrief

<dt>\c QT_AUTOBRIEF <dd>

 \addindex QT_AUTOBRIEF

  If the \c QT_AUTOBRIEF is set to \c YES then doxygen

  will interpret the first line (until the first dot) of a Qt-style

  comment as the brief description. If set to NO (the default), the

  Qt-style will behave just like regular Qt-style comments (thus

  requiring an explicit \\brief command for a brief description.)

\anchor cfg_builtin_stl_support

<dt>\c BUILTIN_STL_SUPPORT <dd>

 \addindex BUILTIN_STL_SUPPORT

 If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to

 include (a tag file for) the STL sources as input, then you should

 set this tag to \c YES in order to let doxygen match functions declarations and

 definitions whose arguments contain STL classes (e.g. func(std::string); v.s.

 func(std::string) {}). This also make the inheritance and collaboration

 diagrams that involve STL classes more complete and accurate.

\anchor cfg_cpp_cli_support

<dt>\c CPP_CLI_SUPPORT <dd>

 \addindex CPP_CLI_SUPPORT

 If you use Microsoft's C++/CLI language, you should set this option to YES to

 enable parsing support.

\anchor cfg_sip_support

<dt>\c SIP_SUPPORT <dd>

 \addindex OPTIMIZE_OUTPUT_SIP

 Set the SIP_SUPPORT tag to YES if your project consists 

 of <a href="http://www.riverbankcomputing.co.uk/sip/">sip</a> sources only. 

 Doxygen will parse them like normal C++ but will assume all classes use public 

 instead of private inheritance when no explicit protection keyword is present. 

\anchor cfg_idl_property_support

<dt>\c IDL_PROPERTY_SUPPORT <dd>

 \addindex IDL_PROPERTY_SUPPORT

 For Microsoft's IDL there are propget and propput attributes to indicate getter

 and setter methods for a property. Setting this option to \c YES (the default)

 will make doxygen to replace the get and set methods by a property in the

 documentation. This will only work if the methods are indeed getting or 

 setting a simple type. If this is not the case, or you want to show the 

 methods anyway, you should set this option to \c NO.

\anchor cfg_distribute_group_doc

<dt>\c DISTRIBUTE_GROUP_DOC <dd>

 \addindex DISTRIBUTE_GROUP_DOC

 If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

 tag is set to YES, then doxygen will reuse the documentation of the first

 member in the group (if any) for the other members of the group. By default

 all members of a group must be documented explicitly.

\anchor cfg_multiline_cpp_is_brief

<dt>\c MULTILINE_CPP_IS_BRIEF <dd>

 \addindex MULTILINE_CPP_IS_BRIEF

  The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen

  treat a multi-line C++ special comment block (i.e. a block of //! or ///

  comments) as a brief description. This used to be the default behaviour.

  The new default is to treat a multi-line C++ comment block as a detailed

  description. Set this tag to YES if you prefer the old behaviour instead.

  Note that setting this tag to YES also means that rational rose comments

  are not recognized any more.

<!--

\anchor cfg_details_at_top

<dt>\c DETAILS_AT_TOP <dd>

 \addindex DETAILS_AT_TOP

  If the DETAILS_AT_TOP tag is set to YES then Doxygen

  will output the detailed description near the top, like JavaDoc.

  If set to NO, the detailed description appears after the member

  documentation.

-->

\anchor cfg_inherit_docs

<dt>\c INHERIT_DOCS <dd>

 \addindex INHERIT_DOCS

 If the \c INHERIT_DOCS tag is set to \c YES (the default) then an undocumented

 member inherits the documentation from any documented member that it

 re-implements.

\anchor cfg_separate_member_pages

<dt>\c SEPARATE_MEMBER_PAGES <dd>

 \addindex SEPARATE_MEMBER_PAGES

 If the \c SEPARATE_MEMBER_PAGES tag is set to \c YES, then doxygen will produce

 a new page for each member. If set to \c NO, the documentation of a member will

 be part of the file/class/namespace that contains it.

\anchor cfg_tab_size

<dt>\c TAB_SIZE <dd>

 \addindex TAB_SIZE

 the \c TAB_SIZE tag can be used to set the number of spaces in a tab.

 Doxygen uses this value to replace tabs by spaces in code fragments.

\anchor cfg_aliases

<dt>\c ALIASES <dd>

 \addindex ALIASES

 This tag can be used to specify a number of aliases that acts 

 as commands in the documentation. An alias has the form 

\verbatim

 name=value

\endverbatim

 For example adding 

\verbatim

 "sideeffect=\par Side Effects:\n" 

\endverbatim