|
1 <configuration name="Default CommsDat settings" xmlns="http://www.s60.com/xml/confml/2" xmlns:xi="http://www.w3.org/2001/XInclude" xmlns:xlink="http://www.w3.org/1999/xlink"> |
|
2 <feature name="CommsDat generation" ref="KCRUidCommsDatCreator"> |
|
3 <desc>Used to configure whether CommsDat generation from these settings is enabled.</desc> |
|
4 <setting name="CommsDat generation enabled" ref="KCommsDatCreatorInputFileName" type="string"> |
|
5 <desc>This is the master switch that determines whether CommsDat is created in the first boot |
|
6 of the device based on Configuration Tool output. Set this to Yes if you are creating variant |
|
7 and need to configure anything under Default CommsDat settings.</desc> |
|
8 <option name="No" value="" /> |
|
9 <option name="Yes" value="VariantData_commsdat.xml" /> |
|
10 </setting> |
|
11 <setting name="CommsDatCreator startup status flag" readOnly="true" ref="KCommsDatCreatorStartupStatus" type="int"> |
|
12 <desc>Read-only flag that indicates the CommsDatCreator start-up status in runtime.</desc> |
|
13 </setting> |
|
14 </feature> |
|
15 <feature name="Global settings" ref="Global"> |
|
16 <desc> |
|
17 Global networking related settings not tied to individual connection methods. |
|
18 </desc> |
|
19 <setting name="Attachmode" ref="Attachmode" type="selection"> |
|
20 <desc> |
|
21 GPRS attach mode (attach when needed/when available). |
|
22 </desc> |
|
23 <option name="When available" value="whenavailable" /> |
|
24 <option name="When needed" value="whenneeded" /> |
|
25 </setting> |
|
26 <setting name="Default access point" ref="DefaultAP" type="string"> |
|
27 <desc> |
|
28 Default GPRS access point. Used when the phone is used as a modem for a PC. |
|
29 The corresponding UI setting is Connection-Packet data-Access point. |
|
30 </desc> |
|
31 </setting> |
|
32 <setting name="Default icon for DNs" ref="DefaultDnIcon" type="selection"> |
|
33 <desc> |
|
34 Default icon for destination networks. |
|
35 </desc> |
|
36 <option name="internet" value="0" /> |
|
37 <option name="wap" value="1" /> |
|
38 <option name="mms" value="2" /> |
|
39 <option name="intranet" value="3" /> |
|
40 <option name="operator" value="4" /> |
|
41 <option name="icon1" value="5" /> |
|
42 <option name="icon2" value="6" /> |
|
43 <option name="icon3" value="7" /> |
|
44 <option name="icon4" value="8" /> |
|
45 <option name="icon5" value="9" /> |
|
46 <option name="icon6" value="10" /> |
|
47 <option name="default" value="11" /> |
|
48 </setting> |
|
49 <setting name="LAN bearer default priority" ref="PriorityLan" type="string"> |
|
50 <desc> |
|
51 Default priority for LAN bearer type. |
|
52 </desc> |
|
53 </setting> |
|
54 <setting name="WLAN bearer default priority" ref="PriorityWlan" type="string"> |
|
55 <desc> |
|
56 Default priority for WLAN bearer type. |
|
57 </desc> |
|
58 </setting> |
|
59 <setting name="PAN bearer default priority" ref="PriorityPan" type="string"> |
|
60 <desc> |
|
61 Default priority for PAN bearer type. |
|
62 </desc> |
|
63 </setting> |
|
64 <setting name="Outgoing GPRS bearer default priority" ref="PriorityGprsOut" type="string"> |
|
65 <desc> |
|
66 Default priority for outgoing GPRS bearer type. |
|
67 </desc> |
|
68 </setting> |
|
69 <setting name="Incoming GPRS bearer default priority" ref="PriorityGprsIn" type="string"> |
|
70 <desc> |
|
71 Default priority for incoming GPRS bearer type. |
|
72 </desc> |
|
73 </setting> |
|
74 <setting name="CDMA2000 bearer default priority" ref="PriorityCdma2k" type="string"> |
|
75 <desc> |
|
76 Default priority for CDMA 2000 bearer type. |
|
77 </desc> |
|
78 </setting> |
|
79 <setting name="DialOut ISP bearer default priority" ref="PriorityDialOut" type="string"> |
|
80 <desc> |
|
81 Default priority for outgoing dial bearer type. |
|
82 </desc> |
|
83 </setting> |
|
84 <setting name="DialIn ISP bearer default priority" ref="PriorityDialIn" type="string"> |
|
85 <desc> |
|
86 Default priority for incoming dial bearer type. |
|
87 </desc> |
|
88 </setting> |
|
89 <setting name="VPN bearer default priority" ref="PriorityVpn" type="string"> |
|
90 <desc> |
|
91 Default priority for VPN bearer type. |
|
92 </desc> |
|
93 </setting> |
|
94 <setting name="MIP bearer default priority" ref="PriorityMip" type="string"> |
|
95 <desc> |
|
96 Default priority for MIP bearer type. |
|
97 </desc> |
|
98 </setting> |
|
99 <setting name="LAN bearer default UI priority" ref="UIPriorityLan" type="string"> |
|
100 <desc> |
|
101 Default UI priority of LAN connection. |
|
102 </desc> |
|
103 </setting> |
|
104 <setting name="WLAN bearer default UI priority" ref="UIPriorityWlan" type="string"> |
|
105 <desc> |
|
106 Default UI priority for WLAN bearer type. |
|
107 </desc> |
|
108 </setting> |
|
109 <setting name="PAN bearer default UI priority" ref="UIPriorityPan" type="string"> |
|
110 <desc> |
|
111 Default UI priority for PAN bearer type. |
|
112 </desc> |
|
113 </setting> |
|
114 <setting name="Outgoing GPRS bearer default UI priority" ref="UIPriorityGprsOut" type="string"> |
|
115 <desc> |
|
116 Default UI priority for outgoing GPRS bearer type. |
|
117 </desc> |
|
118 </setting> |
|
119 <setting name="Incoming GPRS bearer default UI priority" ref="UIPriorityGprsIn" type="string"> |
|
120 <desc> |
|
121 Default UI priority for incoming GPRS bearer type. |
|
122 </desc> |
|
123 </setting> |
|
124 <setting name="CDMA2000 bearer default UI priority" ref="UIPriorityCdma2k" type="string"> |
|
125 <desc> |
|
126 Default UI priority for CDMA 2000 bearer type. |
|
127 </desc> |
|
128 </setting> |
|
129 <setting name="DialOut ISP bearer default UI priority" ref="UIPriorityDialOut" type="string"> |
|
130 <desc> |
|
131 Default UI priority for outgoing dial bearer type. |
|
132 </desc> |
|
133 </setting> |
|
134 <setting name="DialIn ISP bearer default UI priority" ref="UIPriorityDialIn" type="string"> |
|
135 <desc> |
|
136 Default UI priority for incoming dial bearer type. |
|
137 </desc> |
|
138 </setting> |
|
139 <setting name="VPN bearer default UI priority" ref="UIPriorityVpn" type="string"> |
|
140 <desc> |
|
141 Default UI priority for VPN bearer type. |
|
142 </desc> |
|
143 </setting> |
|
144 <setting name="MIP bearer default UI priority" ref="UIPriorityMip" type="string"> |
|
145 <desc> |
|
146 Default UI priority for MIP bearer type. |
|
147 </desc> |
|
148 </setting> |
|
149 <setting name="Default connection type" ref="DefaultConnectionType" type="selection"> |
|
150 <desc> |
|
151 Specifies how the applications' default connection is specified. |
|
152 </desc> |
|
153 <option name="Ask once" value="Ask once" /> |
|
154 <option name="Always ask" value="Always ask" /> |
|
155 <option name="Destination" value="Destination" /> |
|
156 <option name="Connection method" value="Connection method" /> |
|
157 </setting> |
|
158 <setting name="Default connection name" ref="DefaultConnectionName" type="string"> |
|
159 <desc> |
|
160 The name of the default connection (connection method or destination network). |
|
161 Default connection type parameter needs to be set accordingly. |
|
162 </desc> |
|
163 </setting> |
|
164 <setting name="GPRS last socket activity timeout" ref="GprsLastSocketActivityTimeout" type="int"> |
|
165 <desc> |
|
166 For GPRS the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time. |
|
167 Leave empty to use the product default value. |
|
168 </desc> |
|
169 </setting> |
|
170 <setting name="GPRS last session closed timeout" ref="GprsLastSessionClosedTimeout" type="int"> |
|
171 <desc> |
|
172 For GPRS the time (in seconds) to stay online when session has closed. -1 for unlimited time. |
|
173 Leave empty to use the product default value. |
|
174 </desc> |
|
175 </setting> |
|
176 <setting name="GPRS last socket closed timeout" ref="GprsLastSocketClosedTimeout" type="int"> |
|
177 <desc> |
|
178 For GPRS the time (in seconds) to stay online when socket has closed. -1 for unlimited time. |
|
179 Leave empty to use the product default value. |
|
180 </desc> |
|
181 </setting> |
|
182 <setting name="CSD last socket activity timeout" ref="CsdLastSocketActivityTimeout" type="int"> |
|
183 <desc> |
|
184 For CSD the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time. |
|
185 Leave empty to use the product default value. |
|
186 </desc> |
|
187 </setting> |
|
188 <setting name="CSD last session closed timeout" ref="CsdLastSessionClosedTimeout" type="int"> |
|
189 <desc> |
|
190 For CSD the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time. |
|
191 Leave empty to use the product default value. |
|
192 </desc> |
|
193 </setting> |
|
194 <setting name="CSD last socket closed timeout" ref="CsdLastSocketClosedTimeout" type="int"> |
|
195 <desc> |
|
196 For CSD the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time. |
|
197 Leave empty to use the product default value. |
|
198 </desc> |
|
199 </setting> |
|
200 <setting name="WLAN last socket activity timeout" ref="WlanLastSocketActivityTimeout" type="int"> |
|
201 <desc> |
|
202 For WLAN the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time. |
|
203 Leave empty to use the product default value. |
|
204 </desc> |
|
205 </setting> |
|
206 <setting name="WLAN last session closed timeout" ref="WlanLastSessionClosedTimeout" type="int"> |
|
207 <desc> |
|
208 For WLAN the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time. |
|
209 Leave empty to use the product default value. |
|
210 </desc> |
|
211 </setting> |
|
212 <setting name="WLAN last socket closed timeout" ref="WlanLastSocketClosedTimeout" type="int"> |
|
213 <desc> |
|
214 For WLAN the time (in seconds) to stay online when all socket activity has ceased. -1 for unlimited time. |
|
215 Leave empty to use the product default value. |
|
216 </desc> |
|
217 </setting> |
|
218 <setting name="WLAN background scan interval" ref="WlanBGScanInterval" type="selection"> |
|
219 <desc> |
|
220 How often WLAN networks are scanned when idle. |
|
221 </desc> |
|
222 <option name="Never" value="0" /> |
|
223 <option name="Every minute" value="60" /> |
|
224 <option name="Every 2 minutes" value="120" /> |
|
225 <option name="Every 5 minutes" value="300" /> |
|
226 <option name="Every 10 minutes" value="600" /> |
|
227 </setting> |
|
228 <setting name="WLAN use default settings" ref="WlanUseDefSettings" type="selection"> |
|
229 <desc>Defines whether default values are being used for the advanced WLAN settings (recommended). </desc> |
|
230 <option name="No" value="0" /> |
|
231 <option name="Yes" value="1" /> |
|
232 </setting> |
|
233 <setting name="WLAN long retry limit" ref="WlanLongRetry" type="int"> |
|
234 <desc>Defines how many times packets bigger than RTS Threshold are been resent.</desc> |
|
235 </setting> |
|
236 <setting name="WLAN short retry limit" ref="WlanShortRetry" type="int"> |
|
237 <desc>Defines how many times packets smaller than RTS Threshold are been resent.</desc> |
|
238 </setting> |
|
239 <setting name="WLAN RTS threshold" ref="WlanRTS" type="int"> |
|
240 <desc>Minimum size of a packet for which CTS/RTS handshake has been used.</desc> |
|
241 </setting> |
|
242 <setting name="WLAN TX power level" ref="WlanTxPowerLevel" type="selection"> |
|
243 <desc>Transmission power level in use. In mWs. 4, 10 or 100 mW.</desc> |
|
244 <option name="100 mW" value="100" /> |
|
245 <option name="10 mW" value="10" /> |
|
246 <option name="4 mW" value="4" /> |
|
247 </setting> |
|
248 <setting name="WLAN allow radio measurements" ref="WlanRadioMeasurements" type="selection"> |
|
249 <desc>Defines whether the CCX radio measurements are allowed.</desc> |
|
250 <option name="No" value="0" /> |
|
251 <option name="Yes" value="1" /> |
|
252 </setting> |
|
253 <setting name="WLAN power save" ref="WlanPowerMode" type="selection"> |
|
254 <desc>Defines whether power saving methods are active. Disabling WLAN |
|
255 power save might increase interoperability but will dramatically shorten battery life.</desc> |
|
256 <option name="On" value="1" /> |
|
257 <option name="Off" value="0" /> |
|
258 </setting> |
|
259 </feature> |
|
260 <feature name="GPRS Access Points" ref="APs"> |
|
261 <desc>GPRS connection method (CM) definitions</desc> |
|
262 <setting maxOccurs="99" minOccurs="0" name="GPRS" ref="AP" type="sequence"> |
|
263 <setting name="Connection Name" ref="ConnectionName" type="string"> |
|
264 <desc>The CM name that is visible to the user.</desc> |
|
265 </setting> |
|
266 <setting name="Connection ID" ref="ConnectionId" type="int"> |
|
267 <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically. |
|
268 Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! |
|
269 So a good idea is to either specify all the IDs manually or none at all.</desc> |
|
270 </setting> |
|
271 <setting name="Protected" ref="Protected" type="selection"> |
|
272 <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc> |
|
273 <option name="No" value="No" /> |
|
274 <option name="Yes" value="Yes" /> |
|
275 </setting> |
|
276 <setting name="Hidden" ref="Hidden" type="selection"> |
|
277 <desc>Defines whether connection method is hidden.</desc> |
|
278 <option name="No" value="No" /> |
|
279 <option name="Yes" value="Yes" /> |
|
280 </setting> |
|
281 <setting name="Hidden Agent" ref="HiddenAgent" type="selection"> |
|
282 <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc> |
|
283 <option name="No" value="No" /> |
|
284 <option name="Yes" value="Yes" /> |
|
285 </setting> |
|
286 <setting name="Highlighted" ref="Highlighted" type="selection"> |
|
287 <desc>Connection method is highlighted or not.</desc> |
|
288 <option name="No" value="No" /> |
|
289 <option name="Yes" value="Yes" /> |
|
290 </setting> |
|
291 <setting name="Seamlessness" ref="Seamlessness" type="selection"> |
|
292 <desc>Defines whether an IAP can be roamed to.</desc> |
|
293 <option name="Confirm First" value="ConfirmFirst" /> |
|
294 <option name="Show Progress" value="ShowProgress" /> |
|
295 </setting> |
|
296 <setting name="Network type" ref="NetworkType" type="selection"> |
|
297 <desc>Addressing that the network uses.</desc> |
|
298 <option name="IPv4" value="IPv4" /> |
|
299 <option name="IPv6" value="IPv6" /> |
|
300 </setting> |
|
301 <setting name="GPRS Access Point Name" ref="GPRS_AP_Name" type="string"> |
|
302 <desc>The access point name for this GPRS connection</desc> |
|
303 </setting> |
|
304 <setting name="User Name" ref="UserName" type="string"> |
|
305 <desc>User name</desc> |
|
306 </setting> |
|
307 <setting name="Prompt Password" ref="PromptPassword" type="selection"> |
|
308 <desc>Prompt password at connection time.</desc> |
|
309 <option name="No" value="No" /> |
|
310 <option name="Yes" value="Yes" /> |
|
311 </setting> |
|
312 <setting name="Password" ref="Password" type="string"> |
|
313 <desc>Password.</desc> |
|
314 </setting> |
|
315 <setting name="Password authentication type" ref="PasswordAuthenticationType" type="selection"> |
|
316 <desc>Password authentication method.</desc> |
|
317 <option name="Normal" value="Normal" /> |
|
318 <option name="Secure" value="Secure" /> |
|
319 </setting> |
|
320 <setting name="WAP Gateway IP" ref="WAPGatewayIP" type="string"> |
|
321 <desc>WAP gateway IP address.</desc> |
|
322 </setting> |
|
323 <setting name="Starting Page" ref="StartingPage" type="string"> |
|
324 <desc>Start page of the connection method. In URL format.</desc> |
|
325 </setting> |
|
326 <setting name="WTLS Security" ref="WTLS_Security" type="selection"> |
|
327 <desc>Attempts a secure WTLS connection to the gateway.</desc> |
|
328 <option name="On" value="On" /> |
|
329 <option name="Off" value="Off" /> |
|
330 </setting> |
|
331 <setting name="Connection type" ref="WAP_ConnectionType" type="selection"> |
|
332 <desc>Indicates whether a connection-oriented or connectionless API should be used.</desc> |
|
333 <option name="Continuous" value="Continuous" /> |
|
334 <option name="Temporary" value="Temporary" /> |
|
335 </setting> |
|
336 <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string"> |
|
337 <desc>IP address of the interface. |
|
338 Typically allocated automatically so this can be left empty.</desc> |
|
339 </setting> |
|
340 <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string"> |
|
341 <desc>Address of the primary DNS server that resolves host names. |
|
342 Typically allocated automatically so this can be left empty.</desc> |
|
343 </setting> |
|
344 <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string"> |
|
345 <desc>Address of the secondary DNS server to connect if the primary DNS server is not available. |
|
346 Typically allocated automatically so this can be left empty.</desc> |
|
347 </setting> |
|
348 <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string"> |
|
349 <desc>Address of the primary DNS server that resolves host names. |
|
350 Typically allocated automatically so this can be left empty.</desc> |
|
351 </setting> |
|
352 <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string"> |
|
353 <desc>Address of the secondary DNS server to connect if the primary DNS server is not available. |
|
354 Typically allocated automatically so this can be left empty.</desc> |
|
355 </setting> |
|
356 <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string"> |
|
357 <desc>Address of the HTTP/HTTPS proxy server.</desc> |
|
358 </setting> |
|
359 <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string"> |
|
360 <desc>Port number of the HTTP/HTTPS proxy server.</desc> |
|
361 </setting> |
|
362 <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string"> |
|
363 <desc>Name of the protocol for which this proxy can be used. |
|
364 Typically http or https.</desc> |
|
365 </setting> |
|
366 <setting name="GPRS Use EDGE" ref="GprsUseEdge" type="selection"> |
|
367 <desc>Allow EDGE usage.</desc> |
|
368 <option name="Yes" value="Yes" /> |
|
369 <option name="No" value="No" /> |
|
370 </setting> |
|
371 <setting name="ISP Type" ref="IspType" type="selection"> |
|
372 <desc>Specifies the service provider type. Used when filtering connection methods for certain purpose.</desc> |
|
373 <option name="Internet" value="0" /> |
|
374 <option name="WAP" value="1" /> |
|
375 <option name="Both" value="2" /> |
|
376 </setting> |
|
377 </setting> |
|
378 </feature> |
|
379 <feature name="WLAN Access Points" ref="WLAN_APs"> |
|
380 <desc>WLAN connection method (CM) definitions</desc> |
|
381 <setting maxOccurs="99" minOccurs="0" name="WLAN" ref="WLAN_AP" type="sequence"> |
|
382 <setting name="Connection Name" ref="ConnectionName" type="string"> |
|
383 <desc>The CM name that is visible to the user.</desc> |
|
384 </setting> |
|
385 <setting name="Connection ID" ref="ConnectionId" type="int"> |
|
386 <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically. |
|
387 Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! |
|
388 So a good idea is to either specify all the IDs manually or none at all.</desc> |
|
389 </setting> |
|
390 <setting name="Protected" ref="Protected" type="selection"> |
|
391 <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc> |
|
392 <option name="No" value="No" /> |
|
393 <option name="Yes" value="Yes" /> |
|
394 </setting> |
|
395 <setting name="Hidden" ref="Hidden" type="selection"> |
|
396 <desc>Defines whether connection method is hidden.</desc> |
|
397 <option name="No" value="No" /> |
|
398 <option name="Yes" value="Yes" /> |
|
399 </setting> |
|
400 <setting name="Hidden Agent" ref="HiddenAgent" type="selection"> |
|
401 <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc> |
|
402 <option name="No" value="No" /> |
|
403 <option name="Yes" value="Yes" /> |
|
404 </setting> |
|
405 <setting name="Highlighted" ref="Highlighted" type="selection"> |
|
406 <desc>Connection method is highlighted or not.</desc> |
|
407 <option name="No" value="No" /> |
|
408 <option name="Yes" value="Yes" /> |
|
409 </setting> |
|
410 <setting name="Seamlessness" ref="Seamlessness" type="selection"> |
|
411 <desc>Defines whether an IAP can be roamed to.</desc> |
|
412 <option name="Confirm First" value="ConfirmFirst" /> |
|
413 <option name="Show Progress" value="ShowProgress" /> |
|
414 </setting> |
|
415 <setting name="Network Name" ref="NetworkName" type="string"> |
|
416 <desc>Service set identifier (SSID) of the primary WLAN network.</desc> |
|
417 </setting> |
|
418 <setting name="Starting Page" ref="StartingPage" type="string"> |
|
419 <desc>Start page of the connection method. In URL format.</desc> |
|
420 </setting> |
|
421 <setting name="Network Mode" ref="NetworkMode" type="string"> |
|
422 <desc>Determines the network infrastructure. |
|
423 If there is a WLAN access point in the network then this should be Infrastructure.</desc> |
|
424 <option name="Infrastructure" value="Infrastructure" /> |
|
425 <option name="Ad-hoc" value="Ad-hoc" /> |
|
426 </setting> |
|
427 <setting name="Security Mode" ref="SecurityMode" type="selection"> |
|
428 <desc>Security mode of the WLAN network.</desc> |
|
429 <option name="Open" value="Open" /> |
|
430 <option name="WEP" value="WEP" /> |
|
431 <option name="802.1x" value="802.1x" /> |
|
432 <option name="WPA" value="WPA" /> |
|
433 <option name="WPA2" value="WPA2" /> |
|
434 </setting> |
|
435 <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string"> |
|
436 <desc>Address of the primary DNS server that resolves host names. |
|
437 Typically allocated automatically in which case this should be empty.</desc> |
|
438 </setting> |
|
439 <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string"> |
|
440 <desc>Address of the secondary DNS server to connect if the primary DNS server is not available. |
|
441 Typically allocated automatically in which case this should be empty.</desc> |
|
442 </setting> |
|
443 <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string"> |
|
444 <desc>Address of the primary DNS server that resolves host names. |
|
445 Typically allocated automatically in which case this should be empty.</desc> |
|
446 </setting> |
|
447 <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string"> |
|
448 <desc>Address of the secondary DNS server to connect if the primary DNS server is not available. |
|
449 Typically allocated automatically in which case this should be empty.</desc> |
|
450 </setting> |
|
451 <setting name="WLAN IP Gateway Address" ref="WlanIpGatewayAddress" type="string"> |
|
452 <desc>The gateway IP address. |
|
453 Typically allocated automatically in which case this should be empty.</desc> |
|
454 </setting> |
|
455 <setting name="Wlan IP Net Mask" ref="WlanIpNetMask" type="string"> |
|
456 <desc>Network mask. Typically allocated automatically in which case this should be empty.</desc> |
|
457 </setting> |
|
458 <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string"> |
|
459 <desc>Address of the HTTP/HTTPS proxy server.</desc> |
|
460 </setting> |
|
461 <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string"> |
|
462 <desc>Port number of the HTTP/HTTPS proxy server.</desc> |
|
463 </setting> |
|
464 <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string"> |
|
465 <desc>Name of the protocol for which this proxy can be used. |
|
466 Typically http or https.</desc> |
|
467 </setting> |
|
468 <setting name="WLAN Scan SSID" ref="WLANScanSSID" type="selection"> |
|
469 <desc>Defines whether the SSID should be actively scanned. |
|
470 This is needed if the SSID is hidden (not broadcasted by the AP) </desc> |
|
471 <option name="No" value="No" /> |
|
472 <option name="Yes" value="Yes" /> |
|
473 </setting> |
|
474 <setting name="WLAN Channel ID" ref="WlanChannelId" type="string"> |
|
475 <desc> |
|
476 802.11 Channel ID (1-14). Used only when connecting/setting up adhoc network. |
|
477 </desc> |
|
478 </setting> |
|
479 <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string"> |
|
480 <desc>IP address of the interface. |
|
481 Typically allocated automatically so this can be left empty.</desc> |
|
482 </setting> |
|
483 <setting name="WEP Key In Use" ref="WEPKeyInUse" type="selection"> |
|
484 <desc>Index of default WEP key. Used only when security mode is WEP.</desc> |
|
485 <option name="key1" value="key1" /> |
|
486 <option name="key2" value="key2" /> |
|
487 <option name="key3" value="key3" /> |
|
488 <option name="key4" value="key4" /> |
|
489 </setting> |
|
490 <setting name="WEP Auth Type" ref="WEPAuthType" type="selection"> |
|
491 <desc>WEP authentication mode. Only used when security mode is WEP.</desc> |
|
492 <option name="Shared" value="Shared" /> |
|
493 <option name="Open" value="Open" /> |
|
494 </setting> |
|
495 <setting name="WEP Key1 Length" ref="WEPKey1Length" type="selection"> |
|
496 <desc>WEP key length in bits.</desc> |
|
497 <option name="64" value="64" /> |
|
498 <option name="128" value="128" /> |
|
499 <option name="256" value="256" /> |
|
500 </setting> |
|
501 <setting name="WEP Key1 Format" ref="WEPKey1Format" type="selection"> |
|
502 <desc>WEP key format.</desc> |
|
503 <option name="ASCII" value="ASCII" /> |
|
504 <option name="Hexadecimal" value="Hexadecimal" /> |
|
505 </setting> |
|
506 <setting name="WEP Key1 Data" ref="WEPKey1Data" type="string"> |
|
507 <desc>WEP key data (in format specified by corresponding WEP key format field).</desc> |
|
508 </setting> |
|
509 <setting name="WEP Key2 Length" ref="WEPKey2Length" type="selection"> |
|
510 <desc>WEP key length in bits.</desc> |
|
511 <option name="64" value="64" /> |
|
512 <option name="128" value="128" /> |
|
513 <option name="256" value="256" /> |
|
514 </setting> |
|
515 <setting name="WEP Key2 Format" ref="WEPKey2Format" type="selection"> |
|
516 <desc>WEP key format.</desc> |
|
517 <option name="ASCII" value="ASCII" /> |
|
518 <option name="Hexadecimal" value="Hexadecimal" /> |
|
519 </setting> |
|
520 <setting name="WEP Key2 Data" ref="WEPKey2Data" type="string"> |
|
521 <desc>WEP key data (in format specified by corresponding WEP key format field).</desc> |
|
522 </setting> |
|
523 <setting name="WEP Key3 Length" ref="WEPKey3Length" type="selection"> |
|
524 <desc>WEP key length in bits.</desc> |
|
525 <option name="64" value="64" /> |
|
526 <option name="128" value="128" /> |
|
527 <option name="256" value="256" /> |
|
528 </setting> |
|
529 <setting name="WEP Key3 Format" ref="WEPKey3Format" type="selection"> |
|
530 <desc>WEP key format.</desc> |
|
531 <option name="ASCII" value="ASCII" /> |
|
532 <option name="Hexadecimal" value="Hexadecimal" /> |
|
533 </setting> |
|
534 <setting name="WEP Key3 Data" ref="WEPKey3Data" type="string"> |
|
535 <desc>WEP key data (in format specified by corresponding WEP key format field).</desc> |
|
536 </setting> |
|
537 <setting name="WEP Key4 Length" ref="WEPKey4Length" type="selection"> |
|
538 <desc>WEP key length in bits.</desc> |
|
539 <option name="64" value="64" /> |
|
540 <option name="128" value="128" /> |
|
541 <option name="256" value="256" /> |
|
542 </setting> |
|
543 <setting name="WEP Key4 Format" ref="WEPKey4Format" type="selection"> |
|
544 <desc>WEP key format.</desc> |
|
545 <option name="ASCII" value="ASCII" /> |
|
546 <option name="Hexadecimal" value="Hexadecimal" /> |
|
547 </setting> |
|
548 <setting name="WEP Key4 Data" ref="WEPKey4Data" type="string"> |
|
549 <desc>WEP key data (in format specified by corresponding WEP key format field).</desc> |
|
550 </setting> |
|
551 <setting name="WPA Pre-shared Key" ref="WPAPresharedKey" type="string"> |
|
552 <desc>WPA/WPA2 pre-shared key in plain text. ASCII character set values between 32-126 must be used. Minimum length is 8 characters and maximum 63. |
|
553 You need to also define the WPA pre-shared key length field accordingly</desc> |
|
554 </setting> |
|
555 <setting name="WPA Use of Pre-shared Key" ref="WPAUseOfPresharedKey" type="selection"> |
|
556 <desc>Specifies that when the security mode is WPA or WPA2 if the PSK mode is enabled. |
|
557 If this is off then EAP mode is used and the list of EAPs needs to be defined.</desc> |
|
558 <option name="No" value="No" /> |
|
559 <option name="Yes" value="Yes" /> |
|
560 </setting> |
|
561 <setting name="WPA Pre-shared key length" ref="WPAKeyLength" type="int"> |
|
562 <desc>The length of the specified pre-shared key (in WPA pre-shared key field)</desc> |
|
563 </setting> |
|
564 <setting name="WPA List Of EAPs" ref="WPAListOfEAPs" type="string"> |
|
565 <desc> |
|
566 A list of Extensible Authentication Protocols (EAPs) in use. The format is +xxx,+xxx,+xxx where xxx indicates the enabled EAP method ID as |
|
567 specified in the IANA registry: http://www.iana.org/assignments/eap-numbers. For example to enable EAP-SIM the string needs to be "+018". |
|
568 The list is in priority order, highest priority first. |
|
569 </desc> |
|
570 </setting> |
|
571 <setting name="EAP-GTC user name" ref="EapGtcUsername" type="string"> |
|
572 <desc>The username used with EAP-GTC.</desc> |
|
573 </setting> |
|
574 <setting name="EAP-GTC session validity time" ref="EapGtcSessionValidityTime" type="int"> |
|
575 <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear).</desc> |
|
576 </setting> |
|
577 <setting name="EAP-GTC tunneling method" ref="EapGtcEncapsulation" type="selection"> |
|
578 <desc>Defines which EAP tunneling method is used with EAP-GTC.</desc> |
|
579 <option name="EAP-PEAP" value="25" /> |
|
580 <option name="EAP-TTLS" value="21" /> |
|
581 <option name="EAP-FAST" value="43" /> |
|
582 </setting> |
|
583 <setting name="EAP-TLS user name" ref="EapTlsUsername" type="string"> |
|
584 <desc>The username used with EAP-TLS.</desc> |
|
585 </setting> |
|
586 <setting name="EAP-TLS realm" ref="EapTlsRealm" type="string"> |
|
587 <desc>The realm used for device identification to the server.</desc> |
|
588 </setting> |
|
589 <setting name="EAP-TLS verify server realm" ref="EapTlsVerifyServerRealm" type="selection"> |
|
590 <desc>Specifies whether the server's realm is compared with own realm. |
|
591 This provides extra security but it depends on the network infrastructure and set-up whether this will work.</desc> |
|
592 <option name="No" value="No" /> |
|
593 <option name="Yes" value="Yes" /> |
|
594 </setting> |
|
595 <setting name="EAP-TLS require client authentication" ref="EapTlsRequireClientAuth" type="selection"> |
|
596 <desc>Specifies whether TLS requires that the server authenticates it (the client).</desc> |
|
597 <option name="No" value="No" /> |
|
598 <option name="Yes" value="Yes" /> |
|
599 </setting> |
|
600 <setting name="EAP-TLS session validity time" ref="EapTlsSessionValidityTime" type="int"> |
|
601 <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear)</desc> |
|
602 </setting> |
|
603 <setting name="EAP-TLS cipher suites" ref="EapTlsCipherSuites" type="string"> |
|
604 <desc>The list of allowed cipher suites. In the format +xxx,+xxx,+xxx... where xxx is the cipher suite identifier. |
|
605 004: TLS_RSA_WITH_RC4_128_MD5, 005: TLS_RSA_WITH_RC4_128_SHA, 010: TLS_RSA_WITH_3DES_EDE_CBC_SHA, |
|
606 019: TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA, 022: TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA, 047: TLS_RSA_WITH_AES_128_CBC_SHA |
|
607 050: TLS_DHE_DSS_WITH_AES_128_CBC_SHA, 051: TLS_DHE_RSA_WITH_AES_128_CBC_SHA, 052: TLS_DH_anon_WITH_AES_128_CBC_SHA |
|
608 For example +004 enables only RSA with RC4 and MD5. |
|
609 </desc> |
|
610 </setting> |
|
611 <setting name="EAP-TLS user certificate subject key id" ref="EapTlsUserCertSubjectKeyId" type="string"> |
|
612 <desc>The subject key id value of the user certificate. |
|
613 Currently this field is the only one that can be used to identify the certificate.</desc> |
|
614 </setting> |
|
615 <setting name="EAP-TLS user certificate issuer" ref="EapTlsUserCertIssuerName" type="string"> |
|
616 <desc>The issuer of the user certificate. Ignored by the implementation currently!</desc> |
|
617 </setting> |
|
618 <setting name="EAP-TLS user certificate serial number" ref="EapTlsUserCertSerialNumber" type="string"> |
|
619 <desc>The serial number of the user certificate. Ignored by the implementation currently!</desc> |
|
620 </setting> |
|
621 <setting name="EAP-TLS CA certificate subject key id" ref="EapTlsCaCertSubjectKeyId" type="string"> |
|
622 <desc>The subject key id value of the CA certificate. |
|
623 Currently this field is the only one that can be used to identify the certificate.</desc> |
|
624 </setting> |
|
625 <setting name="EAP-TLS CA certificate issuer" ref="EapTlsCaCertIssuerName" type="string"> |
|
626 <desc>The issuer of the CA certificate. Ignored by the implementation currently!</desc> |
|
627 </setting> |
|
628 <setting name="EAP-TLS CA certificate serial number" ref="EapTlsCaCertSerialNumber" type="string"> |
|
629 <desc>The serial number of the CA certificate. Ignored by the implementation currently!</desc> |
|
630 </setting> |
|
631 <setting name="EAP-TLS tunneling method" ref="EapTlsEncapsulation" type="selection"> |
|
632 <desc>Defines which EAP tunneling method is used with EAP-TLS.</desc> |
|
633 <option name="None" value="" /> |
|
634 <option name="EAP-PEAP" value="25" /> |
|
635 <option name="EAP-TTLS" value="21" /> |
|
636 <option name="EAP-FAST" value="43" /> |
|
637 </setting> |
|
638 <setting name="EAP-LEAP user name" ref="EapLeapUsername" type="string"> |
|
639 <desc>The username used with EAP-LEAP.</desc> |
|
640 </setting> |
|
641 <setting name="EAP-LEAP password" ref="EapLeapPassword" type="string"> |
|
642 <desc>The password used with EAP-LEAP.</desc> |
|
643 </setting> |
|
644 <setting name="EAP-LEAP session validity time" ref="EapLeapSessionValidityTime" type="int"> |
|
645 <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear).</desc> |
|
646 </setting> |
|
647 <setting name="EAP-SIM user name" ref="EapSimUsername" type="string"> |
|
648 <desc>The username used with EAP-SIM.</desc> |
|
649 </setting> |
|
650 <setting name="EAP-SIM realm" ref="EapSimRealm" type="string"> |
|
651 <desc>The realm used for device identification to the server.</desc> |
|
652 </setting> |
|
653 <setting name="EAP-SIM pseudonyms allowed" ref="EapSimUsePseudonyms" type="selection"> |
|
654 <desc>Specifies whether IMSI is sent always when authentication or is pseudonym usage allowed.</desc> |
|
655 <option name="No" value="No" /> |
|
656 <option name="Yes" value="Yes" /> |
|
657 </setting> |
|
658 <setting name="EAP-SIM session validity time" ref="EapSimSessionValidityTime" type="int"> |
|
659 <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear)</desc> |
|
660 </setting> |
|
661 <setting name="EAP-SIM tunneling method" ref="EapSimEncapsulation" type="selection"> |
|
662 <desc>Defines which EAP tunneling method is used with EAP-SIM.</desc> |
|
663 <option name="None" value="" /> |
|
664 <option name="EAP-PEAP" value="25" /> |
|
665 <option name="EAP-TTLS" value="21" /> |
|
666 <option name="EAP-FAST" value="43" /> |
|
667 </setting> |
|
668 <setting name="EAP-TTLS user name" ref="EapTtlsUsername" type="string"> |
|
669 <desc>The username used with EAP-TTLS.</desc> |
|
670 </setting> |
|
671 <setting name="EAP-TTLS realm" ref="EapTtlsRealm" type="string"> |
|
672 <desc>The realm used for device identification to the server.</desc> |
|
673 </setting> |
|
674 <setting name="EAP-TTLS verify server realm" ref="EapTtlsVerifyServerRealm" type="selection"> |
|
675 <desc>Specifies whether the server's realm is compared with own realm. |
|
676 This provides extra security but it depends on the network infrastructure and set-up whether this will work.</desc> |
|
677 <option name="No" value="No" /> |
|
678 <option name="Yes" value="Yes" /> |
|
679 </setting> |
|
680 <setting name="EAP-TTLS require client authentication" ref="EapTtlsRequireClientAuth" type="selection"> |
|
681 <desc>Specifies whether TTLS requires that the server authenticates it (the client).</desc> |
|
682 <option name="No" value="No" /> |
|
683 <option name="Yes" value="Yes" /> |
|
684 </setting> |
|
685 <setting name="EAP-TTLS session validity time" ref="EapTtlsSessionValidityTime" type="int"> |
|
686 <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear).</desc> |
|
687 </setting> |
|
688 <setting name="EAP-TTLS cipher suites" ref="EapTtlsCipherSuites" type="string"> |
|
689 <desc>The list of allowed cipher suites. In the format +xxx,+xxx,+xxx... where xxx is the cipher suite identifier. |
|
690 004: TLS_RSA_WITH_RC4_128_MD5, 005: TLS_RSA_WITH_RC4_128_SHA, 010: TLS_RSA_WITH_3DES_EDE_CBC_SHA, |
|
691 019: TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA, 022: TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA, 047: TLS_RSA_WITH_AES_128_CBC_SHA |
|
692 050: TLS_DHE_DSS_WITH_AES_128_CBC_SHA, 051: TLS_DHE_RSA_WITH_AES_128_CBC_SHA, 052: TLS_DH_anon_WITH_AES_128_CBC_SHA |
|
693 For example +004 enables only RSA with RC4 and MD5. |
|
694 </desc> |
|
695 </setting> |
|
696 <setting name="EAP-TTLS tunneled methods" ref="EapTtlsEncapsulatedTypes" type="string"> |
|
697 <desc>A list of Extensible Authentication Protocols (EAPs) in tunneled by EAP-TTLS. The format is +xxx,+xxx,+xxx where xxx indicates the enabled EAP method ID as |
|
698 specified in the IANA registry: http://www.iana.org/assignments/eap-numbers. For example to enable EAP-SIM encapsulation the string needs to be "+018". |
|
699 The list is in priority order, highest priority first. Note that the encapsulate type's encapsulation parameter needs to be configured accordingly. </desc> |
|
700 </setting> |
|
701 <setting name="EAP-TTLS user certificate subject key id" ref="EapTtlsUserCertSubjectKeyId" type="string"> |
|
702 <desc>The subject key id value of the user certificate. |
|
703 Currently this field is the only one that can be used to identify the certificate.</desc> |
|
704 </setting> |
|
705 <setting name="EAP-TTLS user certificate issuer" ref="EapTtlsUserCertIssuerName" type="string"> |
|
706 <desc>The issuer of the user certificate. Ignored by the implementation currently!</desc> |
|
707 </setting> |
|
708 <setting name="EAP-TTLS user certificate serial number" ref="EapTtlsUserCertSerialNumber" type="string"> |
|
709 <desc>The serial number of the user certificate. Ignored by the implementation currently!</desc> |
|
710 </setting> |
|
711 <setting name="EAP-TTLS CA certificate subject key id" ref="EapTtlsCaCertSubjectKeyId" type="string"> |
|
712 <desc>The subject key id value of the CA certificate. |
|
713 Currently this field is the only one that can be used to identify the certificate.</desc> |
|
714 </setting> |
|
715 <setting name="EAP-TTLS CA certificate issuer" ref="EapTtlsCaCertIssuerName" type="string"> |
|
716 <desc>The issuer of the CA certificate. Ignored by the implementation currently!</desc> |
|
717 </setting> |
|
718 <setting name="EAP-TTLS CA certificate serial number" ref="EapTtlsCaCertSerialNumber" type="string"> |
|
719 <desc>The serial number of the CA certificate. Ignored by the implementation currently!</desc> |
|
720 </setting> |
|
721 <setting name="EAP-AKA user name" ref="EapAkaUsername" type="string"> |
|
722 <desc>The username used with EAP-AKA.</desc> |
|
723 </setting> |
|
724 <setting name="EAP-AKA realm" ref="EapAkaRealm" type="string"> |
|
725 <desc>The realm used for device identification to the server.</desc> |
|
726 </setting> |
|
727 <setting name="EAP-AKA pseudonyms allowed" ref="EapAkaUsePseudonyms" type="selection"> |
|
728 <desc>Specifies whether IMSI is sent always when authentication or is pseudonym usage allowed.</desc> |
|
729 <option name="No" value="No" /> |
|
730 <option name="Yes" value="Yes" /> |
|
731 </setting> |
|
732 <setting name="EAP-AKA session validity time" ref="EapAkaSessionValidityTime" type="int"> |
|
733 <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear).</desc> |
|
734 </setting> |
|
735 <setting name="EAP-AKA tunneling method" ref="EapAkaEncapsulation" type="selection"> |
|
736 <desc>Defines which EAP tunneling method is used with EAP-AKA.</desc> |
|
737 <option name="None" value="" /> |
|
738 <option name="EAP-PEAP" value="25" /> |
|
739 <option name="EAP-TTLS" value="21" /> |
|
740 <option name="EAP-FAST" value="43" /> |
|
741 </setting> |
|
742 <setting name="EAP-PEAP user name" ref="EapPeapUsername" type="string"> |
|
743 <desc>The username used with EAP-PEAP.</desc> |
|
744 </setting> |
|
745 <setting name="EAP-PEAP realm" ref="EapPeapRealm" type="string"> |
|
746 <desc>The realm used for device identification to the server.</desc> |
|
747 </setting> |
|
748 <setting name="EAP-PEAP verify server realm" ref="EapPeapVerifyServerRealm" type="selection"> |
|
749 <desc>Specifies whether the server's realm is compared with own realm. |
|
750 This provides extra security but it depends on the network infrastructure and set-up whether this will work.</desc> |
|
751 <option name="No" value="No" /> |
|
752 <option name="Yes" value="Yes" /> |
|
753 </setting> |
|
754 <setting name="EAP-PEAP require client authentication" ref="EapPeapRequireClientAuth" type="selection"> |
|
755 <desc>Specifies whether PEAP requires that the server authenticates it (the client).</desc> |
|
756 <option name="No" value="No" /> |
|
757 <option name="Yes" value="Yes" /> |
|
758 </setting> |
|
759 <setting name="EAP-PEAP session validity time" ref="EapPeapSessionValidityTime" type="int"> |
|
760 <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear)</desc> |
|
761 </setting> |
|
762 <setting name="EAP-PEAP cipher suites" ref="EapPeapCipherSuites" type="string"> |
|
763 <desc>The list of allowed cipher suites. In the format +xxx,+xxx,+xxx... where xxx is the cipher suite identifier. |
|
764 004: TLS_RSA_WITH_RC4_128_MD5, 005: TLS_RSA_WITH_RC4_128_SHA, 010: TLS_RSA_WITH_3DES_EDE_CBC_SHA, |
|
765 019: TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA, 022: TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA, 047: TLS_RSA_WITH_AES_128_CBC_SHA |
|
766 050: TLS_DHE_DSS_WITH_AES_128_CBC_SHA, 051: TLS_DHE_RSA_WITH_AES_128_CBC_SHA, 052: TLS_DH_anon_WITH_AES_128_CBC_SHA |
|
767 For example +004 enables only RSA with RC4 and MD5. |
|
768 </desc> |
|
769 </setting> |
|
770 <setting name="EAP-PEAP version 0 allowed" ref="EapPeapV0Allowed" type="selection"> |
|
771 <desc>Is PEAP version 0 allowed. If in doubt enable only this one.</desc> |
|
772 <option name="No" value="No" /> |
|
773 <option name="Yes" value="Yes" /> |
|
774 </setting> |
|
775 <setting name="EAP-PEAP version 1 allowed" ref="EapPeapV1Allowed" type="selection"> |
|
776 <desc>Is PEAP version 1 allowed.</desc> |
|
777 <option name="No" value="No" /> |
|
778 <option name="Yes" value="Yes" /> |
|
779 </setting> |
|
780 <setting name="EAP-PEAP version 2 allowed" ref="EapPeapV2Allowed" type="selection"> |
|
781 <desc>Is PEAP version 2 allowed.</desc> |
|
782 <option name="No" value="No" /> |
|
783 <option name="Yes" value="Yes" /> |
|
784 </setting> |
|
785 <setting name="EAP-PEAP tunneled methods" ref="EapPeapEncapsulatedTypes" type="string"> |
|
786 <desc>A list of Extensible Authentication Protocols (EAPs) in tunneled by EAP-PEAP. The format is +xxx,+xxx,+xxx where xxx indicates the enabled EAP method ID as |
|
787 specified in the IANA registry: http://www.iana.org/assignments/eap-numbers. For example to enable EAP-SIM encapsulation the string needs to be "+018". |
|
788 The list is in priority order, highest priority first. Note that the encapsulate type's encapsulation parameter needs to be configured accordingly. </desc> |
|
789 </setting> |
|
790 <setting name="EAP-PEAP user certificate subject key id" ref="EapPeapUserCertSubjectKeyId" type="string"> |
|
791 <desc>The subject key id value of the user certificate. |
|
792 Currently this field is the only one that can be used to identify the certificate.</desc> |
|
793 </setting> |
|
794 <setting name="EAP-PEAP user certificate issuer" ref="EapPeapUserCertIssuerName" type="string"> |
|
795 <desc>The issuer of the user certificate. Ignored by the implementation currently!</desc> |
|
796 </setting> |
|
797 <setting name="EAP-PEAP user certificate serial number" ref="EapPeapUserCertSerialNumber" type="string"> |
|
798 <desc>The serial number of the user certificate. Ignored by the implementation currently!</desc> |
|
799 </setting> |
|
800 <setting name="EAP-PEAP CA certificate subject key id" ref="EapPeapCaCertSubjectKeyId" type="string"> |
|
801 <desc>The subject key id value of the CA certificate. |
|
802 Currently this field is the only one that can be used to identify the certificate.</desc> |
|
803 </setting> |
|
804 <setting name="EAP-PEAP CA certificate issuer" ref="EapPeapCaCertIssuerName" type="string"> |
|
805 <desc>The issuer of the CA certificate. Ignored by the implementation currently!</desc> |
|
806 </setting> |
|
807 <setting name="EAP-PEAP CA certificate serial number" ref="EapPeapCaCertSerialNumber" type="string"> |
|
808 <desc>The serial number of the CA certificate. Ignored by the implementation currently!</desc> |
|
809 </setting> |
|
810 <setting name="EAP-MSCHAPv2 user name" ref="EapMschapv2Username" type="string"> |
|
811 <desc>The username used with EAP-MSCHAPv2.</desc> |
|
812 </setting> |
|
813 <setting name="EAP-MSCHAPv2 password" ref="EapMschapv2Password" type="string"> |
|
814 <desc>The password used with EAP-MSCHAPv2.</desc> |
|
815 </setting> |
|
816 <setting name="EAP-MSCHAPv2 session validity time" ref="EapMschapv2SessionValidityTime" type="int"> |
|
817 <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear)</desc> |
|
818 </setting> |
|
819 <setting name="EAP-MSCHAPv2 tunneling method" ref="EapMschapv2Encapsulation" type="selection"> |
|
820 <desc>Defines which EAP tunneling method is used with EAP-MSCHAPv2.</desc> |
|
821 <option name="EAP-PEAP" value="25" /> |
|
822 <option name="EAP-TTLS" value="21" /> |
|
823 <option name="EAP-FAST" value="43" /> |
|
824 </setting> |
|
825 <setting name="EAP-FAST user name" ref="EapFastUsername" type="string"> |
|
826 <desc>The username used with EAP-FAST.</desc> |
|
827 </setting> |
|
828 <setting name="EAP-FAST realm" ref="EapFastRealm" type="string"> |
|
829 <desc>The realm used for device identification to the server.</desc> |
|
830 </setting> |
|
831 <setting name="EAP-FAST verify server realm" ref="EapFastVerifyServerRealm" type="selection"> |
|
832 <desc>Specifies whether the server's realm is compared with own realm. |
|
833 This provides extra security but it depends on the network infrastructure and set-up whether this will work.</desc> |
|
834 <option name="No" value="No" /> |
|
835 <option name="Yes" value="Yes" /> |
|
836 </setting> |
|
837 <setting name="EAP-FAST require client authentication" ref="EapFastRequireClientAuth" type="selection"> |
|
838 <desc>Specifies whether TTLS requires that the server authenticates it (the client).</desc> |
|
839 <option name="No" value="No" /> |
|
840 <option name="Yes" value="Yes" /> |
|
841 </setting> |
|
842 <setting name="EAP-FAST session validity time" ref="EapFastSessionValidityTime" type="int"> |
|
843 <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear)</desc> |
|
844 </setting> |
|
845 <setting name="EAP-FAST cipher suites" ref="EapFastCipherSuites" type="string"> |
|
846 <desc>The list of allowed cipher suites. In the format +xxx,+xxx,+xxx... where xxx is the cipher suite identifier. |
|
847 004: TLS_RSA_WITH_RC4_128_MD5, 005: TLS_RSA_WITH_RC4_128_SHA, 010: TLS_RSA_WITH_3DES_EDE_CBC_SHA, |
|
848 019: TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA, 022: TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA, 047: TLS_RSA_WITH_AES_128_CBC_SHA |
|
849 050: TLS_DHE_DSS_WITH_AES_128_CBC_SHA, 051: TLS_DHE_RSA_WITH_AES_128_CBC_SHA, 052: TLS_DH_anon_WITH_AES_128_CBC_SHA |
|
850 For example +004 enables only RSA with RC4 and MD5. |
|
851 </desc> |
|
852 </setting> |
|
853 <setting name="EAP-FAST tunneled methods" ref="EapFastEncapsulatedTypes" type="string"> |
|
854 <desc>A list of Extensible Authentication Protocols (EAPs) in tunneled by EAP-FAST. The format is +xxx,+xxx,+xxx where xxx indicates the enabled EAP method ID as |
|
855 specified in the IANA registry: http://www.iana.org/assignments/eap-numbers. For example to enable EAP-SIM encapsulation the string needs to be "+018". |
|
856 The list is in priority order, highest priority first. Note that the encapsulate type's encapsulation parameter needs to be configured accordingly. </desc> |
|
857 </setting> |
|
858 <setting name="EAP-FAST authenticated provisioning mode allowed" ref="EapFastAuthProvModeAllowed" type="selection"> |
|
859 <desc>EAP-FAST authenticated provisioning mode allowed</desc> |
|
860 <option name="No" value="No" /> |
|
861 <option name="Yes" value="Yes" /> |
|
862 </setting> |
|
863 <setting name="EAP-FAST unauthenticated provisioning mode allowed" ref="EapFastUnauthProvModeAllowed" type="selection"> |
|
864 <desc>EAP-FAST unauthenticated provisioning mode allowed</desc> |
|
865 <option name="No" value="No" /> |
|
866 <option name="Yes" value="Yes" /> |
|
867 </setting> |
|
868 <setting name="EAP-FAST warn ADHP no PAC" ref="EapFastWarnADHPNoPAC" type="selection"> |
|
869 <desc>EAP-FAST warn ADHP no PAC</desc> |
|
870 <option name="No" value="No" /> |
|
871 <option name="Yes" value="Yes" /> |
|
872 </setting> |
|
873 <setting name="EAP-FAST warn ADHP no matching PAC" ref="EapFastWarnADHPNoMatchingPAC" type="selection"> |
|
874 <desc>EAP-FAST warn ADHP no matching PAC</desc> |
|
875 <option name="No" value="No" /> |
|
876 <option name="Yes" value="Yes" /> |
|
877 </setting> |
|
878 <setting name="EAP-FAST warn not default server" ref="EapFastWarnNotDefaultServer" type="selection"> |
|
879 <desc>EAP-FAST warn not default server</desc> |
|
880 <option name="No" value="No" /> |
|
881 <option name="Yes" value="Yes" /> |
|
882 </setting> |
|
883 <setting name="EAP-FAST user certificate subject key id" ref="EapFastUserCertSubjectKeyId" type="string"> |
|
884 <desc>The subject key id value of the user certificate. |
|
885 Currently this field is the only one that can be used to identify the certificate.</desc> |
|
886 </setting> |
|
887 <setting name="EAP-FAST user certificate issuer" ref="EapFastUserCertIssuerName" type="string"> |
|
888 <desc>The issuer of the user certificate. Ignored by the implementation currently!</desc> |
|
889 </setting> |
|
890 <setting name="EAP-FAST user certificate serial number" ref="EapFastUserCertSerialNumber" type="string"> |
|
891 <desc>The serial number of the user certificate. Ignored by the implementation currently!</desc> |
|
892 </setting> |
|
893 <setting name="EAP-FAST CA certificate subject key id" ref="EapFastCaCertSubjectKeyId" type="string"> |
|
894 <desc>The subject key id value of the CA certificate. |
|
895 Currently this field is the only one that can be used to identify the certificate.</desc> |
|
896 </setting> |
|
897 <setting name="EAP-FAST CA certificate issuer" ref="EapFastCaCertIssuerName" type="string"> |
|
898 <desc>The issuer of the CA certificate. Ignored by the implementation currently!</desc> |
|
899 </setting> |
|
900 <setting name="EAP-FAST CA certificate serial number" ref="EapFastCaCertSerialNumber" type="string"> |
|
901 <desc>The serial number of the CA certificate. Ignored by the implementation currently!</desc> |
|
902 </setting> |
|
903 <setting name="MSCHAPv2 user name" ref="Mschapv2Username" type="string"> |
|
904 <desc>The username used with MSCHAPv2.</desc> |
|
905 </setting> |
|
906 <setting name="MSCHAPv2 password" ref="Mschapv2Password" type="string"> |
|
907 <desc>The password used with MSCHAPv2.</desc> |
|
908 </setting> |
|
909 <setting name="MSCHAPv2 session validity time" ref="Mschapv2SessionValidityTime" type="int"> |
|
910 <desc>Specifies how long single session is kept in memory (so no new password queries or similar appear).</desc> |
|
911 </setting> |
|
912 <setting name="MSCHAPv2 tunneling method" ref="Mschapv2Encapsulation" type="selection"> |
|
913 <desc>Defines which EAP tunneling method is used with MSCHAPv2. Needs to be EAP-TTLS.</desc> |
|
914 <option name="EAP-TTLS" value="21" /> |
|
915 </setting> |
|
916 </setting> |
|
917 </feature> |
|
918 <feature name="CSD Access Points" ref="CSD_APs"> |
|
919 <desc>Circuit-Switched Data connection methods</desc> |
|
920 <setting maxOccurs="99" minOccurs="0" name="CSD" ref="CSD_AP" type="sequence"> |
|
921 <setting name="Connection Name" ref="ConnectionName" type="string"> |
|
922 <desc>The CM name that is visible to the user.</desc> |
|
923 </setting> |
|
924 <setting name="Connection ID" ref="ConnectionId" type="int"> |
|
925 <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically. |
|
926 Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! |
|
927 So a good idea is to either specify all the IDs manually or none at all.</desc> |
|
928 </setting> |
|
929 <setting name="Protected" ref="Protected" type="selection"> |
|
930 <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc> |
|
931 <option name="No" value="No" /> |
|
932 <option name="Yes" value="Yes" /> |
|
933 </setting> |
|
934 <setting name="Hidden" ref="Hidden" type="selection"> |
|
935 <desc>Defines whether connection method is hidden.</desc> |
|
936 <option name="No" value="No" /> |
|
937 <option name="Yes" value="Yes" /> |
|
938 </setting> |
|
939 <setting name="Hidden Agent" ref="HiddenAgent" type="selection"> |
|
940 <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc> |
|
941 <option name="No" value="No" /> |
|
942 <option name="Yes" value="Yes" /> |
|
943 </setting> |
|
944 <setting name="Highlighted" ref="Highlighted" type="selection"> |
|
945 <desc>Connection method is highlighted or not.</desc> |
|
946 <option name="No" value="No" /> |
|
947 <option name="Yes" value="Yes" /> |
|
948 </setting> |
|
949 <setting name="Seamlessness" ref="Seamlessness" type="selection"> |
|
950 <desc>Defines whether an IAP can be roamed to.</desc> |
|
951 <option name="Confirm First" value="ConfirmFirst" /> |
|
952 <option name="Show Progress" value="ShowProgress" /> |
|
953 </setting> |
|
954 <setting name="User Name" ref="UserName" type="string"> |
|
955 <desc>Username for the connection.</desc> |
|
956 </setting> |
|
957 <setting name="Prompt Password" ref="PromptPassword" type="selection"> |
|
958 <desc>Prompt password on connection set-up time.</desc> |
|
959 <option name="No" value="No" /> |
|
960 <option name="Yes" value="Yes" /> |
|
961 </setting> |
|
962 <setting name="Password" ref="Password" type="string"> |
|
963 <desc>Password.</desc> |
|
964 </setting> |
|
965 <setting name="Password Authentication type" ref="PasswordAuthenticationType" type="selection"> |
|
966 <desc>Password authentication type.</desc> |
|
967 <option name="Normal" value="Normal" /> |
|
968 <option name="Secure" value="Secure" /> |
|
969 </setting> |
|
970 <setting name="WAP Gateway IP" ref="WAPGatewayIP" type="string"> |
|
971 <desc>WAP gateway IP.</desc> |
|
972 </setting> |
|
973 <setting name="Starting Page" ref="StartingPage" type="string"> |
|
974 <desc>Starting page.</desc> |
|
975 </setting> |
|
976 <setting name="WTLS Security" ref="WTLS_Security" type="selection"> |
|
977 <desc>WTLS security.</desc> |
|
978 <option name="On" value="On" /> |
|
979 <option name="Off" value="Off" /> |
|
980 </setting> |
|
981 <setting name="Connection type" ref="WAP_ConnectionType" type="selection"> |
|
982 <desc>Connection type.</desc> |
|
983 <option name="Continuous" value="Continuous" /> |
|
984 <option name="Temporary" value="Temporary" /> |
|
985 </setting> |
|
986 <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string"> |
|
987 <desc>IP address of the interface. |
|
988 Typically allocated automatically so this can be left empty.</desc> |
|
989 </setting> |
|
990 <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string"> |
|
991 <desc>Address of the primary DNS server that resolves host names. |
|
992 Typically allocated automatically so this can be left empty.</desc> |
|
993 </setting> |
|
994 <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string"> |
|
995 <desc>Address of the secondary DNS server to connect if the primary DNS server is not available. |
|
996 Typically allocated automatically so this can be left empty.</desc> |
|
997 </setting> |
|
998 <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string"> |
|
999 <desc>Address of the primary DNS server that resolves host names. |
|
1000 Typically allocated automatically so this can be left empty.</desc> |
|
1001 </setting> |
|
1002 <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string"> |
|
1003 <desc>Address of the secondary DNS server to connect if the primary DNS server is not available. |
|
1004 Typically allocated automatically so this can be left empty.</desc> |
|
1005 </setting> |
|
1006 <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string"> |
|
1007 <desc>Address of the HTTP/HTTPS proxy server.</desc> |
|
1008 </setting> |
|
1009 <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string"> |
|
1010 <desc>Port number of the HTTP/HTTPS proxy server.</desc> |
|
1011 </setting> |
|
1012 <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string"> |
|
1013 <desc>Name of the protocol for which this proxy can be used. |
|
1014 Typically http or https.</desc> |
|
1015 </setting> |
|
1016 <setting name="Default Tel Number (Mandatory)" ref="DefaultTelNumber" type="string"> |
|
1017 <desc>Default telephone number.</desc> |
|
1018 </setting> |
|
1019 <setting name="Bearer Speed" ref="BearerSpeed" type="selection"> |
|
1020 <desc>Bearer speed</desc> |
|
1021 <option name="Autodetect" value="Autodetect" /> |
|
1022 <option name="9600" value="9600" /> |
|
1023 <option name="14400" value="14400" /> |
|
1024 <option name="19200" value="19200" /> |
|
1025 <option name="28800" value="28800" /> |
|
1026 <option name="38400" value="38400" /> |
|
1027 <option name="43200" value="43200" /> |
|
1028 <option name="56000" value="56000" /> |
|
1029 </setting> |
|
1030 <setting name="Bearer Call Type Isdn" ref="BearerCallTypeIsdn" type="selection"> |
|
1031 <desc>Bearer Call Type Isdn</desc> |
|
1032 <option name="Analogue" value="Analogue" /> |
|
1033 <option name="Isdn v110" value="Isdn v110" /> |
|
1034 <option name="Isdn v120" value="Isdn v120" /> |
|
1035 </setting> |
|
1036 <setting name="Call back Enabled" ref="CallbackEnabled" type="selection"> |
|
1037 <desc>Is callback enabled.</desc> |
|
1038 <option name="Yes" value="Yes" /> |
|
1039 <option name="No" value="No" /> |
|
1040 </setting> |
|
1041 <setting name="Call back type" ref="CallbackType" type="selection"> |
|
1042 <desc>Callback type.</desc> |
|
1043 <option name="Server Number" value="Server Number" /> |
|
1044 <option name="Other Number" value="Other Number" /> |
|
1045 </setting> |
|
1046 <setting name="Call back number" ref="CallbackInfo" type="string"> |
|
1047 <desc>Callback number.</desc> |
|
1048 </setting> |
|
1049 <setting name="Enable PPP Compression" ref="EnableSWCompression" type="selection"> |
|
1050 <desc>Enable compression</desc> |
|
1051 <option name="Yes" value="Yes" /> |
|
1052 <option name="No" value="No" /> |
|
1053 </setting> |
|
1054 <setting name="Use Login Script" ref="UseLoginScript" type="selection"> |
|
1055 <desc>Use login script</desc> |
|
1056 <option name="No" value="No" /> |
|
1057 <option name="Yes" value="Yes" /> |
|
1058 </setting> |
|
1059 <setting name="Login Script" ref="LoginScript" type="string"> |
|
1060 <desc>Login script</desc> |
|
1061 </setting> |
|
1062 <setting name="Modem init string" ref="InitString" type="string"> |
|
1063 <desc>Modem init string</desc> |
|
1064 </setting> |
|
1065 </setting> |
|
1066 </feature> |
|
1067 <feature name="HSCD Access Points" ref="HSCSD_APs"> |
|
1068 <desc>High-speed Circuit-Switched Data connection methods</desc> |
|
1069 <setting maxOccurs="99" minOccurs="0" name="HSCSD" ref="HSCSD_AP" type="sequence"> |
|
1070 <setting name="Connection Name" ref="ConnectionName" type="string"> |
|
1071 <desc>The CM name that is visible to the user.</desc> |
|
1072 </setting> |
|
1073 <setting name="Connection ID" ref="ConnectionId" type="int"> |
|
1074 <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically. |
|
1075 Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! |
|
1076 So a good idea is to either specify all the IDs manually or none at all.</desc> |
|
1077 </setting> |
|
1078 <setting name="Protected" ref="Protected" type="selection"> |
|
1079 <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc> |
|
1080 <option name="No" value="No" /> |
|
1081 <option name="Yes" value="Yes" /> |
|
1082 </setting> |
|
1083 <setting name="Hidden" ref="Hidden" type="selection"> |
|
1084 <desc>Defines whether connection method is hidden.</desc> |
|
1085 <option name="No" value="No" /> |
|
1086 <option name="Yes" value="Yes" /> |
|
1087 </setting> |
|
1088 <setting name="Hidden Agent" ref="HiddenAgent" type="selection"> |
|
1089 <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc> |
|
1090 <option name="No" value="No" /> |
|
1091 <option name="Yes" value="Yes" /> |
|
1092 </setting> |
|
1093 <setting name="Highlighted" ref="Highlighted" type="selection"> |
|
1094 <desc>Connection method is highlighted or not.</desc> |
|
1095 <option name="No" value="No" /> |
|
1096 <option name="Yes" value="Yes" /> |
|
1097 </setting> |
|
1098 <setting name="Seamlessness" ref="Seamlessness" type="selection"> |
|
1099 <desc>Defines whether an IAP can be roamed to.</desc> |
|
1100 <option name="Confirm First" value="ConfirmFirst" /> |
|
1101 <option name="Show Progress" value="ShowProgress" /> |
|
1102 </setting> |
|
1103 <setting name="User Name" ref="UserName" type="string"> |
|
1104 <desc>User name</desc> |
|
1105 </setting> |
|
1106 <setting name="Prompt Password" ref="PromptPassword" type="selection"> |
|
1107 <desc>Prompt password at connection time.</desc> |
|
1108 <option name="No" value="No" /> |
|
1109 <option name="Yes" value="Yes" /> |
|
1110 </setting> |
|
1111 <setting name="Password" ref="Password" type="string"> |
|
1112 <desc>Password.</desc> |
|
1113 </setting> |
|
1114 <setting name="Password authentication type" ref="PasswordAuthenticationType" type="selection"> |
|
1115 <desc>Password authentication method.</desc> |
|
1116 <option name="Normal" value="Normal" /> |
|
1117 <option name="Secure" value="Secure" /> |
|
1118 </setting> |
|
1119 <setting name="WAP Gateway IP" ref="WAPGatewayIP" type="string"> |
|
1120 <desc>WAP gateway IP address.</desc> |
|
1121 </setting> |
|
1122 <setting name="Starting Page" ref="StartingPage" type="string"> |
|
1123 <desc>Start page of the connection method.</desc> |
|
1124 </setting> |
|
1125 <setting name="WTLS Security" ref="WTLS_Security" type="selection"> |
|
1126 <desc>Attempts a secure WTLS connection to the gateway.</desc> |
|
1127 <option name="On" value="On" /> |
|
1128 <option name="Off" value="Off" /> |
|
1129 </setting> |
|
1130 <setting name="Connection type" ref="WAP_ConnectionType" type="selection"> |
|
1131 <desc>Indicates whether a connection-oriented or connectionless API should be used.</desc> |
|
1132 <option name="Continuous" value="Continuous" /> |
|
1133 <option name="Temporary" value="Temporary" /> |
|
1134 </setting> |
|
1135 <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string"> |
|
1136 <desc>IP address of the interface. |
|
1137 Typically allocated automatically so this can be left empty.</desc> |
|
1138 </setting> |
|
1139 <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string"> |
|
1140 <desc>Address of the primary DNS server that resolves host names. |
|
1141 Typically allocated automatically so this can be left empty.</desc> |
|
1142 </setting> |
|
1143 <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string"> |
|
1144 <desc>Address of the secondary DNS server to connect if the primary DNS server is not available. |
|
1145 Typically allocated automatically so this can be left empty.</desc> |
|
1146 </setting> |
|
1147 <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string"> |
|
1148 <desc>Address of the primary DNS server that resolves host names. |
|
1149 Typically allocated automatically so this can be left empty.</desc> |
|
1150 </setting> |
|
1151 <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string"> |
|
1152 <desc>Address of the secondary DNS server to connect if the primary DNS server is not available. |
|
1153 Typically allocated automatically so this can be left empty.</desc> |
|
1154 </setting> |
|
1155 <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string"> |
|
1156 <desc>Address of the HTTP/HTTPS proxy server.</desc> |
|
1157 </setting> |
|
1158 <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string"> |
|
1159 <desc>Port number of the HTTP/HTTPS proxy server.</desc> |
|
1160 </setting> |
|
1161 <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string"> |
|
1162 <desc>Name of the protocol for which this proxy can be used. |
|
1163 Typically http or https.</desc> |
|
1164 </setting> |
|
1165 <setting name="Default Tel Number (Mandatory)" ref="DefaultTelNumber" type="string"> |
|
1166 <desc>Default telephone number.</desc> |
|
1167 </setting> |
|
1168 <setting name="Bearer Speed" ref="BearerSpeed" type="selection"> |
|
1169 <desc>Bearer speed</desc> |
|
1170 <option name="Autodetect" value="Autodetect" /> |
|
1171 <option name="9600" value="9600" /> |
|
1172 <option name="14400" value="14400" /> |
|
1173 <option name="19200" value="19200" /> |
|
1174 <option name="28800" value="28800" /> |
|
1175 <option name="38400" value="38400" /> |
|
1176 <option name="43200" value="43200" /> |
|
1177 <option name="56000" value="56000" /> |
|
1178 </setting> |
|
1179 <setting name="Bearer Call Type Isdn" ref="BearerCallTypeIsdn" type="selection"> |
|
1180 <desc>Bearer Call Type Isdn</desc> |
|
1181 <option name="Analogue" value="Analogue" /> |
|
1182 <option name="Isdn v110" value="Isdn v110" /> |
|
1183 <option name="Isdn v120" value="Isdn v120" /> |
|
1184 </setting> |
|
1185 <setting name="Call back Enabled" ref="CallbackEnabled" type="selection"> |
|
1186 <desc>Is callback enabled.</desc> |
|
1187 <option name="Yes" value="Yes" /> |
|
1188 <option name="No" value="No" /> |
|
1189 </setting> |
|
1190 <setting name="Call back type" ref="CallbackType" type="selection"> |
|
1191 <desc>Callback type.</desc> |
|
1192 <option name="Server Number" value="Server Number" /> |
|
1193 <option name="Other Number" value="Other Number" /> |
|
1194 </setting> |
|
1195 <setting name="Call back number" ref="CallbackInfo" type="string"> |
|
1196 <desc>Callback number.</desc> |
|
1197 </setting> |
|
1198 <setting name="Enable PPP Compression" ref="EnableSWCompression" type="selection"> |
|
1199 <desc>Enable compression</desc> |
|
1200 <option name="Yes" value="Yes" /> |
|
1201 <option name="No" value="No" /> |
|
1202 </setting> |
|
1203 <setting name="Use Login Script" ref="UseLoginScript" type="selection"> |
|
1204 <desc>Use login script</desc> |
|
1205 <option name="No" value="No" /> |
|
1206 <option name="Yes" value="Yes" /> |
|
1207 </setting> |
|
1208 <setting name="Login Script" ref="LoginScript" type="string"> |
|
1209 <desc>Login script</desc> |
|
1210 </setting> |
|
1211 <setting name="Modem init string" ref="InitString" type="string"> |
|
1212 <desc>Modem init string</desc> |
|
1213 </setting> |
|
1214 </setting> |
|
1215 </feature> |
|
1216 <feature name="LAN Access Points" ref="LAN_APs"> |
|
1217 <desc>LAN connection methods</desc> |
|
1218 <setting maxOccurs="99" minOccurs="0" name="LAN" ref="LAN_AP" type="sequence"> |
|
1219 <setting name="Connection Name" ref="ConnectionName" type="string"> |
|
1220 <desc>The CM name that is visible to the user.</desc> |
|
1221 </setting> |
|
1222 <setting name="Connection ID" ref="ConnectionId" type="int"> |
|
1223 <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically. |
|
1224 Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! |
|
1225 So a good idea is to either specify all the IDs manually or none at all.</desc> |
|
1226 </setting> |
|
1227 <setting name="Protected" ref="Protected" type="selection"> |
|
1228 <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc> |
|
1229 <option name="No" value="No" /> |
|
1230 <option name="Yes" value="Yes" /> |
|
1231 </setting> |
|
1232 <setting name="Hidden" ref="Hidden" type="selection"> |
|
1233 <desc>Defines whether connection method is hidden.</desc> |
|
1234 <option name="No" value="No" /> |
|
1235 <option name="Yes" value="Yes" /> |
|
1236 </setting> |
|
1237 <setting name="Hidden Agent" ref="HiddenAgent" type="selection"> |
|
1238 <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc> |
|
1239 <option name="No" value="No" /> |
|
1240 <option name="Yes" value="Yes" /> |
|
1241 </setting> |
|
1242 <setting name="Highlighted" ref="Highlighted" type="selection"> |
|
1243 <desc>Connection method is highlighted or not.</desc> |
|
1244 <option name="No" value="No" /> |
|
1245 <option name="Yes" value="Yes" /> |
|
1246 </setting> |
|
1247 <setting name="Seamlessness" ref="Seamlessness" type="selection"> |
|
1248 <desc>Defines whether an IAP can be roamed to.</desc> |
|
1249 <option name="Confirm First" value="ConfirmFirst" /> |
|
1250 <option name="Show Progress" value="ShowProgress" /> |
|
1251 </setting> |
|
1252 <setting name="WAP Gateway IP" ref="WAPGatewayIP" type="string"> |
|
1253 <desc>WAP gateway IP address.</desc> |
|
1254 </setting> |
|
1255 <setting name="Starting Page" ref="StartingPage" type="string"> |
|
1256 <desc>Start page of the connection method.</desc> |
|
1257 </setting> |
|
1258 <setting name="WTLS Security" ref="WTLS_Security" type="selection"> |
|
1259 <desc>Attempts a secure WTLS connection to the gateway.</desc> |
|
1260 <option name="On" value="On" /> |
|
1261 <option name="Off" value="Off" /> |
|
1262 </setting> |
|
1263 <setting name="Connection type" ref="WAP_ConnectionType" type="selection"> |
|
1264 <desc>Indicates whether a connection-oriented or connectionless API should be used.</desc> |
|
1265 <option name="Continuous" value="Continuous" /> |
|
1266 <option name="Temporary" value="Temporary" /> |
|
1267 </setting> |
|
1268 <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string"> |
|
1269 <desc>Address of the HTTP/HTTPS proxy server.</desc> |
|
1270 </setting> |
|
1271 <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string"> |
|
1272 <desc>Port number of the HTTP/HTTPS proxy server.</desc> |
|
1273 </setting> |
|
1274 <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string"> |
|
1275 <desc>Name of the protocol for which this proxy can be used. |
|
1276 Typically http or https.</desc> |
|
1277 </setting> |
|
1278 <setting name="LAN If Networks" ref="LanIfNetworks" type="string"> |
|
1279 <desc>LAN interface networks.</desc> |
|
1280 </setting> |
|
1281 <setting name="LAN IP Netmask" ref="LanIpNetmask" type="string"> |
|
1282 <desc>LAN interface netmask.</desc> |
|
1283 </setting> |
|
1284 <setting name="LAN IP Gateway" ref="LanIpGateway" type="string"> |
|
1285 <desc>LAN IP Gateway.</desc> |
|
1286 </setting> |
|
1287 <setting name="IPv4 Phone IP address" ref="PhoneIP" type="string"> |
|
1288 <desc>IP address of the interface. |
|
1289 Typically allocated automatically so this can be left empty.</desc> |
|
1290 </setting> |
|
1291 <setting name="IPv4 Primary Name Server" ref="PrimaryNameServer" type="string"> |
|
1292 <desc>Address of the primary DNS server that resolves host names. |
|
1293 Typically allocated automatically so this can be left empty.</desc> |
|
1294 </setting> |
|
1295 <setting name="IPv4 Secondary Name Server" ref="SecondaryNameServer" type="string"> |
|
1296 <desc>Address of the secondary DNS server to connect if the primary DNS server is not available. |
|
1297 Typically allocated automatically so this can be left empty.</desc> |
|
1298 </setting> |
|
1299 <setting name="IPv6 Primary Name Server" ref="PrimaryIP6NameServer" type="string"> |
|
1300 <desc>Address of the primary DNS server that resolves host names. |
|
1301 Typically allocated automatically so this can be left empty.</desc> |
|
1302 </setting> |
|
1303 <setting name="IPv6 Secondary Name Server" ref="SecondaryIP6NameServer" type="string"> |
|
1304 <desc>Address of the secondary DNS server to connect if the primary DNS server is not available. |
|
1305 Typically allocated automatically so this can be left empty.</desc> |
|
1306 </setting> |
|
1307 </setting> |
|
1308 </feature> |
|
1309 <feature name="VPN Access Points" ref="VPN_APs"> |
|
1310 <desc>Virtual Private Network connection methods</desc> |
|
1311 <setting maxOccurs="99" minOccurs="0" name="VPN" ref="VPN_AP" type="sequence"> |
|
1312 <setting name="Connection Name" ref="ConnectionName" type="string"> |
|
1313 <desc>The CM name that is visible to the user.</desc> |
|
1314 </setting> |
|
1315 <setting name="Connection ID" ref="ConnectionId" type="int"> |
|
1316 <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically. |
|
1317 Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! |
|
1318 So a good idea is to either specify all the IDs manually or none at all.</desc> |
|
1319 </setting> |
|
1320 <setting name="Protected" ref="Protected" type="selection"> |
|
1321 <desc>Defines whether connection method is protected (= cannot be edited by the user).</desc> |
|
1322 <option name="No" value="No" /> |
|
1323 <option name="Yes" value="Yes" /> |
|
1324 </setting> |
|
1325 <setting name="Hidden" ref="Hidden" type="selection"> |
|
1326 <desc>Defines whether connection method is hidden.</desc> |
|
1327 <option name="No" value="No" /> |
|
1328 <option name="Yes" value="Yes" /> |
|
1329 </setting> |
|
1330 <setting name="Hidden Agent" ref="HiddenAgent" type="selection"> |
|
1331 <desc>Connection method is hidden in CConnDlg or not (used to divide MMS and non-MMS CMs).</desc> |
|
1332 <option name="No" value="No" /> |
|
1333 <option name="Yes" value="Yes" /> |
|
1334 </setting> |
|
1335 <setting name="Highlighted" ref="Highlighted" type="selection"> |
|
1336 <desc>Connection method is highlighted or not.</desc> |
|
1337 <option name="No" value="No" /> |
|
1338 <option name="Yes" value="Yes" /> |
|
1339 </setting> |
|
1340 <setting name="Seamlessness" ref="Seamlessness" type="selection"> |
|
1341 <desc>Defines whether an IAP can be roamed to.</desc> |
|
1342 <option name="Confirm First" value="ConfirmFirst" /> |
|
1343 <option name="Show Progress" value="ShowProgress" /> |
|
1344 </setting> |
|
1345 <setting name="Proxy Server Address" ref="ProxyServerAddress" type="string"> |
|
1346 <desc>Address of the HTTP/HTTPS proxy server.</desc> |
|
1347 </setting> |
|
1348 <setting name="Proxy Port Number" ref="ProxyPortNumber" type="string"> |
|
1349 <desc>Port number of the HTTP/HTTPS proxy server.</desc> |
|
1350 </setting> |
|
1351 <setting name="Proxy protocol Name" ref="ProxyProtocolName" type="string"> |
|
1352 <desc>Name of the protocol for which this proxy can be used. |
|
1353 Typically http or https.</desc> |
|
1354 </setting> |
|
1355 <setting name="Underlying IAP Name" ref="IAP_Name" type="string"> |
|
1356 <desc>The network connection provider IAP name.</desc> |
|
1357 </setting> |
|
1358 <setting name="Service Policy" ref="ServicePolicy" type="string"> |
|
1359 <desc>Service policy.</desc> |
|
1360 </setting> |
|
1361 </setting> |
|
1362 </feature> |
|
1363 <feature name="Destination Networks" ref="DNs"> |
|
1364 <desc>Destination network (SNAP) definitions.</desc> |
|
1365 <setting maxOccurs="99" minOccurs="0" name="DN" ref="DN" type="sequence"> |
|
1366 <setting name="Name" ref="Name" type="string"> |
|
1367 <desc>The name that is visible to the user</desc> |
|
1368 </setting> |
|
1369 <setting name="Destination Network ID" ref="DNId" type="int"> |
|
1370 <desc>The CommsDat record id can be manually specified here. If left empty it is allocated automatically. |
|
1371 Note: It needs to be verified carefully that the IDs are globally unique if allocated manually! |
|
1372 So a good idea is to either specify all the IDs manually or none at all.</desc> |
|
1373 </setting> |
|
1374 <setting name="Metadata" ref="Metadata" type="selection"> |
|
1375 <desc>Metadata that specifies a few default destination networks that applications can use</desc> |
|
1376 <option name="User Defined" value="UserDefined" /> |
|
1377 <option name="Internet" value="Internet" /> |
|
1378 <option name="Operator" value="Operator" /> |
|
1379 <option name="MMS" value="MMS" /> |
|
1380 <option name="Intranet" value="Intranet" /> |
|
1381 </setting> |
|
1382 <setting name="Protection Level" ref="Protection" type="selection"> |
|
1383 <desc>DN protection level. Destination contents mean the connection methods inside the destination and their priorities. </desc> |
|
1384 <option name="No protection" value="0" /> |
|
1385 <option name="Destination and contents" value="1" /> |
|
1386 <option name="Destination" value="2" /> |
|
1387 </setting> |
|
1388 <setting name="Hidden" ref="Hidden" type="selection"> |
|
1389 <desc>Is DN hidden or not.</desc> |
|
1390 <option name="No" value="No" /> |
|
1391 <option name="Yes" value="Yes" /> |
|
1392 </setting> |
|
1393 <setting name="Hidden Agent" ref="HiddenAgent" type="selection"> |
|
1394 <desc>Is DN hidden in CConnDlg or not</desc> |
|
1395 <option name="No" value="No" /> |
|
1396 <option name="Yes" value="Yes" /> |
|
1397 </setting> |
|
1398 <setting name="Highlighted" ref="Highlighted" type="selection"> |
|
1399 <desc>Is DN highlighted or not.</desc> |
|
1400 <option name="No" value="No" /> |
|
1401 <option name="Yes" value="Yes" /> |
|
1402 </setting> |
|
1403 <setting name="Icon" ref="Icon" type="selection"> |
|
1404 <desc>Icon to be assigned to DN.</desc> |
|
1405 <option name="internet" value="0" /> |
|
1406 <option name="wap" value="1" /> |
|
1407 <option name="mms" value="2" /> |
|
1408 <option name="intranet" value="3" /> |
|
1409 <option name="operator" value="4" /> |
|
1410 <option name="icon1" value="5" /> |
|
1411 <option name="icon2" value="6" /> |
|
1412 <option name="icon3" value="7" /> |
|
1413 <option name="icon4" value="8" /> |
|
1414 <option name="icon5" value="9" /> |
|
1415 <option name="icon6" value="10" /> |
|
1416 <option name="default" value="11" /> |
|
1417 </setting> |
|
1418 <setting name="EmbeddedDN" ref="EmbeddedDN" type="string"> |
|
1419 <desc> |
|
1420 Name of an embedded DN that is bound to DN. |
|
1421 </desc> |
|
1422 </setting> |
|
1423 <setting name="IAP Name 1" ref="IAP" type="string"> |
|
1424 <desc> |
|
1425 Name of the Connection Method that is bound to DN. |
|
1426 </desc> |
|
1427 </setting> |
|
1428 <setting name="IAP Name 2" ref="IAP2" type="string"> |
|
1429 <desc> |
|
1430 Name of the Connection Method that is bound to DN. |
|
1431 </desc> |
|
1432 </setting> |
|
1433 <setting name="IAP Name 3" ref="IAP3" type="string"> |
|
1434 <desc> |
|
1435 Name of the Connection Method that is bound to DN. |
|
1436 </desc> |
|
1437 </setting> |
|
1438 <setting name="IAP Name 4" ref="IAP4" type="string"> |
|
1439 <desc> |
|
1440 Name of the Connection Method that is bound to DN. |
|
1441 </desc> |
|
1442 </setting> |
|
1443 <setting name="IAP Name 5" ref="IAP5" type="string"> |
|
1444 <desc> |
|
1445 Name of the Connection Method that is bound to DN. |
|
1446 </desc> |
|
1447 </setting> |
|
1448 <setting name="IAP Name 6" ref="IAP6" type="string"> |
|
1449 <desc> |
|
1450 Name of the Connection Method that is bound to DN. |
|
1451 </desc> |
|
1452 </setting> |
|
1453 <setting name="IAP Name 7" ref="IAP7" type="string"> |
|
1454 <desc> |
|
1455 Name of the Connection Method that is bound to DN. |
|
1456 </desc> |
|
1457 </setting> |
|
1458 <setting name="IAP Name 8" ref="IAP8" type="string"> |
|
1459 <desc> |
|
1460 Name of the Connection Method that is bound to DN. |
|
1461 </desc> |
|
1462 </setting> |
|
1463 <setting name="IAP Name 9" ref="IAP9" type="string"> |
|
1464 <desc> |
|
1465 Name of the Connection Method that is bound to DN. |
|
1466 </desc> |
|
1467 </setting> |
|
1468 <setting name="IAP Name 10" ref="IAP10" type="string"> |
|
1469 <desc> |
|
1470 Name of the Connection Method that is bound to DN. |
|
1471 </desc> |
|
1472 </setting> |
|
1473 </setting> |
|
1474 </feature> |
|
1475 <data> |
|
1476 <CSD_APs> |
|
1477 <CSD_AP template="true"> |
|
1478 <Protected>No</Protected> |
|
1479 <Hidden>No</Hidden> |
|
1480 <HiddenAgent>No</HiddenAgent> |
|
1481 <Highlighted>No</Highlighted> |
|
1482 <Seamlessness>ConfirmFirst</Seamlessness> |
|
1483 <PasswordAuthenticationType>Normal</PasswordAuthenticationType> |
|
1484 <WTLS_Security>On</WTLS_Security> |
|
1485 <WAP_ConnectionType>Continuous</WAP_ConnectionType> |
|
1486 <BearerSpeed>Autodetect</BearerSpeed> |
|
1487 <BearerCallTypeIsdn>Analogue</BearerCallTypeIsdn> |
|
1488 <CallbackEnabled>Yes</CallbackEnabled> |
|
1489 <CallbackType>Server Number</CallbackType> |
|
1490 <EnableSWCompression>No</EnableSWCompression> |
|
1491 <UseLoginScript>No</UseLoginScript> |
|
1492 <ConnectionName /> |
|
1493 <ConnectionId /> |
|
1494 <UserName /> |
|
1495 <PromptPassword /> |
|
1496 <Password /> |
|
1497 <WAPGatewayIP /> |
|
1498 <StartingPage /> |
|
1499 <PhoneIP /> |
|
1500 <PrimaryNameServer /> |
|
1501 <SecondaryNameServer /> |
|
1502 <PrimaryIP6NameServer /> |
|
1503 <SecondaryIP6NameServer /> |
|
1504 <ProxyServerAddress /> |
|
1505 <ProxyPortNumber /> |
|
1506 <ProxyProtocolName /> |
|
1507 <DefaultTelNumber /> |
|
1508 <CallbackInfo /> |
|
1509 <LoginScript /> |
|
1510 <InitString /> |
|
1511 </CSD_AP> |
|
1512 </CSD_APs> |
|
1513 <DNs> |
|
1514 <DN template="true"> |
|
1515 <Metadata>User Defined</Metadata> |
|
1516 <Protection>0</Protection> |
|
1517 <Hidden>No</Hidden> |
|
1518 <HiddenAgent>No</HiddenAgent> |
|
1519 <Highlighted>No</Highlighted> |
|
1520 <Icon>11</Icon> |
|
1521 <Name /> |
|
1522 <DNId /> |
|
1523 <EmbeddedDN /> |
|
1524 <IAP /> |
|
1525 <IAP2 /> |
|
1526 <IAP3 /> |
|
1527 <IAP4 /> |
|
1528 <IAP5 /> |
|
1529 <IAP6 /> |
|
1530 <IAP7 /> |
|
1531 <IAP8 /> |
|
1532 <IAP9 /> |
|
1533 <IAP10 /> |
|
1534 </DN> |
|
1535 <DN> |
|
1536 <Name>Internet</Name> |
|
1537 <DNId>1</DNId> |
|
1538 <Metadata>Internet</Metadata> |
|
1539 <Protection>2</Protection> |
|
1540 <Hidden>No</Hidden> |
|
1541 <HiddenAgent>No</HiddenAgent> |
|
1542 <Highlighted>Yes</Highlighted> |
|
1543 <Icon>0</Icon> |
|
1544 <EmbeddedDN /> |
|
1545 <IAP /> |
|
1546 <IAP2 /> |
|
1547 <IAP3 /> |
|
1548 <IAP4 /> |
|
1549 <IAP5 /> |
|
1550 <IAP6 /> |
|
1551 <IAP7 /> |
|
1552 <IAP8 /> |
|
1553 <IAP9 /> |
|
1554 <IAP10 /> |
|
1555 </DN> |
|
1556 <DN> |
|
1557 <Name>MMS</Name> |
|
1558 <DNId>2</DNId> |
|
1559 <Metadata>MMS</Metadata> |
|
1560 <Protection>2</Protection> |
|
1561 <Hidden>No</Hidden> |
|
1562 <HiddenAgent>Yes</HiddenAgent> |
|
1563 <Highlighted>No</Highlighted> |
|
1564 <Icon>2</Icon> |
|
1565 <EmbeddedDN /> |
|
1566 <IAP /> |
|
1567 <IAP2 /> |
|
1568 <IAP3 /> |
|
1569 <IAP4 /> |
|
1570 <IAP5 /> |
|
1571 <IAP6 /> |
|
1572 <IAP7 /> |
|
1573 <IAP8 /> |
|
1574 <IAP9 /> |
|
1575 <IAP10 /> |
|
1576 </DN> |
|
1577 <DN> |
|
1578 <Name>Operator</Name> |
|
1579 <DNId>3</DNId> |
|
1580 <Metadata>Operator</Metadata> |
|
1581 <Protection>2</Protection> |
|
1582 <Hidden>No</Hidden> |
|
1583 <HiddenAgent>No</HiddenAgent> |
|
1584 <Highlighted>No</Highlighted> |
|
1585 <Icon>4</Icon> |
|
1586 <EmbeddedDN /> |
|
1587 <IAP /> |
|
1588 <IAP2 /> |
|
1589 <IAP3 /> |
|
1590 <IAP4 /> |
|
1591 <IAP5 /> |
|
1592 <IAP6 /> |
|
1593 <IAP7 /> |
|
1594 <IAP8 /> |
|
1595 <IAP9 /> |
|
1596 <IAP10 /> |
|
1597 </DN> |
|
1598 </DNs> |
|
1599 <Global> |
|
1600 <Attachmode>whenavailable</Attachmode> |
|
1601 <DefaultDnIcon>11</DefaultDnIcon> |
|
1602 <DefaultConnectionType>Ask once</DefaultConnectionType> |
|
1603 <DefaultConnectionName /> |
|
1604 <DefaultAP /> |
|
1605 <WlanUseDefSettings>1</WlanUseDefSettings> |
|
1606 <WlanBGScanInterval>0</WlanBGScanInterval> |
|
1607 <WlanTxPowerLevel>100</WlanTxPowerLevel> |
|
1608 <WlanRadioMeasurements>1</WlanRadioMeasurements> |
|
1609 <WlanPowerMode>1</WlanPowerMode> |
|
1610 <PriorityLan>0</PriorityLan> |
|
1611 <PriorityWlan>1</PriorityWlan> |
|
1612 <PriorityPan>2</PriorityPan> |
|
1613 <PriorityGprsOut>3</PriorityGprsOut> |
|
1614 <PriorityGprsIn>4</PriorityGprsIn> |
|
1615 <PriorityCdma2k>5</PriorityCdma2k> |
|
1616 <PriorityDialOut>6</PriorityDialOut> |
|
1617 <PriorityDialIn>7</PriorityDialIn> |
|
1618 <PriorityVpn>253</PriorityVpn> |
|
1619 <PriorityMip>254</PriorityMip> |
|
1620 <UIPriorityLan>9</UIPriorityLan> |
|
1621 <UIPriorityWlan>0</UIPriorityWlan> |
|
1622 <UIPriorityPan>8</UIPriorityPan> |
|
1623 <UIPriorityGprsOut>1</UIPriorityGprsOut> |
|
1624 <UIPriorityGprsIn>2</UIPriorityGprsIn> |
|
1625 <UIPriorityCdma2k>3</UIPriorityCdma2k> |
|
1626 <UIPriorityDialOut>4</UIPriorityDialOut> |
|
1627 <UIPriorityDialIn>5</UIPriorityDialIn> |
|
1628 <UIPriorityVpn>6</UIPriorityVpn> |
|
1629 <UIPriorityMip>7</UIPriorityMip> |
|
1630 <WlanLongRetry>4</WlanLongRetry> |
|
1631 <WlanShortRetry>7</WlanShortRetry> |
|
1632 <WlanRTS>2347</WlanRTS> |
|
1633 <CsdLastSocketActivityTimeout>300</CsdLastSocketActivityTimeout> |
|
1634 <CsdLastSessionClosedTimeout>1</CsdLastSessionClosedTimeout> |
|
1635 <CsdLastSocketClosedTimeout>300</CsdLastSocketClosedTimeout> |
|
1636 <WlanLastSocketActivityTimeout>-1</WlanLastSocketActivityTimeout> |
|
1637 <WlanLastSessionClosedTimeout>1</WlanLastSessionClosedTimeout> |
|
1638 <WlanLastSocketClosedTimeout>-1</WlanLastSocketClosedTimeout> |
|
1639 <GprsLastSocketActivityTimeout>-1</GprsLastSocketActivityTimeout> |
|
1640 <GprsLastSessionClosedTimeout>1</GprsLastSessionClosedTimeout> |
|
1641 <GprsLastSocketClosedTimeout>-1</GprsLastSocketClosedTimeout> |
|
1642 </Global> |
|
1643 <APs> |
|
1644 <AP template="true"> |
|
1645 <Protected>No</Protected> |
|
1646 <Hidden>No</Hidden> |
|
1647 <HiddenAgent>No</HiddenAgent> |
|
1648 <Highlighted>No</Highlighted> |
|
1649 <Seamlessness>ConfirmFirst</Seamlessness> |
|
1650 <NetworkType>IPv4</NetworkType> |
|
1651 <PromptPassword>No</PromptPassword> |
|
1652 <PasswordAuthenticationType>Normal</PasswordAuthenticationType> |
|
1653 <WTLS_Security>On</WTLS_Security> |
|
1654 <WAP_ConnectionType>Continuous</WAP_ConnectionType> |
|
1655 <GprsUseEdge>Yes</GprsUseEdge> |
|
1656 <ConnectionName /> |
|
1657 <ConnectionId /> |
|
1658 <GPRS_AP_Name /> |
|
1659 <UserName /> |
|
1660 <Password /> |
|
1661 <WAPGatewayIP /> |
|
1662 <StartingPage /> |
|
1663 <PhoneIP /> |
|
1664 <PrimaryNameServer /> |
|
1665 <SecondaryNameServer /> |
|
1666 <PrimaryIP6NameServer /> |
|
1667 <SecondaryIP6NameServer /> |
|
1668 <ProxyServerAddress /> |
|
1669 <ProxyPortNumber /> |
|
1670 <ProxyProtocolName /> |
|
1671 <IspType /> |
|
1672 </AP> |
|
1673 <AP> |
|
1674 <Protected>No</Protected> |
|
1675 <Hidden>No</Hidden> |
|
1676 <HiddenAgent>No</HiddenAgent> |
|
1677 <Highlighted>No</Highlighted> |
|
1678 <Seamlessness>ConfirmFirst</Seamlessness> |
|
1679 <NetworkType>IPv4</NetworkType> |
|
1680 <PromptPassword>No</PromptPassword> |
|
1681 <PasswordAuthenticationType>Normal</PasswordAuthenticationType> |
|
1682 <WTLS_Security>On</WTLS_Security> |
|
1683 <WAP_ConnectionType>Continuous</WAP_ConnectionType> |
|
1684 <GprsUseEdge>Yes</GprsUseEdge> |
|
1685 <ConnectionName /> |
|
1686 <ConnectionId /> |
|
1687 <GPRS_AP_Name /> |
|
1688 <UserName /> |
|
1689 <Password /> |
|
1690 <WAPGatewayIP /> |
|
1691 <StartingPage /> |
|
1692 <PhoneIP /> |
|
1693 <PrimaryNameServer /> |
|
1694 <SecondaryNameServer /> |
|
1695 <PrimaryIP6NameServer /> |
|
1696 <SecondaryIP6NameServer /> |
|
1697 <ProxyServerAddress /> |
|
1698 <ProxyPortNumber /> |
|
1699 <ProxyProtocolName /> |
|
1700 <IspType /> |
|
1701 </AP> |
|
1702 </APs> |
|
1703 <HSCSD_APs> |
|
1704 <HSCSD_AP template="true"> |
|
1705 <Protected>No</Protected> |
|
1706 <Hidden>No</Hidden> |
|
1707 <HiddenAgent>No</HiddenAgent> |
|
1708 <Highlighted>No</Highlighted> |
|
1709 <Seamlessness>ConfirmFirst</Seamlessness> |
|
1710 <PromptPassword>No</PromptPassword> |
|
1711 <PasswordAuthenticationType>Normal</PasswordAuthenticationType> |
|
1712 <WTLS_Security>On</WTLS_Security> |
|
1713 <WAP_ConnectionType>Continuous</WAP_ConnectionType> |
|
1714 <BearerSpeed>Autodetect</BearerSpeed> |
|
1715 <BearerCallTypeIsdn>Analogue</BearerCallTypeIsdn> |
|
1716 <CallbackEnabled>Yes</CallbackEnabled> |
|
1717 <CallbackType>Server Number</CallbackType> |
|
1718 <EnableSWCompression>No</EnableSWCompression> |
|
1719 <UseLoginScript>No</UseLoginScript> |
|
1720 <ConnectionName /> |
|
1721 <ConnectionId /> |
|
1722 <UserName /> |
|
1723 <Password /> |
|
1724 <WAPGatewayIP /> |
|
1725 <StartingPage /> |
|
1726 <PhoneIP /> |
|
1727 <PrimaryNameServer /> |
|
1728 <SecondaryNameServer /> |
|
1729 <PrimaryIP6NameServer /> |
|
1730 <SecondaryIP6NameServer /> |
|
1731 <ProxyServerAddress /> |
|
1732 <ProxyPortNumber /> |
|
1733 <ProxyProtocolName /> |
|
1734 <DefaultTelNumber /> |
|
1735 <CallbackInfo /> |
|
1736 <LoginScript /> |
|
1737 <InitString /> |
|
1738 </HSCSD_AP> |
|
1739 </HSCSD_APs> |
|
1740 <LAN_APs> |
|
1741 <LAN_AP template="true"> |
|
1742 <Protected>No</Protected> |
|
1743 <Hidden>No</Hidden> |
|
1744 <HiddenAgent>No</HiddenAgent> |
|
1745 <Highlighted>No</Highlighted> |
|
1746 <Seamlessness>Confirm first</Seamlessness> |
|
1747 <WTLS_Security>On</WTLS_Security> |
|
1748 <WAP_ConnectionType>Continuous</WAP_ConnectionType> |
|
1749 <ConnectionName /> |
|
1750 <ConnectionId /> |
|
1751 <WAPGatewayIP /> |
|
1752 <StartingPage /> |
|
1753 <ProxyServerAddress /> |
|
1754 <ProxyPortNumber /> |
|
1755 <ProxyProtocolName /> |
|
1756 <LanIfNetworks /> |
|
1757 <LanIpNetmask /> |
|
1758 <LanIpGateway /> |
|
1759 <PhoneIP /> |
|
1760 <PrimaryNameServer /> |
|
1761 <SecondaryNameServer /> |
|
1762 <PrimaryIP6NameServer /> |
|
1763 <SecondaryIP6NameServer /> |
|
1764 </LAN_AP> |
|
1765 </LAN_APs> |
|
1766 <WLAN_APs> |
|
1767 <WLAN_AP template="true"> |
|
1768 <Protected>No</Protected> |
|
1769 <Hidden>No</Hidden> |
|
1770 <HiddenAgent>No</HiddenAgent> |
|
1771 <Highlighted>No</Highlighted> |
|
1772 <Seamlessness>ConfirmFirst</Seamlessness> |
|
1773 <NetworkMode>Infrastructure</NetworkMode> |
|
1774 <SecurityMode>Open</SecurityMode> |
|
1775 <WLANScanSSID>No</WLANScanSSID> |
|
1776 <WEPKeyInUse>key1</WEPKeyInUse> |
|
1777 <WEPAuthType>Shared</WEPAuthType> |
|
1778 <WEPKey1Length>64</WEPKey1Length> |
|
1779 <WEPKey1Format>ASCII</WEPKey1Format> |
|
1780 <WEPKey2Length>64</WEPKey2Length> |
|
1781 <WEPKey2Format>ASCII</WEPKey2Format> |
|
1782 <WEPKey3Length>64</WEPKey3Length> |
|
1783 <WEPKey3Format>ASCII</WEPKey3Format> |
|
1784 <WEPKey4Length>64</WEPKey4Length> |
|
1785 <WEPKey4Format>ASCII</WEPKey4Format> |
|
1786 <WPAUseOfPresharedKey>No</WPAUseOfPresharedKey> |
|
1787 <WPAKeyLength>0</WPAKeyLength> |
|
1788 <ConnectionName /> |
|
1789 <ConnectionId /> |
|
1790 <NetworkName /> |
|
1791 <StartingPage /> |
|
1792 <PrimaryNameServer /> |
|
1793 <SecondaryNameServer /> |
|
1794 <PrimaryIP6NameServer /> |
|
1795 <SecondaryIP6NameServer /> |
|
1796 <WlanIpGatewayAddress /> |
|
1797 <WlanIpNetMask /> |
|
1798 <ProxyServerAddress /> |
|
1799 <ProxyPortNumber /> |
|
1800 <ProxyProtocolName /> |
|
1801 <WlanChannelId /> |
|
1802 <PhoneIP /> |
|
1803 <WEPKey1Data /> |
|
1804 <WEPKey2Data /> |
|
1805 <WEPKey3Data /> |
|
1806 <WEPKey4Data /> |
|
1807 <WPAPresharedKey /> |
|
1808 <WPAListOfEAPs /> |
|
1809 <EapGtcUsername /> |
|
1810 <EapGtcSessionValidityTime /> |
|
1811 <EapGtcEncapsulation /> |
|
1812 <EapTlsUsername /> |
|
1813 <EapTlsRealm /> |
|
1814 <EapTlsVerifyServerRealm /> |
|
1815 <EapTlsRequireClientAuth /> |
|
1816 <EapTlsSessionValidityTime /> |
|
1817 <EapTlsCipherSuites /> |
|
1818 <EapTlsUserCertSubjectKeyId /> |
|
1819 <EapTlsUserCertIssuerName /> |
|
1820 <EapTlsUserCertSerialNumber /> |
|
1821 <EapTlsCaCertSubjectKeyId /> |
|
1822 <EapTlsCaCertIssuerName /> |
|
1823 <EapTlsCaCertSerialNumber /> |
|
1824 <EapTlsEncapsulation /> |
|
1825 <EapLeapUsername /> |
|
1826 <EapLeapPassword /> |
|
1827 <EapLeapSessionValidityTime /> |
|
1828 <EapSimUsername /> |
|
1829 <EapSimRealm /> |
|
1830 <EapSimUsePseudonyms /> |
|
1831 <EapSimSessionValidityTime /> |
|
1832 <EapSimEncapsulation /> |
|
1833 <EapTtlsUsername /> |
|
1834 <EapTtlsRealm /> |
|
1835 <EapTtlsVerifyServerRealm /> |
|
1836 <EapTtlsRequireClientAuth /> |
|
1837 <EapTtlsSessionValidityTime /> |
|
1838 <EapTtlsCipherSuites /> |
|
1839 <EapTtlsEncapsulatedTypes /> |
|
1840 <EapTtlsUserCertSubjectKeyId /> |
|
1841 <EapTtlsUserCertIssuerName /> |
|
1842 <EapTtlsUserCertSerialNumber /> |
|
1843 <EapTtlsCaCertSubjectKeyId /> |
|
1844 <EapTtlsCaCertIssuerName /> |
|
1845 <EapTtlsCaCertSerialNumber /> |
|
1846 <EapAkaUsername /> |
|
1847 <EapAkaRealm /> |
|
1848 <EapAkaUsePseudonyms /> |
|
1849 <EapAkaSessionValidityTime /> |
|
1850 <EapAkaEncapsulation /> |
|
1851 <EapPeapUsername /> |
|
1852 <EapPeapRealm /> |
|
1853 <EapPeapVerifyServerRealm /> |
|
1854 <EapPeapRequireClientAuth /> |
|
1855 <EapPeapSessionValidityTime /> |
|
1856 <EapPeapCipherSuites /> |
|
1857 <EapPeapV0Allowed /> |
|
1858 <EapPeapV1Allowed /> |
|
1859 <EapPeapV2Allowed /> |
|
1860 <EapPeapEncapsulatedTypes /> |
|
1861 <EapPeapUserCertSubjectKeyId /> |
|
1862 <EapPeapUserCertIssuerName /> |
|
1863 <EapPeapUserCertSerialNumber /> |
|
1864 <EapPeapCaCertSubjectKeyId /> |
|
1865 <EapPeapCaCertIssuerName /> |
|
1866 <EapPeapCaCertSerialNumber /> |
|
1867 <EapMschapv2Username /> |
|
1868 <EapMschapv2Password /> |
|
1869 <EapMschapv2SessionValidityTime /> |
|
1870 <EapMschapv2Encapsulation /> |
|
1871 <EapFastUsername /> |
|
1872 <EapFastRealm /> |
|
1873 <EapFastVerifyServerRealm /> |
|
1874 <EapFastRequireClientAuth /> |
|
1875 <EapFastSessionValidityTime /> |
|
1876 <EapFastCipherSuites /> |
|
1877 <EapFastEncapsulatedTypes /> |
|
1878 <EapFastAuthProvModeAllowed /> |
|
1879 <EapFastUnauthProvModeAllowed /> |
|
1880 <EapFastWarnADHPNoPAC /> |
|
1881 <EapFastWarnADHPNoMatchingPAC /> |
|
1882 <EapFastWarnNotDefaultServer /> |
|
1883 <EapFastUserCertSubjectKeyId /> |
|
1884 <EapFastUserCertIssuerName /> |
|
1885 <EapFastUserCertSerialNumber /> |
|
1886 <EapFastCaCertSubjectKeyId /> |
|
1887 <EapFastCaCertIssuerName /> |
|
1888 <EapFastCaCertSerialNumber /> |
|
1889 <Mschapv2Username /> |
|
1890 <Mschapv2Password /> |
|
1891 <Mschapv2SessionValidityTime /> |
|
1892 <Mschapv2Encapsulation /> |
|
1893 </WLAN_AP> |
|
1894 </WLAN_APs> |
|
1895 <VPN_APs> |
|
1896 <VPN_AP template="true"> |
|
1897 <Protected>No</Protected> |
|
1898 <Hidden>No</Hidden> |
|
1899 <HiddenAgent>No</HiddenAgent> |
|
1900 <Highlighted>No</Highlighted> |
|
1901 <Seamlessness>ConfirmFirst</Seamlessness> |
|
1902 <ConnectionName /> |
|
1903 <ConnectionId /> |
|
1904 <ProxyServerAddress /> |
|
1905 <ProxyPortNumber /> |
|
1906 <ProxyProtocolName /> |
|
1907 <IAP_Name /> |
|
1908 <ServicePolicy /> |
|
1909 </VPN_AP> |
|
1910 <VPN_AP> |
|
1911 <Protected>No</Protected> |
|
1912 <Hidden>No</Hidden> |
|
1913 <HiddenAgent>No</HiddenAgent> |
|
1914 <Highlighted>No</Highlighted> |
|
1915 <Seamlessness>ConfirmFirst</Seamlessness> |
|
1916 <ConnectionName /> |
|
1917 <ConnectionId /> |
|
1918 <ProxyServerAddress /> |
|
1919 <ProxyPortNumber /> |
|
1920 <ProxyProtocolName /> |
|
1921 <IAP_Name /> |
|
1922 <ServicePolicy /> |
|
1923 </VPN_AP> |
|
1924 </VPN_APs> |
|
1925 <KCRUidCommsDatCreator> |
|
1926 <KCommsDatCreatorStartupStatus>0</KCommsDatCreatorStartupStatus> |
|
1927 </KCRUidCommsDatCreator> |
|
1928 </data> |
|
1929 <rfs> |
|
1930 <KCRUidCommsDatCreator> |
|
1931 <KCommsDatCreatorStartupStatus>false</KCommsDatCreatorStartupStatus> |
|
1932 <KCommsDatCreatorInputFileName>false</KCommsDatCreatorInputFileName> |
|
1933 </KCRUidCommsDatCreator> |
|
1934 </rfs> |
|
1935 </configuration> |